bool "Renesas R2D-PLUS"
select CPU_SH4
-config TARGET_R7780MP
- bool "R7780MP board"
- select CPU_SH4A
-
config TARGET_SH7752EVB
bool "SH7752EVB"
select CPU_SH4A
source "arch/sh/lib/Kconfig"
source "board/renesas/r2dplus/Kconfig"
-source "board/renesas/r7780mp/Kconfig"
source "board/renesas/sh7752evb/Kconfig"
source "board/renesas/sh7753evb/Kconfig"
source "board/renesas/sh7757lcr/Kconfig"
+++ /dev/null
-if TARGET_R7780MP
-
-config SYS_BOARD
- default "r7780mp"
-
-config SYS_VENDOR
- default "renesas"
-
-config SYS_CONFIG_NAME
- default "r7780mp"
-
-endif
+++ /dev/null
-R7780MP BOARD
-M: Nobuhiro Iwamatsu <iwamatsu.nobuhiro@renesas.com>
-M: Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
-S: Maintained
-F: board/renesas/r7780mp/
-F: include/configs/r7780mp.h
-F: configs/r7780mp_defconfig
+++ /dev/null
-# SPDX-License-Identifier: GPL-2.0+
-#
-# Copyright (C) 2007,2008 Nobuhiro Iwamatsu
-#
-# board/r7780mp/Makefile
-#
-
-obj-y := r7780mp.o
-extra-y += lowlevel_init.o
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007,2008 Nobuhiro Iwamatsu
- *
- * u-boot/board/r7780mp/lowlevel_init.S
- */
-
-#include <config.h>
-#include <asm/processor.h>
-#include <asm/macro.h>
-
-/*
- * Board specific low level init code, called _very_ early in the
- * startup sequence. Relocation to SDRAM has not happened yet, no
- * stack is available, bss section has not been initialised, etc.
- *
- * (Note: As no stack is available, no subroutines can be called...).
- */
-
- .global lowlevel_init
-
- .text
- .align 2
-
-lowlevel_init:
-
- write32 CCR_A, CCR_D /* Address of Cache Control Register */
- /* Instruction Cache Invalidate */
-
- write32 FRQCR_A, FRQCR_D /* Frequency control register */
-
- /* pin_multi_setting */
- write32 BBG_PMMR_A, BBG_PMMR_D_PMSR1
-
- write32 BBG_PMSR1_A, BBG_PMSR1_D
-
- write32 BBG_PMMR_A, BBG_PMMR_D_PMSR2
-
- write32 BBG_PMSR2_A, BBG_PMSR2_D
-
- write32 BBG_PMMR_A, BBG_PMMR_D_PMSR3
-
- write32 BBG_PMSR3_A, BBG_PMSR3_D
-
- write32 BBG_PMMR_A, BBG_PMMR_D_PMSR4
-
- write32 BBG_PMSR4_A, BBG_PMSR4_D
-
- write32 BBG_PMMR_A, BBG_PMMR_D_PMSRG
-
- write32 BBG_PMSRG_A, BBG_PMSRG_D
-
- /* cpg_setting */
- write32 FRQCR_A, FRQCR_D
-
- write32 DLLCSR_A, DLLCSR_D
-
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
- nop
-
- /* wait 200us */
- mov.l REPEAT0_R3, r3
- mov #0, r2
-repeat0:
- add #1, r2
- cmp/hs r3, r2
- bf repeat0
- nop
-
- /* bsc_setting */
- write32 MMSELR_A, MMSELR_D
-
- write32 BCR_A, BCR_D
