board configs: drop NET_MULTI references
authorMike Frysinger <vapier@gentoo.org>
Sun, 2 Oct 2011 10:01:28 +0000 (10:01 +0000)
committerWolfgang Denk <wd@denx.de>
Wed, 5 Oct 2011 20:22:16 +0000 (22:22 +0200)
Now that none of the core checks CONFIG_NET_MULTI, there's not much point
in boards defining it.  So scrub all references to it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
341 files changed:
arch/arm/include/asm/arch-kirkwood/config.h
include/configs/A3000.h
include/configs/ADCIOP.h
include/configs/AP1000.h
include/configs/APC405.h
include/configs/AR405.h
include/configs/ASH405.h
include/configs/Alaska8220.h
include/configs/BAB7xx.h
include/configs/BC3450.h
include/configs/CATcenter.h
include/configs/CMS700.h
include/configs/CPC45.h
include/configs/CPCI405.h
include/configs/CPCI4052.h
include/configs/CPCI405AB.h
include/configs/CPCI405DT.h
include/configs/CPCI750.h
include/configs/CPCIISER4.h
include/configs/CRAYL1.h
include/configs/CU824.h
include/configs/DASA_SIM.h
include/configs/DB64360.h
include/configs/DB64460.h
include/configs/DU405.h
include/configs/DU440.h
include/configs/EB+MCF-EV123.h
include/configs/ELPPC.h
include/configs/EVB64260.h
include/configs/EXBITGEN.h
include/configs/G2000.h
include/configs/HH405.h
include/configs/HIDDEN_DRAGON.h
include/configs/HUB405.h
include/configs/IceCube.h
include/configs/JSE.h
include/configs/KAREF.h
include/configs/M5208EVBE.h
include/configs/M5235EVB.h
include/configs/M5253DEMO.h
include/configs/M5271EVB.h
include/configs/M5272C3.h
include/configs/M5275EVB.h
include/configs/M5282EVB.h
include/configs/M53017EVB.h
include/configs/M5329EVB.h
include/configs/M5373EVB.h
include/configs/M54451EVB.h
include/configs/M54455EVB.h
include/configs/M5475EVB.h
include/configs/M5485EVB.h
include/configs/MERGERBOX.h
include/configs/METROBOX.h
include/configs/MIP405.h
include/configs/MOUSSE.h
include/configs/MPC8308RDB.h
include/configs/MPC8313ERDB.h
include/configs/MPC8315ERDB.h
include/configs/MPC8323ERDB.h
include/configs/MPC832XEMDS.h
include/configs/MPC8349EMDS.h
include/configs/MPC8349ITX.h
include/configs/MPC8360EMDS.h
include/configs/MPC8360ERDK.h
include/configs/MPC837XEMDS.h
include/configs/MPC837XERDB.h
include/configs/MPC8536DS.h
include/configs/MPC8540ADS.h
include/configs/MPC8541CDS.h
include/configs/MPC8544DS.h
include/configs/MPC8548CDS.h
include/configs/MPC8555CDS.h
include/configs/MPC8560ADS.h
include/configs/MPC8568MDS.h
include/configs/MPC8569MDS.h
include/configs/MPC8572DS.h
include/configs/MPC8610HPCD.h
include/configs/MPC8641HPCN.h
include/configs/MUSENKI.h
include/configs/MVBC_P.h
include/configs/MVBLM7.h
include/configs/MVBLUE.h
include/configs/MigoR.h
include/configs/NETPHONE.h
include/configs/NETTA.h
include/configs/NETTA2.h
include/configs/OCRTC.h
include/configs/ORSG.h
include/configs/OXC.h
include/configs/P1022DS.h
include/configs/P1023RDS.h
include/configs/P1_P2_RDB.h
include/configs/P2020DS.h
include/configs/P2041RDB.h
include/configs/P3G4.h
include/configs/PCIPPC2.h
include/configs/PCIPPC6.h
include/configs/PIP405.h
include/configs/PK1C20.h
include/configs/PLU405.h
include/configs/PM520.h
include/configs/PM826.h
include/configs/PM828.h
include/configs/PMC405.h
include/configs/PMC405DE.h
include/configs/PMC440.h
include/configs/PN62.h
include/configs/PPChameleonEVB.h
include/configs/SBC8540.h
include/configs/SIMPC8313.h
include/configs/Sandpoint8240.h
include/configs/Sandpoint8245.h
include/configs/TOP860.h
include/configs/TQM5200.h
include/configs/TQM834x.h
include/configs/TQM85xx.h
include/configs/TQM862L.h
include/configs/TQM862M.h
include/configs/Total5200.h
include/configs/VCMA9.h
include/configs/VOH405.h
include/configs/VOM405.h
include/configs/W7OLMC.h
include/configs/W7OLMG.h
include/configs/WUH405.h
include/configs/Yukon8220.h
include/configs/ZUMA.h
include/configs/a320evb.h
include/configs/a4m072.h
include/configs/actux1.h
include/configs/actux2.h
include/configs/actux3.h
include/configs/actux4.h
include/configs/aev.h
include/configs/afeb9260.h
include/configs/alpr.h
include/configs/amcc-common.h
include/configs/ap325rxa.h
include/configs/apollon.h
include/configs/aria.h
include/configs/at91rm9200ek.h
include/configs/at91sam9260ek.h
include/configs/at91sam9261ek.h
include/configs/at91sam9263ek.h
include/configs/at91sam9m10g45ek.h
include/configs/atc.h
include/configs/atngw100.h
include/configs/atstk1002.h
include/configs/atstk1006.h
include/configs/bct-brettl2.h
include/configs/bf518f-ezbrd.h
include/configs/bf526-ezbrd.h
include/configs/bf527-ezkit.h
include/configs/bf533-ezkit.h
include/configs/bf533-stamp.h
include/configs/bf537-minotaur.h
include/configs/bf537-pnav.h
include/configs/bf537-srv1.h
include/configs/bf537-stamp.h
include/configs/bf538f-ezkit.h
include/configs/bf548-ezkit.h
include/configs/bf561-acvilon.h
include/configs/bf561-ezkit.h
include/configs/blackstamp.h
include/configs/blackvme.h
include/configs/ca9x4_ct_vxp.h
include/configs/cerf250.h
include/configs/cm-bf527.h
include/configs/cm-bf533.h
include/configs/cm-bf537e.h
include/configs/cm-bf537u.h
include/configs/cm-bf548.h
include/configs/cm-bf561.h
include/configs/cm4008.h
include/configs/cm41xx.h
include/configs/cm_t35.h
include/configs/cobra5272.h
include/configs/colibri_pxa270.h
include/configs/corenet_ds.h
include/configs/cpci5200.h
include/configs/cpu9260.h
include/configs/cpuat91.h
include/configs/cradle.h
include/configs/csb226.h
include/configs/csb272.h
include/configs/csb472.h
include/configs/da830evm.h
include/configs/da850evm.h
include/configs/davinci_dm355evm.h
include/configs/davinci_dm355leopard.h
include/configs/davinci_dm365evm.h
include/configs/davinci_dm6467evm.h
include/configs/davinci_dvevm.h
include/configs/davinci_schmoogie.h
include/configs/davinci_sffsdr.h
include/configs/davinci_sonata.h
include/configs/dbau1x00.h
include/configs/debris.h
include/configs/devkit8000.h
include/configs/dig297.h
include/configs/dnp5370.h
include/configs/dvlhost.h
include/configs/eNET.h
include/configs/eXalion.h
include/configs/ea20.h
include/configs/eb_cpux9k2.h
include/configs/edminiv2.h
include/configs/ep8248.h
include/configs/ep82xxm.h
include/configs/espt.h
include/configs/favr-32-ezkit.h
include/configs/gplugd.h
include/configs/gr_cpci_ax2000.h
include/configs/gr_ep2s60.h
include/configs/gr_xc3s_1500.h
include/configs/grasshopper.h
include/configs/grsim.h
include/configs/grsim_leon2.h
include/configs/gth2.h
include/configs/hammerhead.h
include/configs/hawkboard.h
include/configs/ibf-dsp561.h
include/configs/idmr.h
include/configs/igep0020.h
include/configs/imx27lite-common.h
include/configs/imx31_litekit.h
include/configs/imx31_phycore.h
include/configs/incaip.h
include/configs/innokom.h
include/configs/integratorap.h
include/configs/integratorcp.h
include/configs/ip04.h
include/configs/ipek01.h
include/configs/jadecpu.h
include/configs/jupiter.h
include/configs/km/km82xx-common.h
include/configs/km/km83xx-common.h
include/configs/km/km_arm.h
include/configs/korat.h
include/configs/kvme080.h
include/configs/linkstation.h
include/configs/lubbock.h
include/configs/lwmon5.h
include/configs/mecp5123.h
include/configs/mecp5200.h
include/configs/meesc.h
include/configs/microblaze-generic.h
include/configs/mimc200.h
include/configs/mpc5121ads.h
include/configs/mpc7448hpc2.h
include/configs/mpc8308_p1m.h
include/configs/mpq101.h
include/configs/ms7722se.h
include/configs/mx1ads.h
include/configs/mx25pdk.h
include/configs/mx31ads.h
include/configs/mx31pdk.h
include/configs/mx35pdk.h
include/configs/mx51evk.h
include/configs/mx53ard.h
include/configs/mx53evk.h
include/configs/mx53loco.h
include/configs/mx53smd.h
include/configs/nhk8815.h
include/configs/nios2-generic.h
include/configs/o2dnt.h
include/configs/omap1510inn.h
include/configs/omap1610h2.h
include/configs/omap1610inn.h
include/configs/omap2420h4.h
include/configs/omap3_beagle.h
include/configs/omap3_evm.h
include/configs/omap3_overo.h
include/configs/omap3_sdp3430.h
include/configs/omap5912osk.h
include/configs/omap730p2.h
include/configs/otc570.h
include/configs/p3mx.h
include/configs/p3p440.h
include/configs/pb1x00.h
include/configs/pcs440ep.h
include/configs/pdm360ng.h
include/configs/pdnb3.h
include/configs/pf5200.h
include/configs/pleb2.h
include/configs/pm9261.h
include/configs/pm9263.h
include/configs/pm9g45.h
include/configs/ppmc7xx.h
include/configs/pxa255_idp.h
include/configs/qemu-mips.h
include/configs/qong.h
include/configs/quad100hd.h
include/configs/r2dplus.h
include/configs/r7780mp.h
include/configs/rsk7203.h
include/configs/rsk7264.h
include/configs/sbc35_a9g20.h
include/configs/sbc405.h
include/configs/sbc8349.h
include/configs/sbc8548.h
include/configs/sbc8560.h
include/configs/sbc8641d.h
include/configs/sc3.h
include/configs/scb9328.h
include/configs/sh7757lcr.h
include/configs/sh7763rdp.h
include/configs/sh7785lcr.h
include/configs/smdk2410.h
include/configs/smdk6400.h
include/configs/smdkc100.h
include/configs/smdkv310.h
include/configs/snapper9260.h
include/configs/socrates.h
include/configs/sorcery.h
include/configs/spieval.h
include/configs/stxgp3.h
include/configs/stxssa.h
include/configs/stxxtc.h
include/configs/tb0229.h
include/configs/tcm-bf518.h
include/configs/tcm-bf537.h
include/configs/top9000.h
include/configs/trizepsiv.h
include/configs/tx25.h
include/configs/utx8245.h
include/configs/vct.h
include/configs/ve8313.h
include/configs/versatile.h
include/configs/vision2.h
include/configs/vme8349.h
include/configs/vpac270.h
include/configs/xaeniax.h
include/configs/xm250.h
include/configs/xpedite1000.h
include/configs/xpedite517x.h
include/configs/xpedite520x.h
include/configs/xpedite537x.h
include/configs/xpedite550x.h
include/configs/zeus.h
include/configs/zmx25.h

index b7dae1e..b393b1a 100644 (file)
@@ -91,7 +91,6 @@
 #ifdef CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_NETCONSOLE      /* include NetConsole support   */
-#define CONFIG_NET_MULTI       /* specify more that one ports available */
 #define CONFIG_MII             /* expose smi ove miiphy interface */
 #define CONFIG_MVGBE           /* Enable Marvell Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        /* detect link using phy */
index 3d60141..0c21bd8 100644 (file)
 #undef CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW           /* print pci devices @ startup  */
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support */
 
 /* #define CONFIG_TULIP */
 /* #define CONFIG_EEPRO100 */
index 6f12c8d..5cd8eef 100644 (file)
 #define CONFIG_PCI                     /* include pci support                  */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support         */
 
