M: Stefan Roese <sr@denx.de>
S: Maintained
T: git git://git.denx.de/u-boot-cfi-flash.git
-F: drivers/mtd/*
+F: drivers/mtd/cfi_flash.c
+F: drivers/mtd/jedec_flash.c
COLDFIRE
M: Jason Jin <jason.jin@freescale.com>
-#
-# (C) Copyright 2000-2013
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# SPDX-License-Identifier: GPL-2.0+
-#
-
VERSION = 2014
PATCHLEVEL = 10
SUBLEVEL =
# Comments in this file are targeted only to the developer, do not
# expect to learn how to build the kernel reading this file.
-# Do not:
-# o use make's built-in rules and variables
-# (this increases performance and avoids hard-to-debug behaviour);
-# o print "Entering directory ...";
-MAKEFLAGS += -rR --no-print-directory
+# Do not use make's built-in rules and variables
+# (this increases performance and avoids hard-to-debug behaviour);
+MAKEFLAGS += -rR
# Avoid funny character set dependencies
unexport LC_ALL
LC_NUMERIC=C
export LC_COLLATE LC_NUMERIC
+# Avoid interference with shell env settings
+unexport GREP_OPTIONS
+
# We are using a recursive build, so we need to do a little thinking
# to get the ordering right.
#
# descending is started. They are now explicitly listed as the
# prepare rule.
+# Beautify output
+# ---------------------------------------------------------------------------
+#
+# Normally, we echo the whole command before executing it. By making
+# that echo $($(quiet)$(cmd)), we now have the possibility to set
+# $(quiet) to choose other forms of output instead, e.g.
+#
+# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
+# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
+#
+# If $(quiet) is empty, the whole command will be printed.
+# If it is set to "quiet_", only the short version will be printed.
+# If it is set to "silent_", nothing will be printed at all, since
+# the variable $(silent_cmd_cc_o_c) doesn't exist.
+#
+# A simple variant is to prefix commands with $(Q) - that's useful
+# for commands that shall be hidden in non-verbose mode.
+#
+# $(Q)ln $@ :<
+#
+# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
+# If KBUILD_VERBOSE equals 1 then the above command is displayed.
+#
# To put more focus on warnings, be less verbose as default
# Use 'make V=1' to see the full commands
KBUILD_VERBOSE = 0
endif
-# Call a source code checker (by default, "sparse") as part of the
-# C compilation.
-#
-# Use 'make C=1' to enable checking of only re-compiled files.
-# Use 'make C=2' to enable checking of *all* source files, regardless
-# of whether they are re-compiled or not.
-#
-# See the file "Documentation/sparse.txt" for more details, including
-# where to get the "sparse" utility.
+ifeq ($(KBUILD_VERBOSE),1)
+ quiet =
+ Q =
+else
+ quiet=quiet_
+ Q = @
+endif
-ifeq ("$(origin C)", "command line")
- KBUILD_CHECKSRC = $(C)
+# If the user is running make -s (silent mode), suppress echoing of
+# commands
+
+ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
+ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
+ quiet=silent_
endif
-ifndef KBUILD_CHECKSRC
- KBUILD_CHECKSRC = 0
+else # make-3.8x
+ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
+ quiet=silent_
endif
-
-# Use make M=dir to specify directory of external module to build
-# Old syntax make ... SUBDIRS=$PWD is still supported
-# Setting the environment variable KBUILD_EXTMOD take precedence
-ifdef SUBDIRS
- KBUILD_EXTMOD ?= $(SUBDIRS)
endif
-ifeq ("$(origin M)", "command line")
- KBUILD_EXTMOD := $(M)
-endif
+export quiet Q KBUILD_VERBOSE
# kbuild supports saving output files in a separate directory.
# To locate output files in a separate directory two syntaxes are supported.
# The O= assignment takes precedence over the KBUILD_OUTPUT environment
# variable.
-
# KBUILD_SRC is set on invocation of make in OBJ directory
# KBUILD_SRC is not intended to be used by the regular user (for now)
ifeq ($(KBUILD_SRC),)
@:
sub-make: FORCE
- $(if $(KBUILD_VERBOSE:1=),@)$(MAKE) -C $(KBUILD_OUTPUT) \
- KBUILD_SRC=$(CURDIR) \
- KBUILD_EXTMOD="$(KBUILD_EXTMOD)" -f $(CURDIR)/Makefile \
- $(filter-out _all sub-make,$(MAKECMDGOALS))
+ $(Q)$(MAKE) -C $(KBUILD_OUTPUT) KBUILD_SRC=$(CURDIR) \
+ -f $(CURDIR)/Makefile $(filter-out _all sub-make,$(MAKECMDGOALS))
# Leave processing to above invocation of make
skip-makefile := 1
# We process the rest of the Makefile if this is the final invocation of make
ifeq ($(skip-makefile),)
+# Do not print "Entering directory ...",
+# but we want to display it when entering to the output directory
+# so that IDEs/editors are able to understand relative filenames.
+MAKEFLAGS += --no-print-directory
+
+# Call a source code checker (by default, "sparse") as part of the
+# C compilation.
+#
+# Use 'make C=1' to enable checking of only re-compiled files.
+# Use 'make C=2' to enable checking of *all* source files, regardless
+# of whether they are re-compiled or not.
+#
+# See the file "Documentation/sparse.txt" for more details, including
+# where to get the "sparse" utility.
+
+ifeq ("$(origin C)", "command line")
+ KBUILD_CHECKSRC = $(C)
+endif
+ifndef KBUILD_CHECKSRC
+ KBUILD_CHECKSRC = 0
+endif
+
+# Use make M=dir to specify directory of external module to build
+# Old syntax make ... SUBDIRS=$PWD is still supported
+# Setting the environment variable KBUILD_EXTMOD take precedence
+ifdef SUBDIRS
+ KBUILD_EXTMOD ?= $(SUBDIRS)
+endif
+
+ifeq ("$(origin M)", "command line")
+ KBUILD_EXTMOD := $(M)
+endif
+
# If building an external module we do not care about the all: rule
# but instead _all depend on modules
PHONY += all
_all: modules
endif
-srctree := $(if $(KBUILD_SRC),$(KBUILD_SRC),$(CURDIR))
-objtree := $(CURDIR)
+ifeq ($(KBUILD_SRC),)
+ # building in the source tree
+ srctree := .
+else
+ ifeq ($(KBUILD_SRC)/,$(dir $(CURDIR)))
+ # building in a subdirectory of the source tree
+ srctree := ..
+ else
+ srctree := $(KBUILD_SRC)
+ endif
+endif
+objtree := .
src := $(srctree)
obj := $(objtree)
export KBUILD_MODULES KBUILD_BUILTIN
export KBUILD_CHECKSRC KBUILD_SRC KBUILD_EXTMOD
-# Beautify output
-# ---------------------------------------------------------------------------
-#
-# Normally, we echo the whole command before executing it. By making
-# that echo $($(quiet)$(cmd)), we now have the possibility to set
-# $(quiet) to choose other forms of output instead, e.g.
-#
-# quiet_cmd_cc_o_c = Compiling $(RELDIR)/$@
-# cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $<
-#
-# If $(quiet) is empty, the whole command will be printed.
-# If it is set to "quiet_", only the short version will be printed.
-# If it is set to "silent_", nothing will be printed at all, since
-# the variable $(silent_cmd_cc_o_c) doesn't exist.
-#
-# A simple variant is to prefix commands with $(Q) - that's useful
-# for commands that shall be hidden in non-verbose mode.
-#
-# $(Q)ln $@ :<
-#
-# If KBUILD_VERBOSE equals 0 then the above command will be hidden.
-# If KBUILD_VERBOSE equals 1 then the above command is displayed.
-
-ifeq ($(KBUILD_VERBOSE),1)
- quiet =
- Q =
-else
- quiet=quiet_
- Q = @
-endif
-
-# If the user is running make -s (silent mode), suppress echoing of
-# commands
-
-ifneq ($(filter 4.%,$(MAKE_VERSION)),) # make-4
-ifneq ($(filter %s ,$(firstword x$(MAKEFLAGS))),)
- quiet=silent_
-endif
-else # make-3.8x
-ifneq ($(filter s% -s%,$(MAKEFLAGS)),)
- quiet=silent_
-endif
-endif
-
-export quiet Q KBUILD_VERBOSE
-
# Look for make include files relative to root of kernel src
MAKEFLAGS += --include-dir=$(srctree)
cmd_pad_cat = $(cmd_objcopy) && $(append) || rm -f $@
all: $(ALL-y)
+ifneq ($(CONFIG_SYS_GENERIC_BOARD),y)
+ @echo "===================== WARNING ======================"
+ @echo "Please convert this board to generic board."
+ @echo "Otherwise it will be removed by the end of 2014."
+ @echo "See doc/README.generic-board for further information"
+ @echo "===================================================="
+endif
PHONY += dtbs
dtbs dts/dt.dtb: checkdtc u-boot
u-boot.ldr: u-boot
$(CREATE_LDR_ENV)
- $(LDR) -T $(CONFIG_BFIN_CPU) -c $@ $< $(LDR_FLAGS)
+ $(LDR) -T $(CONFIG_CPU) -c $@ $< $(LDR_FLAGS)
$(BOARD_SIZE_CHECK)
OBJCOPYFLAGS_u-boot.ldr.hex := -I binary -O ihex
# make distclean Remove editor backup files, patch leftover files and the like
# Directories & files removed with 'make clean'
-CLEAN_DIRS += $(MODVERDIR)
-CLEAN_FILES += u-boot.lds include/bmp_logo.h include/bmp_logo_data.h
-
-# Directories & files removed with 'make clobber'
-CLOBBER_DIRS += $(foreach d, spl tpl, $(patsubst %,$d/%, \
+CLEAN_DIRS += $(MODVERDIR) \
+ $(foreach d, spl tpl, $(patsubst %,$d/%, \
$(filter-out include, $(shell ls -1 $d 2>/dev/null))))
-CLOBBER_FILES += u-boot* MLO* SPL System.map
+
+CLEAN_FILES += include/bmp_logo.h include/bmp_logo_data.h \
+ u-boot* MLO* SPL System.map
# Directories & files removed with 'make mrproper'
MRPROPER_DIRS += include/config include/generated spl tpl \
-o -name modules.builtin -o -name '.tmp_*.o.*' \
-o -name '*.gcno' \) -type f -print | xargs rm -f
-# clobber
-#
-clobber: rm-dirs := $(CLOBBER_DIRS)
-clobber: rm-files := $(CLOBBER_FILES)
-
-PHONY += clobber
-
-clobber: clean
- $(call cmd,rmdirs)
- $(call cmd,rmfiles)
-
# mrproper - Delete all generated files, including .config
#
mrproper: rm-dirs := $(wildcard $(MRPROPER_DIRS))
$(mrproper-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _mrproper_%,%,$@)
-mrproper: clobber $(mrproper-dirs)
+mrproper: clean $(mrproper-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
@rm -f arch/*/include/asm/arch
help:
@echo 'Cleaning targets:'
- @echo ' clean - Remove most generated files but keep the config and'
- @echo ' necessities for testing u-boot'
- @echo ' clobber - Remove most generated files but keep the config'
+ @echo ' clean - Remove most generated files but keep the config'
@echo ' mrproper - Remove all generated files + config + various backup files'
@echo ' distclean - mrproper + remove editor backup and patch files'
@echo ''
@echo ''
@echo 'Other generic targets:'
@echo ' all - Build all necessary images depending on configuration'
- @echo ' u-boot - Build the bare u-boot'
+ @echo '* u-boot - Build the bare u-boot'
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[oisS] - Build specified target only'
@echo ' dir/file.lst - Build specified mixed source/assembly target only'
@echo ' tags/ctags - Generate ctags file for editors'
@echo ' etags - Generate etags file for editors'
@echo ' cscope - Generate cscope index'
- @echo ' ubootrelease - Output the release version string'
- @echo ' ubootversion - Output the version stored in Makefile'
+ @echo ' ubootrelease - Output the release version string (use with make -s)'
+ @echo ' ubootversion - Output the version stored in Makefile (use with make -s)'
@echo ''
@echo 'Static analysers'
@echo ' checkstack - Generate a list of stack hogs'
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+clean := -f $(srctree)/scripts/Makefile.clean obj
endif # skip-makefile
make O=/tmp/build NAME_defconfig
make O=/tmp/build all
-2. Set environment variable BUILD_DIR to point to the desired location:
+2. Set environment variable KBUILD_OUTPUT to point to the desired location:
- export BUILD_DIR=/tmp/build
+ export KBUILD_OUTPUT=/tmp/build
make distclean
make NAME_defconfig
make all
-Note that the command line "O=" setting overrides the BUILD_DIR environment
+Note that the command line "O=" setting overrides the KBUILD_OUTPUT environment
variable.
source "board/xaeniax/Kconfig"
source "board/zipitz2/Kconfig"
+source "arch/arm/Kconfig.debug"
+
endmenu
--- /dev/null
+menu "ARM debug"
+
+config DEBUG_LL
+ bool "Low-level debugging functions"
+ depends on !ARM64
+ help
+ Say Y here to include definitions of printascii, printch, printhex
+ in U-Boot. This is helpful if you are debugging code that
+ executes before the console is initialized.
+
+choice
+ prompt "Low-level debugging port"
+ depends on DEBUG_LL
+
+ config DEBUG_LL_UART_8250
+ bool "Low-level debugging via 8250 UART"
+ help
+ Say Y here if you wish the debug print routes to direct
+ their output to an 8250 UART. You can use this option
+ to provide the parameters for the 8250 UART rather than
+ selecting one of the platform specific options above if
+ you know the parameters for the port.
+
+ This option is preferred over the platform specific
+ options; the platform specific options are deprecated
+ and will be soon removed.
+
+endchoice
+
+config DEBUG_LL_INCLUDE
+ string
+ depends on DEBUG_LL
+ default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ default "mach/debug-macro.S"
+
+# Compatibility options for 8250
+config DEBUG_UART_8250
+ bool
+
+config DEBUG_UART_PHYS
+ hex "Physical base address of debug UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+
+# This is not used in U-Boot
+config DEBUG_UART_VIRT
+ hex
+ default DEBUG_UART_PHYS
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+
+config DEBUG_UART_8250_SHIFT
+ int "Register offset shift for the 8250 debug UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ default 2
+
+config DEBUG_UART_8250_WORD
+ bool "Use 32-bit accesses for 8250 UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+ depends on DEBUG_UART_8250_SHIFT >= 2
+
+config DEBUG_UART_8250_FLOW_CONTROL
+ bool "Enable flow control for 8250 UART"
+ depends on DEBUG_LL_UART_8250 || DEBUG_UART_8250
+
+endmenu
int i;
for (i = 0; i < 8; i++) {
+ /* cppcheck-suppress nullPointer */
vt[i] = ldr_pc;
+ /* cppcheck-suppress nullPointer */
vt[i + 8] = start_addr + (4 * i);
}
}
* fine.
*/
extern uint32_t _start;
+
+ /* cppcheck-suppress nullPointer */
memcpy(0x0, &_start, 0x60);
}
TIMROT_RUNNING_COUNTn_RUNNING_COUNT_OFFSET;
#elif defined(CONFIG_MX28)
now = readl(&timrot_regs->hw_timrot_running_count0);
+#else
+#error "Don't know how to read timrot_regs"
#endif
if (lastdec >= now) {
#include <asm/arch/cpu.h>
#include <asm/arch/clock.h>
#include <power/tps65910.h>
+#include <linux/compiler.h>
struct ctrl_stat *cstat = (struct ctrl_stat *)CTRL_BASE;
/**
* get_board_rev() - setup to pass kernel board revision information
- * returns:(bit[0-3] sub version, higher bit[7-4] is higher version)
+ * returns: 0 for the ATAG REVISION tag value.
*/
-u32 get_board_rev(void)
+u32 __weak get_board_rev(void)
{
- return BOARD_REV_ID;
+ return 0;
}
/**
bool "CompuLab CM-T3530 and CM-T3730 boards"
select SUPPORT_SPL
+config TARGET_CM_T3517
+ bool "CompuLab CM-T3517 boards"
+
config TARGET_DEVKIT8000
bool "TimLL OMAP3 Devkit8000"
select SUPPORT_SPL
source "board/ti/sdp3430/Kconfig"
source "board/ti/beagle/Kconfig"
source "board/compulab/cm_t35/Kconfig"
+source "board/compulab/cm_t3517/Kconfig"
source "board/timll/devkit8000/Kconfig"
source "board/ti/evm/Kconfig"
source "board/isee/igep00x0/Kconfig"
* first stage bootloader. To get ECC to work all memory has
* been initialized by writing any value.