-
- write32 CS0BCR_A, CS0BCR_D
-
- write32 CS1BCR_A, CS1BCR_D
-
- write32 CS2BCR_A, CS2BCR_D
-
- write32 CS4BCR_A, CS4BCR_D
-
- write32 CS5BCR_A, CS5BCR_D
-
- write32 CS6BCR_A, CS6BCR_D
-
- write32 CS0WCR_A, CS0WCR_D
-
- write32 CS1WCR_A, CS1WCR_D
-
- write32 CS2WCR_A, CS2WCR_D
-
- write32 CS4WCR_A, CS4WCR_D
-
- write32 CS5WCR_A, CS5WCR_D
-
- write32 CS6WCR_A, CS6WCR_D
-
- write32 CS5PCR_A, CS5PCR_D
-
- write32 CS6PCR_A, CS6PCR_D
-
- /* ddr_setting */
- /* wait 200us */
- mov.l REPEAT0_R3, r3
- mov #0, r2
-repeat1:
- add #1, r2
- cmp/hs r3, r2
- bf repeat1
- nop
-
- mov.l MIM_U_A, r0
- mov.l MIM_U_D, r1
- synco
- mov.l r1, @r0
- synco
-
- mov.l MIM_L_A, r0
- mov.l MIM_L_D0, r1
- synco
- mov.l r1, @r0
- synco
-
- mov.l STR_L_A, r0
- mov.l STR_L_D, r1
- synco
- mov.l r1, @r0
- synco
-
- mov.l SDR_L_A, r0
- mov.l SDR_L_D, r1
- synco
- mov.l r1, @r0
- synco
-
- nop
- nop
- nop
- nop
-
- mov.l SCR_L_A, r0
- mov.l SCR_L_D0, r1
- synco
- mov.l r1, @r0
- synco
-
- mov.l SCR_L_A, r0
- mov.l SCR_L_D1, r1
- synco
- mov.l r1, @r0
- synco
-
- nop
- nop
- nop
-
- mov.l EMRS_A, r0
- mov.l EMRS_D, r1
- synco
- mov.l r1, @r0
- synco
-
- nop
- nop
- nop
-
- mov.l MRS1_A, r0
- mov.l MRS1_D, r1
- synco
- mov.l r1, @r0
- synco
-
- nop
- nop
- nop
-
- mov.l SCR_L_A, r0
- mov.l SCR_L_D2, r1
- synco
- mov.l r1, @r0
- synco
-
- nop
- nop
- nop
-
- mov.l SCR_L_A, r0
- mov.l SCR_L_D3, r1
- synco
- mov.l r1, @r0
- synco
-
- nop
- nop
- nop
-
- mov.l SCR_L_A, r0
- mov.l SCR_L_D4, r1
- synco
- mov.l r1, @r0
- synco
-
- nop
- nop
- nop
-
- mov.l MRS2_A, r0
- mov.l MRS2_D, r1
- synco
- mov.l r1, @r0
- synco
-
- nop
- nop
- nop
-
- mov.l SCR_L_A, r0
- mov.l SCR_L_D5, r1
- synco
- mov.l r1, @r0
- synco
-
- /* wait 200us */
- mov.l REPEAT0_R1, r3
- mov #0, r2
-repeat2:
- add #1, r2
- cmp/hs r3, r2
- bf repeat2
-
- synco
-
- mov.l MIM_L_A, r0
- mov.l MIM_L_D1, r1
- synco
- mov.l r1, @r0
- synco
-
- rts
- nop
- .align 4
-
-RWTCSR_D_1: .word 0xA507
-RWTCSR_D_2: .word 0xA507
-RWTCNT_D: .word 0x5A00
- .align 2
-
-BBG_PMMR_A: .long 0xFF800010
-BBG_PMSR1_A: .long 0xFF800014
-BBG_PMSR2_A: .long 0xFF800018
-BBG_PMSR3_A: .long 0xFF80001C
-BBG_PMSR4_A: .long 0xFF800020
-BBG_PMSRG_A: .long 0xFF800024
-
-BBG_PMMR_D_PMSR1: .long 0xffffbffd
-BBG_PMSR1_D: .long 0x00004002
-BBG_PMMR_D_PMSR2: .long 0xfc21a7ff
-BBG_PMSR2_D: .long 0x03de5800
-BBG_PMMR_D_PMSR3: .long 0xfffffff8
-BBG_PMSR3_D: .long 0x00000007
-BBG_PMMR_D_PMSR4: .long 0xdffdfff9