 #define CONFIG_TULIP
 
index 37dd757..fd074fb 100644 (file)
 #define CONFIG_SYS_JFFS2_NUM_BANKS     1
 #define CONFIG_SYS_JFFS2_FIRST_SECTOR  1
 
-#define CONFIG_NET_MULTI
 #define CONFIG_E1000
 
 #define CONFIG_SYS_ETH_DEV_FN          0x0800
index 0adf3ed..9a65cbc 100644 (file)
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_PPC4xx_EMAC
index 4963e9f..9994476 100644 (file)
@@ -73,7 +73,6 @@
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
-#define CONFIG_NET_MULTI
 
 
 /*
index ee80d9d..7f48499 100644 (file)
@@ -55,7 +55,6 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_PPC4xx_EMAC
index e050992..39c29ec 100644 (file)
@@ -97,7 +97,6 @@
 #define CONFIG_CMD_SNTP
 
 
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 
 /*
index 1497cae..a3e8820 100644 (file)
@@ -467,7 +467,6 @@ extern  unsigned long           bab7xx_get_gclk_freq (void);
 
 #define CONFIG_SYS_L2_BAB7xx
 
-#define CONFIG_NET_MULTI                /* Multi ethernet cards support */
 #define CONFIG_TULIP
 #define CONFIG_TULIP_SELECT_MEDIA
 
index a833893..8a73a9a 100644 (file)
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
-#define CONFIG_NET_MULTI       1
 /*#define CONFIG_EEPRO100      XXX - FIXME: conflicts when CONFIG_MII is enabled */
 #define CONFIG_SYS_RX_ETH_BUFFER       8       /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
index 0b75a4e..84e4e78 100644 (file)
 
 #define CONFIG_PPC4xx_EMAC
 #undef CONFIG_EXT_PHY
-#define CONFIG_NET_MULTI       1
 
 #define CONFIG_MII             1       /* MII PHY management           */
 #ifndef         CONFIG_EXT_PHY
index daaf624..63d838f 100644 (file)
@@ -55,7 +55,6 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
 #define CONFIG_PPC4xx_EMAC
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_MII             1       /* MII PHY management           */
index 17282aa..ed3f9e1 100644 (file)
 #undef CONFIG_PCI_PNP
 #undef CONFIG_PCI_SCAN_SHOW
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support         */
 
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8       /* use 8 rx buffer on eepro100  */
index 426fc57..cf1d1b3 100644 (file)
@@ -61,7 +61,6 @@
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
 #define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
 
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 /*
index 8f48ded..d17458e 100644 (file)
@@ -63,7 +63,6 @@
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
 #define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
 
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_RTC_M48T35A     1               /* ST Electronics M48 timekeeper */
index a042abf..a0d16d2 100644 (file)
@@ -63,7 +63,6 @@
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
 #define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
 
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_RTC_M48T35A     1               /* ST Electronics M48 timekeeper */
index 9b99ba8..98b8ef5 100644 (file)
@@ -62,7 +62,6 @@
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
 #define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
 
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_RTC_M48T35A     1               /* ST Electronics M48 timekeeper */
index 92ffaaa..d735e61 100644 (file)
 #define CONFIG_MPSC_PORT       0
 
 /* to change the default ethernet port, use this define (options: 0, 1, 2) */
-#define CONFIG_NET_MULTI
 #define MV_ETH_DEVS            1
 #define CONFIG_ETHER_PORT      0
 
index b2ee873..35daed0 100644 (file)
@@ -56,7 +56,6 @@
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
-#define CONFIG_NET_MULTI
 
 
 /*
index 885d42b..4aaceb7 100644 (file)
@@ -52,7 +52,6 @@
 #define        CONFIG_PHY_ADDR         1       /* PHY address; handling of ENET */
 #define CONFIG_BOARD_EARLY_INIT_F 1    /* early setup for 405gp */
 #define CONFIG_MISC_INIT_R     1       /* so that a misc_init_r() is called */
-#define CONFIG_NET_MULTI
 
 #define CONFIG_CONS_INDEX      1       /* Use UART0                    */
 #define CONFIG_SYS_NS16550
index e2229b0..77414ab 100644 (file)
 #define CONFIG_PCI                     /* include pci support                  */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support         */
 
 #define CONFIG_TULIP
 #define CONFIG_TULIP_USE_IO
index 53229d9..6fe7fd3 100644 (file)
 #define CONFIG_PCI                     /* include pci support                  */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support         */
 
 #define CONFIG_TULIP
 
index dbd224c..1f825fd 100644 (file)
@@ -158,7 +158,6 @@ if we use PCI it has its own MAC addr */
 #define CONFIG_MPSC_PORT       0
 
 /* to change the default ethernet port, use this define (options: 0, 1, 2) */
-#define CONFIG_NET_MULTI
 #define MV_ETH_DEVS 2
 
 /* #undef CONFIG_ETHER_PORT_MII         */
index 321692b..4218774 100644 (file)
@@ -96,7 +96,6 @@
 #define CONFIG_MPSC_PORT       0
 
 /* to change the default ethernet port, use this define (options: 0, 1, 2) */
-#define CONFIG_NET_MULTI
 #define MV_ETH_DEVS 3
 
 /* #undef CONFIG_ETHER_PORT_MII         */
index 1493f75..24df85a 100644 (file)
@@ -57,7 +57,6 @@
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
 #define CONFIG_RESET_PHY_R      1       /* use reset_phy() to disable phy sleep mode */
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 /*
index ceab604..8bd7940 100644 (file)
@@ -269,7 +269,6 @@ int du440_phy_addr(int devnum);
 #define CONFIG_HAS_ETH0
 #define CONFIG_SYS_RX_ETH_BUFFER       128
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1                1       /* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR       du440_phy_addr(1)
 
index 0333925..1f774a9 100644 (file)
  *----------------------------------------------------------------------*/
 
 #define CONFIG_MCFFEC
-#define CONFIG_NET_MULTI               1
 #define CONFIG_MII                     1
 #define CONFIG_MII_INIT                        1
 #define CONFIG_SYS_DISCOVER_PHY
index 8cce70c..220372c 100644 (file)
 #endif
 #define L2_ENABLE   (L2_INIT | L2CR_L2E)
 
-#define CONFIG_NET_MULTI        /* Multi ethernet cards support */
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
index 9a68b1c..b905402 100644 (file)
@@ -78,7 +78,6 @@
 #define        CONFIG_MPSC
 #define CONFIG_MPSC_PORT       0
 
-#define CONFIG_NET_MULTI        /* attempt all available adapters */
 
 /* define this if you want to enable GT MAC filtering */
 #define CONFIG_GT_USE_MAC_HASH_TABLE
index f7b5bc9..43c8842 100644 (file)
@@ -81,7 +81,6 @@
 
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
-#define CONFIG_NET_MULTI
 
 
 /*
index af602ff..d64dd8d 100644 (file)
@@ -80,7 +80,6 @@
 
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
-#define CONFIG_NET_MULTI       1
 
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
index a15e686..4a41b5c 100644 (file)
@@ -67,7 +67,6 @@
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
 #define CONFIG_PPC4xx_EMAC
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_MII             1       /* MII PHY management           */
index 44ae48d..8f4e544 100644 (file)
@@ -95,7 +95,6 @@
 #define CONFIG_PCI                             /* include pci support          */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI                       /* Multi ethernet cards support */
 
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
 
index 827ecf2..afb8273 100644 (file)
@@ -62,7 +62,6 @@
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
 
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
-#define CONFIG_NET_MULTI
 
 
 /*
index bc5d761..135ef55 100644 (file)
@@ -79,7 +79,6 @@
 
 #define CONFIG_SYS_XLB_PIPELINING      1
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
index c38e0d2..ef652b2 100644 (file)
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                1       /* PHY address                  */
-#define CONFIG_NET_MULTI
 
 
 /*
index fcf66b7..06fa676 100644 (file)
  *----------------------------------------------------------------------*/
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII           1              /* MII PHY management      */
-#define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR              0xff           /* no phy on EMAC0         */
 #define CONFIG_PHY1_ADDR      0xff          /* no phy on EMAC1         */
 #define CONFIG_PHY2_ADDR      0x08          /* PHY addr, MGMT, EMAC2   */
index a45cdc1..6f462be 100644 (file)
@@ -57,7 +57,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index cd12d2b..7bb6dfe 100644 (file)
@@ -75,7 +75,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index 7a44cf7..b843e07 100644 (file)
@@ -88,7 +88,6 @@
 #      define CONFIG_SYS_ATA_STRIDE            4       /* Interval between registers */
 #endif
 
-#define CONFIG_NET_MULTI               1
 #define CONFIG_DRIVER_DM9000
 #ifdef CONFIG_DRIVER_DM9000
 #      define CONFIG_DM9000_BASE       (CONFIG_SYS_CS1_BASE | 0x300)
index 992d738..1d3b5c3 100644 (file)
@@ -90,7 +90,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index b3c774f..de15163 100644 (file)
@@ -89,7 +89,6 @@
 #define CONFIG_BOOTDELAY       5
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index 56a760f..e34dc40 100644 (file)
@@ -87,7 +87,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1
 #define CONFIG_MII_INIT                1
 #define CONFIG_SYS_DISCOVER_PHY
index 0c10480..928b044 100644 (file)
@@ -74,7 +74,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index d205e7c..216244c 100644 (file)
@@ -64,7 +64,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index 3adcf4d..67cdff1 100644 (file)
@@ -68,7 +68,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index 71b5af6..d0044b1 100644 (file)
@@ -68,7 +68,6 @@
 
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index de88383..e2e2445 100644 (file)
@@ -82,7 +82,6 @@
 /* Network configuration */
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index 2662b35..d934d8e 100644 (file)
@@ -85,7 +85,6 @@
 /* Network configuration */
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index 6e0bef5..f31972c 100644 (file)
@@ -67,7 +67,6 @@
 
 #define CONFIG_FSLDMAFEC
 #ifdef CONFIG_FSLDMAFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_HAS_ETH1
index f3a295c..813f0cb 100644 (file)
@@ -67,7 +67,6 @@
 
 #define CONFIG_FSLDMAFEC
 #ifdef CONFIG_FSLDMAFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_HAS_ETH1
index f9681cd..da924c8 100644 (file)
 /*
  * TSEC
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_GMII                    /* MII PHY management */
 #define CONFIG_SYS_VSC8601_SKEWFIX
 #define        CONFIG_SYS_VSC8601_SKEW_TX      3
index 9b83e21..c75a256 100644 (file)
  *----------------------------------------------------------------------*/
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII           1              /* MII PHY management      */
-#define CONFIG_NET_MULTI      1
 #define CONFIG_PHY_ADDR              0xff           /* no phy on EMAC0         */
 #define CONFIG_PHY1_ADDR      0xff          /* no phy on EMAC1         */
 #define CONFIG_PHY2_ADDR      0x08          /* PHY addr, MGMT, EMAC2   */
index ce9273b..247cd2f 100644 (file)
 #define CONFIG_PHY_ADDR                1       /* PHY address                  */
 #define CONFIG_PHY_RESET_DELAY 300     /* Intel LXT971A needs this */
 #define CONFIG_PHY_CMD_DELAY   40      /* Intel LXT971A needs this */
-#define CONFIG_NET_MULTI
 /************************************************************
  * RTC
  ***********************************************************/
index c809a6b..f7fba0c 100644 (file)
 #define CONFIG_PCI                     /* include pci support                  */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support         */
 
 #define CONFIG_TULIP
 
index 3ff175c..210b602 100644 (file)
 /*
  * TSEC
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_TSEC_ENET       /* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET        0x24000
 #define CONFIG_SYS_TSEC1       (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
index 92c54d0..7f52bb1 100644 (file)
  */
 #define CONFIG_TSEC_ENET               /* TSEC ethernet support */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_GMII                    /* MII PHY management */
 
 #ifdef CONFIG_TSEC1
index a0cfd00..ec86949 100644 (file)
 #define CONFIG_PCI
 #define CONFIG_PCIE
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
 #define CONFIG_EEPRO100
 #undef CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_HAS_FSL_DR_USB
 #define CONFIG_SYS_SCCR_USBDRCM                3
 
index 4d4c758..a8657b1 100644 (file)
 
 #ifdef CONFIG_PCI
 #define CONFIG_PCI_SKIP_HOST_BRIDGE
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 
 #endif /* CONFIG_PCI */
 
-
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 /*
  * QE UEC ethernet configuration
  */
index f136a8e..823b9f1 100644 (file)
 
 #ifdef CONFIG_PCI
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_83XX_PCI_STREAMING
 
 
 #endif /* CONFIG_PCI */
 
-
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 /*
  * QE UEC ethernet configuration
  */
index da2b11d..865d317 100644 (file)
 #undef PCI_ONE_PCI1
 #endif
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_83XX_PCI_STREAMING
 