*/
+ /* cppcheck-suppress nullPointer */
memset((void *)0, 0, 1 * 1024 * 1024);
} else {
puts("ECC disabled ");
#include <asm/ti-common/sys_proto.h>
#include <asm/arch/cpu.h>
-#define BOARD_REV_ID 0x0
-
u32 get_cpu_rev(void);
u32 get_sysboot_value(void);
#define KS2_NETCP_PDMA_SCHED_BASE 0x24186100
#define KS2_NETCP_PDMA_RX_FLOW_BASE 0x24189000
#define KS2_NETCP_PDMA_RX_FLOW_NUM 96
-#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001
-#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002
#define KS2_NETCP_PDMA_TX_SND_QUEUE 896
/* NETCP */
#define KS2_NETCP_PDMA_SCHED_BASE 0x02004c00
#define KS2_NETCP_PDMA_RX_FLOW_BASE 0x02005000
#define KS2_NETCP_PDMA_RX_FLOW_NUM 32
-#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001
-#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002
#define KS2_NETCP_PDMA_TX_SND_QUEUE 648
/* NETCP */
/* OSR memory size */
#define KS2_OSR_SIZE 0x100000
+/* SGMII SerDes */
+#define KS2_SGMII_SERDES2_BASE 0x02320000
+#define KS2_LANES_PER_SGMII_SERDES 2
+
/* Number of DSP cores */
#define KS2_NUM_DSPS 4
#define KS2_NETCP_PDMA_RX_FLOW_NUM 96
#define KS2_NETCP_PDMA_TX_SND_QUEUE 896
+/* NETCP */
+#define KS2_NETCP_BASE 0x26000000
+
#endif /* __ASM_ARCH_HARDWARE_K2L_H */
#define KS2_EDMA_QEESR 0x108c
#define KS2_EDMA_PARAM_1(x) (0x4020 + (4 * x))
+/* NETCP pktdma */
+#define KS2_NETCP_PDMA_RX_FREE_QUEUE 4001
+#define KS2_NETCP_PDMA_RX_RCV_QUEUE 4002
+
/* Chip Interrupt Controller */
#define KS2_CIC2_BASE 0x02608000
0 : wfi
ldr \wreg2, [\xreg1, GICC_AIAR]
str \wreg2, [\xreg1, GICC_AEOIR]
- and \wreg2, \wreg2, #3ff
+ and \wreg2, \wreg2, #0x3ff
cbnz \wreg2, 0b
.endm
#endif
--- /dev/null
+/*
+ * arch/arm/include/debug/8250.S
+ *
+ * Copyright (C) 1994-2013 Russell King
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+#include <linux/serial_reg.h>
+
+ .macro addruart, rp, rv, tmp
+ ldr \rp, =CONFIG_DEBUG_UART_PHYS
+ ldr \rv, =CONFIG_DEBUG_UART_VIRT
+ .endm
+
+#ifdef CONFIG_DEBUG_UART_8250_WORD
+ .macro store, rd, rx:vararg
+ str \rd, \rx
+ .endm
+
+ .macro load, rd, rx:vararg
+ ldr \rd, \rx
+ .endm
+#else
+ .macro store, rd, rx:vararg
+ strb \rd, \rx
+ .endm
+
+ .macro load, rd, rx:vararg
+ ldrb \rd, \rx
+ .endm
+#endif
+
+#define UART_SHIFT CONFIG_DEBUG_UART_8250_SHIFT
+
+ .macro senduart,rd,rx
+ store \rd, [\rx, #UART_TX << UART_SHIFT]
+ .endm
+
+ .macro busyuart,rd,rx
+1002: load \rd, [\rx, #UART_LSR << UART_SHIFT]
+ and \rd, \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ teq \rd, #UART_LSR_TEMT | UART_LSR_THRE
+ bne 1002b
+ .endm
+
+ .macro waituart,rd,rx
+#ifdef CONFIG_DEBUG_UART_8250_FLOW_CONTROL
+1001: load \rd, [\rx, #UART_MSR << UART_SHIFT]
+ tst \rd, #UART_MSR_CTS
+ beq 1001b
+#endif
+ .endm
obj-y += cache-cp15.o
endif
+obj-$(CONFIG_DEBUG_LL) += debug.o
+
# For EABI conformant tool chains, provide eabi_compat()
ifneq (,$(findstring -mabi=aapcs-linux,$(PLATFORM_CPPFLAGS)))
extra-y += eabi_compat.o
--- /dev/null
+/*
+ * linux/arch/arm/kernel/debug.S
+ *
+ * Copyright (C) 1994-1999 Russell King
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * 32-bit debugging code
+ */
+#include <linux/linkage.h>
+#include <asm/assembler.h>
+
+ .text
+
+/*
+ * Some debugging routines (useful if you've got MM problems and
+ * printk isn't working). For DEBUGGING ONLY!!! Do not leave
+ * references to these in a production kernel!
+ */
+
+#if !defined(CONFIG_DEBUG_SEMIHOSTING)
+#include CONFIG_DEBUG_LL_INCLUDE
+#endif
+
+#ifdef CONFIG_MMU
+ .macro addruart_current, rx, tmp1, tmp2
+ addruart \tmp1, \tmp2, \rx
+ mrc p15, 0, \rx, c1, c0
+ tst \rx, #1
+ moveq \rx, \tmp1
+ movne \rx, \tmp2
+ .endm
+
+#else /* !CONFIG_MMU */
+ .macro addruart_current, rx, tmp1, tmp2
+ addruart \rx, \tmp1, \tmp2
+ .endm
+
+#endif /* CONFIG_MMU */
+
+/*
+ * Useful debugging routines
+ */
+ENTRY(printhex8)
+ mov r1, #8
+ b printhex
+ENDPROC(printhex8)
+
+ENTRY(printhex4)
+ mov r1, #4
+ b printhex
+ENDPROC(printhex4)
+
+ENTRY(printhex2)
+ mov r1, #2
+printhex: adr r2, hexbuf
+ add r3, r2, r1
+ mov r1, #0
+ strb r1, [r3]
+1: and r1, r0, #15
+ mov r0, r0, lsr #4
+ cmp r1, #10
+ addlt r1, r1, #'0'
+ addge r1, r1, #'a' - 10
+ strb r1, [r3, #-1]!
+ teq r3, r2
+ bne 1b
+ mov r0, r2
+ b printascii
+ENDPROC(printhex2)
+
+hexbuf: .space 16
+
+ .ltorg
+
+#ifndef CONFIG_DEBUG_SEMIHOSTING
+
+ENTRY(printascii)
+ addruart_current r3, r1, r2
+ b 2f
+1: waituart r2, r3
+ senduart r1, r3
+ busyuart r2, r3
+ teq r1, #'\n'
+ moveq r1, #'\r'
+ beq 1b
+2: teq r0, #0
+ ldrneb r1, [r0], #1
+ teqne r1, #0
+ bne 1b
+ mov pc, lr
+ENDPROC(printascii)
+
+ENTRY(printch)
+ addruart_current r3, r1, r2
+ mov r1, r0
+ mov r0, #0
+ b 1b
+ENDPROC(printch)
+
+#ifdef CONFIG_MMU
+ENTRY(debug_ll_addr)
+ addruart r2, r3, ip
+ str r2, [r0]
+ str r3, [r1]
+ mov pc, lr
+ENDPROC(debug_ll_addr)
+#endif
+
+#else
+
+ENTRY(printascii)
+ mov r1, r0
+ mov r0, #0x04 @ SYS_WRITE0
+ ARM( svc #0x123456 )
+ THUMB( svc #0xab )
+ mov pc, lr
+ENDPROC(printascii)
+
+ENTRY(printch)
+ adr r1, hexbuf
+ strb r0, [r1]
+ mov r0, #0x03 @ SYS_WRITEC
+ ARM( svc #0x123456 )
+ THUMB( svc #0xab )
+ mov pc, lr
+ENDPROC(printch)
+
+ENTRY(debug_ll_addr)
+ mov r2, #0
+ str r2, [r0]
+ str r2, [r1]
+ mov pc, lr
+ENDPROC(debug_ll_addr)
+
+#endif
uint32_t *hibernate_magic = 0;
SSYNC();
+ /* cppcheck-suppress nullPointer */
if (hibernate_magic[0] == 0xDEADBEEF) {
serial_putc('c');
bfin_write_EVT15(hibernate_magic[1]);
#define CONFIG_DISPLAY_CPUINFO
#define CONFIG_ARCH_MISC_INIT
+#define CONFIG_CPU CONFIG_BFIN_CPU
+
#endif
setup_ifc_sram = (void *)SRAM_BASE_ADDR;
dst = (u32 *) SRAM_BASE_ADDR;
src = (u32 *) setup_ifc;
- for (i = 0; i < 1024; i++)
+ for (i = 0; i < 1024; i++) {
+ /* cppcheck-suppress nullPointer */
*dst++ = *src++;
+ }
+ /* cppcheck-suppress nullPointer */
setup_ifc_sram();
/* CLEANUP */
#include <common.h>
#include <os.h>
+#include <cli.h>
#include <asm/getopt.h>
#include <asm/io.h>
#include <asm/sections.h>
/* Execute command if required */
if (state->cmd) {
+ cli_init();
+
run_command_list(state->cmd, -1, 0);
if (!state->interactive)
os_exit(state->exit_type);
bootargs = getenv("bootargs");
/* Clear zero page */
+ /* cppcheck-suppress nullPointer */
memset(param, 0, 0x1000);
/* Set commandline */
void board_show_activity (ulong timestamp)
{
#ifdef CONFIG_STATUS_LED
- if ((timestamp % (CONFIG_SYS_HZ / 2) == 0)
+ if ((timestamp % (CONFIG_SYS_HZ / 2)) == 0)
lcd_heartbeat ();
#endif
}
#include <i2c.h>
#include <usb.h>
#include <mmc.h>
-#include <nand.h>
#include <twl4030.h>
-#include <bmp_layout.h>
#include <linux/compiler.h>
#include <asm/io.h>
+#include <asm/errno.h>
#include <asm/arch/mem.h>
#include <asm/arch/mux.h>
#include <asm/arch/mmc_host_def.h>
#include <asm/ehci-omap.h>
#include <asm/gpio.h>
+#include "../common/common.h"
#include "../common/eeprom.h"
DECLARE_GLOBAL_DATA_PTR;
"NAND",
};
-static u32 gpmc_net_config[GPMC_MAX_REG] = {
- NET_GPMC_CONFIG1,
- NET_GPMC_CONFIG2,
- NET_GPMC_CONFIG3,
- NET_GPMC_CONFIG4,
- NET_GPMC_CONFIG5,
- NET_GPMC_CONFIG6,
- 0
-};
-
-#ifdef CONFIG_LCD
-#ifdef CONFIG_CMD_NAND
-static int splash_load_from_nand(u32 bmp_load_addr)
-{
- struct bmp_header *bmp_hdr;
- int res, splash_screen_nand_offset = 0x100000;
- size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
-
- if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
- goto splash_address_too_high;
-
- res = nand_read_skip_bad(&nand_info[nand_curr_device],
- splash_screen_nand_offset, &bmp_header_size,
- NULL, nand_info[nand_curr_device].size,
- (u_char *)bmp_load_addr);
- if (res < 0)
- return res;
-
- bmp_hdr = (struct bmp_header *)bmp_load_addr;
- bmp_size = le32_to_cpu(bmp_hdr->file_size);
-
- if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
- goto splash_address_too_high;
-
- return nand_read_skip_bad(&nand_info[nand_curr_device],
- splash_screen_nand_offset, &bmp_size,
- NULL, nand_info[nand_curr_device].size,
- (u_char *)bmp_load_addr);
-
-splash_address_too_high:
- printf("Error: splashimage address too high. Data overwrites U-Boot "
- "and/or placed beyond DRAM boundaries.\n");
-
- return -1;
-}
-#else
-static inline int splash_load_from_nand(void)
-{
- return -1;
-}
-#endif /* CONFIG_CMD_NAND */
-
#ifdef CONFIG_SPL_BUILD
/*
* Routine: get_board_mem_timings
}
#endif
+#define CM_T35_SPLASH_NAND_OFFSET 0x100000
+
int splash_screen_prepare(void)
{
- char *env_splashimage_value;
- u32 bmp_load_addr;
-
- env_splashimage_value = getenv("splashimage");
- if (env_splashimage_value == NULL)
- return -1;
-
- bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
- if (bmp_load_addr == 0) {
- printf("Error: bad splashimage address specified\n");
- return -1;
- }
-
- return splash_load_from_nand(bmp_load_addr);
+ return cl_splash_screen_prepare(CM_T35_SPLASH_NAND_OFFSET);
}
-#endif /* CONFIG_LCD */
/*
* Routine: board_init
return 0;
}
-static u32 cm_t3x_rev;
-
/*
* Routine: get_board_rev
* Description: read system revision
*/
u32 get_board_rev(void)
{
- if (!cm_t3x_rev)
- cm_t3x_rev = cl_eeprom_get_board_rev();
-
- return cm_t3x_rev;
+ return cl_eeprom_get_board_rev();
};
-/*
- * Routine: misc_init_r
- * Description: display die ID
- */
int misc_init_r(void)
{
- u32 board_rev = get_board_rev();
- u32 rev_major = board_rev / 100;
- u32 rev_minor = board_rev - (rev_major * 100);
-
- if ((rev_minor / 10) * 10 == rev_minor)
- rev_minor = rev_minor / 10;
-
- printf("PCB: %u.%u\n", rev_major, rev_minor);
+ cl_print_pcb_info();
dieid_num_r();
return 0;
}
#endif
-/*
- * Routine: setup_net_chip_gmpc
- * Description: Setting up the configuration GPMC registers specific to the
- * Ethernet hardware.
- */
-static void setup_net_chip_gmpc(void)
-{
- struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
-
- enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[5],
- CM_T3X_SMC911X_BASE, GPMC_SIZE_16M);
- enable_gpmc_cs_config(gpmc_net_config, &gpmc_cfg->cs[4],
- SB_T35_SMC911X_BASE, GPMC_SIZE_16M);
-
- /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
- writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
-
- /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
-
- /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
- writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
- &ctrl_base->gpmc_nadv_ale);
-}
-
#ifdef CONFIG_SYS_I2C_OMAP34XX
/*
* Routine: reset_net_chip
* Description: reset the Ethernet controller via TPS65930 GPIO
*/
-static void reset_net_chip(void)
+static int cm_t3x_reset_net_chip(int gpio)
{
/* Set GPIO1 of TPS65930 as output */
twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x03,
twl4030_i2c_write_u8(TWL4030_CHIP_GPIO, TWL4030_BASEADD_GPIO + 0x0C,
0x02);
mdelay(1);
+ return 0;
}
#else
-static inline void reset_net_chip(void) {}
+static inline int cm_t3x_reset_net_chip(int gpio) { return 0; }
#endif
#ifdef CONFIG_SMC911X
return eth_setenv_enetaddr("ethaddr", enetaddr);
}
-
/*
* Routine: board_eth_init
* Description: initialize module and base-board Ethernet chips
{
int rc = 0, rc1 = 0;
- setup_net_chip_gmpc();
- reset_net_chip();
-
rc1 = handle_mac_address();
if (rc1)
printf("No MAC address found! ");
- rc1 = smc911x_initialize(0, CM_T3X_SMC911X_BASE);
+ rc1 = cl_omap3_smc911x_init(0, 5, CM_T3X_SMC911X_BASE,
+ cm_t3x_reset_net_chip, -EINVAL);
if (rc1 > 0)
rc++;
- rc1 = smc911x_initialize(1, SB_T35_SMC911X_BASE);
+ rc1 = cl_omap3_smc911x_init(1, 4, SB_T35_SMC911X_BASE, NULL, -EINVAL);
if (rc1 > 0)
rc++;
}
#endif
-void __weak get_board_serial(struct tag_serialnr *serialnr)
-{
- /*
- * This corresponds to what happens when we can communicate with the
- * eeprom but don't get a valid board serial value.
- */
- serialnr->low = 0;
- serialnr->high = 0;
-};
-
#ifdef CONFIG_USB_EHCI_OMAP
struct omap_usbhs_board_data usbhs_bdata = {
.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
#define SB_T35_USB_HUB_RESET_GPIO 167
int ehci_hcd_init(int index, enum usb_init_type init,
- struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
{
u8 val;
int offset;
- if (gpio_request(SB_T35_USB_HUB_RESET_GPIO, "SB-T35 usb hub reset")) {
- printf("Error: can't obtain GPIO %d for SB-T35 usb hub reset",
- SB_T35_USB_HUB_RESET_GPIO);
- return -1;
- }
-
- gpio_direction_output(SB_T35_USB_HUB_RESET_GPIO, 0);
- udelay(10);
- gpio_set_value(SB_T35_USB_HUB_RESET_GPIO, 1);
- udelay(1000);
+ cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst");
offset = TWL4030_BASEADD_GPIO + TWL4030_GPIO_GPIODATADIR1;
twl4030_i2c_read_u8(TWL4030_CHIP_GPIO, offset, &val);
int ehci_hcd_stop(void)
{
+ cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO);
return omap_ehci_hcd_stop();
}
#endif /* CONFIG_USB_EHCI_OMAP */
--- /dev/null
+if TARGET_CM_T3517
+
+config SYS_BOARD
+ default "cm_t3517"
+
+config SYS_VENDOR
+ default "compulab"
+
+config SYS_CONFIG_NAME
+ default "cm_t3517"
+
+endif
--- /dev/null
+CM_T3517 BOARD
+M: Igor Grinberg <grinberg@compulab.co.il>
+S: Maintained
+F: board/compulab/cm_t3517/
+F: include/configs/cm_t3517.h
+F: configs/cm_t3517_defconfig
--- /dev/null
+#
+# (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+#
+# Authors: Igor Grinberg <grinberg@compulab.co.il>
+#
+# SPDX-License-Identifier: GPL-2.0+
+#
+
+obj-y += cm_t3517.o mux.o
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <status_led.h>
+#include <net.h>
+#include <netdev.h>
+#include <usb.h>
+#include <mmc.h>
+#include <linux/compiler.h>
+#include <linux/usb/musb.h>
+
+#include <asm/io.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/am35x_def.h>
+#include <asm/arch/mmc_host_def.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/musb.h>
+#include <asm/omap_musb.h>
+#include <asm/ehci-omap.h>
+
+#include "../common/common.h"
+#include "../common/eeprom.h"
+
+DECLARE_GLOBAL_DATA_PTR;
+
+const omap3_sysinfo sysinfo = {
+ DDR_DISCRETE,
+ "CM-T3517 board",
+ "NAND 128/512M",
+};
+
+#ifdef CONFIG_USB_MUSB_AM35X
+static struct musb_hdrc_config cm_t3517_musb_config = {
+ .multipoint = 1,
+ .dyn_fifo = 1,
+ .num_eps = 16,
+ .ram_bits = 12,
+};
+
+static struct omap_musb_board_data cm_t3517_musb_board_data = {
+ .set_phy_power = am35x_musb_phy_power,
+ .clear_irq = am35x_musb_clear_irq,
+ .reset = am35x_musb_reset,
+};
+
+static struct musb_hdrc_platform_data cm_t3517_musb_pdata = {
+#if defined(CONFIG_MUSB_HOST)
+ .mode = MUSB_HOST,
+#elif defined(CONFIG_MUSB_GADGET)
+ .mode = MUSB_PERIPHERAL,
+#else
+#error "Please define either CONFIG_MUSB_HOST or CONFIG_MUSB_GADGET"
+#endif
+ .config = &cm_t3517_musb_config,
+ .power = 250,
+ .platform_ops = &am35x_ops,
+ .board_data = &cm_t3517_musb_board_data,
+};
+
+static void cm_t3517_musb_init(void)
+{
+ /*
+ * Set up USB clock/mode in the DEVCONF2 register.