-BBG_PMSR4_D: .long 0x20020006
-BBG_PMMR_D_PMSRG: .long 0xffffffff
-BBG_PMSRG_D: .long 0x00000000
-
-FRQCR_A: .long FRQCR
-DLLCSR_A: .long 0xffc40010
-FRQCR_D: .long 0x40233035
-DLLCSR_D: .long 0x00000000
-
-/* for DDR-SDRAM */
-MIM_U_A: .long MIM_1
-MIM_L_A: .long MIM_2
-SCR_U_A: .long SCR_1
-SCR_L_A: .long SCR_2
-STR_U_A: .long STR_1
-STR_L_A: .long STR_2
-SDR_U_A: .long SDR_1
-SDR_L_A: .long SDR_2
-
-EMRS_A: .long 0xFEC02000
-MRS1_A: .long 0xFEC00B08
-MRS2_A: .long 0xFEC00308
-
-MIM_U_D: .long 0x00004000
-MIM_L_D0: .long 0x03e80009
-MIM_L_D1: .long 0x03e80209
-SCR_L_D0: .long 0x3
-SCR_L_D1: .long 0x2
-SCR_L_D2: .long 0x2
-SCR_L_D3: .long 0x4
-SCR_L_D4: .long 0x4
-SCR_L_D5: .long 0x0
-STR_L_D: .long 0x000f0000
-SDR_L_D: .long 0x00000400
-EMRS_D: .long 0x0
-MRS1_D: .long 0x0
-MRS2_D: .long 0x0
-
-/* Cache Controller */
-CCR_A: .long CCR
-MMUCR_A: .long MMUCR
-RWTCNT_A: .long WTCNT
-
-CCR_D: .long 0x0000090b
-CCR_D_2: .long 0x00000103
-MMUCR_D: .long 0x00000004
-MSTPCR0_D: .long 0x00001001
-MSTPCR2_D: .long 0xffffffff
-
-/* local Bus State Controller */
-MMSELR_A: .long MMSELR
-BCR_A: .long BCR
-CS0BCR_A: .long CS0BCR
-CS1BCR_A: .long CS1BCR
-CS2BCR_A: .long CS2BCR
-CS4BCR_A: .long CS4BCR
-CS5BCR_A: .long CS5BCR
-CS6BCR_A: .long CS6BCR
-CS0WCR_A: .long CS0WCR
-CS1WCR_A: .long CS1WCR
-CS2WCR_A: .long CS2WCR
-CS4WCR_A: .long CS4WCR
-CS5WCR_A: .long CS5WCR
-CS6WCR_A: .long CS6WCR
-CS5PCR_A: .long CS5PCR
-CS6PCR_A: .long CS6PCR
-
-MMSELR_D: .long 0xA5A50003
-BCR_D: .long 0x00000000
-CS0BCR_D: .long 0x77777770
-CS1BCR_D: .long 0x77777670
-CS2BCR_D: .long 0x77777770
-CS4BCR_D: .long 0x77777770
-CS5BCR_D: .long 0x77777670
-CS6BCR_D: .long 0x77777770
-CS0WCR_D: .long 0x00020006
-CS1WCR_D: .long 0x00232304
-CS2WCR_D: .long 0x7777770F
-CS4WCR_D: .long 0x7777770F
-CS5WCR_D: .long 0x00101006
-CS6WCR_D: .long 0x77777703
-CS5PCR_D: .long 0x77000000
-CS6PCR_D: .long 0x77000000
-
-REPEAT0_R3: .long 0x00002000
-REPEAT0_R1: .long 0x0000200
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
- */
-
-#include <common.h>
-#include <ide.h>
-#include <init.h>
-#include <net.h>
-#include <asm/processor.h>
-#include <asm/io.h>
-#include <asm/pci.h>
-#include <netdev.h>
-#include "r7780mp.h"
-
-int checkboard(void)
-{
-#if defined(CONFIG_R7780MP)
- puts("BOARD: Renesas Solutions R7780MP\n");
-#else
- puts("BOARD: Renesas Solutions R7780RP\n");
-#endif
- return 0;
-}
-
-int board_init(void)
-{
- /* SCIF Enable */
- writew(0x0, PHCR);
-