 #define CONFIG_TSEC_ENET               /* TSEC ethernet support */
 
 #if defined(CONFIG_TSEC_ENET)
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
 
 #define CONFIG_GMII            1       /* MII PHY management */
 #define CONFIG_TSEC1   1
index de233ff..4999004 100644 (file)
@@ -384,7 +384,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 #define CONFIG_SYS_PCI2_IO_SIZE        0x01000000      /* 16M */
 #endif
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #ifndef CONFIG_PCI_PNP
@@ -408,7 +407,6 @@ boards, we say we have two, but don't display a message if we find only one. */
 
 #ifdef CONFIG_TSEC_ENET
 
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 #define CONFIG_PHY_GIGE                /* In case CONFIG_CMD_MII is specified */
 
index 49d64a5..63034d2 100644 (file)
 
 #ifdef CONFIG_PCI
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_83XX_PCI_STREAMING
 
 #endif /* CONFIG_PCI */
 
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_HWCONFIG                1
 
 /*
index 851872a..909e8ab 100644 (file)
 
 #ifdef CONFIG_PCI
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 
 #endif /* CONFIG_PCI */
 
-
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 /*
  * QE UEC ethernet configuration
  */
index abccfd6..03aedec 100644 (file)
@@ -385,7 +385,6 @@ extern int board_pci_host_broken(void);
 
 #define CONFIG_HAS_FSL_DR_USB  1 /* fixup device tree for the DR USB */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -393,10 +392,6 @@ extern int board_pci_host_broken(void);
 #define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x1957  /* Freescale */
 #endif /* CONFIG_PCI */
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 /*
  * TSEC
  */
index ea3056b..d0e4b2c 100644 (file)
 #define CONFIG_SYS_PCIE2_IO_SIZE       0x00800000
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
 #undef CONFIG_PCI_SCAN_SHOW    /* show pci devices on startup */
  */
 #ifdef CONFIG_TSEC_ENET
 
-#define CONFIG_NET_MULTI
 #define CONFIG_GMII                    /* MII PHY management */
 
 #define CONFIG_TSEC1
index f3d325a..3efe937 100644 (file)
 
 #if defined(CONFIG_PCI)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 /*PCIE video card used*/
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1   1
index fc0edac..301efbe 100644 (file)
 
 #if defined(CONFIG_PCI)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "TSEC0"
index ae19036..b2503a4 100644 (file)
@@ -331,7 +331,6 @@ extern unsigned long get_clock_freq(void);
 #if defined(CONFIG_PCI)
 
 #define CONFIG_MPC85XX_PCI2
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -345,10 +344,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "TSEC0"
index 6b03d27..97b5569 100644 (file)
@@ -320,7 +320,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 #endif
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -350,10 +349,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1   1
index aca77ff..63e23c2 100644 (file)
@@ -377,7 +377,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_PCI)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -390,10 +389,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "eTSEC0"
index 93d4c3e..efd4280 100644 (file)
@@ -328,7 +328,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_PCI)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_MPC85XX_PCI2
 
@@ -343,10 +342,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "TSEC0"
index e03fea3..8cf2bf2 100644 (file)
 
 #if defined(CONFIG_PCI)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 
 #ifdef CONFIG_TSEC_ENET
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #ifndef CONFIG_MII
 #define CONFIG_MII             1       /* MII PHY management */
 #endif
index cf0ea47..994e7ae 100644 (file)
@@ -347,7 +347,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_PCI)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -358,10 +357,6 @@ extern unsigned long get_clock_freq(void);
 
 #endif /* CONFIG_PCI */
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #if defined(CONFIG_TSEC_ENET)
 
 #define CONFIG_MII             1       /* MII PHY management */
index dd7278c..a4734eb 100644 (file)
@@ -480,7 +480,6 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_PCI)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
@@ -491,10 +490,6 @@ extern unsigned long get_clock_freq(void);
 
 #endif /* CONFIG_PCI */
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 /*
  * Environment
  */
index 6067e60..da20278 100644 (file)
 #define CONFIG_SYS_ISA_IO_BASE_ADDRESS VIDEO_IO_OFFSET
 #endif
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1   1
index 31dbc3b..c90b69d 100644 (file)
 
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_CMD_NET
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_CMD_REGINFO
index 0ddb76f..2bd67c3 100644 (file)
@@ -371,7 +371,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #define CONFIG_RTL8139
@@ -428,10 +427,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 
 #define CONFIG_TSEC1           1
index 27ebceb..f304272 100644 (file)
@@ -90,7 +90,6 @@
 #define CONFIG_PCI                     /* include pci support          */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support */
 
 #define CONFIG_TULIP
 
index 6f4d187..ade4893 100644 (file)
 /*
  * Ethernet configuration
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT 5
 
 #define CONFIG_E1000
index c201310..31c85e2 100644 (file)
 #define CONFIG_SYS_PCI1_IO_PHYS        0xE2000000
 #define CONFIG_SYS_PCI1_IO_SIZE        0x01000000
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_NET_RETRY_COUNT 3
 
 #define CONFIG_PCI_66M
index 5674636..0724752 100644 (file)
 #define CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
 
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT         5
 
 #define CONFIG_TULIP
index 812759d..619a800 100644 (file)
@@ -50,7 +50,6 @@
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
 /* SMC9111 */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE    (0xB0000000)
 
index 88339ac..e36476e 100644 (file)
@@ -99,7 +99,6 @@
 
 #define        CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 
-#define        CONFIG_NET_MULTI        1       /* the only way to get the FEC in */
 #define        FEC_ENET                1       /* eth.c needs it that way... */
 #undef CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII             1
index 92b7d6a..acf5dcb 100644 (file)
@@ -95,7 +95,6 @@
 
 #define        CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 
-#define        CONFIG_NET_MULTI        1       /* the only way to get the FEC in */
 #define        FEC_ENET                1       /* eth.c needs it that way... */
 #undef  CONFIG_SYS_DISCOVER_PHY                /* do not discover phys */
 #define CONFIG_MII             1
index d02dca9..c58899b 100644 (file)
 
 #define        CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 
-#define        CONFIG_NET_MULTI        1       /* the only way to get the FEC in */
 #define        FEC_ENET                1       /* eth.c needs it that way... */
 #undef CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII             1
index 65a366a..47110af 100644 (file)
@@ -56,7 +56,6 @@
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
-#define CONFIG_NET_MULTI
 
 
 /*
index c2e3b2b..9f754c2 100644 (file)
@@ -54,7 +54,6 @@
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
-#define CONFIG_NET_MULTI
 
 
 /*
index bc8e718..1343419 100644 (file)
 
 #define CONFIG_PCI                             /* include pci support          */
 
-#define CONFIG_NET_MULTI                       /* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100                                /* Ethernet Express PRO 100     */
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
index a3cccf4..d892b67 100644 (file)
 #define CONFIG_SYS_PCIE3_IO_SIZE       0x00010000      /* 64k */
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW           /* show pci devices on startup */
 #define CONFIG_E1000                   /* Define e1000 pci Ethernet card */
 #ifdef CONFIG_TSEC_ENET
 
 #define CONFIG_TSECV2
-#define CONFIG_NET_MULTI
 
 #define CONFIG_MII                     /* MII PHY management */
 #define CONFIG_TSEC1           1
index 9386674..e906922 100644 (file)
@@ -394,15 +394,10 @@ extern unsigned long get_clock_freq(void);
 
 #if defined(CONFIG_PCI)
 #define CONFIG_E1000           /* Defind e1000 pci Ethernet card */
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 #define CONFIG_PCI_SCAN_SHOW   /* show pci devices on startup */
 #endif /* CONFIG_PCI */
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-
 /*
  * Environment
  */
index 043515d..ba74a15 100644 (file)
@@ -471,7 +471,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 
 #endif /* CONFIG_PCI */
 
-#define CONFIG_NET_MULTI       1
 
 #if defined(CONFIG_TSEC_ENET)
 #define CONFIG_MII             1       /* MII PHY management */
index f6b788e..3fa38da 100644 (file)
 #endif
 #define CONFIG_SYS_SRIO2_MEM_SIZE      0x20000000      /* 512M */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
 #define CONFIG_TSEC1   1
index c7f0761..91c250f 100644 (file)
@@ -437,7 +437,6 @@ unsigned long get_board_sys_clk(unsigned long dummy);
 #endif
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_E1000
 
index eb641f5..f7ef643 100644 (file)
@@ -68,7 +68,6 @@
 #define        CONFIG_MPSC
 #define CONFIG_MPSC_PORT       0
 
-#define CONFIG_NET_MULTI        /* attempt all available adapters */
 
 /* define this if you want to enable GT MAC filtering */
 #define CONFIG_GT_USE_MAC_HASH_TABLE
index b2b94b4..fb485b0 100644 (file)
 
 #define CONFIG_WATCHDOG
 
-#define CONFIG_NET_MULTI                       /* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
index c126605..16d6450 100644 (file)
 
 #define CONFIG_WATCHDOG
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
index 2dc6057..07415f4 100644 (file)
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                1       /* PHY address                  */
-#define CONFIG_NET_MULTI
 /************************************************************
  * RTC
  ***********************************************************/
index 95c30cc..3fe2b3e 100644 (file)
  * cache bypass so there's no need to monkey with inx/outx macros.
  *----------------------------------------------------------------------*/
 #define CONFIG_SMC91111_BASE   0x82110300      /* Base addr (bypass)   */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111                        /* Using SMC91c111      */
 #undef CONFIG_SMC91111_EXT_PHY                 /* Internal PHY         */
 #define CONFIG_SMC_USE_32_BIT                  /* 32-bit interface     */
index dcf6293..1cce57e 100644 (file)
@@ -53,7 +53,6 @@
 
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_PPC4xx_EMAC
index 8354e70..9b01e4f 100644 (file)
@@ -67,7 +67,6 @@
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
index 501f691..f4f9305 100644 (file)
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  */
-#define        CONFIG_NET_MULTI
 #undef CONFIG_ETHER_NONE               /* define if ether on something else */
 
 #undef CONFIG_ETHER_ON_SCC             /* define if ether on SCC       */
index 1af043d..28666d6 100644 (file)
  * if CONFIG_ETHER_NONE is defined, then either the ethernet routines must be
  * defined elsewhere (as for the console), or CONFIG_CMD_NET must be unset.
  */
-#define CONFIG_NET_MULTI
 #undef CONFIG_ETHER_NONE               /* define if ether on something else */
 
 #undef CONFIG_ETHER_ON_SCC             /* define if ether on SCC       */
index 0f44e64..2dceff7 100644 (file)
@@ -59,7 +59,6 @@
 #define CONFIG_LOADS_ECHO      1       /* echo on for serial download  */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change        */
 
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_PPC4xx_EMAC
index 83cee96..60aabf3 100644 (file)
@@ -46,7 +46,6 @@
 
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change*/
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1
 
 #define CONFIG_PPC4xx_EMAC
index 4eb0735..bee74aa 100644 (file)
 #define CONFIG_HAS_ETH0
 #define CONFIG_SYS_RX_ETH_BUFFER       32      /* Number of ethernet rx buffers & descriptors */
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1                1       /* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR       1
 #define CONFIG_RESET_PHY_R     1
index 7f2f113..d562877 100644 (file)
 /*
  * Networking stuff
  */
-#define CONFIG_NET_MULTI                       /* Multi ethernet cards support */
 
 #define CONFIG_PCNET                           /* there are 2 AMD PCnet 79C973 */
 #define CONFIG_PCNET_79C973
index 195925a..2d45618 100644 (file)
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
 #undef CONFIG_EXT_PHY
-#define CONFIG_NET_MULTI       1
 
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
index b5612d6..7a96530 100644 (file)
 
 #if defined(CONFIG_TSEC_ENET)          /* TSEC Ethernet port */
 
-#  define CONFIG_NET_MULTI     1
 #  define CONFIG_MPC85xx_TSEC1
 #  define CONFIG_MPC85xx_TSEC1_NAME    "TSEC0"
 #  define CONFIG_MII           1       /* MII PHY management           */
index 339e02b..e006b55 100644 (file)
  */
 #define CONFIG_TSEC_ENET               /* TSEC ethernet support */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_GMII                    /* MII PHY management */
 