+ * USB2.0 PHY reference clock is 13 MHz
+ */
+ clrsetbits_le32(&am35x_scm_general_regs->devconf2,
+ CONF2_REFFREQ | CONF2_OTGMODE | CONF2_PHY_GPIOMODE,
+ CONF2_REFFREQ_13MHZ | CONF2_SESENDEN |
+ CONF2_VBDTCTEN | CONF2_DATPOL);
+
+ if (musb_register(&cm_t3517_musb_pdata, &cm_t3517_musb_board_data,
+ (void *)AM35XX_IPSS_USBOTGSS_BASE))
+ printf("Failed initializing AM35x MUSB!\n");
+}
+#else
+static inline void am3517_evm_musb_init(void) {}
+#endif
+
+int board_init(void)
+{
+ gpmc_init(); /* in SRAM or SDRAM, finish GPMC */
+
+ /* boot param addr */
+ gd->bd->bi_boot_params = (OMAP34XX_SDRC_CS0 + 0x100);
+
+#if defined(CONFIG_STATUS_LED) && defined(STATUS_LED_BOOT)
+ status_led_set(STATUS_LED_BOOT, STATUS_LED_ON);
+#endif
+
+ cm_t3517_musb_init();
+
+ return 0;
+}
+
+int misc_init_r(void)
+{
+ cl_print_pcb_info();
+ dieid_num_r();
+
+ return 0;
+}
+
+#if defined(CONFIG_GENERIC_MMC) && !defined(CONFIG_SPL_BUILD)
+#define SB_T35_CD_GPIO 144
+#define SB_T35_WP_GPIO 59
+
+int board_mmc_init(bd_t *bis)
+{
+ return omap_mmc_init(0, 0, 0, SB_T35_CD_GPIO, SB_T35_WP_GPIO);
+}
+#endif
+
+#ifdef CONFIG_DRIVER_TI_EMAC
+#define CONTROL_EFUSE_EMAC_LSB 0x48002380
+#define CONTROL_EFUSE_EMAC_MSB 0x48002384
+
+static int am3517_get_efuse_enetaddr(u8 *enetaddr)
+{
+ u32 lsb = __raw_readl(CONTROL_EFUSE_EMAC_LSB);
+ u32 msb = __raw_readl(CONTROL_EFUSE_EMAC_MSB);
+
+ enetaddr[0] = (u8)((msb >> 16) & 0xff);
+ enetaddr[1] = (u8)((msb >> 8) & 0xff);
+ enetaddr[2] = (u8)(msb & 0xff);
+ enetaddr[3] = (u8)((lsb >> 16) & 0xff);
+ enetaddr[4] = (u8)((lsb >> 8) & 0xff);
+ enetaddr[5] = (u8)(lsb & 0xff);
+
+ return is_valid_ether_addr(enetaddr);
+}
+
+static inline int cm_t3517_init_emac(bd_t *bis)
+{
+ int ret = cpu_eth_init(bis);
+
+ if (ret > 0)
+ return ret;
+
+ printf("Failed initializing EMAC! ");
+ return 0;
+}
+#else /* !CONFIG_DRIVER_TI_EMAC */
+static inline int am3517_get_efuse_enetaddr(u8 *enetaddr) { return 1; }
+static inline int cm_t3517_init_emac(bd_t *bis) { return 0; }
+#endif /* CONFIG_DRIVER_TI_EMAC */
+
+/*
+ * Routine: handle_mac_address
+ * Description: prepare MAC address for on-board Ethernet.
+ */
+static int cm_t3517_handle_mac_address(void)
+{
+ unsigned char enetaddr[6];
+ int ret;
+
+ ret = eth_getenv_enetaddr("ethaddr", enetaddr);
+ if (ret)
+ return 0;
+
+ ret = cl_eeprom_read_mac_addr(enetaddr);
+ if (ret) {
+ ret = am3517_get_efuse_enetaddr(enetaddr);
+ if (ret)
+ return ret;
+ }
+
+ if (!is_valid_ether_addr(enetaddr))
+ return -1;
+
+ return eth_setenv_enetaddr("ethaddr", enetaddr);
+}
+
+#define SB_T35_ETH_RST_GPIO 164
+
+/*
+ * Routine: board_eth_init
+ * Description: initialize module and base-board Ethernet chips
+ */
+int board_eth_init(bd_t *bis)
+{
+ int rc = 0, rc1 = 0;
+
+ rc1 = cm_t3517_handle_mac_address();
+ if (rc1)
+ printf("No MAC address found! ");
+
+ rc1 = cm_t3517_init_emac(bis);
+ if (rc1 > 0)
+ rc++;
+
+ rc1 = cl_omap3_smc911x_init(0, 4, CONFIG_SMC911X_BASE,
+ NULL, SB_T35_ETH_RST_GPIO);
+ if (rc1 > 0)
+ rc++;
+
+ return rc;
+}
+
+#ifdef CONFIG_USB_EHCI_OMAP
+static struct omap_usbhs_board_data cm_t3517_usbhs_bdata = {
+ .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
+ .port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
+};
+
+#define CM_T3517_USB_HUB_RESET_GPIO 152
+#define SB_T35_USB_HUB_RESET_GPIO 98
+
+int ehci_hcd_init(int index, enum usb_init_type init,
+ struct ehci_hccr **hccr, struct ehci_hcor **hcor)
+{
+ cl_usb_hub_init(CM_T3517_USB_HUB_RESET_GPIO, "cm-t3517 hub rst");
+ cl_usb_hub_init(SB_T35_USB_HUB_RESET_GPIO, "sb-t35 hub rst");
+
+ return omap_ehci_hcd_init(index, &cm_t3517_usbhs_bdata, hccr, hcor);
+}
+
+int ehci_hcd_stop(void)
+{
+ cl_usb_hub_deinit(CM_T3517_USB_HUB_RESET_GPIO);
+ cl_usb_hub_deinit(SB_T35_USB_HUB_RESET_GPIO);
+
+ return omap_ehci_hcd_stop();
+}
+#endif /* CONFIG_USB_EHCI_OMAP */
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/arch/mux.h>
+#include <asm/io.h>
+
+void set_muxconf_regs(void)
+{
+ /* SDRC */
+ MUX_VAL(CP(SDRC_D0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D2), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D3), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D4), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D5), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D6), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D7), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D8), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D9), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D10), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D11), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D12), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D13), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D14), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D15), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D16), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D17), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D18), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D19), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D20), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D21), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D22), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D23), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D24), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D25), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D26), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D27), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D28), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D29), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D30), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_D31), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_CLK), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS2), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_DQS3), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(SDRC_CKE0), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(SDRC_CKE1), (IDIS | PTD | DIS | M7));
+
+ /* GPMC */
+ MUX_VAL(CP(GPMC_A1), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A2), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A3), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A4), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A5), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A6), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A7), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A8), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A9), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_A10), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D0), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D1), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D2), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D3), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D4), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D5), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D6), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D7), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D8), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D9), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D10), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D11), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D12), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D13), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D14), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_D15), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(GPMC_NCS0), (IDIS | PTU | EN | M0));
+
+ /* SB-T35 Ethernet */
+ MUX_VAL(CP(GPMC_NCS4), (IEN | PTU | EN | M0));
+ /* DVI enable */
+ MUX_VAL(CP(GPMC_NCS3), (IDIS | PTU | DIS | M4));/*GPIO_54*/
+ /* DataImage backlight */
+ MUX_VAL(CP(GPMC_NCS7), (IDIS | PTU | DIS | M4));/*GPIO_58*/
+
+ /* SB-T35 SD/MMC WP GPIO59 */
+ MUX_VAL(CP(GPMC_CLK), (IEN | PTU | EN | M4)); /*GPIO_59*/
+ MUX_VAL(CP(GPMC_NWE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NOE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NADV_ALE), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_NBE0_CLE), (IDIS | PTU | EN | M0));
+ /* SB-T35 Audio Enable GPIO61 */
+ MUX_VAL(CP(GPMC_NBE1), (IDIS | PTU | EN | M4)); /*GPIO_61*/
+ MUX_VAL(CP(GPMC_NWP), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(GPMC_WAIT0), (IEN | PTU | EN | M0));
+ /* SB-T35 Ethernet IRQ GPIO65 */
+ MUX_VAL(CP(GPMC_WAIT3), (IEN | PTU | EN | M4)); /*GPIO_65*/
+
+ /* UART3 Console */
+ MUX_VAL(CP(UART3_RX_IRRX), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(UART3_TX_IRTX), (IDIS | PTD | DIS | M0));
+ /* RTC V3020 nCS GPIO163 */
+ MUX_VAL(CP(UART3_CTS_RCTX), (IEN | PTU | EN | M4)); /*GPIO_163*/
+ /* SB-T35 Ethernet nRESET GPIO164 */
+ MUX_VAL(CP(UART3_RTS_SD), (IDIS | PTU | EN | M4)); /*GPIO_164*/
+
+ /* SB-T35 SD/MMC CD GPIO144 */
+ MUX_VAL(CP(UART2_CTS), (IEN | PTU | EN | M4)); /*GPIO_144*/
+ /* WIFI nRESET GPIO145 */
+ MUX_VAL(CP(UART2_RTS), (IEN | PTD | EN | M4)); /*GPIO_145*/
+ /* USB1 PHY Reset GPIO 146 */
+ MUX_VAL(CP(UART2_TX), (IEN | PTD | EN | M4)); /*GPIO_146*/
+ /* USB2 PHY Reset GPIO 147 */
+ MUX_VAL(CP(UART2_RX), (IEN | PTD | EN | M4)); /*GPIO_147*/
+
+ /* MMC1 */
+ MUX_VAL(CP(MMC1_CLK), (IDIS | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_CMD), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT0), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT1), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT2), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(MMC1_DAT3), (IEN | PTU | EN | M0));
+
+ /* DSS */
+ MUX_VAL(CP(DSS_PCLK), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_HSYNC), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_VSYNC), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_ACBIAS), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA0), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA1), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA2), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA3), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA4), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA5), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA6), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA7), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA8), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA9), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA10), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA11), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA12), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA13), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA14), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA15), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA16), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA17), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA18), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA19), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA20), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA21), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA22), (IDIS | PTD | DIS | M0));
+ MUX_VAL(CP(DSS_DATA23), (IDIS | PTD | DIS | M0));
+
+ /* I2C */
+ MUX_VAL(CP(I2C1_SCL), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C1_SDA), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C3_SCL), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(I2C3_SDA), (IEN | PTU | EN | M0));
+
+ /* SB-T35 USB HUB Reset GPIO98 */
+ MUX_VAL(CP(CCDC_WEN), (IDIS | PTU | EN | M4)); /*GPIO_98*/
+ /* CM-T3517 USB HUB Reset GPIO152 */
+ MUX_VAL(CP(MCBSP4_CLKX), (IDIS | PTD | DIS | M4)); /*GPIO_152*/
+
+ /* RMII */
+ MUX_VAL(CP(RMII_MDIO_DATA), (IEN | PTU | EN | M0));
+ MUX_VAL(CP(RMII_MDIO_CLK), (M0));
+ MUX_VAL(CP(RMII_RXD0), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_RXD1), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_CRS_DV), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_RXER), (IEN | PTD | DIS | M0));
+ MUX_VAL(CP(RMII_TXD0), (IDIS | M0));
+ MUX_VAL(CP(RMII_TXD1), (IDIS | M0));
+ MUX_VAL(CP(RMII_TXEN), (IDIS | M0));
+ MUX_VAL(CP(RMII_50MHZ_CLK), (IEN | PTU | DIS | M0));
+
+ /* Green LED GPIO186 */
+ MUX_VAL(CP(SYS_CLKOUT2), (IDIS | PTU | DIS | M4)); /*GPIO_186*/
+
+ /* SPI */
+ MUX_VAL(CP(MCBSP1_CLKR), (IEN | PTD | DIS | M1)); /*MCSPI4_CLK*/
+ MUX_VAL(CP(MCBSP1_DX), (IEN | PTD | DIS | M1)); /*MCSPI4_SIMO*/
+ MUX_VAL(CP(MCBSP1_DR), (IEN | PTD | DIS | M1)); /*MCSPI4_SOMI*/
+ MUX_VAL(CP(MCBSP1_FSX), (IEN | PTU | EN | M1)); /*MCSPI4_CS0*/
+ /* LCD reset GPIO157 */
+ MUX_VAL(CP(MCBSP1_FSR), (IDIS | PTU | DIS | M4)); /*GPIO_157*/
+
+ /* RTC V3020 CS Enable GPIO160 */
+ MUX_VAL(CP(MCBSP_CLKS), (IEN | PTD | EN | M4)); /*GPIO_160*/
+ /* SB-T35 LVDS Transmitter SHDN GPIO162 */
+ MUX_VAL(CP(MCBSP1_CLKX), (IEN | PTU | DIS | M4)); /*GPIO_162*/
+
+ /* USB0 - mUSB */
+ MUX_VAL(CP(USB0_DRVBUS), (IEN | PTD | EN | M0));
+ /* USB1 EHCI */
+ MUX_VAL(CP(ETK_D0_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT0*/
+ MUX_VAL(CP(ETK_D1_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT1*/
+ MUX_VAL(CP(ETK_D2_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT2*/
+ MUX_VAL(CP(ETK_D7_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT3*/
+ MUX_VAL(CP(ETK_D4_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT4*/
+ MUX_VAL(CP(ETK_D5_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT5*/
+ MUX_VAL(CP(ETK_D6_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT6*/
+ MUX_VAL(CP(ETK_D3_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DT7*/
+ MUX_VAL(CP(ETK_D8_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_DIR*/
+ MUX_VAL(CP(ETK_D9_ES2), (IEN | PTD | EN | M3)); /*HSUSB1_NXT*/
+ MUX_VAL(CP(ETK_CTL_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB1_CLK*/
+ MUX_VAL(CP(ETK_CLK_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB1_STP*/
+ /* USB2 EHCI */
+ MUX_VAL(CP(ETK_D14_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT0*/
+ MUX_VAL(CP(ETK_D15_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DT1*/
+ MUX_VAL(CP(MCSPI1_CS3), (IEN | PTD | EN | M3)); /*HSUSB2_DT2*/
+ MUX_VAL(CP(MCSPI2_CS1), (IEN | PTD | EN | M3)); /*HSUSB2_DT3*/
+ MUX_VAL(CP(MCSPI2_SIMO), (IEN | PTD | EN | M3)); /*HSUSB2_DT4*/
+ MUX_VAL(CP(MCSPI2_SOMI), (IEN | PTD | EN | M3)); /*HSUSB2_DT5*/
+ MUX_VAL(CP(MCSPI2_CS0), (IEN | PTD | EN | M3)); /*HSUSB2_DT6*/
+ MUX_VAL(CP(MCSPI2_CLK), (IEN | PTD | EN | M3)); /*HSUSB2_DT7*/
+ MUX_VAL(CP(ETK_D12_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_DIR*/
+ MUX_VAL(CP(ETK_D13_ES2), (IEN | PTD | EN | M3)); /*HSUSB2_NXT*/
+ MUX_VAL(CP(ETK_D10_ES2), (IDIS | PTD | DIS | M3)); /*HSUSB2_CLK*/
+ MUX_VAL(CP(ETK_D11_ES2), (IDIS | PTU | DIS | M3)); /*HSUSB2_STP*/
+
+ /* SYS_BOOT */
+ MUX_VAL(CP(SYS_BOOT0), (IEN | PTU | DIS | M4)); /*GPIO_2*/
+ MUX_VAL(CP(SYS_BOOT1), (IEN | PTU | DIS | M4)); /*GPIO_3*/
+ MUX_VAL(CP(SYS_BOOT2), (IEN | PTU | DIS | M4)); /*GPIO_4*/
+ MUX_VAL(CP(SYS_BOOT3), (IEN | PTU | DIS | M4)); /*GPIO_5*/
+ MUX_VAL(CP(SYS_BOOT4), (IEN | PTU | DIS | M4)); /*GPIO_6*/
+ MUX_VAL(CP(SYS_BOOT5), (IEN | PTU | DIS | M4)); /*GPIO_7*/
+}
#define SB_T54_CD_GPIO 228
#define SB_T54_WP_GPIO 229
-int board_mmc_getcd(struct mmc *mmc)
-{
- return !gpio_get_value(SB_T54_CD_GPIO);
-}
-
int board_mmc_init(bd_t *bis)
{
int ret0, ret1;
- ret0 = omap_mmc_init(0, 0, 0, -1, SB_T54_WP_GPIO);
+ ret0 = omap_mmc_init(0, 0, 0, SB_T54_CD_GPIO, SB_T54_WP_GPIO);
if (ret0)
printf("cm_t54: failed to initialize mmc0\n");
# SPDX-License-Identifier: GPL-2.0+
#
-obj-$(CONFIG_SYS_I2C) += eeprom.o
-obj-$(CONFIG_LCD) += omap3_display.o
+obj-y += common.o
+obj-$(CONFIG_SYS_I2C) += eeprom.o
+obj-$(CONFIG_LCD) += omap3_display.o
+obj-$(CONFIG_SPLASH_SCREEN) += splash.o
+obj-$(CONFIG_SMC911X) += omap3_smc911x.o
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <asm/bootm.h>
+#include <asm/gpio.h>
+
+#include "common.h"
+#include "eeprom.h"
+
+void cl_print_pcb_info(void)
+{
+ u32 board_rev = get_board_rev();
+ u32 rev_major = board_rev / 100;
+ u32 rev_minor = board_rev - (rev_major * 100);
+
+ if ((rev_minor / 10) * 10 == rev_minor)
+ rev_minor = rev_minor / 10;
+
+ printf("PCB: %u.%u\n", rev_major, rev_minor);
+}
+
+#ifdef CONFIG_SERIAL_TAG
+void __weak get_board_serial(struct tag_serialnr *serialnr)
+{
+ /*
+ * This corresponds to what happens when we can communicate with the
+ * eeprom but don't get a valid board serial value.