- return 0;
-}
-
-void led_set_state(unsigned short value)
-{
-
-}
-
-void ide_set_reset(int idereset)
-{
- /* if reset = 1 IDE reset will be asserted */
- if (idereset) {
- writew(0x432, FPGA_CFCTL);
-#if defined(CONFIG_R7780MP)
- writew(inw(FPGA_CFPOW)|0x01, FPGA_CFPOW);
-#else
- writew(inw(FPGA_CFPOW)|0x02, FPGA_CFPOW);
-#endif
- writew(0x01, FPGA_CFCDINTCLR);
- }
-}
-
-static struct pci_controller hose;
-void pci_init_board(void)
-{
- pci_sh7780_init(&hose);
-}
-
-int board_eth_init(struct bd_info *bis)
-{
- /* return >= 0 if a chip is found, the board's AX88796L is n2k-based */
- return ne2k_register() + pci_eth_init(bis);
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Copyright (C) 2007 Nobuhiro Iwamatsu
- * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
- *
- * u-boot/board/r7780mp/r7780mp.h
- */
-
-#ifndef _BOARD_R7780MP_R7780MP_H_
-#define _BOARD_R7780MP_R7780MP_H_
-
-/* R7780MP's FPGA register map */
-#define FPGA_BASE 0xa4000000
-#define FPGA_IRLMSK (FPGA_BASE + 0x00)
-#define FPGA_IRLMON (FPGA_BASE + 0x02)
-#define FPGA_IRLPRI1 (FPGA_BASE + 0x04)
-#define FPGA_IRLPRI2 (FPGA_BASE + 0x06)
-#define FPGA_IRLPRI3 (FPGA_BASE + 0x08)
-#define FPGA_IRLPRI4 (FPGA_BASE + 0x0A)
-#define FPGA_RSTCTL (FPGA_BASE + 0x0C)
-#define FPGA_PCIBD (FPGA_BASE + 0x0E)
-#define FPGA_PCICD (FPGA_BASE + 0x10)
-#define FPGA_EXTGIO (FPGA_BASE + 0x16)
-#define FPGA_IVDRMON (FPGA_BASE + 0x18)
-#define FPGA_IVDRCR (FPGA_BASE + 0x1A)
-#define FPGA_OBLED (FPGA_BASE + 0x1C)
-#define FPGA_OBSW (FPGA_BASE + 0x1E)
-#define FPGA_TPCTL (FPGA_BASE + 0x100)
-#define FPGA_TPDCKCTL (FPGA_BASE + 0x102)
-#define FPGA_TPCLR (FPGA_BASE + 0x104)
-#define FPGA_TPXPOS (FPGA_BASE + 0x106)
-#define FPGA_TPYPOS (FPGA_BASE + 0x108)
-#define FPGA_DBSW (FPGA_BASE + 0x200)
-#define FPGA_VERSION (FPGA_BASE + 0x700)
-#define FPGA_CFCTL (FPGA_BASE + 0x300)
-#define FPGA_CFPOW (FPGA_BASE + 0x302)
-#define FPGA_CFCDINTCLR (FPGA_BASE + 0x304)
-#define FPGA_PMR (FPGA_BASE + 0x900)
-
-#endif /* _BOARD_R7780RP_R7780RP_H_ */
+++ /dev/null
-CONFIG_SH=y
-CONFIG_SYS_TEXT_BASE=0x0FFC0000
-CONFIG_ENV_SIZE=0x40000
-CONFIG_ENV_SECT_SIZE=0x40000
-CONFIG_TARGET_R7780MP=y
-CONFIG_BOOTDELAY=3
-CONFIG_USE_BOOTARGS=y
-CONFIG_BOOTARGS="console=ttySC0,115200"
-# CONFIG_CMDLINE_EDITING is not set
-# CONFIG_AUTO_COMPLETE is not set
-# CONFIG_CMD_BDI is not set
-# CONFIG_CMD_CONSOLE is not set
-# CONFIG_CMD_BOOTD is not set
-# CONFIG_CMD_RUN is not set
-# CONFIG_CMD_IMI is not set