 #ifdef CONFIG_TSEC1
index 524a3e0..35171b6 100644 (file)
 #define CONFIG_PCI                             /* include pci support          */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI                       /* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
index 87aa4fd..9ba307e 100644 (file)
@@ -97,7 +97,6 @@
 #define CONFIG_PCI                             /* include pci support          */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI                       /* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
index d6ea22d..3a01292 100644 (file)
 /*-----------------------------------------------------------------------
  * defines we need to get FEC running
  */
-#define        CONFIG_NET_MULTI        1       /* the only way to get the FEC in */
 #define CONFIG_FEC_ENET                1       /* Ethernet only via FEC        */
 #define        FEC_ENET                1       /* eth.c needs it that way... */
 #define CONFIG_SYS_DISCOVER_PHY        1
index 3154e13..6ea3faa 100644 (file)
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
index 5cd517d..9370ca8 100644 (file)
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-
 #define CONFIG_TSEC1           1
 #define CONFIG_TSEC1_NAME      "TSEC0"
 #define CONFIG_TSEC2           1
index fe6b728..780abd9 100644 (file)
 
 #endif /* CONFIG_PCI */
 
-#define CONFIG_NET_MULTI       1
 
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_TSEC1   1
index 0082e71..79bea34 100644 (file)
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME                "SCC"
index 6e891e7..7693459 100644 (file)
                         MAMR_AMA_TYPE_1 | MAMR_DSA_1_CYCL | MAMR_G0CLA_A10 |   \
                         MAMR_RLFA_1X    | MAMR_WLFA_1X    | MAMR_TLFA_4X)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SCC1_ENET
 #define CONFIG_FEC_ENET
 #define CONFIG_ETHPRIME                "SCC"
index 717b5cd..16b2dac 100644 (file)
@@ -99,7 +99,6 @@
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
index 740cb75..183045b 100644 (file)
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900                  /* we have a CS8900 on-board */
 #define CONFIG_CS8900_BASE             0x20000300
 #define CONFIG_CS8900_BUS16
index f0c0bd9..5b8f41f 100644 (file)
@@ -54,7 +54,6 @@
 
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_PPC4xx_EMAC
index fec9df0..2ca4ed0 100644 (file)
@@ -52,7 +52,6 @@
 
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
-#define CONFIG_NET_MULTI       1
 #undef  CONFIG_HAS_ETH1
 
 #define CONFIG_PPC4xx_EMAC
index 5d1c188..1d97d3e 100644 (file)
@@ -71,7 +71,6 @@
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1               /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0               /* PHY address                  */
-#define CONFIG_NET_MULTI
 
 #define CONFIG_RTC_M48T35A     1               /* ST Electronics M48 timekeeper */
 
index 422a781..93caacc 100644 (file)
@@ -71,7 +71,6 @@
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1               /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0               /* PHY address                  */
-#define CONFIG_NET_MULTI
 
 #define CONFIG_RTC_M48T35A     1               /* ST Electronics M48 timekeeper */
 #define CONFIG_DTT_LM75     1                /* ON Semi's LM75 */
index 027a904..504ad96 100644 (file)
@@ -60,7 +60,6 @@
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_LXT971_NO_SLEEP  1       /* disable sleep mode in LXT971 */
-#define CONFIG_NET_MULTI
 
 #define CONFIG_PHY_CLK_FREQ    EMAC_STACR_CLK_66MHZ /* 66 MHz OPB clock*/
 
index 0e340e8..5f925b3 100644 (file)
@@ -97,7 +97,6 @@
 #define CONFIG_CMD_SNTP
 
 
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 
 /*
index 5489bd8..5350f61 100644 (file)
@@ -77,7 +77,6 @@
 
 #define CONFIG_MPSC_PORT       0
 
-#define CONFIG_NET_MULTI        /* attempt all available adapters */
 
 /* define this if you want to enable GT MAC filtering */
 #define CONFIG_GT_USE_MAC_HASH_TABLE
index 62913b5..45a7c53 100644 (file)
@@ -71,7 +71,6 @@
 /*
  * Ethernet
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_FTMAC100
 
 #define CONFIG_BOOTDELAY       3
index b5d20bd..1c13904 100644 (file)
@@ -78,7 +78,6 @@
 
 #define CONFIG_SYS_XLB_PIPELINING      1
 
-#undef CONFIG_NET_MULTI
 #undef CONFIG_EEPRO100
 
 /* Partitions */
index 2717aba..00780d0 100644 (file)
 
 /* include IXP4xx NPE support */
 #define CONFIG_IXP4XX_NPE              1
-#define CONFIG_NET_MULTI               1
 /* NPE0 PHY address */
 #define        CONFIG_PHY_ADDR                 0
 /* NPE1 PHY address (HW Release E only) */
index eca814b..cb97434 100644 (file)
 
 /* include IXP4xx NPE support */
 #define CONFIG_IXP4XX_NPE              1
-#define CONFIG_NET_MULTI               1
 /* NPE0 PHY address */
 #define        CONFIG_PHY_ADDR                 0x00
 /* MII PHY management */
index c103312..816d982 100644 (file)
 /* include IXP4xx NPE support */
 #define CONFIG_IXP4XX_NPE              1
 
-#define CONFIG_NET_MULTI               1
 /* NPE0 PHY address */
 #define        CONFIG_PHY_ADDR                 0x10
 /* MII PHY management */
index 190de5a..90badd3 100644 (file)
 /* include IXP4xx NPE support */
 #define CONFIG_IXP4XX_NPE              1
 
-#define CONFIG_NET_MULTI               1
 /* NPE0 PHY address */
 #define        CONFIG_PHY_ADDR                 0x1C
 /* MII PHY management */
index fb958fd..8d0890f 100644 (file)
@@ -80,7 +80,6 @@
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
index 2c2c077..2adf8f9 100644 (file)
 #define CONFIG_MACB
 #define CONFIG_RESET_PHY_R
 
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT         20
 
 /* USB */
index d93e505..0d53e51 100644 (file)
 
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_PHY_ADDR                0x02    /* dummy setting, no EMAC0 used */
 #define CONFIG_PHY1_ADDR       0x03    /* dummy setting, no EMAC1 used */
 #define CONFIG_PHY2_ADDR       0x01    /* PHY address for EMAC2        */
index b5d3e10..76ef56f 100644 (file)
@@ -52,7 +52,6 @@
  */
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII                     /* MII PHY management           */
-#define CONFIG_NET_MULTI
 #define CONFIG_NETCONSOLE              /* include NetConsole support   */
 #if defined(CONFIG_440)
 #define CONFIG_SYS_RX_ETH_BUFFER       32      /* number of eth rx buffers     */
index 45126c7..42a134b 100644 (file)
@@ -53,7 +53,6 @@
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
 /* SMC9118 */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X 1
 #define CONFIG_SMC911X_32_BIT 1
 #define CONFIG_SMC911X_BASE 0xB6080000
index 1f959fc..46595d9 100644 (file)
@@ -86,7 +86,6 @@
 /*
  * SMC91c96 Etherent
  */
-#define CONFIG_NET_MULTI
 #define        CONFIG_LAN91C96
 #define        CONFIG_LAN91C96_BASE    (APOLLON_CS1_BASE+0x300)
 #define        CONFIG_LAN91C96_EXT_PHY
index 3a60de0..0619cf7 100644 (file)
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC             1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR                        0x17
 #define CONFIG_MII                     1       /* MII PHY management */
 #define CONFIG_FEC_AN_TIMEOUT          1
index b847798..7e6c155 100644 (file)
 /*
  * Network Driver Setting
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_DRIVER_AT91EMAC
 #define CONFIG_SYS_RX_ETH_BUFFER       16
 #define CONFIG_RMII
index 88578c6..c439f3e 100644 (file)
 /* Ethernet */
 #define CONFIG_MACB                    1
 #define CONFIG_RMII                    1
-#define CONFIG_NET_MULTI               1
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R             1
 
index 126907f..c8fc9e7 100644 (file)
 #define CONFIG_SYS_NO_FLASH
 
 /* Ethernet */
-#define CONFIG_NET_MULTI
 #define CONFIG_DRIVER_DM9000
 #define CONFIG_DM9000_BASE             0x30000000
 #define DM9000_IO                      CONFIG_DM9000_BASE
index d817423..f73d952 100644 (file)
 /* Ethernet */
 #define CONFIG_MACB                    1
 #define CONFIG_RMII                    1
-#define CONFIG_NET_MULTI               1
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R             1
 
index b08cbf2..05575cd 100644 (file)
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R
 
index 53da0f7..bf1f202 100644 (file)
@@ -72,7 +72,6 @@
 #undef CONFIG_ETHER_NONE               /* define if ether on something else */
 #define CONFIG_ETHER_ON_FCC
 
-#define        CONFIG_NET_MULTI
 #define CONFIG_ETHER_ON_FCC2
 
 /*
index bda6eed..8f9ed23 100644 (file)
@@ -96,7 +96,6 @@
  * "ethaddr" and "eth1addr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP/DHCP options
index f24452b..44ce242 100644 (file)
  * "ethaddr" and "eth1addr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP options
index 26c08e2..a30aa70 100644 (file)
  * "ethaddr" and "eth1addr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP options
index a55e178..72d0948 100644 (file)
@@ -68,7 +68,6 @@
 #define ADI_CMDS_NETWORK       1
 #define CONFIG_BFIN_MAC                1
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HOSTNAME                brettl2
 #define CONFIG_IPADDR          192.168.233.224
 #define CONFIG_GATEWAYIP       192.168.233.1
index 6eec1c9..a97972b 100644 (file)
@@ -84,7 +84,6 @@
        P_MII0_MDIO, \
        0 }
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                bf518f-ezbrd
 #define CONFIG_PHY_ADDR                3
index c28f867..1945c03 100644 (file)
@@ -84,7 +84,6 @@
 #define CONFIG_BFIN_MAC
 #define CONFIG_RMII
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                bf526-ezbrd
 /* Uncomment next line to use fixed MAC address */
index 22a5639..1256e81 100644 (file)
@@ -82,7 +82,6 @@
 #define CONFIG_BFIN_MAC
 #define CONFIG_RMII
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                bf527-ezkit
 /* Uncomment next line to use fixed MAC address */
index 95d3afa..c1a5ecd 100644 (file)
@@ -65,7 +65,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x20310300
 #define SMC91111_EEPROM_INIT() \
index cb37ee7..e3344e9 100644 (file)
@@ -60,7 +60,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x20300300
 #define SMC91111_EEPROM_INIT() \
index 11929c7..c6ae4f1 100644 (file)
@@ -75,7 +75,6 @@
 #ifndef __ADSPBF534__
 #define CONFIG_BFIN_MAC
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #ifdef CONFIG_BFIN_MAC
 #define CONFIG_IPADDR          192.168.0.15
index 0913ce4..62bd3bf 100644 (file)
@@ -63,7 +63,6 @@
 #define ADI_CMDS_NETWORK       1
 #define CONFIG_BFIN_MAC
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                bf537-pnav
 /* Uncomment next line to use fixed MAC address */
index e8024d7..da3681d 100644 (file)
@@ -75,7 +75,6 @@
 #ifndef __ADSPBF534__
 #define CONFIG_BFIN_MAC
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #ifdef CONFIG_BFIN_MAC
 #define CONFIG_IPADDR          192.168.0.15
index 1a7273b..05029d4 100644 (file)
@@ -63,7 +63,6 @@
 #define ADI_CMDS_NETWORK       1
 #define CONFIG_BFIN_MAC
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                bf537-stamp
 /* Uncomment next line to use fixed MAC address */
index 717a35a..77822e7 100644 (file)
@@ -60,7 +60,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x20310300
 #define CONFIG_HOSTNAME                bf538f-ezkit
index 4862baa..3eadcef 100644 (file)
@@ -69,7 +69,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X 1
 #define CONFIG_SMC911X_BASE    0x24000000
 #define CONFIG_SMC911X_16_BIT
index 1490b2f..ee585c0 100644 (file)
@@ -76,7 +76,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK                       1
-#define CONFIG_NET_MULTI
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_MII
 #define CONFIG_CMD_DATE
index 6cfc19b..1a9d27e 100644 (file)
@@ -60,7 +60,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x2C010300
 #define CONFIG_SMC_USE_32_BIT  1
index 85f08ea..63791be 100644 (file)
@@ -30,7 +30,6 @@
 /*
  * Board settings
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x20300300
 
index 9950e44..b425b7b 100644 (file)
  * Then use the dedicated card IP + 1 for the board
  * http://docs.blackfin.uclinux.org/doku.php?id=setting_up_the_network
  */
-#define CONFIG_NET_MULTI
-
 #define CONFIG_DRIVER_AX88180  1
 #define AX88180_BASE           0x2c000000
 #define CONFIG_CMD_MII         /* enable probing PHY */
 