+ */
+ serialnr->low = 0;
+ serialnr->high = 0;
+};
+#endif
+
+#ifdef CONFIG_CMD_USB
+int cl_usb_hub_init(int gpio, const char *label)
+{
+ if (gpio_request(gpio, label)) {
+ printf("Error: can't obtain GPIO%d for %s", gpio, label);
+ return -1;
+ }
+
+ gpio_direction_output(gpio, 0);
+ udelay(10);
+ gpio_set_value(gpio, 1);
+ udelay(1000);
+ return 0;
+}
+
+void cl_usb_hub_deinit(int gpio)
+{
+ gpio_free(gpio);
+}
+#endif
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef _CL_COMMON_
+#define _CL_COMMON_
+
+#include <asm/errno.h>
+
+void cl_print_pcb_info(void);
+
+#ifdef CONFIG_CMD_USB
+int cl_usb_hub_init(int gpio, const char *label);
+void cl_usb_hub_deinit(int gpio);
+#else /* !CONFIG_CMD_USB */
+static inline int cl_usb_hub_init(int gpio, const char *label)
+{
+ return -ENOSYS;
+}
+static inline void cl_usb_hub_deinit(int gpio) {}
+#endif /* CONFIG_CMD_USB */
+
+#ifdef CONFIG_SPLASH_SCREEN
+int cl_splash_screen_prepare(int nand_offset);
+#else /* !CONFIG_SPLASH_SCREEN */
+static inline int cl_splash_screen_prepare(int nand_offset)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_SPLASH_SCREEN */
+
+#ifdef CONFIG_SMC911X
+int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
+ int (*reset)(int), int rst_gpio);
+#else /* !CONFIG_SMC911X */
+static inline int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
+ int (*reset)(int), int rst_gpio)
+{
+ return -ENOSYS;
+}
+#endif /* CONFIG_SMC911X */
+
+#endif /* _CL_COMMON_ */
return cl_eeprom_read(offset, buf, 6);
}
+static u32 board_rev;
+
/*
* Routine: cl_eeprom_get_board_rev
* Description: read system revision from eeprom
*/
u32 cl_eeprom_get_board_rev(void)
{
- u32 rev = 0;
char str[5]; /* Legacy representation can contain at most 4 digits */
uint offset = BOARD_REV_OFFSET_LEGACY;
+ if (board_rev)
+ return board_rev;
+
if (cl_eeprom_setup_layout())
return 0;
if (cl_eeprom_layout != LAYOUT_LEGACY)
offset = BOARD_REV_OFFSET;
- if (cl_eeprom_read(offset, (uchar *)&rev, BOARD_REV_SIZE))
+ if (cl_eeprom_read(offset, (uchar *)&board_rev, BOARD_REV_SIZE))
return 0;
/*
* representation. i.e. for rev 1.00: 0x100 --> 0x64
*/
if (cl_eeprom_layout == LAYOUT_LEGACY) {
- sprintf(str, "%x", rev);
- rev = simple_strtoul(str, NULL, 10);
+ sprintf(str, "%x", board_rev);
+ board_rev = simple_strtoul(str, NULL, 10);
}
- return rev;
+ return board_rev;
};
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <netdev.h>
+
+#include <asm/io.h>
+#include <asm/errno.h>
+#include <asm/arch/cpu.h>
+#include <asm/arch/mem.h>
+#include <asm/arch/sys_proto.h>
+#include <asm/gpio.h>
+
+#include "common.h"
+
+static u32 cl_omap3_smc911x_gpmc_net_config[GPMC_MAX_REG] = {
+ NET_GPMC_CONFIG1,
+ NET_GPMC_CONFIG2,
+ NET_GPMC_CONFIG3,
+ NET_GPMC_CONFIG4,
+ NET_GPMC_CONFIG5,
+ NET_GPMC_CONFIG6,
+ 0
+};
+
+static void cl_omap3_smc911x_setup_net_chip_gmpc(int cs, u32 base_addr)
+{
+ struct ctrl *ctrl_base = (struct ctrl *)OMAP34XX_CTRL_BASE;
+
+ enable_gpmc_cs_config(cl_omap3_smc911x_gpmc_net_config,
+ &gpmc_cfg->cs[cs], base_addr, GPMC_SIZE_16M);
+
+ /* Enable off mode for NWE in PADCONF_GPMC_NWE register */
+ writew(readw(&ctrl_base->gpmc_nwe) | 0x0E00, &ctrl_base->gpmc_nwe);
+
+ /* Enable off mode for NOE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_noe) | 0x0E00, &ctrl_base->gpmc_noe);
+
+ /* Enable off mode for ALE in PADCONF_GPMC_NADV_ALE register */
+ writew(readw(&ctrl_base->gpmc_nadv_ale) | 0x0E00,
+ &ctrl_base->gpmc_nadv_ale);
+}
+
+#ifdef CONFIG_OMAP_GPIO
+static int cl_omap3_smc911x_reset_net_chip(int gpio)
+{
+ int err;
+
+ if (!gpio_is_valid(gpio))
+ return -EINVAL;
+
+ err = gpio_request(gpio, "eth rst");
+ if (err)
+ return err;
+
+ /* Set gpio as output and send a pulse */
+ gpio_direction_output(gpio, 1);
+ udelay(1);
+ gpio_set_value(gpio, 0);
+ mdelay(40);
+ gpio_set_value(gpio, 1);
+ mdelay(1);
+
+ return 0;
+}
+#else /* !CONFIG_OMAP_GPIO */
+static inline int cl_omap3_smc911x_reset_net_chip(int gpio) { return 0; }
+#endif /* CONFIG_OMAP_GPIO */
+
+int cl_omap3_smc911x_init(int id, int cs, u32 base_addr,
+ int (*reset)(int), int rst_gpio)
+{
+ int ret;
+
+ cl_omap3_smc911x_setup_net_chip_gmpc(cs, base_addr);
+
+ if (reset)
+ reset(rst_gpio);
+ else
+ cl_omap3_smc911x_reset_net_chip(rst_gpio);
+
+ ret = smc911x_initialize(id, base_addr);
+ if (ret > 0)
+ return ret;
+
+ printf("Failed initializing SMC911x! ");
+ return 0;
+}
--- /dev/null
+/*
+ * (C) Copyright 2014 CompuLab, Ltd. <www.compulab.co.il>
+ *
+ * Authors: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#include <common.h>
+#include <nand.h>
+#include <bmp_layout.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+#ifdef CONFIG_CMD_NAND
+static int splash_load_from_nand(u32 bmp_load_addr, int nand_offset)
+{
+ struct bmp_header *bmp_hdr;
+ int res;
+ size_t bmp_size, bmp_header_size = sizeof(struct bmp_header);
+
+ if (bmp_load_addr + bmp_header_size >= gd->start_addr_sp)
+ goto splash_address_too_high;
+
+ res = nand_read_skip_bad(&nand_info[nand_curr_device],
+ nand_offset, &bmp_header_size,
+ NULL, nand_info[nand_curr_device].size,
+ (u_char *)bmp_load_addr);
+ if (res < 0)
+ return res;
+
+ bmp_hdr = (struct bmp_header *)bmp_load_addr;
+ bmp_size = le32_to_cpu(bmp_hdr->file_size);
+
+ if (bmp_load_addr + bmp_size >= gd->start_addr_sp)
+ goto splash_address_too_high;
+
+ return nand_read_skip_bad(&nand_info[nand_curr_device],
+ nand_offset, &bmp_size,
+ NULL, nand_info[nand_curr_device].size,
+ (u_char *)bmp_load_addr);
+
+splash_address_too_high:
+ printf("Error: splashimage address too high. Data overwrites U-Boot "
+ "and/or placed beyond DRAM boundaries.\n");
+
+ return -1;
+}
+#else
+static inline int splash_load_from_nand(u32 bmp_load_addr, int nand_offset)
+{
+ return -1;
+}
+#endif /* CONFIG_CMD_NAND */
+
+int cl_splash_screen_prepare(int nand_offset)
+{
+ char *env_splashimage_value;
+ u32 bmp_load_addr;
+
+ env_splashimage_value = getenv("splashimage");
+ if (env_splashimage_value == NULL)
+ return -1;
+
+ bmp_load_addr = simple_strtoul(env_splashimage_value, 0, 16);
+ if (bmp_load_addr == 0) {
+ printf("Error: bad splashimage address specified\n");
+ return -1;
+ }
+
+ return splash_load_from_nand(bmp_load_addr, nand_offset);
+}
{
block_dev_desc_t *stor_dev = NULL;
long sz;
- int i, res, cnt, old_ctrlc;
+ int i, res, old_ctrlc;
char buffer[32];
char str[80];
int n;
clear_ctrlc ();
break;
}
- cnt++;
} while (res < 0);
}
*/
int do_loadpci(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
- unsigned int *ptr = 0;
+ unsigned int *ptr;
int count = 0;
int count2 = 0;
int i;
* Mark sync address
*/
ptr = 0;
+ /* cppcheck-suppress nullPointer */
*ptr = 0xffffffff;
puts("\nWaiting for image from pci host -");
/*
* Wait for host to write the start address
*/
+ /* cppcheck-suppress nullPointer */
while (*ptr == 0xffffffff) {
count++;
if (!(count % 100)) {
testboot = (testpin != 0) && (s);
if (verbose) {
printf("testpin = %d\n", testpin);
+ /* cppcheck-suppress nullPointer */
printf("test_bank = %s\n", s ? s : "not set");
printf("boot test app : %s\n", (testboot) ? "yes" : "no");
}
if (memcmp(&e.mac, "\0\0\0\0\0\0", 6) &&
memcmp(&e.mac, "\xFF\xFF\xFF\xFF\xFF\xFF", 6)) {
- char ethaddr[9];
+ char ethaddr[18];
sprintf(ethaddr, "%02X:%02X:%02X:%02X:%02X:%02X",
e.mac[0],
FLASH_BUS *addr = (FLASH_BUS *) 0;
+ /* cppcheck-suppress nullPointer */
*addr = FLASH_CMD (CFI_INTEL_CMD_READ_STATUS_REGISTER);
+ /* cppcheck-suppress nullPointer */
return *addr;
}
#endif /* #ifdef CONFIG_FACTORYSET */
/* Set rgmii mode and enable rmii clock to be sourced from chip */
- writel(RGMII_MODE_ENABLE , &cdev->miisel);
+ writel(RGMII_MODE_ENABLE | RGMII_INT_DELAY, &cdev->miisel);
rv = cpsw_register(&cpsw_data);
if (rv < 0)
board you may want something other than UART0 as for example the IDK
uses UART3 so enter 4 here.
+config NOR
+ bool "Support for NOR flash"
+ help
+ The AM335x SoC supports having a NOR flash connected to the GPMC.
+ In practice this is seen as a NOR flash module connected to the
+ "memory cape" for the BeagleBone family.
+
+config NOR_BOOT
+ bool "Support for booting from NOR flash"
+ depends on NOR
+ help
+ Enabling this will make a U-Boot binary that is capable of being
+ booted via NOR. In this case we will enable certain pinmux early
+ as the ROM only partially sets up pinmux. We also default to using
+ NOR for environment.
endif
Author: Murali Karicheri <m-karicheri2@ti.com>
-This README has information on the u-boot port for K2HK, K2E boards.
+This README has information on the u-boot port for K2HK, K2E, and K2L EVM boards.
Documentation for this board can be found at
http://www.advantech.com/Support/TI-EVM/EVMK2HX_sd.aspx
https://www.einfochips.com/index.php/partnerships/texas-instruments/k2e-evm.html
+https://www.einfochips.com/index.php/partnerships/texas-instruments/k2l-evm.html
The K2HK board is based on Texas Instruments Keystone2 family of SoCs: K2H, K2K.
More details on these SoCs are available at company websites
K2H: http://www.ti.com/product/tci6638k2h
The K2E SoC details are available at
- K2E http://www.ti.com/lit/ds/symlink/66ak2e05.pdf
+ http://www.ti.com/lit/ds/symlink/66ak2e05.pdf
+
+The K2L SoC details are available at
+ http://www.ti.com/lit/ds/symlink/tci6630k2l.pdf
Board configuration:
====================
+------+-------+-------+-----------+-----------+-------+-------+----+
|K2HK |2 |512MB |6MB |4(2) |2 |3 |3 |
|K2E |4 |512MB |2MB |8(2) |2 |3 |3 |
+|K2L |2 |512MB |2MB |4(2) |4 |3 |3 |
+------+-------+-------+-----------+-----------+-------+-------+----+
There are only 2 eth port installed on the boards.
Board configuration files:
include/configs/k2hk_evm.h
include/configs/k2e_evm.h
+include/configs/k2l_evm.h
+include/configs/k2l_evm.h
As u-boot is migrating to Kconfig there is also board defconfig files
configs/k2e_evm_defconfig
configs/k2hk_evm_defconfig
+configs/k2l_evm_defconfig
Supported boot modes:
- SPI NOR boot
Build instructions:
===================
-Examples for k2hk, for k2e just replace k2hk prefix accordingly.
+Examples for k2hk, for k2e and k2l just replace k2hk prefix accordingly.
Don't forget to add ARCH=arm and CROSS_COMPILE.
To build u-boot.bin
on EVM. Follow instructions at
K2HK http://processors.wiki.ti.com/index.php/EVMK2H_Hardware_Setup
K2E http://processors.wiki.ti.com/index.php/EVMK2E_Hardware_Setup
+K2L http://processors.wiki.ti.com/index.php/TCIEVMK2L_Hardware_Setup
+
to configure SW1 dip switch to use "No Boot/JTAG DSP Little Endian Boot Mode"
and Power ON the EVM. Follow instructions to connect serial port of EVM to
PC and start TeraTerm or Hyper Terminal.
2. Suspend Target. Select Run -> Suspend from top level menu
CortexA15_1 (Free Running)"
3. Load u-boot-spi.gph binary from build folder on to DDR address 0x87000000
- through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E EVM
- using CCS", but using address 0x87000000.
+ through CCS as described in step 2 of "Load and Run U-Boot on K2HK/K2E/K2L
+ EVM using CCS", but using address 0x87000000.
4. Free Run the target as described earlier (step 4) to get u-boot prompt
5. At the U-Boot console type following to setup u-boot environment variables.
setenv addr_uboot 0x87000000
int nbanks;
u64 size[2];
u64 start[2];
- char name[32];
int nodeoffset;
u32 ddr3a_size;
int unitrd_fixup = 0;
}
/* reserve memory at start of bank */
- sprintf(name, "mem_reserve_head");
- env = getenv(name);
+ env = getenv("mem_reserve_head");
if (env) {
start[0] += ustrtoul(env, &endp, 0);
size[0] -= ustrtoul(env, &endp, 0);
}
- sprintf(name, "mem_reserve");
- env = getenv(name);
+ env = getenv("mem_reserve");
if (env)
size[0] -= ustrtoul(env, &endp, 0);
#include <common.h>
#include <asm/arch/ddr3.h>
#include <asm/arch/hardware.h>
-#include <asm/ti-common/ti-aemif.h>
+#include <asm/ti-common/keystone_net.h>
DECLARE_GLOBAL_DATA_PTR;
static struct pll_init_data pa_pll_config =
PASS_PLL_983;
+#ifdef CONFIG_DRIVER_TI_KEYSTONE_NET
+struct eth_priv_t eth_priv_cfg[] = {
+ {
+ .int_name = "K2L_EMAC",
+ .rx_flow = 0,
+ .phy_addr = 0,
+ .slave_port = 1,
+ .sgmii_link_type = SGMII_LINK_MAC_PHY,
+ },
+ {
+ .int_name = "K2L_EMAC1",
+ .rx_flow = 8,
+ .phy_addr = 1,
+ .slave_port = 2,
+ .sgmii_link_type = SGMII_LINK_MAC_PHY,
+ },
+ {
+ .int_name = "K2L_EMAC2",
+ .rx_flow = 16,
+ .phy_addr = 2,
+ .slave_port = 3,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+ {
+ .int_name = "K2L_EMAC3",
+ .rx_flow = 32,
+ .phy_addr = 3,
+ .slave_port = 4,
+ .sgmii_link_type = SGMII_LINK_MAC_MAC_FORCED,
+ },
+};
+
+int get_num_eth_ports(void)
+{
+ return sizeof(eth_priv_cfg) / sizeof(struct eth_priv_t);
+}
+#endif
+
#ifdef CONFIG_BOARD_EARLY_INIT_F
int board_early_init_f(void)
{
o_string temp=NULL_O_STRING;
int rcode;
#ifdef __U_BOOT__
- int code = 0;
+ int code = 1;
#endif
do {
ctx.type = flag;
}
b_free(&temp);
/* loop on syntax errors, return on EOF */
- } while (rcode != -1 && !(flag & FLAG_EXIT_FROM_LOOP) &&
+ } while (rcode != 1 && !(flag & FLAG_EXIT_FROM_LOOP) &&
(inp->peek != static_peek || b_peek(inp)));
#ifndef __U_BOOT__
return 0;
#ifdef __U_BOOT__
char *p = NULL;
int rcode;
- if ( !s || !*s)
+ if (!s)
return 1;
+ if (!*s)
+ return 0;
if (!(p = strchr(s, '\n')) || *++p) {
p = xmalloc(strlen(s) + 2);
strcpy(p, s);
-de <net.h>
-
-#if !defined(CONFIG_UPDATE_TFTP)
-#error "CONFIG_UPDATE_TFTP required"
-#endif
-
-static int do_fitupd(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
-{
- ulong addr = 0Un the root directory of the source tree for details.