-# CONFIG_CMD_XIMG is not set
-# CONFIG_CMD_EDITENV is not set
-# CONFIG_CMD_ENV_EXISTS is not set
-CONFIG_CMD_IDE=y
-# CONFIG_CMD_LOADB is not set
-# CONFIG_CMD_LOADS is not set
-CONFIG_CMD_PCI=y
-CONFIG_CMD_SDRAM=y
-# CONFIG_CMD_ECHO is not set
-# CONFIG_CMD_ITEST is not set
-# CONFIG_CMD_SOURCE is not set
-# CONFIG_CMD_SETEXPR is not set
-CONFIG_CMD_PING=y
-# CONFIG_CMD_SLEEP is not set
-CONFIG_CMD_EXT2=y
-CONFIG_DOS_PARTITION=y
-CONFIG_ENV_OVERWRITE=y
-CONFIG_ENV_IS_IN_FLASH=y
-CONFIG_ENV_ADDR=0xA0040000
-CONFIG_MTD_NOR_FLASH=y
-CONFIG_FLASH_CFI_DRIVER=y
-CONFIG_SYS_FLASH_CFI=y
-CONFIG_PCI=y
-CONFIG_SCIF_CONSOLE=y
-CONFIG_USE_PRIVATE_LIBGCC=y
^^^^^^^^^^^^^^
This CPU has the SH4AL-DSP core.
-Renesas SH7780
-^^^^^^^^^^^^^^
-This CPU has the SH4A core.
-
Supported Boards
----------------
- NOR Flash
- Marubun PCMCIA
-Renesas R7780MP
-^^^^^^^^^^^^^^^
-Board specific code is in board/r7780mp
-To use this board, type "make r7780mp_config".
-Support devices are:
-
- - SCIF
- - DDR-SDRAM
- - NOR Flash
- - Compact Flash
- - ASIX ethernet
- - SH7780 PCI bridge
- - RTL8110 ethernet
-
In SuperH, S-record and binary of made u-boot work on the memory.
When u-boot is written in the flash, it is necessary to change the
address by using 'objcopy'::
obj-$(CONFIG_MVPP2) += mvpp2.o
obj-$(CONFIG_NATSEMI) += natsemi.o
obj-$(CONFIG_DRIVER_NE2000) += ne2000.o ne2000_base.o
-obj-$(CONFIG_DRIVER_AX88796L) += ax88796.o ne2000_base.o
obj-$(CONFIG_NETCONSOLE) += netconsole.o
obj-$(CONFIG_NS8382X) += ns8382x.o
obj-$(CONFIG_PCH_GBE) += pch_gbe.o
+++ /dev/null
-// SPDX-License-Identifier: GPL-2.0+
-/*
- * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- */
-#include <common.h>
-#include <linux/delay.h>
-#include "ax88796.h"
-
-/*
- * Set 1 bit data
- */
-static void ax88796_bitset(u32 bit)
-{
- /* DATA1 */
- if( bit )
- EEDI_HIGH;
- else
- EEDI_LOW;
-
- EECLK_LOW;
- udelay(1000);
- EECLK_HIGH;
- udelay(1000);
- EEDI_LOW;
-}
-
-/*
- * Get 1 bit data
- */
-static u8 ax88796_bitget(void)
-{
- u8 bit;
-
- EECLK_LOW;
- udelay(1000);
- /* DATA */
- bit = EEDO;
- EECLK_HIGH;
- udelay(1000);
-
- return bit;
-}
-
-/*
- * Send COMMAND to EEPROM
- */
-static void ax88796_eep_cmd(u8 cmd)
-{
- ax88796_bitset(BIT_DUMMY);
- switch(cmd){
- case MAC_EEP_READ:
- ax88796_bitset(1);
- ax88796_bitset(1);
- ax88796_bitset(0);
- break;
-
- case MAC_EEP_WRITE:
- ax88796_bitset(1);
- ax88796_bitset(0);
- ax88796_bitset(1);
- break;
-