-#ifdef CONFIG_NET_MULTI                /* also used as the network enabler */
-# define CONFIG_HOSTNAME       blackvme        /* Bfin board  */
-# define CONFIG_IPADDR         169.254.144.145 /* Bfin board  */
-# define CONFIG_GATEWAYIP      169.254.144.144 /* dedic card  */
-# define CONFIG_SERVERIP       169.254.144.144 /* tftp server */
-# define CONFIG_NETMASK                255.255.255.0
-# define CONFIG_ROOTPATH       /export/uClinux-dist/romfs      /*NFS*/
-# define CFG_AUTOLOAD          "no"
-# define CONFIG_CMD_DHCP
-# define CONFIG_CMD_PING
-# define CONFIG_ENV_OVERWRITE  1       /* enable changing MAC at runtime */
+#define CONFIG_HOSTNAME        blackvme        /* Bfin board  */
+#define CONFIG_IPADDR          169.254.144.145 /* Bfin board  */
+#define CONFIG_GATEWAYIP       169.254.144.144 /* dedic card  */
+#define CONFIG_SERVERIP        169.254.144.144 /* tftp server */
+#define CONFIG_NETMASK         255.255.255.0
+#define CONFIG_ROOTPATH        /export/uClinux-dist/romfs      /*NFS*/
+#define CFG_AUTOLOAD           "no"
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_ENV_OVERWRITE   1       /* enable changing MAC at runtime */
 /* Comment out hardcoded MAC to enable MAC storage in EEPROM */
 /* # define CONFIG_ETHADDR     ff:ee:dd:cc:bb:aa */
-#endif
 
 /*
  * SDRAM settings & memory map
index 8c57eab..2675c56 100644 (file)
@@ -50,7 +50,6 @@
 #define VEXPRESS_FLASHPROG_FLVPPEN     (1 << 0)
 
 /* SMSC9115 Ethernet from SMSC9118 family */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X                 1
 #define CONFIG_SMC911X_32_BIT          1
 #define CONFIG_SMC911X_BASE            0x4E000000
@@ -78,7 +77,6 @@
 #define CONFIG_CMD_NET
 #define CONFIG_CMD_PING
 #define CONFIG_CMD_SAVEENV
-#define CONFIG_NET_MULTI
 #define CONFIG_CMD_RUN
 
 #define CONFIG_CMD_FAT
index 7e179be..be325e8 100644 (file)
@@ -53,7 +53,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE 0x04000300
 #define CONFIG_SMC_USE_32_BIT
index e0c6d53..4f2b904 100644 (file)
@@ -82,7 +82,6 @@
 #define CONFIG_BFIN_MAC
 #define CONFIG_RMII
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                cm-bf527
 /* Uncomment next line to use fixed MAC address */
index 7515296..e2b954c 100644 (file)
@@ -63,7 +63,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111        1
 #define CONFIG_SMC91111_BASE   0x20200300
 #define CONFIG_HOSTNAME                cm-bf533
index 9649e18..77f47d9 100644 (file)
@@ -69,7 +69,6 @@
 #define CONFIG_SMC911X_BASE    0x20308000
 #define CONFIG_SMC911X_16_BIT
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                cm-bf537e
 /* Uncomment next line to use fixed MAC address */
index 84846ef..55e61d6 100644 (file)
@@ -67,7 +67,6 @@
 #define CONFIG_SMC911X_BASE    0x20308000
 #define CONFIG_SMC911X_16_BIT
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                cm-bf537u
 /* Uncomment next line to use fixed MAC address */
index fa62a8e..a6d2fa8 100644 (file)
@@ -72,7 +72,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X 1
 #define CONFIG_SMC911X_BASE    0x24000000
 #define CONFIG_SMC911X_16_BIT
index c60401c..93e3c86 100644 (file)
@@ -63,7 +63,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X         1
 #define CONFIG_SMC911X_BASE    0x24008000 /* AMS1 */
 #define CONFIG_SMC911X_16_BIT
index 5777062..81e4de4 100644 (file)
@@ -38,7 +38,6 @@
 #define CONFIG_INITRD_TAG       1
 
 #define CONFIG_DRIVER_KS8695ETH                /* use KS8695 ethernet driver   */
-#define CONFIG_NET_MULTI
 
 /*
  * Size of malloc() pool
index 66e689a..785ab0a 100644 (file)
@@ -38,7 +38,6 @@
 #define CONFIG_INITRD_TAG       1
 
 #define CONFIG_DRIVER_KS8695ETH                /* use KS8695 ethernet driver   */
-#define CONFIG_NET_MULTI
 
 /*
  * Size of malloc() pool
index 496a904..026d222 100644 (file)
 #define CONFIG_ENV_ADDR                        SMNAND_ENV_OFFSET
 
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_32_BIT
 #define CM_T3X_SMC911X_BASE    0x2C000000
index 5348ad1..6d97a0c 100644 (file)
 #undef CONFIG_CMD_MII
 
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index 23bfbeb..011731b 100644 (file)
@@ -84,7 +84,6 @@
 #define        CONFIG_CMD_PING
 #define        CONFIG_CMD_DHCP
 
-#define        CONFIG_NET_MULTI                1
 #define        CONFIG_DRIVER_DM9000            1
 #define CONFIG_DM9000_BASE             0x08000000
 #define DM9000_IO                      (CONFIG_DM9000_BASE)
index 4bbca88..0075210 100644 (file)
 #endif
 
 #ifdef CONFIG_PCI
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 #define CONFIG_E1000
 
index c1742c1..a9cfe26 100644 (file)
@@ -84,7 +84,6 @@
 
 #define CONFIG_MII
 #if 0                          /* test-only !!! */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8       /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
index ba9f797..0c86d62 100644 (file)
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT                 20
 #define CONFIG_MACB_SEARCH_PHY
 
index 75b881c..1b43c54 100644 (file)
 #define CONFIG_SYS_MEMTEST_END                 \
        (CONFIG_SYS_MEMTEST_START + CONFIG_SYS_SDRAM_SIZE - 512 * 1024)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_DRIVER_AT91EMAC
 #define CONFIG_SYS_RX_ETH_BUFFER       16
 #define CONFIG_RMII
index 21a8e64..25be616 100644 (file)
@@ -48,7 +48,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE 0x10000300
 #define CONFIG_SMC91111_EXT_PHY
index 934dfcd..804469b 100644 (file)
 /*
  * Network chip
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900
 #define CONFIG_CS8900_BUS32
 #define CONFIG_CS8900_BASE     0x08000000
index 0ea34b8..fb5f868 100644 (file)
 #define CONFIG_PHY_CMD_DELAY   40      /* PHY COMMAND delay            */
                                        /* 32usec min. for LXT971A      */
 #define CONFIG_PHY_RESET_DELAY 300     /* PHY RESET recovery delay     */
-#define CONFIG_NET_MULTI
 
 /*
  * RTC configuration
index 2373167..5d18ac7 100644 (file)
 #define CONFIG_PHY_CMD_DELAY   40      /* PHY COMMAND delay            */
                                        /* 32usec min. for LXT971A      */
 #define CONFIG_PHY_RESET_DELAY 300     /* PHY RESET recovery delay     */
-#define CONFIG_NET_MULTI
 
 /*
  * RTC configuration
index 66fdea2..c522af9 100644 (file)
@@ -94,7 +94,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 #endif
 
 /*
index f6068a2..cad5620 100644 (file)
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 #endif
 
 #ifdef CONFIG_USE_NOR
index 56d0ac9..ddf673c 100644 (file)
@@ -55,7 +55,6 @@
 #define CONFIG_DM9000_BASE             0x04014000
 #define DM9000_IO                      CONFIG_DM9000_BASE
 #define DM9000_DATA                    (CONFIG_DM9000_BASE + 2)
-#define CONFIG_NET_MULTI
 
 /* I2C */
 #define CONFIG_HARD_I2C
index b44b2ea..dfa0a00 100644 (file)
@@ -54,7 +54,6 @@
 #define CONFIG_DM9000_BASE             0x04000000
 #define DM9000_IO                      CONFIG_DM9000_BASE
 #define DM9000_DATA                    (CONFIG_DM9000_BASE + 16)
-#define CONFIG_NET_MULTI
 
 /* I2C */
 #define CONFIG_HARD_I2C
index 28b9db9..323c0b4 100644 (file)
@@ -67,7 +67,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 
 /* I2C */
 #define CONFIG_HARD_I2C
index a0a30f5..d97c0f3 100644 (file)
@@ -91,7 +91,6 @@ extern unsigned int davinci_arm_clk_get(void);
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 #define CONFIG_CMD_NET
 
 /* Flash & Environment */
index 086a2d7..88c6bee 100644 (file)
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 /*=====================*/
 /* Flash & Environment */
 /*=====================*/
index 5cc8bc0..b6f61ee 100644 (file)
@@ -76,7 +76,6 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 /*=====================*/
 /* Flash & Environment */
 /*=====================*/
index 307b9f2..ce27212 100644 (file)
@@ -73,7 +73,6 @@
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 /* Flash & Environment */
 #undef CONFIG_ENV_IS_IN_FLASH
 #define CONFIG_SYS_NO_FLASH
index 2336129..163f1a2 100644 (file)
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 /*=====================*/
 /* Flash & Environment */
 /*=====================*/
index d8c9362..1d5cf2c 100644 (file)
 
 #define CONFIG_NR_DRAM_BANKS   2
 
-#define CONFIG_NET_MULTI
 
 #ifdef CONFIG_DBAU1550
 #define MEM_SIZE 192
index 7ad36a1..60c70eb 100644 (file)
 #define CONFIG_PCI                             /* include pci support          */
 #define CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI               /* Multi ethernet cards support */
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8       /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
index fbcbdb3..ba0d23e 100644 (file)
@@ -73,7 +73,6 @@
 #define CONFIG_OMAP3_MICRON_DDR                1
 
 /* DM9000 */
-#define CONFIG_NET_MULTI               1
 #define CONFIG_NET_RETRY_COUNT         20
 #define        CONFIG_DRIVER_DM9000            1
 #define        CONFIG_DM9000_BASE              0x2c000000
index 0e05df3..3a05c82 100644 (file)
  * SMSC9220 Ethernet
  */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_32_BIT
 #define CONFIG_SMC911X_BASE     0x2C000000
index 6b328a5..4ab48c7 100644 (file)
@@ -49,7 +49,6 @@
 #ifndef __ADSPBF534__
 #define CONFIG_ROOTPATH        /romfs
 
-#define CONFIG_NET_MULTI        1
 #define CONFIG_BFIN_MAC         1
 #define CONFIG_PHY_ADDR         0
 #define CONFIG_RMII             1
index bccd416..86fecd1 100644 (file)
 /* include IXP4xx NPE support */
 #define CONFIG_IXP4XX_NPE              1
 
-#define CONFIG_NET_MULTI               1
 /* NPE0 PHY: MII dLAN200 AVmodule, 100BaseT-FDX fixed */
 #define        CONFIG_PHY_ADDR                 0x18
 /* NPE1 PHY: MII IP175 switch, port 5 is host port */
index 548d52c..70c74f6 100644 (file)
 /*-----------------------------------------------------------------------
  * Network device (TRL8100B) support
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_RTL8139
 
 /*-----------------------------------------------------------------------
index 61f34dd..afb1de6 100644 (file)
 #define CONFIG_PCI             1       /* include pci support          */
 #undef CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI       1       /* Multi ethernet cards support */
 
 #define CONFIG_EEPRO100                1
 
index 48ce945..a2e3178 100644 (file)
@@ -93,7 +93,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT 10
-#define CONFIG_NET_MULTI
 #endif
 
 #ifdef CONFIG_USE_SPIFLASH
index c4b1e65..4324172 100644 (file)
 /*
  * network
  */
-#define CONFIG_NET_MULTI               1
 
 #define CONFIG_NET_RETRY_COUNT         10
 #define CONFIG_RESET_PHY_R             1
index 371e781..f8affa8 100644 (file)
 #define CONFIG_PHY_BASE_ADR    0x8
 #define CONFIG_RESET_PHY_R     /* use reset_phy() to init mv8831116 PHY */
 #define CONFIG_NETCONSOLE      /* include NetConsole support   */
-#define CONFIG_NET_MULTI       /* specify more that one ports available */
 #define        CONFIG_MII              /* expose smi ove miiphy interface */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        /* detect link using phy */
 #define CONFIG_ENV_OVERWRITE   /* ethaddr can be reprogrammed */
index bb87d36..2b40f59 100644 (file)
@@ -64,7 +64,6 @@
 #define CONFIG_ETHER_ON_FCC            /* Ethernet is on FCC     */
 #undef CONFIG_ETHER_NONE               /* No external Ethernet   */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SYS_CPMFCR_RAMTYPE      0
 #define CONFIG_SYS_FCC_PSMR            (FCC_PSMR_FDE | FCC_PSMR_LPB)
 
index 692f0ec..04c0708 100644 (file)
@@ -67,7 +67,6 @@
 #define CONFIG_ETHER_ON_FCC            /* Ethernet is on FCC     */
 #undef CONFIG_ETHER_NONE               /* No external Ethernet   */
 