+/*
+ * (C) Copyright 2011
+ * Andreas Pretzsch, carpe noctem engineering, apr@cn-eng.de
+ *
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
INTERNAL_SIZE_T nb;
#ifdef CONFIG_SYS_MALLOC_F_LEN
- if (!(gd->flags & GD_FLG_RELOC)) {
+ if (gd && !(gd->flags & GD_FLG_RELOC)) {
ulong new_ptr;
void *ptr;
}
} else {
debug("## No Flattened Device Tree\n");
- return 0;
+ goto error;
}
} else {
debug("## No Flattened Device Tree\n");
- return 0;
+ goto error;
}
*of_flat_tree = fdt_blob;
CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="NAND,NOR"
+CONFIG_SYS_EXTRA_OPTIONS="NAND"
CONFIG_CONS_INDEX=1
+S:CONFIG_ARM=y
+S:CONFIG_TARGET_AM335X_EVM=y
+CONFIG_NOR=y
-CONFIG_SYS_EXTRA_OPTIONS="NOR,NOR_BOOT"
CONFIG_CONS_INDEX=1
CONFIG_ARM=y
CONFIG_TARGET_AM335X_EVM=y
+CONFIG_NOR=y
+CONFIG_NOR_BOOT=y
--- /dev/null
+CONFIG_SPL=n
++S:CONFIG_ARM=y
++S:CONFIG_OMAP34XX=y
++S:CONFIG_TARGET_CM_T3517=y
image that can be flashed on the board NAND/SPI flash. The make target
which uses mkimage to produce such an image is "u-boot.kwb". For example:
- export BUILD_DIR=/tmp/build
+ export KBUILD_OUTPUT=/tmp/build
make distclean
make yourboard_config
- make $BUILD_DIR/u-boot.kwb
+ make u-boot.kwb
Board specific configuration file specifications:
{
u32 j;
- if (qm_cfg == NULL)
- return;
-
queue_close(qm_cfg->qpool_num);
qm_cfg->mngr_cfg->link_ram_base0 = 0;
{
u32 regd;
- if (!qm_cfg)
- return;
-
cpu_to_bus((u32 *)hd, sizeof(struct qm_host_desc)/4);
regd = (u32)hd | ((sizeof(struct qm_host_desc) >> 4) - 1);
writel(regd, &qm_cfg->queue[qnum].ptr_size_thresh);
{
u32 uhd;
- if (!qm_cfg)
- return NULL;
-
uhd = readl(&qm_cfg->queue[qnum].ptr_size_thresh) & ~0xf;
if (uhd)
cpu_to_bus((u32 *)uhd, sizeof(struct qm_host_desc)/4);
struct qm_host_desc *qm_pop_from_free_pool(void)
{
- if (!qm_cfg)
- return NULL;
-
return qm_pop(qm_cfg->qpool_num);
}
# SPDX-License-Identifier: GPL-2.0+
#
+obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o
+obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o
obj-$(CONFIG_BFIN_SDH) += bfin_sdh.o
obj-$(CONFIG_DAVINCI_MMC) += davinci_mmc.o
+obj-$(CONFIG_DWMMC) += dw_mmc.o
+obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
obj-$(CONFIG_FSL_ESDHC) += fsl_esdhc.o
obj-$(CONFIG_FTSDC010) += ftsdc010_mci.o
obj-$(CONFIG_FTSDC021) += ftsdc021_sdhci.o
obj-$(CONFIG_GENERIC_MMC) += mmc.o
obj-$(CONFIG_GENERIC_ATMEL_MCI) += gen_atmel_mci.o
+obj-$(CONFIG_KONA_SDHCI) += kona_sdhci.o
obj-$(CONFIG_MMC_SPI) += mmc_spi.o
-obj-$(CONFIG_ARM_PL180_MMCI) += arm_pl180_mmci.o
+obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
obj-$(CONFIG_MV_SDHCI) += mv_sdhci.o
+obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o
obj-$(CONFIG_MXC_MMC) += mxcmmc.o
obj-$(CONFIG_MXS_MMC) += mxsmmc.o
obj-$(CONFIG_OMAP_HSMMC) += omap_hsmmc.o
obj-$(CONFIG_PXA_MMC_GENERIC) += pxa_mmc_gen.o
-obj-$(CONFIG_SDHCI) += sdhci.o
-obj-$(CONFIG_BCM2835_SDHCI) += bcm2835_sdhci.o
-obj-$(CONFIG_KONA_SDHCI) += kona_sdhci.o
+obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
obj-$(CONFIG_S3C_SDI) += s3c_sdi.o
obj-$(CONFIG_S5P_SDHCI) += s5p_sdhci.o
+obj-$(CONFIG_SDHCI) += sdhci.o
obj-$(CONFIG_SH_MMCIF) += sh_mmcif.o
+obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
obj-$(CONFIG_SPEAR_SDHCI) += spear_sdhci.o
obj-$(CONFIG_TEGRA_MMC) += tegra_mmc.o
-obj-$(CONFIG_DWMMC) += dw_mmc.o
-obj-$(CONFIG_EXYNOS_DWMMC) += exynos_dw_mmc.o
-obj-$(CONFIG_MMC_SUNXI) += sunxi_mmc.o
obj-$(CONFIG_ZYNQ_SDHCI) += zynq_sdhci.o
-obj-$(CONFIG_SOCFPGA_DWMMC) += socfpga_dw_mmc.o
-obj-$(CONFIG_SUPPORT_EMMC_RPMB) += rpmb.o
+
ifdef CONFIG_SPL_BUILD
obj-$(CONFIG_SPL_MMC_BOOT) += fsl_esdhc_spl.o
else
obj-$(CONFIG_GENERIC_MMC) += mmc_write.o
endif
-obj-$(CONFIG_MVEBU_MMC) += mvebu_mmc.o
+
if (cd_gpio < 0)
return 1;
- return gpio_get_value(cd_gpio);
+ /* NOTE: assumes card detect signal is active-low */
+ return !gpio_get_value(cd_gpio);
}
static int omap_hsmmc_getwp(struct mmc *mmc)
if (wp_gpio < 0)
return 0;
+ /* NOTE: assumes write protect signal is active-high */
return gpio_get_value(wp_gpio);
}
#endif
writel(cfg->max_rx_len, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_MAXLEN);
writel(cfg->ctl, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_CTL);
-#ifdef CONFIG_K2E_EVM
+#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L)
/* Map RX packet flow priority to 0 */
writel(0, DEVICE_EMACSL_BASE(port) + CPGMACSL_REG_RX_PRI_MAP);
#endif
keystone2_net_serdes_setup();
+ if (sys_has_mdio)
+ keystone2_mdio_reset(mdio_bus);
+
keystone_sgmii_config(phy_dev, eth_priv->slave_port - 1,
eth_priv->sgmii_link_type);
&ks2_serdes_sgmii_156p25mhz,
CONFIG_KSNET_SERDES_LANES_PER_SGMII);
-#ifdef CONFIG_SOC_K2E
+#if defined(CONFIG_SOC_K2E) || defined(CONFIG_SOC_K2L)
ks2_serdes_init(CONFIG_KSNET_SERDES_SGMII2_BASE,
&ks2_serdes_sgmii_156p25mhz,
CONFIG_KSNET_SERDES_LANES_PER_SGMII);
return 0;
}
+/**
+ * m88e1518_phy_writebits - write bits to a register
+ */
+void m88e1518_phy_writebits(struct phy_device *phydev,
+ u8 reg_num, u16 offset, u16 len, u16 data)
+{
+ u16 reg, mask;
+
+ if ((len + offset) >= 16)
+ mask = 0 - (1 << offset);
+ else
+ mask = (1 << (len + offset)) - (1 << offset);
+
+ reg = phy_read(phydev, MDIO_DEVAD_NONE, reg_num);
+
+ reg &= ~mask;
+ reg |= data << offset;
+
+ phy_write(phydev, MDIO_DEVAD_NONE, reg_num, reg);
+}
+
+static int m88e1518_config(struct phy_device *phydev)
+{
+ /*
+ * As per Marvell Release Notes - Alaska 88E1510/88E1518/88E1512
+ * /88E1514 Rev A0, Errata Section 3.1
+ */
+ if (phydev->interface == PHY_INTERFACE_MODE_SGMII) {
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x00ff); /* page 0xff */
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x214B);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2144);
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0x0C28);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2146);
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xB233);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x214D);
+ phy_write(phydev, MDIO_DEVAD_NONE, 17, 0xCC0C);
+ phy_write(phydev, MDIO_DEVAD_NONE, 16, 0x2159);
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0x0000); /* reg page 0 */
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 18); /* reg page 18 */
+ /* Write HWCFG_MODE = SGMII to Copper */
+ m88e1518_phy_writebits(phydev, 20, 0, 3, 1);
+
+ /* Phy reset */
+ m88e1518_phy_writebits(phydev, 20, 15, 1, 1);
+ phy_write(phydev, MDIO_DEVAD_NONE, 22, 0); /* reg page 18 */
+ udelay(100);
+ }
+
+ return m88e1111s_config(phydev);
+}
+
/* Marvell 88E1118 */
static int m88e1118_config(struct phy_device *phydev)
{
.uid = 0x1410dd1,
.mask = 0xffffff0,
.features = PHY_GBIT_FEATURES,
- .config = &m88e1111s_config,
+ .config = &m88e1518_config,
.startup = &m88e1011s_startup,
.shutdown = &genphy_shutdown,
};
static void smc911x_halt(struct eth_device *dev)
{
smc911x_reset(dev);
+ smc911x_handle_mac_address(dev);
}
static int smc911x_rx(struct eth_device *dev)
rdes0 = le32_to_cpu(rxptr->rdes0);
#ifdef RX_DEBUG
- printf("%s(): rxptr->rdes0=%x:%x\n", __FUNCTION__, rxptr->rdes0);
+ printf("%s(): rxptr->rdes0=%x\n", __FUNCTION__, rxptr->rdes0);
#endif
if (!(rdes0 & 0x80000000)) { /* packet owner check */
if ((rdes0 & 0x300) != 0x300) {
static struct spi_slave *slave;
-void pmic_spi_free(struct spi_slave *slave)
-{
- if (slave)
- spi_free_slave(slave);
-}
-
-struct spi_slave *pmic_spi_probe(struct pmic *p)
-{
- return spi_setup_slave(p->bus,
- p->hw.spi.cs,
- p->hw.spi.clk,
- p->hw.spi.mode);
-}
-
static u32 pmic_reg(struct pmic *p, u32 reg, u32 *val, u32 write)
{
u32 pmic_tx, pmic_rx;
u32 tmp;
if (!slave) {
- slave = pmic_spi_probe(p);
+ slave = spi_setup_slave(p->bus, p->hw.spi.cs, p->hw.spi.clk,
+ p->hw.spi.mode);
if (!slave)
return -1;
tmp = cpu_to_be32(pmic_tx);
if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
- pmic_spi_flags)) {
- spi_release_bus(slave);
- return -1;
- }
+ pmic_spi_flags))
+ goto err;
if (write) {
pmic_tx = p->hw.spi.prepare_tx(reg, val, 0);
tmp = cpu_to_be32(pmic_tx);
if (spi_xfer(slave, pmic_spi_bitlen, &tmp, &pmic_rx,
- pmic_spi_flags)) {
- spi_release_bus(slave);
- return -1;
- }
+ pmic_spi_flags))
+ goto err;
}
spi_release_bus(slave);
*val = cpu_to_be32(pmic_rx);
return 0;
+
+err:
+ spi_release_bus(slave);
+ return -1;
}
int pmic_reg_write(struct pmic *p, u32 reg, u32 val)
uint64_t crc = salt;
if (table[128] == 0) {
- uint64_t *ct;
+ uint64_t *ct = NULL;
int i, j;
for (i = 0; i < 256; i++) {
for (ct = table + i, *ct = i, j = 8; j > 0; j--)
}
printf("unknown ZAP type\n");
+ free(zapbuf);
return ZFS_ERR_BAD_FS;
}
return ret;
}
printf("unknown ZAP type\n");
+ free(zapbuf);
return 0;
}
ubbest = malloc(sizeof(*ubbest));
if (!ubbest) {
+ free(ub_array);
zfs_unmount(data);
return 0;
}
if (err) {
printf("couldn't zio_read object directory\n");
zfs_unmount(data);
+ free(osp);
free(ubbest);
return 0;
}
hdrsize = SA_HDR_SIZE(((sa_hdr_phys_t *) sahdrp));
file->size = *(uint64_t *) ((char *) sahdrp + hdrsize + SA_SIZE_OFFSET);
+ if ((data->dnode.dn.dn_bonuslen == 0) &&
+ (data->dnode.dn.dn_flags & DNODE_FLAG_SPILL_BLKPTR))
+ free(sahdrp);
} else {
file->size = zfs_to_cpu64(((znode_phys_t *) DN_BONUS(&data->dnode.dn))->zp_size, data->dnode.endian);
}
#define CONFIG_AM335X_USB1
#define CONFIG_AM335X_USB1_MODE MUSB_HOST
+#ifndef CONFIG_SPL_USBETH_SUPPORT
+/* Fastboot */
+#define CONFIG_CMD_FASTBOOT
+#define CONFIG_ANDROID_BOOT_IMAGE
+#define CONFIG_USB_FASTBOOT_BUF_ADDR CONFIG_SYS_LOAD_ADDR
+#define CONFIG_USB_FASTBOOT_BUF_SIZE 0x07000000
+
+/* To support eMMC booting */
+#define CONFIG_STORAGE_EMMC
+#define CONFIG_FASTBOOT_FLASH_MMC_DEV 1
+#endif
+
#ifdef CONFIG_MUSB_HOST
#define CONFIG_CMD_USB
#define CONFIG_USB_STORAGE
#define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
/* USB TI's IDs */
-#define CONFIG_G_DNL_VENDOR_NUM 0x0403
-#define CONFIG_G_DNL_PRODUCT_NUM 0xBD00
+#define CONFIG_G_DNL_VENDOR_NUM 0x0451
+#define CONFIG_G_DNL_PRODUCT_NUM 0xD022
#define CONFIG_G_DNL_MANUFACTURER "Texas Instruments"
#endif /* CONFIG_MUSB_GADGET */
# define CONFIG_CMD_FAT
# define CONFIG_CMD_MMC
# define CONFIG_DOS_PARTITION
+# define CONFIG_SYS_MMC_MAX_BLK_COUNT 127
# endif
# ifdef CONFIG_MMC_SPI
# define CONFIG_CMD_MMC_SPI
--- /dev/null
+/*
+ * (C) Copyright 2013 CompuLab, Ltd.
+ * Author: Igor Grinberg <grinberg@compulab.co.il>
+ *
+ * Configuration settings for the CompuLab CM-T3517 board
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+/*
+ * High Level Configuration Options
+ */
+#define CONFIG_OMAP /* in a TI OMAP core */
+#define CONFIG_CM_T3517 /* working with CM-T3517 */
+#define CONFIG_OMAP_COMMON
+#define CONFIG_SYS_GENERIC_BOARD
+
+#define CONFIG_SYS_TEXT_BASE 0x80008000
+
+/*
+ * This is needed for the DMA stuff.
+ * Although the default iss 64, we still define it
+ * to be on the safe side once the default is changed.
+ */
+#define CONFIG_SYS_CACHELINE_SIZE 64
+
+#define CONFIG_EMIF4 /* The chip has EMIF4 controller */
+
+#include <asm/arch/cpu.h> /* get chip and board defs */
+#include <asm/arch/omap3.h>
+
+/*
+ * Display CPU and Board information
+ */
+#define CONFIG_DISPLAY_CPUINFO
+#define CONFIG_DISPLAY_BOARDINFO
+
+/* Clock Defines */
+#define V_OSCK 26000000 /* Clock output from T2 */
+#define V_SCLK (V_OSCK >> 1)
+
+#define CONFIG_MISC_INIT_R
+
+#define CONFIG_OF_LIBFDT
+/*
+ * The early kernel mapping on ARM currently only maps from the base of DRAM
+ * to the end of the kernel image. The kernel is loaded at DRAM base + 0x8000.
+ * The early kernel pagetable uses DRAM base + 0x4000 to DRAM base + 0x8000,
+ * so that leaves DRAM base to DRAM base + 0x4000 available.
+ */
+#define CONFIG_SYS_BOOTMAPSZ 0x4000
+
+#define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
+#define CONFIG_SETUP_MEMORY_TAGS
+#define CONFIG_INITRD_TAG
+#define CONFIG_REVISION_TAG
+#define CONFIG_SERIAL_TAG
+
+/*
+ * Size of malloc() pool
+ */
+#define CONFIG_ENV_SIZE (16 << 10) /* 16 KiB */
+#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + (128 << 10))
+
+/*
+ * Hardware drivers
+ */
+
+/*
+ * NS16550 Configuration
+ */
+#define CONFIG_SYS_NS16550
+#define CONFIG_SYS_NS16550_SERIAL
+#define CONFIG_SYS_NS16550_REG_SIZE (-4)
+#define CONFIG_SYS_NS16550_CLK 48000000 /* 48MHz (APLL96/2) */
+
+/*
+ * select serial console configuration
+ */
+#define CONFIG_CONS_INDEX 3
+#define CONFIG_SYS_NS16550_COM3 OMAP34XX_UART3
+#define CONFIG_SERIAL3 3 /* UART3 */
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+#define CONFIG_BAUDRATE 115200
+#define CONFIG_SYS_BAUDRATE_TABLE {4800, 9600, 19200, 38400, 57600,\
+ 115200}
+
+#define CONFIG_OMAP_GPIO
+
+#define CONFIG_GENERIC_MMC
+#define CONFIG_MMC
+#define CONFIG_OMAP_HSMMC
+#define CONFIG_DOS_PARTITION
+
+/* USB */
+#define CONFIG_USB_MUSB_AM35X
+
+#ifndef CONFIG_USB_MUSB_AM35X
+#define CONFIG_USB_OMAP3
+#define CONFIG_USB_EHCI
+#define CONFIG_USB_EHCI_OMAP
+#define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO 146
+#define CONFIG_OMAP_EHCI_PHY2_RESET_GPIO 147
+#else /* !CONFIG_USB_MUSB_AM35X */
+#define CONFIG_MUSB_HOST
+#define CONFIG_MUSB_PIO_ONLY
+#endif /* CONFIG_USB_MUSB_AM35X */
+
+#define CONFIG_USB_STORAGE
+#define CONFIG_CMD_USB
+
+/* commands to include */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_CACHE
+#define CONFIG_CMD_EXT2 /* EXT2 Support */
+#define CONFIG_CMD_FAT /* FAT support */
+#define CONFIG_CMD_MTDPARTS /* Enable MTD parts commands */
+#define CONFIG_MTD_DEVICE /* needed for mtdparts commands */
+#define CONFIG_MTD_PARTITIONS
+#define MTDIDS_DEFAULT "nand0=nand"
+#define MTDPARTS_DEFAULT "mtdparts=nand:512k(x-loader),"\
+ "1920k(u-boot),256k(u-boot-env),"\
+ "4m(kernel),-(fs)"
+
+#define CONFIG_CMD_I2C /* I2C serial bus support */
+#define CONFIG_CMD_MMC /* MMC support */
+#define CONFIG_CMD_NAND /* NAND support */
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_GPIO
+
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMLS /* List all found images */
+
+#define CONFIG_SYS_NO_FLASH
+#define CONFIG_SYS_I2C
+#define CONFIG_SYS_OMAP24_I2C_SPEED 400000
+#define CONFIG_SYS_OMAP24_I2C_SLAVE 1
+#define CONFIG_SYS_I2C_OMAP34XX
+#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50
+#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 1
+#define CONFIG_SYS_I2C_EEPROM_BUS 0
+#define CONFIG_I2C_MULTI_BUS
+
+/*
+ * Board NAND Info.