- case MAC_EEP_ERACE:
- ax88796_bitset(1);
- ax88796_bitset(1);
- ax88796_bitset(1);
- break;
-
- case MAC_EEP_EWEN:
- ax88796_bitset(1);
- ax88796_bitset(0);
- ax88796_bitset(0);
- break;
-
- case MAC_EEP_EWDS:
- ax88796_bitset(1);
- ax88796_bitset(0);
- ax88796_bitset(0);
- break;
- default:
- break;
- }
-}
-
-static void ax88796_eep_setaddr(u16 addr)
-{
- int i ;
-
- for( i = 7 ; i >= 0 ; i-- )
- ax88796_bitset(addr & (1 << i));
-}
-
-/*
- * Get data from EEPROM
- */
-static u16 ax88796_eep_getdata(void)
-{
- ushort data = 0;
- int i;
-
- ax88796_bitget(); /* DUMMY */
- for( i = 0 ; i < 16 ; i++ ){
- data <<= 1;
- data |= ax88796_bitget();
- }
- return data;
-}
-
-static void ax88796_mac_read(u8 *buff)
-{
- int i ;
- u16 data;
- u16 addr = 0;
-
- for( i = 0 ; i < 3; i++ )
- {
- EECS_HIGH;
- EEDI_LOW;
- udelay(1000);
- /* READ COMMAND */
- ax88796_eep_cmd(MAC_EEP_READ);
- /* ADDRESS */
- ax88796_eep_setaddr(addr++);
- /* GET DATA */
- data = ax88796_eep_getdata();
- *buff++ = (uchar)(data & 0xff);
- *buff++ = (uchar)((data >> 8) & 0xff);
- EECLK_LOW;
- EEDI_LOW;
- EECS_LOW;
- }
-}
-
-int get_prom(u8* mac_addr, u8* base_addr)
-{
- u8 prom[32];
- int i;
-
- ax88796_mac_read(prom);
- for (i = 0; i < 6; i++){
- mac_addr[i] = prom[i];
- }
- return 1;
-}
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * AX88796L(NE2000) support
- *
- * (c) 2007 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- */
-
-#ifndef __DRIVERS_AX88796L_H__
-#define __DRIVERS_AX88796L_H__
-
-#define DP_DATA (0x10 << 1)
-#define START_PG 0x40 /* First page of TX buffer */
-#define START_PG2 0x48
-#define STOP_PG 0x80 /* Last page +1 of RX ring */
-#define TX_PAGES 12
-#define RX_START (START_PG+TX_PAGES)
-#define RX_END STOP_PG
-
-#define AX88796L_BASE_ADDRESS CONFIG_DRIVER_NE2000_BASE
-#define AX88796L_BYTE_ACCESS 0x00001000
-#define AX88796L_OFFSET 0x00000400
-#define AX88796L_ADDRESS_BYTE AX88796L_BASE_ADDRESS + \
- AX88796L_BYTE_ACCESS + AX88796L_OFFSET
-#define AX88796L_REG_MEMR AX88796L_ADDRESS_BYTE + (0x14<<1)
-#define AX88796L_REG_CR AX88796L_ADDRESS_BYTE + (0x00<<1)
-
-#define AX88796L_CR (*(vu_short *)(AX88796L_REG_CR))
-#define AX88796L_MEMR (*(vu_short *)(AX88796L_REG_MEMR))
-
-#define EECS_HIGH (AX88796L_MEMR |= 0x10)
-#define EECS_LOW (AX88796L_MEMR &= 0xef)
-#define EECLK_HIGH (AX88796L_MEMR |= 0x80)
-#define EECLK_LOW (AX88796L_MEMR &= 0x7f)
-#define EEDI_HIGH (AX88796L_MEMR |= 0x20)
-#define EEDI_LOW (AX88796L_MEMR &= 0xdf)