-#define CONFIG_NET_MULTI
 
 #define CONFIG_ETHER_ON_FCC2
 #define CONFIG_ETHER_ON_FCC3
index 74daeb0..38058c7 100644 (file)
 #define CONFIG_SYS_HZ       1000
 
 /* Ether */
-#define CONFIG_NET_MULTI 1
 #define CONFIG_SH_ETHER 1
 #define CONFIG_SH_ETHER_USE_PORT (1)
 #define CONFIG_SH_ETHER_PHY_ADDR (0x00)
index 4c30b39..757636d 100644 (file)
  * "ethaddr" and "eth1addr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP options
index 5f72163..a9f3b3b 100644 (file)
@@ -69,7 +69,6 @@
 /* Network configuration */
 #ifdef CONFIG_CMD_NET
 #define CONFIG_CMD_PING
-#define CONFIG_NET_MULTI
 #define CONFIG_ARMADA100_FEC
 
 /* DHCP Support */
index dc62ea3..a127a2b 100644 (file)
 /*
  * Ethernet configuration uses on board SMC91C111
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111          1
 #define CONFIG_SMC91111_BASE           0x20000300      /* chip select 3         */
 #define CONFIG_SMC_USE_32_BIT          1       /* 32 bit bus  */
index 5efe676..643efc4 100644 (file)
 #ifndef USE_GRETH
 
 /* USE SMC91C111 MAC */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111          1
 #define CONFIG_SMC91111_BASE           0x20000300      /* chip select 3         */
 #define CONFIG_SMC_USE_32_BIT          1       /* 32 bit bus  */
 #else
 
 /* USE GRETH Ethernet Driver */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_GRETH   1
 
 /* Default GRETH Ethernet HARDWARE address */
index 505db10..e13299e 100644 (file)
  * Ethernet configuration
  */
 #define CONFIG_GRETH   1
-#define CONFIG_NET_MULTI       1
 
 /* Default GRETH Ethernet HARDWARE address */
 #define GRETH_HWADDR_0 0x00
index 9779449..e27216a 100644 (file)
  * "ethaddr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP options
index bbd2f91..f868d96 100644 (file)
  * Ethernet configuration
  */
 #define CONFIG_GRETH   1
-#define CONFIG_NET_MULTI       1
 
 /* Default HARDWARE address */
 #define GRETH_HWADDR_0 0x00
index 294d6c4..ed1008f 100644 (file)
  * Ethernet configuration
  */
 /*#define CONFIG_GRETH 1*/
-/*#define CONFIG_NET_MULTI     1*/
 
 /* Default HARDWARE address */
 #define GRETH_HWADDR_0 0x00
index b5f454c..76e911a 100644 (file)
 
 #define CONFIG_NR_DRAM_BANKS   2
 
-#define CONFIG_NET_MULTI
 
 #define CONFIG_MEMSIZE_IN_BYTES
 
index bfdfc0a..94e680c 100644 (file)
@@ -97,7 +97,6 @@
  * "ethaddr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP/DHCP options
index 23a88d0..5f88d96 100644 (file)
@@ -93,7 +93,6 @@
 #define CONFIG_BOOTP_DNS2
 #define CONFIG_BOOTP_SEND_HOSTNAME
 #define CONFIG_NET_RETRY_COUNT         10
-#define CONFIG_NET_MULTI
 
 /*
  * Nand Flash
index 055f8a0..294af73 100644 (file)
@@ -61,7 +61,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI
 #define CONFIG_DRIVER_AX88180  1
 #define AX88180_BASE           0x2c000000
 #define CONFIG_HOSTNAME                ibf-dsp561
index fc046d6..4bc36b9 100644 (file)
  */
 #define CONFIG_MCFFEC
 #ifdef CONFIG_MCFFEC
-#      define CONFIG_NET_MULTI         1
 #      define CONFIG_MII               1
 #      define CONFIG_MII_INIT          1
 #      define CONFIG_SYS_DISCOVER_PHY
index b6534e4..279a9d2 100644 (file)
  * SMSC911x Ethernet
  */
 #if defined(CONFIG_CMD_NET)
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_32_BIT
 #define CONFIG_SMC911X_BASE    0x2C000000
index 8d93277..6953a80 100644 (file)
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_PHYADDR         0x1f
 #define CONFIG_MII
-#define CONFIG_NET_MULTI
 
 /*
  * MTD
index 5e976bc..31f0513 100644 (file)
        "prg_uboot=tftpboot 0x80000000 u-boot-imx31_litekit.bin; protect off all; erase 0xa00d0000 0xa01effff; cp.b 0x80000000 0xa00d0000 $(filesize)\0"
 
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X         1
 #define CONFIG_SMC911X_BASE    (CS4_BASE + 0x00020000)
 #define CONFIG_SMC911X_32_BIT  1
index a0c0f1b..61f0534 100644 (file)
        "prg_jffs2=tftpboot 0x80000000 $(jffs2); erase 0xa01c0000 0xa1ffffff; cp.b 0x80000000 0xa01c0000 $(filesize)\0"
 
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X         1
 #define CONFIG_SMC911X_BASE    0xa8000000
 #define CONFIG_SMC911X_32_BIT  1
index 0e5ad2b..70c9bb4 100644 (file)
 #define CONFIG_NR_DRAM_BANKS   1
 
 #define CONFIG_INCA_IP_SWITCH
-#define CONFIG_NET_MULTI
 #define CONFIG_INCA_IP_SWITCH_AMDIX
 
 /*
index 2e4b346..a0a3da1 100644 (file)
 /*
  * SMSC91C111 Network Card
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111                1
 #define CONFIG_SMC91111_BASE           0x14000000 /* chip select 5         */
 #undef  CONFIG_SMC_USE_32_BIT                     /* 16 bit bus access     */
index 3b983af..61b8761 100644 (file)
@@ -68,8 +68,6 @@
 #define CONFIG_SYS_SERIAL0             0x16000000
 #define CONFIG_SYS_SERIAL1             0x17000000
 
-/*#define CONFIG_NET_MULTI */
-
 
 /*
  * BOOTP options
index e9b68c6..7ae34b7 100644 (file)
@@ -54,7 +54,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC_USE_32_BIT
 #define CONFIG_SMC91111_BASE    0xC8000000
index c024d78..d36ae43 100644 (file)
@@ -69,7 +69,6 @@
  * Network Settings
  */
 #define ADI_CMDS_NETWORK       1
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HOSTNAME                IP04
 
 #define CONFIG_DRIVER_DM9000   1
index ba08d92..cfa4d8c 100644 (file)
@@ -98,7 +98,6 @@
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
index 0375732..20e1087 100644 (file)
@@ -80,7 +80,6 @@
 /*
  * Ethernet
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_BASE    0x02000000
 #define CONFIG_SMC911X_16_BIT
index 8d27c0b..f5adccb 100644 (file)
@@ -79,7 +79,6 @@
 
 #define CONFIG_SYS_XLB_PIPELINING      1
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
 
index 0360cd3..02a82a6 100644 (file)
@@ -52,7 +52,6 @@
 #define        CONFIG_ETHER_ON_SCC             /* Ethernet is on SCC */
 #undef CONFIG_ETHER_ON_FCC             /* Ethernet is not on FCC     */
 #undef CONFIG_ETHER_NONE               /* No external Ethernet   */
-#define CONFIG_NET_MULTI
 
 #define CONFIG_ETHER_INDEX     4
 #define CONFIG_HAS_ETH0
index 4a357d6..2014e37 100644 (file)
 #define CONFIG_OF_BOARD_SETUP
 #define CONFIG_OF_STDOUT_VIA_ALIAS
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
 /*
  * QE UEC ethernet configuration
  */
index 8476eb7..c117943 100644 (file)
  * Ethernet Driver configuration
  */
 #define CONFIG_NETCONSOLE      /* include NetConsole support   */
-#define CONFIG_NET_MULTI       /* specify more that one ports available */
 #define CONFIG_MII             /* expose smi ove miiphy interface */
 #define CONFIG_MVGBE           /* Enable Marvell Gbe Controller Driver */
 #define CONFIG_SYS_FAULT_ECHO_LINK_DOWN        /* detect link using phy */
index 66cb533..46335b4 100644 (file)
 #define CONFIG_HAS_ETH0
 #define CONFIG_SYS_RX_ETH_BUFFER       32      /* Number of ethernet rx        */
                                        /*   buffers & descriptors      */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1                1       /* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR       3
 
index 95fc243..203a4b2 100644 (file)
 #define CONFIG_PCI
 #define CONFIG_PCI_PNP
 
-#define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
 #define CONFIG_EEPRO100_SROM_WRITE
 
index b00647b..cdf6827 100644 (file)
 /*-----------------------------------------------------------------------
  * Ethernet stuff
  */
-#define CONFIG_NET_MULTI
 
 #if defined(CONFIG_LAN) || defined(CONFIG_HLAN)
 #define CONFIG_TULIP
index b6ee919..bbdae3c 100644 (file)
@@ -57,7 +57,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x0C000000
 
index a1ead70..a6f2864 100644 (file)
 #define CONFIG_HAS_ETH0
 #define CONFIG_SYS_RX_ETH_BUFFER       32      /* Number of ethernet rx buffers & descriptors */
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1                1       /* add support for "eth1addr"   */
 #define CONFIG_PHY1_ADDR       1
 
index b9cf1dc..19ef254 100644 (file)
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC     1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR                0x1
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_FEC_AN_TIMEOUT  1
index 9961f12..22e95b3 100644 (file)
@@ -66,7 +66,6 @@
 
 #define CONFIG_MII
 #if 0 /* test-only !!! */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
index e100cb4..a2b55d5 100644 (file)
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_FIT
 #define CONFIG_NET_RETRY_COUNT                 20
 #undef CONFIG_RESET_PHY_R
index a811b76..09ff7c4 100644 (file)
 
 #ifndef CONFIG_SYS_ENET
 # undef CONFIG_CMD_NET
-# undef CONFIG_NET_MULTI
 # undef CONFIG_CMD_NFS
 #else
 # define CONFIG_CMD_PING
 # define CONFIG_CMD_DHCP
-# define CONFIG_NET_MULTI
 #endif
 
 #if defined(CONFIG_SYSTEMACE)
index 6c52769..d8d8256 100644 (file)
  * "ethaddr" and "eth1addr". This is normally done during production.
  */
 #define CONFIG_OVERWRITE_ETHADDR_ONCE
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP/DHCP options
index e7ef298..4288894 100644 (file)
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC     1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR                0x1
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_FEC_AN_TIMEOUT  1
index 9274464..700dcda 100644 (file)
 #define CONFIG_TSI108_ETH
 #define CONFIG_TSI108_ETH_NUM_PORTS    2
 
-#define CONFIG_NET_MULTI
 
 #define CONFIG_BOOTFILE                zImage.initrd.elf
 #define CONFIG_LOADADDR                0x400000
index d7a3a96..9e61fc1 100644 (file)
 /*
  * TSEC
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_TSEC_ENET       /* TSEC ethernet support */
 #define CONFIG_SYS_TSEC1_OFFSET        0x24000
 #define CONFIG_SYS_TSEC1       (CONFIG_SYS_IMMR+CONFIG_SYS_TSEC1_OFFSET)
index f0ed4d1..a6dc146 100644 (file)
  */
 #ifdef CONFIG_TSEC_ENET
 
-# ifndef CONFIG_NET_MULTI
-#  define CONFIG_NET_MULTI
-# endif
-
 # define CONFIG_MII                /* MII PHY management */
 # define CONFIG_MII_DEFAULT_TSEC 1 /* Allow unregistered phys */
 
index c8d04f7..7cf641f 100644 (file)
@@ -48,7 +48,6 @@
 #undef  CONFIG_SHOW_BOOT_PROGRESS
 
 /* SMC9111 */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE    (0xB8000000)
 
index 7b68ec5..0643312 100644 (file)
@@ -63,7 +63,6 @@
 /*
  *  CS8900 Ethernet drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900          /* we have a CS8900 on-board */
 #define CONFIG_CS8900_BASE     0x15000300
 #define CONFIG_CS8900_BUS16    /* the Linux driver does accesses as shorts */
index 0afae24..8414376 100644 (file)
@@ -89,7 +89,6 @@
 #define CONFIG_FEC_MXC_PHYADDR         0x1f
 #define CONFIG_MII
 #define CONFIG_CMD_NET
-#define CONFIG_NET_MULTI
 #define CONFIG_ENV_OVERWRITE
 