+ */
+#define CONFIG_SYS_NAND_QUIET_TEST
+#define CONFIG_NAND_OMAP_GPMC
+#define CONFIG_SYS_NAND_ADDR NAND_BASE /* physical address */
+ /* to access nand */
+#define CONFIG_SYS_NAND_BASE NAND_BASE /* physical address */
+ /* to access nand at */
+ /* CS0 */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND */
+ /* devices */
+
+/* Environment information */
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+
+#define CONFIG_EXTRA_ENV_SETTINGS \
+ "loadaddr=0x82000000\0" \
+ "baudrate=115200\0" \
+ "console=ttyO2,115200n8\0" \
+ "mpurate=auto\0" \
+ "vram=12M\0" \
+ "dvimode=1024x768MR-16@60\0" \
+ "defaultdisplay=dvi\0" \
+ "mmcdev=0\0" \
+ "mmcroot=/dev/mmcblk0p2 rw rootwait\0" \
+ "mmcrootfstype=ext4\0" \
+ "nandroot=/dev/mtdblock4 rw\0" \
+ "nandrootfstype=ubifs\0" \
+ "mmcargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "vram=${vram} " \
+ "omapfb.mode=dvi:${dvimode} " \
+ "omapdss.def_disp=${defaultdisplay} " \
+ "root=${mmcroot} " \
+ "rootfstype=${mmcrootfstype}\0" \
+ "nandargs=setenv bootargs console=${console} " \
+ "mpurate=${mpurate} " \
+ "vram=${vram} " \
+ "omapfb.mode=dvi:${dvimode} " \
+ "omapdss.def_disp=${defaultdisplay} " \
+ "root=${nandroot} " \
+ "rootfstype=${nandrootfstype}\0" \
+ "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
+ "bootscript=echo Running bootscript from mmc ...; " \
+ "source ${loadaddr}\0" \
+ "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
+ "mmcboot=echo Booting from mmc ...; " \
+ "run mmcargs; " \
+ "bootm ${loadaddr}\0" \
+ "nandboot=echo Booting from nand ...; " \
+ "run nandargs; " \
+ "nand read ${loadaddr} 2a0000 400000; " \
+ "bootm ${loadaddr}\0" \
+
+#define CONFIG_CMD_BOOTZ
+#define CONFIG_BOOTCOMMAND \
+ "mmc dev ${mmcdev}; if mmc rescan; then " \
+ "if run loadbootscript; then " \
+ "run bootscript; " \
+ "else " \
+ "if run loaduimage; then " \
+ "run mmcboot; " \
+ "else run nandboot; " \
+ "fi; " \
+ "fi; " \
+ "else run nandboot; fi"
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_AUTO_COMPLETE
+#define CONFIG_CMDLINE_EDITING
+#define CONFIG_TIMESTAMP
+#define CONFIG_SYS_AUTOLOAD "no"
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */
+#define CONFIG_SYS_PROMPT "CM-T3517 # "
+#define CONFIG_SYS_CBSIZE 512 /* Console I/O Buffer Size */
+/* Print Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + \
+ sizeof(CONFIG_SYS_PROMPT) + 16)
+#define CONFIG_SYS_MAXARGS 32 /* max number of command args */
+/* Boot Argument Buffer Size */
+#define CONFIG_SYS_BARGSIZE (CONFIG_SYS_CBSIZE)
+
+#define CONFIG_SYS_LOAD_ADDR (OMAP34XX_SDRC_CS0 + 0x02000000)
+
+/*
+ * AM3517 has 12 GP timers, they can be driven by the system clock
+ * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
+ * This rate is divided by a local divisor.
+ */
+#define CONFIG_SYS_TIMERBASE (OMAP34XX_GPT2)
+#define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
+#define CONFIG_SYS_HZ 1000
+
+/*-----------------------------------------------------------------------
+ * Physical Memory Map
+ */
+#define CONFIG_NR_DRAM_BANKS 1 /* CM-T3517 DRAM is only on CS0 */
+#define PHYS_SDRAM_1 OMAP34XX_SDRC_CS0
+#define CONFIG_SYS_CS0_SIZE (256 << 20)
+
+/*-----------------------------------------------------------------------
+ * FLASH and environment organization
+ */
+
+/* **** PISMO SUPPORT *** */
+/* Monitor at start of flash */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE
+#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 2 sectors */
+
+#define CONFIG_ENV_IS_IN_NAND
+#define SMNAND_ENV_OFFSET 0x260000 /* environment starts here */
+#define CONFIG_ENV_OFFSET SMNAND_ENV_OFFSET
+#define CONFIG_ENV_ADDR SMNAND_ENV_OFFSET
+
+#if defined(CONFIG_CMD_NET)
+#define CONFIG_DRIVER_TI_EMAC
+#define CONFIG_DRIVER_TI_EMAC_USE_RMII
+#define CONFIG_MII
+#define CONFIG_SMC911X
+#define CONFIG_SMC911X_32_BIT
+#define CONFIG_SMC911X_BASE (0x2C000000 + (16 << 20))
+#endif /* CONFIG_CMD_NET */
+
+/* additions for new relocation code, must be added to all boards */
+#define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1
+#define CONFIG_SYS_INIT_RAM_ADDR 0x4020f800
+#define CONFIG_SYS_INIT_RAM_SIZE 0x800
+#define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_INIT_RAM_ADDR + \
+ CONFIG_SYS_INIT_RAM_SIZE - \
+ GENERATED_GBL_DATA_SIZE)
+
+/* Status LED */
+#define CONFIG_STATUS_LED /* Status LED enabled */
+#define CONFIG_BOARD_SPECIFIC_LED
+#define CONFIG_GPIO_LED
+#define GREEN_LED_GPIO 186 /* CM-T3517 Green LED is GPIO186 */
+#define GREEN_LED_DEV 0
+#define STATUS_LED_BIT GREEN_LED_GPIO
+#define STATUS_LED_STATE STATUS_LED_ON
+#define STATUS_LED_PERIOD (CONFIG_SYS_HZ / 2)
+#define STATUS_LED_BOOT GREEN_LED_DEV
+
+/* GPIO banks */
+#ifdef CONFIG_STATUS_LED
+#define CONFIG_OMAP3_GPIO_6 /* GPIO186 is in GPIO bank 6 */
+#endif
+
+/* Display Configuration */
+#define CONFIG_OMAP3_GPIO_2
+#define CONFIG_OMAP3_GPIO_5
+#define CONFIG_VIDEO_OMAP3
+#define LCD_BPP LCD_COLOR16
+
+#define CONFIG_LCD
+#define CONFIG_SPLASH_SCREEN
+#define CONFIG_SPLASHIMAGE_GUARD
+#define CONFIG_CMD_BMP
+#define CONFIG_BMP_16BPP
+#define CONFIG_SCF0403_LCD
+
+#define CONFIG_OMAP3_SPI
+
+#endif /* __CONFIG_H */
/* U-Boot general configuration */
#define CONFIG_SYS_PROMPT "K2E EVM # "
-#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\
- "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0"
-
-#define KS2_FDT_NAME "name_fdt=k2e-evm.dtb\0"
-#define KS2_ADDR_MON "addr_mon=0x0c140000\0"
-#define KS2_NAME_MON "name_mon=skern-k2e-evm.bin\0"
-#define NAME_UBOOT "name_uboot=u-boot-spi-k2e-evm.gph\0"
-#define NAME_UBI "name_ubi=k2e-evm-ubifs.ubi\0"
+#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+ "addr_mon=0x0c140000\0" \
+ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \
+ "name_fdt=uImage-k2e-evm.dtb\0" \
+ "name_mon=skern-k2e-evm.bin\0" \
+ "name_ubi=k2e-evm-ubifs.ubi\0" \
+ "name_uboot=u-boot-spi-k2e-evm.gph\0" \
+ "name_fs=arago-console-image-k2e-evm.cpio.gz\0"
#include <configs/ks2_evm.h>
#define CONFIG_SYS_NAND_PAGE_2K
/* Network */
-#define CONFIG_DRIVER_TI_KEYSTONE_NET
-#define CONFIG_TI_KSNAV
-#define CONFIG_KSNAV_PKTDMA_NETCP
#define CONFIG_KSNET_NETCP_V1_5
#define CONFIG_KSNET_CPSW_NUM_PORTS 9
#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
-/* SerDes */
-#define CONFIG_TI_KEYSTONE_SERDES
-
#endif /* __CONFIG_K2E_EVM_H */
/* U-Boot general configuration */
#define CONFIG_SYS_PROMPT "K2HK EVM # "
-#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\
- "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0"
-
-#define KS2_FDT_NAME "name_fdt=k2hk-evm.dtb\0"
-#define KS2_ADDR_MON "addr_mon=0x0c5f0000\0"
-#define KS2_NAME_MON "name_mon=skern-k2hk-evm.bin\0"
-#define NAME_UBOOT "name_uboot=u-boot-spi-k2hk-evm.gph\0"
-#define NAME_UBI "name_ubi=k2hk-evm-ubifs.ubi\0"
+#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+ "addr_mon=0x0c5f0000\0" \
+ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,2048\0" \
+ "name_fdt=uImage-k2hk-evm.dtb\0" \
+ "name_mon=skern-k2hk-evm.bin\0" \
+ "name_ubi=k2hk-evm-ubifs.ubi\0" \
+ "name_uboot=u-boot-spi-k2hk-evm.gph\0" \
+ "name_fs=arago-console-image-k2hk-evm.cpio.gz\0"
#include <configs/ks2_evm.h>
#define CONFIG_SYS_NAND_PAGE_2K
/* Network */
-#define CONFIG_DRIVER_TI_KEYSTONE_NET
-#define CONFIG_TI_KSNAV
-#define CONFIG_KSNAV_PKTDMA_NETCP
#define CONFIG_KSNET_NETCP_V1_0
#define CONFIG_KSNET_CPSW_NUM_PORTS 5
-/* SerDes */
-#define CONFIG_TI_KEYSTONE_SERDES
-
#endif /* __CONFIG_K2HK_EVM_H */
/* U-Boot general configuration */
#define CONFIG_SYS_PROMPT "K2L EVM # "
-#define KS2_ARGS_UBI "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs "\
- "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0"
-
-#define KS2_FDT_NAME "name_fdt=k2l-evm.dtb\0"
-#define KS2_ADDR_MON "addr_mon=0x0c140000\0"
-#define KS2_NAME_MON "name_mon=skern-k2l-evm.bin\0"
-#define NAME_UBOOT "name_uboot=u-boot-spi-k2l-evm.gph\0"
-#define NAME_UBI "name_ubi=k2l-evm-ubifs.ubi\0"
+#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+ "addr_mon=0x0c140000\0" \
+ "args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
+ "root=ubi0:rootfs rootflags=sync rw ubi.mtd=2,4096\0" \
+ "name_fdt=uImage-k2l-evm.dtb\0" \
+ "name_mon=skern-k2l-evm.bin\0" \
+ "name_ubi=k2l-evm-ubifs.ubi\0" \
+ "name_uboot=u-boot-spi-k2l-evm.gph\0" \
+ "name_fs=arago-console-image-k2l-evm.cpio.gz\0"
#include <configs/ks2_evm.h>
/* NAND Configuration */
#define CONFIG_SYS_NAND_PAGE_4K
+/* Network */
+#define CONFIG_KSNET_NETCP_V1_5
+#define CONFIG_KSNET_CPSW_NUM_PORTS 5
+#define CONFIG_KSNET_MDIO_PHY_CONFIG_ENABLE
+
#endif /* __CONFIG_K2L_EVM_H */
#define CONFIG_SYS_SGMII_RATESCALE 2
/* Keyston Navigator Configuration */
+#define CONFIG_TI_KSNAV
#define CONFIG_KSNAV_QM_BASE_ADDRESS KS2_QM_BASE_ADDRESS
#define CONFIG_KSNAV_QM_CONF_BASE KS2_QM_CONF_BASE
#define CONFIG_KSNAV_QM_DESC_SETUP_BASE KS2_QM_DESC_SETUP_BASE
#define CONFIG_KSNAV_QM_QPOOL_NUM KS2_QM_QPOOL_NUM
/* NETCP pktdma */
+#define CONFIG_KSNAV_PKTDMA_NETCP
#define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE KS2_NETCP_PDMA_CTRL_BASE
#define CONFIG_KSNAV_NETCP_PDMA_TX_BASE KS2_NETCP_PDMA_TX_BASE
#define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM KS2_NETCP_PDMA_TX_CH_NUM
#define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE KS2_NETCP_PDMA_TX_SND_QUEUE
/* Keystone net */
+#define CONFIG_DRIVER_TI_KEYSTONE_NET
#define CONFIG_KSNET_MAC_ID_BASE KS2_MAC_ID_BASE_ADDR
#define CONFIG_KSNET_NETCP_BASE KS2_NETCP_BASE
#define CONFIG_KSNET_SERDES_SGMII_BASE KS2_SGMII_SERDES_BASE
#define CONFIG_KSNET_SERDES_SGMII2_BASE KS2_SGMII_SERDES2_BASE
#define CONFIG_KSNET_SERDES_LANES_PER_SGMII KS2_LANES_PER_SGMII_SERDES
+/* SerDes */
+#define CONFIG_TI_KEYSTONE_SERDES
+
/* AEMIF */
#define CONFIG_TI_AEMIF
#define CONFIG_AEMIF_CNTRL_BASE KS2_AEMIF_CNTRL_BASE
#define CONFIG_CMD_SF
#define CONFIG_CMD_EEPROM
#define CONFIG_CMD_USB
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_FS_GENERIC
/* U-Boot general configuration */
#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_BOOTDELAY 3
#define CONFIG_BOOTFILE "uImage"
#define CONFIG_EXTRA_ENV_SETTINGS \
- "boot=ramfs\0" \
+ CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
+ "boot=ubi\0" \
"tftp_root=/\0" \
"nfs_root=/export\0" \
"mem_lpae=1\0" \
"mem_reserve=512M\0" \
"addr_fdt=0x87000000\0" \
"addr_kern=0x88000000\0" \
- KS2_ADDR_MON \
"addr_uboot=0x87000000\0" \
"addr_fs=0x82000000\0" \
"addr_ubi=0x82000000\0" \
"addr_secdb_key=0xc000000\0" \
"fdt_high=0xffffffff\0" \
- KS2_FDT_NAME \
- "name_fs=arago-console-image.cpio.gz\0" \
- "name_kern=uImage\0" \
- KS2_NAME_MON \
- NAME_UBOOT \
- NAME_UBI \
+ "name_kern=uImage-keystone-evm.bin\0" \
"run_mon=mon_install ${addr_mon}\0" \
"run_kern=bootm ${addr_kern} - ${addr_fdt}\0" \
"init_net=run args_all args_net\0" \
"init_ubi=run args_all args_ubi; " \
- "ubi part ubifs; ubifsmount boot;" \
+ "ubi part ubifs; ubifsmount ubi:boot;" \
"ubifsload ${addr_secdb_key} securedb.key.bin;\0" \
"get_fdt_net=dhcp ${addr_fdt} ${tftp_root}/${name_fdt}\0" \
"get_fdt_ubi=ubifsload ${addr_fdt} ${name_fdt}\0" \
"burn_uboot_nand=nand erase 0 0x100000; " \
"nand write ${addr_uboot} 0 ${filesize}\0" \
"args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1\0" \
- KS2_ARGS_UBI \
"args_net=setenv bootargs ${bootargs} rootfstype=nfs " \
"root=/dev/nfs rw nfsroot=${serverip}:${nfs_root}," \
"${nfs_options} ip=dhcp\0" \
* High Level Configuration Options
*/
#define CONFIG_MPC5200
+#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_SYS_GENERIC_BOARD
#define CONFIG_SYS_MPC5XXX_CLKIN 33000000 /* running at 33.000000MHz */
#define CONFIG_REVISION_TAG 1
-#define CONFIG_SUPPORT_RAW_INITRD
-
/* define to enable boot progress via leds */
#if (CONFIG_MACH_TYPE == MACH_TYPE_IGEP0020) || \
(CONFIG_MACH_TYPE == MACH_TYPE_IGEP0030)
#define CONFIG_CMD_ASKENV
#define CONFIG_CMD_ECHO
#define CONFIG_CMD_BOOTZ
+#define CONFIG_SUPPORT_RAW_INITRD
/*
* Common filesystems support. When we have removable storage we
--- /dev/null
+/*
+ * include/linux/serial_reg.h
+ *
+ * Copyright (C) 1992, 1994 by Theodore Ts'o.
+ *
+ * SPDX-License-Identifier: GPL-2.0+
+ *
+ * These are the UART port assignments, expressed as offsets from the base
+ * register. These assignments should hold for any serial port based on
+ * a 8250, 16450, or 16550(A).