-#define EEDO ((AX88796L_MEMR & 0x40)>>6)
-
-#define PAGE0_SET (AX88796L_CR &= 0x3f)
-#define PAGE1_SET (AX88796L_CR = (AX88796L_CR & 0x3f) | 0x40)
-
-#define BIT_DUMMY 0
-#define MAC_EEP_READ 1
-#define MAC_EEP_WRITE 2
-#define MAC_EEP_ERACE 3
-#define MAC_EEP_EWEN 4
-#define MAC_EEP_EWDS 5
-
-/* R7780MP Specific code */
-#if defined(CONFIG_R7780MP)
-#define ISA_OFFSET 0x1400
-#define DP_IN(_b_, _o_, _d_) (_d_) = \
- *( (vu_short *) ((_b_) + ((_o_) * 2) + ISA_OFFSET))
-#define DP_OUT(_b_, _o_, _d_) \
- *((vu_short *)((_b_) + ((_o_) * 2) + ISA_OFFSET)) = (_d_)
-#define DP_IN_DATA(_b_, _d_) (_d_) = *( (vu_short *) ((_b_) + ISA_OFFSET))
-#define DP_OUT_DATA(_b_, _d_) *( (vu_short *) ((_b_)+ISA_OFFSET)) = (_d_)
-#else
-/* Please change for your target boards */
-#define ISA_OFFSET 0x0000
-#define DP_IN(_b_, _o_, _d_) (_d_) = *( (vu_short *)((_b_)+(_o_ )+ISA_OFFSET))
-#define DP_OUT(_b_, _o_, _d_) *((vu_short *)((_b_)+(_o_)+ISA_OFFSET)) = (_d_)
-#define DP_IN_DATA(_b_, _d_) (_d_) = *( (vu_short *) ((_b_)+ISA_OFFSET))
-#define DP_OUT_DATA(_b_, _d_) *( (vu_short *) ((_b_)+ISA_OFFSET)) = (_d_)
-#endif
-
-#endif /* __DRIVERS_AX88796L_H__ */
+++ /dev/null
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * Configuation settings for the Renesas R7780MP board
- *
- * Copyright (C) 2007,2008 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
- * Copyright (C) 2008 Yusuke Goda <goda.yusuke@renesas.com>
- */
-
-#ifndef __R7780RP_H
-#define __R7780RP_H
-
-#define CONFIG_CPU_SH7780 1
-#define CONFIG_R7780MP 1
-#define CONFIG_SYS_R7780MP_OLD_FLASH 1
-#define __LITTLE_ENDIAN__ 1
-
-#define CONFIG_DISPLAY_BOARDINFO
-
-#define CONFIG_CONS_SCIF0 1
-
-#define CONFIG_SYS_SDRAM_BASE (0x08000000)
-#define CONFIG_SYS_SDRAM_SIZE (128 * 1024 * 1024)
-
-#define CONFIG_SYS_PBSIZE 256
-
-/* Flash board support */
-#define CONFIG_SYS_FLASH_BASE (0xA0000000)
-#ifdef CONFIG_SYS_R7780MP_OLD_FLASH
-/* NOR Flash (S29PL127J60TFI130) */
-# define CONFIG_SYS_FLASH_CFI_WIDTH FLASH_CFI_32BIT
-# define CONFIG_SYS_MAX_FLASH_BANKS (2)
-# define CONFIG_SYS_MAX_FLASH_SECT 270
-# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE,\
- CONFIG_SYS_FLASH_BASE + 0x100000,\
- CONFIG_SYS_FLASH_BASE + 0x400000,\
- CONFIG_SYS_FLASH_BASE + 0x700000, }
-#else /* CONFIG_SYS_R7780MP_OLD_FLASH */
-/* NOR Flash (Spantion S29GL256P) */
-# define CONFIG_SYS_MAX_FLASH_BANKS (1)
-# define CONFIG_SYS_MAX_FLASH_SECT 256