 #define CONFIG_BOOTDELAY       3
index 0bea858..457a24a 100644 (file)
                "cp.b ${loadaddr} ${uboot_addr} ${filesize}; "          \
                "setenv filesize; saveenv\0"
 
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900
 #define CONFIG_CS8900_BASE     0xb4020300
 #define CONFIG_CS8900_BUS16            1       /* follow the Linux driver */
index cd156d8..8c5730a 100644 (file)
                "nand erase 0x0 0x40000; "                              \
                "nand write 0x81000000 0x0 0x40000\0"
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_BASE    0xB6000000
 #define CONFIG_SMC911X_32_BIT
index 4e9022d..670e76d 100644 (file)
 #define CONFIG_SMC911X_BASE CS5_BASE_ADDR
 
 #define CONFIG_HAS_ETH1
-#define CONFIG_NET_MULTI
 #define CONFIG_ETHPRIME
 
 /*
index d62a4f2..0c10870 100644 (file)
@@ -94,7 +94,6 @@
  * Eth Configs
  */
 #define CONFIG_HAS_ETH1
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 
index 26fc219..3e99031 100644 (file)
@@ -68,7 +68,6 @@
 
 /* Eth Configs */
 #define CONFIG_HAS_ETH1
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 #define CONFIG_MII_GASKET
 #define CONFIG_DISCOVER_PHY
index b127b06..2033492 100644 (file)
@@ -76,7 +76,6 @@
 
 /* Eth Configs */
 #define CONFIG_HAS_ETH1
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 
index 4091703..c3e4e13 100644 (file)
@@ -61,7 +61,6 @@
 
 /* Eth Configs */
 #define CONFIG_HAS_ETH1
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 
index 261f0bc..c117a33 100644 (file)
@@ -68,7 +68,6 @@
 
 /* Eth Configs */
 #define CONFIG_HAS_ETH1
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 
index 758f19d..13d1e66 100644 (file)
 #define __io(a)                        ((void __iomem *)(PCI_IO_VADDR + (a)))
 #define __mem_isa(a)           ((a) + PCI_MEMORY_VADDR)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111        /* Using SMC91c111*/
 #define CONFIG_SMC91111_BASE   0x34000300
 #undef  CONFIG_SMC91111_EXT_PHY        /* Internal PHY */
index d57d53c..1395939 100644 (file)
@@ -92,7 +92,6 @@
 #undef CONFIG_CMD_XIMG
 
 #ifdef CONFIG_CMD_NET
-# define CONFIG_NET_MULTI
 # define CONFIG_CMD_DHCP
 # define CONFIG_CMD_PING
 #endif
index 9f5a0b8..22eb004 100644 (file)
@@ -65,7 +65,6 @@
 
 #define CONFIG_SYS_XLB_PIPELINING      1
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
index 62c1721..43de18b 100644 (file)
@@ -59,7 +59,6 @@
 #define CONFIG_SMC9196_BASE 0x08000300
 #define CONFIG_SMC9196_EXT_PHY
 */
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x08000300
 #define CONFIG_LAN91C96_EXT_PHY
index 9fa3317..d57e1a7 100644 (file)
@@ -57,7 +57,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
index e3f3487..7901b6c 100644 (file)
@@ -58,7 +58,6 @@
  */
 /*
 */
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
index 01f402b..46d1643 100644 (file)
@@ -82,7 +82,6 @@
 /*
  * SMC91c96 Etherent
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE     (H4_CS1_BASE+0x300)
 #define CONFIG_LAN91C96_EXT_PHY
index 1369c89..a026478 100644 (file)
 #define CONFIG_USB_ETHER_SMSC95XX
 #define CONFIG_USB_ETHER_ASIX
 
-#define CONFIG_NET_MULTI
 
 /* commands to include */
 #include <config_cmd_default.h>
index 7af30c2..4c95a78 100644 (file)
  */
 #if defined(CONFIG_CMD_NET)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_32_BIT
 #define CONFIG_SMC911X_BASE    0x2C000000
index 3f37263..2f3743c 100644 (file)
  *----------------------------------------------------------------------------
  */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X         1
 #define CONFIG_SMC911X_32_BIT
 #define CONFIG_SMC911X_BASE     0x2C000000
index 6a826ba..35472bb 100644 (file)
  */
 #if defined(CONFIG_CMD_NET)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE   DEBUG_BASE
 #define CONFIG_LAN91C96_EXT_PHY
index db25b86..a8dfef3 100644 (file)
@@ -60,7 +60,6 @@
  */
 /*
 */
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE 0x04800300
 #define CONFIG_LAN91C96_EXT_PHY
index bf8e000..26e7e1f 100644 (file)
@@ -64,7 +64,6 @@
  * Hardware drivers
  */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_LAN91C96
 #define CONFIG_LAN91C96_BASE      0x04000300
 #define CONFIG_LAN91C96_EXT_PHY
index 9ecb2b0..e2c2eda 100644 (file)
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_FIT
 #define CONFIG_NET_RETRY_COUNT                 20
 #undef CONFIG_RESET_PHY_R
index 71eb784..94a6992 100644 (file)
  *----------------------------------------------------------------------*/
 /* Change the default ethernet port, use this define (options: 0, 1, 2) */
 #define CONFIG_SYS_ETH_PORT            ETH_0
-#define CONFIG_NET_MULTI
 #define MV_ETH_DEVS            2
 #define CONFIG_PHY_RESET        1      /* reset phy upon startup         */
 #define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
index 719a12a..d7b1ca2 100644 (file)
 #define CONFIG_PHY_ADDR                0x1c    /* PHY address                  */
 #define CONFIG_HAS_ETH1
 #define CONFIG_PHY1_ADDR       0x1d    /* EMAC1 PHY address            */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_SYS_RX_ETH_BUFFER       32      /* Number of ethernet rx buffers & descriptors */
 
 #define CONFIG_NETCONSOLE              /* include NetConsole support   */
index d5cf89a..eea8ed3 100644 (file)
 
 #define CONFIG_NR_DRAM_BANKS   2
 
-#define CONFIG_NET_MULTI
 
 #define CONFIG_MEMSIZE_IN_BYTES
 
index deb5b33..26627bb 100644 (file)
 
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_MII             1       /* MII PHY management           */
-#define CONFIG_NET_MULTI        1      /* required for netconsole      */
 #define CONFIG_HAS_ETH1                1       /* add support for "eth1addr"   */
 #define CONFIG_PHY_ADDR                1       /* PHY address, See schematics  */
 #define CONFIG_PHY1_ADDR        2
index 831af6a..f0154e0 100644 (file)
  * Ethernet configuration
  */
 #define CONFIG_MPC512x_FEC     1
-#define CONFIG_NET_MULTI
 #define CONFIG_PHY_ADDR                0x1F
 #define CONFIG_MII             1       /* MII PHY management   */
 #define CONFIG_FEC_AN_TIMEOUT  1
index 7fe9e5b..56bb464 100644 (file)
@@ -40,7 +40,6 @@
  * Ethernet
  */
 #define CONFIG_IXP4XX_NPE      1       /* include IXP4xx NPE support   */
-#define CONFIG_NET_MULTI       1
 #define        CONFIG_PHY_ADDR         16      /* NPE0 PHY address             */
 #define CONFIG_HAS_ETH1
 #define CONFIG_PHY1_ADDR       18      /* NPE1 PHY address             */
index 5830345..4a98545 100644 (file)
@@ -82,7 +82,6 @@
 
 #define CONFIG_MII             1
 #if 0                          /* test-only !!! */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8       /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
index ad82213..7dd6246 100644 (file)
@@ -56,7 +56,6 @@
  */
 
 /* None - PLEB 2 doesn't have any of this.
-       #define CONFIG_NET_MULTI
        #define CONFIG_LAN91C96
        #define CONFIG_LAN91C96_BASE 0x0C000000
  */
index 3a8b095..89e17b8 100644 (file)
 #define CONFIG_DM9000_USE_16BIT                        1
 #define CONFIG_NET_RETRY_COUNT                 20
 #define CONFIG_RESET_PHY_R                     1
-#define CONFIG_NET_MULTI
 
 /* USB */
 #define CONFIG_USB_ATMEL
index 1e282d2..57a0416 100644 (file)
 /* Ethernet */
 #define CONFIG_MACB                    1
 #define CONFIG_RMII                    1
-#define CONFIG_NET_MULTI               1
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R             1
 
index 672f663..acc1204 100644 (file)
 /* Ethernet */
 #define CONFIG_MACB                    1
 #define CONFIG_RMII                    1
-#define CONFIG_NET_MULTI               1
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R             1
 
index 652b85e..d3c8990 100644 (file)
 /*
  * Network config
  *
- * CONFIG_NET_MULTI            - Support for multiple network interfaces
  * CONFIG_EEPRO100             - Intel 8255x Ethernet Controller
  * CONFIG_EEPRO100_SROM_WRITE  - Enable writing to network card ROM
  */
 
-#define        CONFIG_NET_MULTI
 #define        CONFIG_EEPRO100
 #define        CONFIG_EEPRO100_SROM_WRITE
 
index e591d87..cd95081 100644 (file)
@@ -86,7 +86,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE   (PXA_CS5_PHYS + IDP_CS5_ETH_OFFSET + 0x300)
 #define CONFIG_SMC_USE_32_BIT  1
index fb697d5..f5a137e 100644 (file)
 
 #define CONFIG_ENV_OVERWRITE   1
 
-#undef CONFIG_NET_MULTI
-
 #define MEM_SIZE               128
 
 #undef CONFIG_MEMSIZE_IN_BYTES
index 78b3701..e4bc1d0 100644 (file)
@@ -77,7 +77,6 @@
 /* Ethernet */
 #define CONFIG_DNET            1
 #define CONFIG_DNET_BASE       (CS1_BASE + QONG_FPGA_PERIPH_SIZE)
-#define CONFIG_NET_MULTI       1
 
 /* Framebuffer and LCD */
 #define CONFIG_LCD
index 5fd7838..dc5ec3a 100644 (file)
@@ -48,7 +48,6 @@
 #undef CONFIG_ENV_IS_IN_FLASH
 
 #define CONFIG_PPC4xx_EMAC
-#define CONFIG_NET_MULTI       1
 #define CONFIG_HAS_ETH1                1
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0x01    /* PHY address                  */
index 6575916..a7a92f7 100644 (file)
 /*
  * Network device (RTL8139) support
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_RTL8139
 
 #endif /* __CONFIG_H */
index 408a7e0..b0655c3 100644 (file)
 
 #if defined(CONFIG_CMD_NET)
 /*
-#define CONFIG_NET_MULTI
 #define CONFIG_RTL8169
 */
 /* AX88796L Support(NE2000 base chip) */
index 0802140..59b45c8 100644 (file)
 #define CONFIG_SYS_HZ                  (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
 
 /* Network interface */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_16_BIT
 #define CONFIG_SMC911X_BASE (0x24000000)
index 8801993..c1ffc34 100644 (file)
@@ -70,7 +70,6 @@
 #define CONFIG_SYS_HZ          (CONFIG_SYS_CLK_FREQ / CMT_CLK_DIVIDER)
 
 /* Network interface */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_16_BIT
 #define CONFIG_SMC911X_BASE    0x28000000
index 967a991..1e355a8 100644 (file)
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R
 #define CONFIG_MACB_SEARCH_PHY
index 6f0d728..cab6660 100644 (file)
@@ -64,7 +64,6 @@
 #define CONFIG_MII             1       /* MII PHY management           */
 #define CONFIG_PHY_ADDR                0       /* PHY address                  */
 #define CONFIG_PHY_RESET_DELAY 300     /* Intel LXT971A needs this     */
-#define CONFIG_NET_MULTI
 
 #define CONFIG_EXTRA_ENV_SETTINGS \
        "bootargs=emac(0,0)host:/T221ppc/target/config/sbc405/vxWorks.st " \
index b418cf2..fae95d7 100644 (file)
 #undef PCI_ONE_PCI1
 #endif
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 #define CONFIG_TSEC_ENET               /* TSEC ethernet support */
 
 #if defined(CONFIG_TSEC_ENET)
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
 
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "TSEC0"
index 4ec323e..171058c 100644 (file)
 
 #if defined(CONFIG_PCI)
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "eTSEC0"
index e0af0d2..d219925 100644 (file)
 
 #ifdef CONFIG_TSEC_ENET
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #ifndef CONFIG_MII
 #define CONFIG_MII             1       /* MII PHY management */
 #endif
index 8d9f931..61551ec 100644 (file)
 
 #undef CONFIG_SYS_SCSI_SCAN_BUS_REVERSE
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 /* #define CONFIG_MII          1 */    /* MII PHY management */
 