+ */
+
+#ifndef _LINUX_SERIAL_REG_H
+#define _LINUX_SERIAL_REG_H
+
+/*
+ * DLAB=0
+ */
+#define UART_RX 0 /* In: Receive buffer */
+#define UART_TX 0 /* Out: Transmit buffer */
+
+#define UART_IER 1 /* Out: Interrupt Enable Register */
+#define UART_IER_MSI 0x08 /* Enable Modem status interrupt */
+#define UART_IER_RLSI 0x04 /* Enable receiver line status interrupt */
+#define UART_IER_THRI 0x02 /* Enable Transmitter holding register int. */
+#define UART_IER_RDI 0x01 /* Enable receiver data interrupt */
+/*
+ * Sleep mode for ST16650 and TI16750. For the ST16650, EFR[4]=1
+ */
+#define UART_IERX_SLEEP 0x10 /* Enable sleep mode */
+
+#define UART_IIR 2 /* In: Interrupt ID Register */
+#define UART_IIR_NO_INT 0x01 /* No interrupts pending */
+#define UART_IIR_ID 0x0e /* Mask for the interrupt ID */
+#define UART_IIR_MSI 0x00 /* Modem status interrupt */
+#define UART_IIR_THRI 0x02 /* Transmitter holding register empty */
+#define UART_IIR_RDI 0x04 /* Receiver data interrupt */
+#define UART_IIR_RLSI 0x06 /* Receiver line status interrupt */
+
+#define UART_IIR_BUSY 0x07 /* DesignWare APB Busy Detect */
+
+#define UART_IIR_RX_TIMEOUT 0x0c /* OMAP RX Timeout interrupt */
+#define UART_IIR_XOFF 0x10 /* OMAP XOFF/Special Character */
+#define UART_IIR_CTS_RTS_DSR 0x20 /* OMAP CTS/RTS/DSR Change */
+
+#define UART_FCR 2 /* Out: FIFO Control Register */
+#define UART_FCR_ENABLE_FIFO 0x01 /* Enable the FIFO */
+#define UART_FCR_CLEAR_RCVR 0x02 /* Clear the RCVR FIFO */
+#define UART_FCR_CLEAR_XMIT 0x04 /* Clear the XMIT FIFO */
+#define UART_FCR_DMA_SELECT 0x08 /* For DMA applications */
+/*
+ * Note: The FIFO trigger levels are chip specific:
+ * RX:76 = 00 01 10 11 TX:54 = 00 01 10 11
+ * PC16550D: 1 4 8 14 xx xx xx xx
+ * TI16C550A: 1 4 8 14 xx xx xx xx
+ * TI16C550C: 1 4 8 14 xx xx xx xx
+ * ST16C550: 1 4 8 14 xx xx xx xx
+ * ST16C650: 8 16 24 28 16 8 24 30 PORT_16650V2
+ * NS16C552: 1 4 8 14 xx xx xx xx
+ * ST16C654: 8 16 56 60 8 16 32 56 PORT_16654
+ * TI16C750: 1 16 32 56 xx xx xx xx PORT_16750
+ * TI16C752: 8 16 56 60 8 16 32 56
+ * Tegra: 1 4 8 14 16 8 4 1 PORT_TEGRA
+ */
+#define UART_FCR_R_TRIG_00 0x00
+#define UART_FCR_R_TRIG_01 0x40
+#define UART_FCR_R_TRIG_10 0x80
+#define UART_FCR_R_TRIG_11 0xc0
+#define UART_FCR_T_TRIG_00 0x00
+#define UART_FCR_T_TRIG_01 0x10
+#define UART_FCR_T_TRIG_10 0x20
+#define UART_FCR_T_TRIG_11 0x30
+
+#define UART_FCR_TRIGGER_MASK 0xC0 /* Mask for the FIFO trigger range */
+#define UART_FCR_TRIGGER_1 0x00 /* Mask for trigger set at 1 */
+#define UART_FCR_TRIGGER_4 0x40 /* Mask for trigger set at 4 */
+#define UART_FCR_TRIGGER_8 0x80 /* Mask for trigger set at 8 */
+#define UART_FCR_TRIGGER_14 0xC0 /* Mask for trigger set at 14 */
+/* 16650 definitions */
+#define UART_FCR6_R_TRIGGER_8 0x00 /* Mask for receive trigger set at 1 */
+#define UART_FCR6_R_TRIGGER_16 0x40 /* Mask for receive trigger set at 4 */
+#define UART_FCR6_R_TRIGGER_24 0x80 /* Mask for receive trigger set at 8 */
+#define UART_FCR6_R_TRIGGER_28 0xC0 /* Mask for receive trigger set at 14 */
+#define UART_FCR6_T_TRIGGER_16 0x00 /* Mask for transmit trigger set at 16 */
+#define UART_FCR6_T_TRIGGER_8 0x10 /* Mask for transmit trigger set at 8 */
+#define UART_FCR6_T_TRIGGER_24 0x20 /* Mask for transmit trigger set at 24 */
+#define UART_FCR6_T_TRIGGER_30 0x30 /* Mask for transmit trigger set at 30 */
+#define UART_FCR7_64BYTE 0x20 /* Go into 64 byte mode (TI16C750) */
+
+#define UART_LCR 3 /* Out: Line Control Register */
+/*
+ * Note: if the word length is 5 bits (UART_LCR_WLEN5), then setting
+ * UART_LCR_STOP will select 1.5 stop bits, not 2 stop bits.
+ */
+#define UART_LCR_DLAB 0x80 /* Divisor latch access bit */
+#define UART_LCR_SBC 0x40 /* Set break control */
+#define UART_LCR_SPAR 0x20 /* Stick parity (?) */
+#define UART_LCR_EPAR 0x10 /* Even parity select */
+#define UART_LCR_PARITY 0x08 /* Parity Enable */
+#define UART_LCR_STOP 0x04 /* Stop bits: 0=1 bit, 1=2 bits */
+#define UART_LCR_WLEN5 0x00 /* Wordlength: 5 bits */
+#define UART_LCR_WLEN6 0x01 /* Wordlength: 6 bits */
+#define UART_LCR_WLEN7 0x02 /* Wordlength: 7 bits */
+#define UART_LCR_WLEN8 0x03 /* Wordlength: 8 bits */
+
+/*
+ * Access to some registers depends on register access / configuration
+ * mode.
+ */
+#define UART_LCR_CONF_MODE_A UART_LCR_DLAB /* Configutation mode A */
+#define UART_LCR_CONF_MODE_B 0xBF /* Configutation mode B */
+
+#define UART_MCR 4 /* Out: Modem Control Register */
+#define UART_MCR_CLKSEL 0x80 /* Divide clock by 4 (TI16C752, EFR[4]=1) */
+#define UART_MCR_TCRTLR 0x40 /* Access TCR/TLR (TI16C752, EFR[4]=1) */
+#define UART_MCR_XONANY 0x20 /* Enable Xon Any (TI16C752, EFR[4]=1) */
+#define UART_MCR_AFE 0x20 /* Enable auto-RTS/CTS (TI16C550C/TI16C750) */
+#define UART_MCR_LOOP 0x10 /* Enable loopback test mode */
+#define UART_MCR_OUT2 0x08 /* Out2 complement */
+#define UART_MCR_OUT1 0x04 /* Out1 complement */
+#define UART_MCR_RTS 0x02 /* RTS complement */
+#define UART_MCR_DTR 0x01 /* DTR complement */
+
+#define UART_LSR 5 /* In: Line Status Register */
+#define UART_LSR_FIFOE 0x80 /* Fifo error */
+#define UART_LSR_TEMT 0x40 /* Transmitter empty */
+#define UART_LSR_THRE 0x20 /* Transmit-hold-register empty */
+#define UART_LSR_BI 0x10 /* Break interrupt indicator */
+#define UART_LSR_FE 0x08 /* Frame error indicator */
+#define UART_LSR_PE 0x04 /* Parity error indicator */
+#define UART_LSR_OE 0x02 /* Overrun error indicator */
+#define UART_LSR_DR 0x01 /* Receiver data ready */
+#define UART_LSR_BRK_ERROR_BITS 0x1E /* BI, FE, PE, OE bits */
+
+#define UART_MSR 6 /* In: Modem Status Register */
+#define UART_MSR_DCD 0x80 /* Data Carrier Detect */
+#define UART_MSR_RI 0x40 /* Ring Indicator */
+#define UART_MSR_DSR 0x20 /* Data Set Ready */
+#define UART_MSR_CTS 0x10 /* Clear to Send */
+#define UART_MSR_DDCD 0x08 /* Delta DCD */
+#define UART_MSR_TERI 0x04 /* Trailing edge ring indicator */
+#define UART_MSR_DDSR 0x02 /* Delta DSR */
+#define UART_MSR_DCTS 0x01 /* Delta CTS */
+#define UART_MSR_ANY_DELTA 0x0F /* Any of the delta bits! */
+
+#define UART_SCR 7 /* I/O: Scratch Register */
+
+/*
+ * DLAB=1
+ */
+#define UART_DLL 0 /* Out: Divisor Latch Low */
+#define UART_DLM 1 /* Out: Divisor Latch High */
+
+/*
+ * LCR=0xBF (or DLAB=1 for 16C660)
+ */
+#define UART_EFR 2 /* I/O: Extended Features Register */
+#define UART_XR_EFR 9 /* I/O: Extended Features Register (XR17D15x) */
+#define UART_EFR_CTS 0x80 /* CTS flow control */
+#define UART_EFR_RTS 0x40 /* RTS flow control */
+#define UART_EFR_SCD 0x20 /* Special character detect */
+#define UART_EFR_ECB 0x10 /* Enhanced control bit */
+/*
+ * the low four bits control software flow control
+ */
+
+/*
+ * LCR=0xBF, TI16C752, ST16650, ST16650A, ST16654
+ */
+#define UART_XON1 4 /* I/O: Xon character 1 */
+#define UART_XON2 5 /* I/O: Xon character 2 */
+#define UART_XOFF1 6 /* I/O: Xoff character 1 */
+#define UART_XOFF2 7 /* I/O: Xoff character 2 */
+
+/*
+ * EFR[4]=1 MCR[6]=1, TI16C752
+ */
+#define UART_TI752_TCR 6 /* I/O: transmission control register */
+#define UART_TI752_TLR 7 /* I/O: trigger level register */
+
+/*
+ * LCR=0xBF, XR16C85x
+ */
+#define UART_TRG 0 /* FCTR bit 7 selects Rx or Tx
+ * In: Fifo count
+ * Out: Fifo custom trigger levels */
+/*
+ * These are the definitions for the Programmable Trigger Register
+ */
+#define UART_TRG_1 0x01
+#define UART_TRG_4 0x04
+#define UART_TRG_8 0x08
+#define UART_TRG_16 0x10
+#define UART_TRG_32 0x20
+#define UART_TRG_64 0x40
+#define UART_TRG_96 0x60
+#define UART_TRG_120 0x78
+#define UART_TRG_128 0x80
+
+#define UART_FCTR 1 /* Feature Control Register */
+#define UART_FCTR_RTS_NODELAY 0x00 /* RTS flow control delay */
+#define UART_FCTR_RTS_4DELAY 0x01
+#define UART_FCTR_RTS_6DELAY 0x02
+#define UART_FCTR_RTS_8DELAY 0x03
+#define UART_FCTR_IRDA 0x04 /* IrDa data encode select */
+#define UART_FCTR_TX_INT 0x08 /* Tx interrupt type select */
+#define UART_FCTR_TRGA 0x00 /* Tx/Rx 550 trigger table select */
+#define UART_FCTR_TRGB 0x10 /* Tx/Rx 650 trigger table select */
+#define UART_FCTR_TRGC 0x20 /* Tx/Rx 654 trigger table select */
+#define UART_FCTR_TRGD 0x30 /* Tx/Rx 850 programmable trigger select */
+#define UART_FCTR_SCR_SWAP 0x40 /* Scratch pad register swap */
+#define UART_FCTR_RX 0x00 /* Programmable trigger mode select */
+#define UART_FCTR_TX 0x80 /* Programmable trigger mode select */
+
+/*
+ * LCR=0xBF, FCTR[6]=1
+ */
+#define UART_EMSR 7 /* Extended Mode Select Register */
+#define UART_EMSR_FIFO_COUNT 0x01 /* Rx/Tx select */
+#define UART_EMSR_ALT_COUNT 0x02 /* Alternating count select */
+
+/*
+ * The Intel XScale on-chip UARTs define these bits
+ */
+#define UART_IER_DMAE 0x80 /* DMA Requests Enable */
+#define UART_IER_UUE 0x40 /* UART Unit Enable */
+#define UART_IER_NRZE 0x20 /* NRZ coding Enable */
+#define UART_IER_RTOIE 0x10 /* Receiver Time Out Interrupt Enable */
+
+#define UART_IIR_TOD 0x08 /* Character Timeout Indication Detected */
+
+#define UART_FCR_PXAR1 0x00 /* receive FIFO threshold = 1 */
+#define UART_FCR_PXAR8 0x40 /* receive FIFO threshold = 8 */
+#define UART_FCR_PXAR16 0x80 /* receive FIFO threshold = 16 */
+#define UART_FCR_PXAR32 0xc0 /* receive FIFO threshold = 32 */
+
+/*
+ * Intel MID on-chip HSU (High Speed UART) defined bits
+ */
+#define UART_FCR_HSU_64_1B 0x00 /* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_64_16B 0x40 /* receive FIFO treshold = 16 */
+#define UART_FCR_HSU_64_32B 0x80 /* receive FIFO treshold = 32 */
+#define UART_FCR_HSU_64_56B 0xc0 /* receive FIFO treshold = 56 */
+
+#define UART_FCR_HSU_16_1B 0x00 /* receive FIFO treshold = 1 */
+#define UART_FCR_HSU_16_4B 0x40 /* receive FIFO treshold = 4 */
+#define UART_FCR_HSU_16_8B 0x80 /* receive FIFO treshold = 8 */
+#define UART_FCR_HSU_16_14B 0xc0 /* receive FIFO treshold = 14 */
+
+#define UART_FCR_HSU_64B_FIFO 0x20 /* chose 64 bytes FIFO */
+#define UART_FCR_HSU_16B_FIFO 0x00 /* chose 16 bytes FIFO */
+
+#define UART_FCR_HALF_EMPT_TXI 0x00 /* trigger TX_EMPT IRQ for half empty */
+#define UART_FCR_FULL_EMPT_TXI 0x08 /* trigger TX_EMPT IRQ for full empty */
+
+/*
+ * These register definitions are for the 16C950
+ */
+#define UART_ASR 0x01 /* Additional Status Register */
+#define UART_RFL 0x03 /* Receiver FIFO level */
+#define UART_TFL 0x04 /* Transmitter FIFO level */
+#define UART_ICR 0x05 /* Index Control Register */
+
+/* The 16950 ICR registers */
+#define UART_ACR 0x00 /* Additional Control Register */
+#define UART_CPR 0x01 /* Clock Prescalar Register */
+#define UART_TCR 0x02 /* Times Clock Register */
+#define UART_CKS 0x03 /* Clock Select Register */
+#define UART_TTL 0x04 /* Transmitter Interrupt Trigger Level */
+#define UART_RTL 0x05 /* Receiver Interrupt Trigger Level */
+#define UART_FCL 0x06 /* Flow Control Level Lower */
+#define UART_FCH 0x07 /* Flow Control Level Higher */
+#define UART_ID1 0x08 /* ID #1 */
+#define UART_ID2 0x09 /* ID #2 */
+#define UART_ID3 0x0A /* ID #3 */
+#define UART_REV 0x0B /* Revision */
+#define UART_CSR 0x0C /* Channel Software Reset */
+#define UART_NMR 0x0D /* Nine-bit Mode Register */
+#define UART_CTR 0xFF
+
+/*
+ * The 16C950 Additional Control Register
+ */
+#define UART_ACR_RXDIS 0x01 /* Receiver disable */
+#define UART_ACR_TXDIS 0x02 /* Transmitter disable */
+#define UART_ACR_DSRFC 0x04 /* DSR Flow Control */
+#define UART_ACR_TLENB 0x20 /* 950 trigger levels enable */
+#define UART_ACR_ICRRD 0x40 /* ICR Read enable */
+#define UART_ACR_ASREN 0x80 /* Additional status enable */
+
+
+
+/*
+ * These definitions are for the RSA-DV II/S card, from
+ *
+ * Kiyokazu SUTO <suto@ks-and-ks.ne.jp>
+ */
+
+#define UART_RSA_BASE (-8)
+
+#define UART_RSA_MSR ((UART_RSA_BASE) + 0) /* I/O: Mode Select Register */
+
+#define UART_RSA_MSR_SWAP (1 << 0) /* Swap low/high 8 bytes in I/O port addr */
+#define UART_RSA_MSR_FIFO (1 << 2) /* Enable the external FIFO */
+#define UART_RSA_MSR_FLOW (1 << 3) /* Enable the auto RTS/CTS flow control */
+#define UART_RSA_MSR_ITYP (1 << 4) /* Level (1) / Edge triger (0) */
+
+#define UART_RSA_IER ((UART_RSA_BASE) + 1) /* I/O: Interrupt Enable Register */
+
+#define UART_RSA_IER_Rx_FIFO_H (1 << 0) /* Enable Rx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_H (1 << 1) /* Enable Tx FIFO half full int. */
+#define UART_RSA_IER_Tx_FIFO_E (1 << 2) /* Enable Tx FIFO empty int. */
+#define UART_RSA_IER_Rx_TOUT (1 << 3) /* Enable char receive timeout int */
+#define UART_RSA_IER_TIMER (1 << 4) /* Enable timer interrupt */
+
+#define UART_RSA_SRR ((UART_RSA_BASE) + 2) /* IN: Status Read Register */
+
+#define UART_RSA_SRR_Tx_FIFO_NEMP (1 << 0) /* Tx FIFO is not empty (1) */
+#define UART_RSA_SRR_Tx_FIFO_NHFL (1 << 1) /* Tx FIFO is not half full (1) */
+#define UART_RSA_SRR_Tx_FIFO_NFUL (1 << 2) /* Tx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NEMP (1 << 3) /* Rx FIFO is not empty (1) */
+#define UART_RSA_SRR_Rx_FIFO_NHFL (1 << 4) /* Rx FIFO is not half full (1) */
+#define UART_RSA_SRR_Rx_FIFO_NFUL (1 << 5) /* Rx FIFO is not full (1) */
+#define UART_RSA_SRR_Rx_TOUT (1 << 6) /* Character reception timeout occurred (1) */
+#define UART_RSA_SRR_TIMER (1 << 7) /* Timer interrupt occurred */
+
+#define UART_RSA_FRR ((UART_RSA_BASE) + 2) /* OUT: FIFO Reset Register */
+
+#define UART_RSA_TIVSR ((UART_RSA_BASE) + 3) /* I/O: Timer Interval Value Set Register */
+
+#define UART_RSA_TCR ((UART_RSA_BASE) + 4) /* OUT: Timer Control Register */
+
+#define UART_RSA_TCR_SWITCH (1 << 0) /* Timer on */
+
+/*
+ * The RSA DSV/II board has two fixed clock frequencies. One is the
+ * standard rate, and the other is 8 times faster.