-# define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#endif /* CONFIG_SYS_R7780MP_OLD_FLASH */
-
-#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 4 * 1024 * 1024)
-/* Address of u-boot image in Flash */
-#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_LEN (256 * 1024)
-/* Size of DRAM reserved for malloc() use */
-#define CONFIG_SYS_MALLOC_LEN (1204 * 1024)
-
-#define CONFIG_SYS_BOOTMAPSZ (8 * 1024 * 1024)
-#define CONFIG_SYS_RX_ETH_BUFFER (8)
-
-#undef CONFIG_SYS_FLASH_CFI_BROKEN_TABLE
-#undef CONFIG_SYS_FLASH_QUIET_TEST
-/* print 'E' for empty sector on flinfo */
-#define CONFIG_SYS_FLASH_EMPTY_INFO
-
-#define CONFIG_SYS_FLASH_ERASE_TOUT 120000
-#define CONFIG_SYS_FLASH_WRITE_TOUT 500
-
-/* Board Clock */
-#define CONFIG_SYS_CLK_FREQ 33333333
-#define CONFIG_SH_SCIF_CLK_FREQ CONFIG_SYS_CLK_FREQ
-
-/* PCI Controller */
-#if defined(CONFIG_CMD_PCI)
-#define CONFIG_SH4_PCI
-#define CONFIG_SH7780_PCI
-#define CONFIG_SH7780_PCI_LSR 0x07f00001
-#define CONFIG_SH7780_PCI_LAR CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_SH7780_PCI_BAR CONFIG_SYS_SDRAM_SIZE
-#define CONFIG_PCI_SCAN_SHOW 1
-#define __mem_pci
-
-#define CONFIG_PCI_MEM_BUS 0xFD000000 /* Memory space base addr */
-#define CONFIG_PCI_MEM_PHYS CONFIG_PCI_MEM_BUS
-#define CONFIG_PCI_MEM_SIZE 0x01000000 /* Size of Memory window */
-
-#define CONFIG_PCI_IO_BUS 0xFE200000 /* IO space base address */
-#define CONFIG_PCI_IO_PHYS CONFIG_PCI_IO_BUS
-#define CONFIG_PCI_IO_SIZE 0x00200000 /* Size of IO window */
-#define CONFIG_PCI_SYS_PHYS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_BUS CONFIG_SYS_SDRAM_BASE
-#define CONFIG_PCI_SYS_SIZE CONFIG_SYS_SDRAM_SIZE
-#endif /* CONFIG_CMD_PCI */
-
-#if defined(CONFIG_CMD_NET)
-/* AX88796L Support(NE2000 base chip) */
-#define CONFIG_DRIVER_AX88796L
-#define CONFIG_DRIVER_NE2000_BASE 0xA4100000
-#endif
-
-/* Compact flash Support */
-#if defined(CONFIG_IDE)
-#define CONFIG_IDE_RESET 1
-#define CONFIG_SYS_PIO_MODE 1
-#define CONFIG_SYS_IDE_MAXBUS 1 /* IDE bus */
-#define CONFIG_SYS_IDE_MAXDEVICE 1
-#define CONFIG_SYS_ATA_BASE_ADDR 0xb4000000
-#define CONFIG_SYS_ATA_STRIDE 2 /* 1bit shift */
-#define CONFIG_SYS_ATA_DATA_OFFSET 0x1000 /* data reg offset */
-#define CONFIG_SYS_ATA_REG_OFFSET 0x1000 /* reg offset */
-#define CONFIG_SYS_ATA_ALT_OFFSET 0x800 /* alternate register offset */
-#define CONFIG_IDE_SWAP_IO
-#endif /* CONFIG_IDE */
-
-#endif /* __R7780RP_H */
projects / platform / kernel / u-boot.git / commitdiff