 #define CONFIG_TSEC1    1
index 852e807..2d6e51d 100644 (file)
 #undef CONFIG_LOADS_ECHO   /* no echo on for serial download   */
 #define CONFIG_SYS_LOADS_BAUD_CHANGE   1       /* allow baudrate change        */
 
-#define CONFIG_NET_MULTI
 /* #define CONFIG_EEPRO100_SROM_WRITE */
 /* #define CONFIG_SHOW_MAC */
 #define CONFIG_EEPRO100
index 1b5d931..180c5da 100644 (file)
 #define CONFIG_SYS_CS5U_VAL 0x00008400
 #define CONFIG_SYS_CS5L_VAL 0x00000D03
 
-#define CONFIG_NET_MULTI               1
 #define CONFIG_DRIVER_DM9000           1
 #define CONFIG_DM9000_BASE             0x16000000
 #define DM9000_IO                      CONFIG_DM9000_BASE
index 9799767..4a5fd0d 100644 (file)
@@ -97,7 +97,6 @@
 #define CONFIG_SYS_NO_FLASH
 
 /* Ether */
-#define CONFIG_NET_MULTI               1
 #define CONFIG_SH_ETHER                        1
 #define CONFIG_SH_ETHER_USE_PORT       0
 #define CONFIG_SH_ETHER_PHY_ADDR       1
index 1221cd5..b8eb13d 100644 (file)
 #define CONFIG_SYS_HZ          1000
 
 /* Ether */
-#define CONFIG_NET_MULTI 1
 #define CONFIG_SH_ETHER 1
 #define CONFIG_SH_ETHER_USE_PORT (1)
 #define CONFIG_SH_ETHER_PHY_ADDR (0x01)
index 8eb9a12..1e71bcc 100644 (file)
 #define CONFIG_PCI_SYS_SIZE    CONFIG_SYS_SDRAM_SIZE
 
 /* Network device (RTL8169) support */
-#define CONFIG_NET_MULTI
 #define CONFIG_RTL8169
 
 /* ENV setting */
index a4a675b..77c0a08 100644 (file)
@@ -54,7 +54,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900          /* we have a CS8900 on-board */
 #define CONFIG_CS8900_BASE     0x19000300
 #define CONFIG_CS8900_BUS16    /* the Linux driver does accesses as shorts */
index d175ed6..4d0b7b2 100644 (file)
@@ -78,7 +78,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_CS8900                  /* we have a CS8900 on-board    */
 #define CONFIG_CS8900_BASE             0x18800300
 #define CONFIG_CS8900_BUS16            /* follow the Linux driver      */
index 19dde1b..6663629 100644 (file)
  * Ethernet Contoller driver
  */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X         1       /* we have a SMC9115 on-board   */
 #define CONFIG_SMC911X_16_BIT  1       /* SMC911X_16_BIT Mode          */
 #define CONFIG_SMC911X_BASE    0x98800300      /* SMC911X Drive Base   */
index 2f97bea..59c9fdb 100644 (file)
 
 /* Ethernet Controllor Driver */
 #ifdef CONFIG_CMD_NET
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC911X
 #define CONFIG_SMC911X_BASE            0x5000000
 #define CONFIG_SMC911X_16_BIT
index 7def16f..cb3c674 100644 (file)
@@ -75,7 +75,6 @@
 /* Ethernet */
 #define CONFIG_MACB
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT         20
 #define CONFIG_RESET_PHY_R
 #define CONFIG_TFTP_PORT
index af62aea..19b978a 100644 (file)
 #endif /* CONFIG_PCI */
 
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_TSEC1   1
 #define CONFIG_TSEC1_NAME      "TSEC0"
index f1cbe95..fe40bf0 100644 (file)
 
 #define CONFIG_TIMESTAMP               /* Print image info with timestamp */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
 
 /*
index d6195b1..f27466c 100644 (file)
@@ -76,7 +76,6 @@
 #define CONFIG_PCI_IO_PHYS     CONFIG_PCI_IO_BUS
 #define CONFIG_PCI_IO_SIZE     0x01000000
 
-#define CONFIG_NET_MULTI       1
 #define CONFIG_EEPRO100                1
 #define CONFIG_SYS_RX_ETH_BUFFER       8  /* use 8 rx buffer on eepro100  */
 #define CONFIG_NS8382X         1
index 66738d5..90d249b 100644 (file)
 
 #if defined(CONFIG_PCI)                        /* PCI Ethernet card */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #undef CONFIG_EEPRO100
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management           */
 
 #define CONFIG_TSEC1   1
index a421ba4..3d385b4 100644 (file)
 
 #if defined(CONFIG_PCI)                        /* PCI Ethernet card */
 #define CONFIG_MPC85XX_PCI2    1
-#define CONFIG_NET_MULTI
 #define CONFIG_PCI_PNP                 /* do pci plug-and-play */
 
 #define CONFIG_EEPRO100
 
 #if defined(CONFIG_TSEC_ENET)
 
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI       1
-#endif
-
 #define CONFIG_MII             1       /* MII PHY management           */
 
 #define CONFIG_TSEC1   1
index 890186e..e7f5a0d 100644 (file)
@@ -95,7 +95,6 @@
 
 #define        CONFIG_RTC_MPC8xx               /* use internal RTC of MPC8xx   */
 
-#define        CONFIG_NET_MULTI        1       /* the only way to get the FEC in */
 #define        FEC_ENET                1       /* eth.c needs it that way... */
 #undef CONFIG_SYS_DISCOVER_PHY
 #define CONFIG_MII             1
index 011a683..fc2b57d 100644 (file)
  */
 #define CONFIG_PCI
 #define CONFIG_PCI_PNP
-#define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
 
index 52055e8..241f210 100644 (file)
@@ -64,7 +64,6 @@
 #define ADI_CMDS_NETWORK       1
 #define CONFIG_BFIN_MAC
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                tcm-bf518
 /* Uncomment next line to use fixed MAC address */
index 2375fc5..2adb071 100644 (file)
@@ -69,7 +69,6 @@
 #define CONFIG_SMC911X_BASE    0x20308000
 #define CONFIG_SMC911X_16_BIT
 #define CONFIG_NETCONSOLE      1
-#define CONFIG_NET_MULTI       1
 #endif
 #define CONFIG_HOSTNAME                tcm-bf537
 /* Uncomment next line to use fixed MAC address */
index 5bca6e1..2c66f33 100644 (file)
 #define CONFIG_MACB
 #define CONFIG_SYS_PHY_ID      1
 #define CONFIG_RMII
-#define CONFIG_NET_MULTI
 #define CONFIG_NET_RETRY_COUNT 20
 
 /* real time clock */
index ec052c4..6ec9b80 100644 (file)
 #define CONFIG_SYS_MCIO0_VAL           0x00008407
 #define CONFIG_SYS_MCIO1_VAL           0x0000c108
 
-#define CONFIG_NET_MULTI               1
 #define CONFIG_DRIVER_DM9000           1
 
 #if CONFIG_POLARIS
index 176d468..6380bb8 100644 (file)
 #define CONFIG_FEC_MXC_PHYADDR         0x1f
 #define CONFIG_MII
 #define CONFIG_CMD_NET
-#define CONFIG_NET_MULTI
 #define BOARD_LATE_INIT
 #define CONFIG_ENV_OVERWRITE
 
index bb9f606..1e59ef3 100644 (file)
@@ -143,7 +143,6 @@ protect on ${u-boot_startaddr} ${u-boot_endaddr}"
 #define CONFIG_PCI                             /* include pci support          */
 #undef CONFIG_PCI_PNP
 #define CONFIG_PCI_SCAN_SHOW
-#define CONFIG_NET_MULTI
 #define CONFIG_EEPRO100
 #define CONFIG_SYS_RX_ETH_BUFFER       8               /* use 8 rx buffer on eepro100  */
 #define CONFIG_EEPRO100_SROM_WRITE
index 325ac8c..9ddc7b1 100644 (file)
@@ -93,7 +93,6 @@
 #define CONFIG_SMC911X_BASE    0x00000000
 #define CONFIG_SMC911X_32_BIT
 #define CONFIG_NET_RETRY_COUNT         20
-#define CONFIG_NET_MULTI
 #endif
 
 /*
index abb57fe..9d37359 100644 (file)
  */
 #define CONFIG_TSEC_ENET               /* TSEC ethernet support */
 
-#define CONFIG_NET_MULTI
 
 #define CONFIG_TSEC1
 #ifdef CONFIG_TSEC1
index 3bfcdff..bb835e0 100644 (file)
@@ -77,7 +77,6 @@
  * Hardware drivers
  */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC_USE_32_BIT
 #define CONFIG_SMC91111_BASE   0x10010000
index d95c0ba..540dfa9 100644 (file)
  * Eth Configs
  */
 #define CONFIG_HAS_ETH1
-#define CONFIG_NET_MULTI
 #define CONFIG_MII
 #define CONFIG_DISCOVER_PHY
 
index d153762..fe2bc1d 100644 (file)
 #endif
 
 #ifndef VME_CADDY2
-#define CONFIG_NET_MULTI
 #endif
 #define CONFIG_PCI_PNP         /* do pci plug-and-play */
 
 #endif
 
 #if defined(CONFIG_TSEC_ENET)
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
 
 #define CONFIG_GMII                    /* MII PHY management */
 #define CONFIG_TSEC1
 
 #endif /* CONFIG_TSEC_ENET */
 
-#if defined(CONFIG_E1000)
-#ifndef CONFIG_NET_MULTI
-#define CONFIG_NET_MULTI
-#endif
-#endif
-
 /*
  * Environment
  */
index ea77971..9db4d99 100644 (file)
@@ -90,7 +90,6 @@
 #define        CONFIG_CMD_PING
 #define        CONFIG_CMD_DHCP
 
-#define        CONFIG_NET_MULTI                1
 #define        CONFIG_DRIVER_DM9000            1
 #define        CONFIG_DM9000_BASE              0x08000300      /* CS2 */
 #define        DM9000_IO                       (CONFIG_DM9000_BASE)
index 205e86c..8a41416 100644 (file)
 /*
  * SMSC91C111 Network Card
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111                1
 #define CONFIG_SMC91111_BASE           0x10000300  /* chip select 3         */
 #define CONFIG_SMC_USE_32_BIT          1          /* 32 bit bus  */
index 32544fe..a35bce3 100644 (file)
@@ -50,7 +50,6 @@
 /*
  * Hardware drivers
  */
-#define CONFIG_NET_MULTI
 #define CONFIG_SMC91111
 #define CONFIG_SMC91111_BASE           0x04000300
 #undef CONFIG_SMC91111_EXT_PHY
index cd7148d..d72921e 100644 (file)
@@ -183,7 +183,6 @@ extern void out32(unsigned int, unsigned long);
  */
 #define CONFIG_PPC4xx_EMAC
 #define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_PHY_RESET       1       /* reset phy upon startup */
 #define CONFIG_SYS_RX_ETH_BUFFER 32    /* Number of ethernet rx buffers & descriptors */
index cb83a64..20b4340 100644 (file)
@@ -361,7 +361,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
  */
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_ETHPRIME                "eTSEC1"
 
index 42517c9..cb29c98 100644 (file)
  */
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_ETHPRIME                "eTSEC1"
 
index 202f209..3481479 100644 (file)
@@ -363,7 +363,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_TSEC_TBI
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
index 0c2e7ed..87c894c 100644 (file)
@@ -333,7 +333,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
  */
 #define CONFIG_TSEC_ENET               /* tsec ethernet support */
 #define CONFIG_PHY_GIGE                1       /* Include GbE speed/duplex detection */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_TSEC_TBI
 #define CONFIG_MII             1       /* MII PHY management */
 #define CONFIG_MII_DEFAULT_TSEC        1       /* Allow unregistered phys */
index f9a6b93..63279b0 100644 (file)
@@ -53,7 +53,6 @@
 #define CONFIG_PHY_ADDR                0x01    /* PHY address                  */
 #define CONFIG_HAS_ETH1                1
 #define CONFIG_PHY1_ADDR       0x11    /* EMAC1 PHY address            */
-#define CONFIG_NET_MULTI       1
 #define CONFIG_SYS_RX_ETH_BUFFER       16      /* Number of ethernet rx buffers & descriptors */
 #define CONFIG_PHY_RESET       1
 #define CONFIG_PHY_RESET_DELAY 300     /* PHY RESET recovery delay     */
index ab7f30f..0d5ee14 100644 (file)
@@ -77,7 +77,6 @@
 #define CONFIG_FEC_MXC
 #define CONFIG_FEC_MXC_PHYADDR         0x00
 #define CONFIG_MII
-#define CONFIG_NET_MULTI
 
 /*
  * BOOTP options