+ */
+#define SERIAL_RSA_BAUD_BASE (921600)
+#define SERIAL_RSA_BAUD_BASE_LO (SERIAL_RSA_BAUD_BASE / 8)
+
+/*
+ * Extra serial register definitions for the internal UARTs
+ * in TI OMAP processors.
+ */
+#define UART_OMAP_MDR1 0x08 /* Mode definition register */
+#define UART_OMAP_MDR2 0x09 /* Mode definition register 2 */
+#define UART_OMAP_SCR 0x10 /* Supplementary control register */
+#define UART_OMAP_SSR 0x11 /* Supplementary status register */
+#define UART_OMAP_EBLR 0x12 /* BOF length register */
+#define UART_OMAP_OSC_12M_SEL 0x13 /* OMAP1510 12MHz osc select */
+#define UART_OMAP_MVER 0x14 /* Module version register */
+#define UART_OMAP_SYSC 0x15 /* System configuration register */
+#define UART_OMAP_SYSS 0x16 /* System status register */
+#define UART_OMAP_WER 0x17 /* Wake-up enable register */
+
+/*
+ * These are the definitions for the MDR1 register
+ */
+#define UART_OMAP_MDR1_16X_MODE 0x00 /* UART 16x mode */
+#define UART_OMAP_MDR1_SIR_MODE 0x01 /* SIR mode */
+#define UART_OMAP_MDR1_16X_ABAUD_MODE 0x02 /* UART 16x auto-baud */
+#define UART_OMAP_MDR1_13X_MODE 0x03 /* UART 13x mode */
+#define UART_OMAP_MDR1_MIR_MODE 0x04 /* MIR mode */
+#define UART_OMAP_MDR1_FIR_MODE 0x05 /* FIR mode */
+#define UART_OMAP_MDR1_CIR_MODE 0x06 /* CIR mode */
+#define UART_OMAP_MDR1_DISABLE 0x07 /* Disable (default state) */
+
+/*
+ * These are definitions for the Exar XR17V35X and XR17(C|D)15X
+ */
+#define UART_EXAR_8XMODE 0x88 /* 8X sampling rate select */
+#define UART_EXAR_SLEEP 0x8b /* Sleep mode */
+#define UART_EXAR_DVID 0x8d /* Device identification */
+
+#define UART_EXAR_FCTR 0x08 /* Feature Control Register */
+#define UART_FCTR_EXAR_IRDA 0x08 /* IrDa data encode select */
+#define UART_FCTR_EXAR_485 0x10 /* Auto 485 half duplex dir ctl */
+#define UART_FCTR_EXAR_TRGA 0x00 /* FIFO trigger table A */
+#define UART_FCTR_EXAR_TRGB 0x60 /* FIFO trigger table B */
+#define UART_FCTR_EXAR_TRGC 0x80 /* FIFO trigger table C */
+#define UART_FCTR_EXAR_TRGD 0xc0 /* FIFO trigger table D programmable */
+
+#define UART_EXAR_TXTRG 0x0a /* Tx FIFO trigger level write-only */
+#define UART_EXAR_RXTRG 0x0b /* Rx FIFO trigger level write-only */
+
+#endif /* _LINUX_SERIAL_REG_H */
+
/* Voltage Selection in PM Receiver Module */
#define TWL4030_PM_RECEIVER_VAUX2_VSEL_18 0x05
+#define TWL4030_PM_RECEIVER_VAUX2_VSEL_28 0x09
+#define TWL4030_PM_RECEIVER_VAUX3_VSEL_18 0x01
#define TWL4030_PM_RECEIVER_VAUX3_VSEL_28 0x03
#define TWL4030_PM_RECEIVER_VPLL2_VSEL_18 0x05
#define TWL4030_PM_RECEIVER_VDAC_VSEL_18 0x03
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.build obj=
# Usage:
# $(Q)$(MAKE) $(build)=dir
-build := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.build obj
+build := -f $(srctree)/scripts/Makefile.build obj
###
# Shorthand for $(Q)$(MAKE) -f scripts/Makefile.modbuiltin obj=
# Usage:
# $(Q)$(MAKE) $(modbuiltin)=dir
-modbuiltin := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.modbuiltin obj
+modbuiltin := -f $(srctree)/scripts/Makefile.modbuiltin obj
# Prefix -I with $(srctree) if it is not an absolute path.
# skip if -I has no parameter
arg-check = $(if $(strip $(cmd_$@)),,1)
endif
-# >'< substitution is for echo to work,
-# >$< substitution to preserve $ when reloading .cmd file
-# note: when using inline perl scripts [perl -e '...$$t=1;...']
-# in $(cmd_xxx) double $$ your perl vars
-make-cmd = $(subst \\,\\\\,$(subst \#,\\\#,$(subst $$,$$$$,$(call escsq,$(cmd_$(1))))))
+# Replace >$< with >$$< to preserve $ when reloading the .cmd file
+# (needed for make)
+# Replace >#< with >\#< to avoid starting a comment in the .cmd file
+# (needed for make)
+# Replace >'< with >'\''< to be able to enclose the whole string in '...'
+# (needed for the shell)
+make-cmd = $(call escsq,$(subst \#,\\\#,$(subst $$,$$$$,$(cmd_$(1)))))
# Find any prerequisites that is newer than target or that does not exist.
# PHONY targets skipped in both cases.
if_changed = $(if $(strip $(any-prereq) $(arg-check)), \
@set -e; \
$(echo-cmd) $(cmd_$(1)); \
- echo 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
+ printf '%s\n' 'cmd_$@ := $(make-cmd)' > $(dot-target).cmd)
# Execute the command and also postprocess generated .d dependencies file.
if_changed_dep = $(if $(strip $(any-prereq) $(arg-check) ), \
create_symlink:
ifneq ($(KBUILD_SRC),)
$(Q)mkdir -p include/asm
+ $(Q)ln -fsn $(KBUILD_SRC)/arch/$(ARCH)/include/asm/arch-$(if $(SOC),$(SOC),$(CPU)) \
+ include/asm/arch
+else
+ $(Q)ln -fsn arch-$(if $(SOC),$(SOC),$(CPU)) \
+ arch/$(ARCH)/include/asm/arch
endif
- $(Q)ln -fsn $(srctree)/arch/$(ARCH)/include/asm/arch-$(if $(SOC),$(SOC),$(CPU)) \
- $(if $(KBUILD_SRC),,arch/$(ARCH)/)include/asm/arch
PHONY += FORCE
FORCE:
# ===========================================================================
-ifneq ($(strip $(lib-y) $(lib-m) $(lib-n) $(lib-)),)
+ifneq ($(strip $(lib-y) $(lib-m) $(lib-)),)
lib-target := $(obj)/lib.a
endif
-ifneq ($(strip $(obj-y) $(obj-m) $(obj-n) $(obj-) $(subdir-m) $(lib-target)),)
+ifneq ($(strip $(obj-y) $(obj-m) $(obj-) $(subdir-m) $(lib-target)),)
builtin-target := $(obj)/built-in.o
endif
quiet_cmd_link_multi-m = LD [M] $@
cmd_link_multi-m = $(cmd_link_multi-y)
-# We would rather have a list of rules like
-# foo.o: $(foo-objs)
-# but that's not so easy, so we rather make all composite objects depend
-# on the set of all their parts
-$(multi-used-y) : %.o: $(multi-objs-y) FORCE
+$(multi-used-y): FORCE
$(call if_changed,link_multi-y)
+$(call multi_depend, $(multi-used-y), .o, -objs -y)
-$(multi-used-m) : %.o: $(multi-objs-m) FORCE
+$(multi-used-m): FORCE
$(call if_changed,link_multi-m)
@{ echo $(@:.o=.ko); echo $(link_multi_deps); } > $(MODVERDIR)/$(@F:.o=.mod)
+$(call multi_depend, $(multi-used-m), .o, -objs -y)
targets += $(multi-used-y) $(multi-used-m)
# Shorthand for $(Q)$(MAKE) scripts/Makefile.clean obj=dir
# Usage:
# $(Q)$(MAKE) $(clean)=dir
-clean := -f $(if $(KBUILD_SRC),$(srctree)/)scripts/Makefile.clean obj
+clean := -f $(srctree)/scripts/Makefile.clean obj
# The filename Kbuild has precedence over Makefile
kbuild-dir := $(if $(filter /%,$(src)),$(src),$(srctree)/$(src))
subdir-y += $(__subdir-y)
__subdir-m := $(patsubst %/,%,$(filter %/, $(obj-m)))
subdir-m += $(__subdir-m)
-__subdir-n := $(patsubst %/,%,$(filter %/, $(obj-n)))
-subdir-n += $(__subdir-n)
__subdir- := $(patsubst %/,%,$(filter %/, $(obj-)))
subdir- += $(__subdir-)
# Subdirectories we need to descend into
subdir-ym := $(sort $(subdir-y) $(subdir-m))
-subdir-ymn := $(sort $(subdir-ym) $(subdir-n) $(subdir-))
+subdir-ymn := $(sort $(subdir-ym) $(subdir-))
# Add subdir path
# Will compile qconf as a C++ program, and menu as a C program.
# They are linked as C++ code to the executable qconf
-# hostprogs-y := conf
-# conf-objs := conf.o libkconfig.so
-# libkconfig-objs := expr.o type.o
-# Will create a shared library named libkconfig.so that consists of
-# expr.o and type.o (they are both compiled as C code and the object files
-# are made as position independent code).
-# conf.c is compiled as a C program, and conf.o is linked together with
-# libkconfig.so as the executable conf.
-# Note: Shared libraries consisting of C++ files are not supported
-
__hostprogs := $(sort $(hostprogs-y) $(hostprogs-m))
# C code
# Executables compiled from a single .c file
-host-csingle := $(foreach m,$(__hostprogs),$(if $($(m)-objs),,$(m)))
+host-csingle := $(foreach m,$(__hostprogs), \
+ $(if $($(m)-objs)$($(m)-cxxobjs),,$(m)))
# C executables linked based on several .o files
host-cmulti := $(foreach m,$(__hostprogs),\
host-cobjs := $(sort $(foreach m,$(__hostprogs),$($(m)-objs)))
# C++ code
-# C++ executables compiled from at least on .cc file
+# C++ executables compiled from at least one .cc file
# and zero or more .c files
host-cxxmulti := $(foreach m,$(__hostprogs),$(if $($(m)-cxxobjs),$(m)))
# C++ Object (.o) files compiled from .cc files
host-cxxobjs := $(sort $(foreach m,$(host-cxxmulti),$($(m)-cxxobjs)))
-# Shared libaries (only .c supported)
-# Shared libraries (.so) - all .so files referenced in "xxx-objs"
-host-cshlib := $(sort $(filter %.so, $(host-cobjs)))
-# Remove .so files from "xxx-objs"
-host-cobjs := $(filter-out %.so,$(host-cobjs))
-
-#Object (.o) files used by the shared libaries
-host-cshobjs := $(sort $(foreach m,$(host-cshlib),$($(m:.so=-objs))))
-
# output directory for programs/.o files
-# hostprogs-y := tools/build may have been specified. Retrieve directory
-host-objdirs := $(foreach f,$(__hostprogs), $(if $(dir $(f)),$(dir $(f))))
-# directory of .o files from prog-objs notation
-host-objdirs += $(foreach f,$(host-cmulti), \
- $(foreach m,$($(f)-objs), \
- $(if $(dir $(m)),$(dir $(m)))))
-# directory of .o files from prog-cxxobjs notation
-host-objdirs += $(foreach f,$(host-cxxmulti), \
- $(foreach m,$($(f)-cxxobjs), \
- $(if $(dir $(m)),$(dir $(m)))))
+# hostprogs-y := tools/build may have been specified.
+# Retrieve also directory of .o files from prog-objs or prog-cxxobjs notation
+host-objdirs := $(dir $(__hostprogs) $(host-cobjs) $(host-cxxobjs))
host-objdirs := $(strip $(sort $(filter-out ./,$(host-objdirs))))
host-cobjs := $(addprefix $(obj)/,$(host-cobjs))
host-cxxmulti := $(addprefix $(obj)/,$(host-cxxmulti))
host-cxxobjs := $(addprefix $(obj)/,$(host-cxxobjs))
-host-cshlib := $(addprefix $(obj)/,$(host-cshlib))
-host-cshobjs := $(addprefix $(obj)/,$(host-cshobjs))
host-objdirs := $(addprefix $(obj)/,$(host-objdirs))
obj-dirs += $(host-objdirs)
cmd_host-cmulti = $(HOSTCC) $(HOSTLDFLAGS) -o $@ \
$(addprefix $(obj)/,$($(@F)-objs)) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cmulti): $(obj)/%: $(host-cobjs) $(host-cshlib) FORCE
+$(host-cmulti): FORCE
$(call if_changed,host-cmulti)
+$(call multi_depend, $(host-cmulti), , -objs)
# Create .o file from a single .c file
# host-cobjs -> .o
$(foreach o,objs cxxobjs,\
$(addprefix $(obj)/,$($(@F)-$(o)))) \
$(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cxxmulti): $(obj)/%: $(host-cobjs) $(host-cxxobjs) $(host-cshlib) FORCE
+$(host-cxxmulti): FORCE
$(call if_changed,host-cxxmulti)
+$(call multi_depend, $(host-cxxmulti), , -objs -cxxobjs)
# Create .o file from a single .cc (C++) file
quiet_cmd_host-cxxobjs = HOSTCXX $@
$(host-cxxobjs): $(obj)/%.o: $(src)/%.cc FORCE
$(call if_changed_dep,host-cxxobjs)
-# Compile .c file, create position independent .o file
-# host-cshobjs -> .o
-quiet_cmd_host-cshobjs = HOSTCC -fPIC $@
- cmd_host-cshobjs = $(HOSTCC) $(hostc_flags) -fPIC -c -o $@ $<
-$(host-cshobjs): $(obj)/%.o: $(src)/%.c FORCE
- $(call if_changed_dep,host-cshobjs)
-
-# Link a shared library, based on position independent .o files
-# *.o -> .so shared library (host-cshlib)
-quiet_cmd_host-cshlib = HOSTLLD -shared $@
- cmd_host-cshlib = $(HOSTCC) $(HOSTLDFLAGS) -shared -o $@ \
- $(addprefix $(obj)/,$($(@F:.so=-objs))) \
- $(HOST_LOADLIBES) $(HOSTLOADLIBES_$(@F))
-$(host-cshlib): $(obj)/%: $(host-cshobjs) FORCE
- $(call if_changed,host-cshlib)
-
targets += $(host-csingle) $(host-cmulti) $(host-cobjs)\
- $(host-cxxmulti) $(host-cxxobjs) $(host-cshlib) $(host-cshobjs)
+ $(host-cxxmulti) $(host-cxxobjs)
modname-multi = $(sort $(foreach m,$(multi-used),\
$(if $(filter $(subst $(obj)/,,$*.o), $($(m:.o=-objs)) $($(m:.o=-y))),$(m:.o=))))
+# Useful for describing the dependency of composite objects
+# Usage:
+# $(call multi_depend, multi_used_targets, suffix_to_remove, suffix_to_add)
+define multi_depend
+$(foreach m, $(notdir $1), \
+ $(eval $(obj)/$m: \
+ $(addprefix $(obj)/, $(foreach s, $3, $($(m:%$(strip $2)=%$(s)))))))
+endef
+
ifdef REGENERATE_PARSERS
# GPERF
%_defconfig: $(obj)/conf
$(Q)$< --defconfig=arch/$(SRCARCH)/configs/$@ $(Kconfig)
+configfiles=$(wildcard $(srctree)/kernel/configs/$(1).config $(srctree)/arch/$(SRCARCH)/configs/$(1).config)
+
+define mergeconfig
+$(if $(wildcard $(objtree)/.config),, $(error You need an existing .config for this target))
+$(if $(call configfiles,$(1)),, $(error No configuration exists for this target on this architecture))
+$(Q)$(CONFIG_SHELL) $(srctree)/scripts/kconfig/merge_config.sh -m -O $(objtree) $(objtree)/.config $(call configfiles,$(1))
+$(Q)yes "" | $(MAKE) -f $(srctree)/Makefile oldconfig
+endef
+
+PHONY += kvmconfig
+kvmconfig:
+ $(call mergeconfig,kvm_guest)
+
+PHONY += tinyconfig
+tinyconfig: allnoconfig
+ $(call mergeconfig,tiny)
+
# Help text used by make help
help:
@echo ' config - Update current config utilising a line-oriented program'
@echo ' randconfig - New config with random answer to all options'
@echo ' listnewconfig - List new options'
@echo ' olddefconfig - Same as silentoldconfig but sets new symbols to their default value'
+# @echo ' kvmconfig - Enable additional options for guest kernel support'
+# @echo ' tinyconfig - Configure the tiniest possible kernel'
# lxdialog stuff
check-lxdialog := $(srctree)/$(src)/lxdialog/check-lxdialog.sh
qconf-objs := zconf.tab.o
gconf-objs := gconf.o zconf.tab.o
-hostprogs-y := conf
-
-ifeq ($(MAKECMDGOALS),nconfig)
- hostprogs-y += nconf
-endif
-
-ifeq ($(MAKECMDGOALS),menuconfig)
- hostprogs-y += mconf
-endif
-
-ifeq ($(MAKECMDGOALS),update-po-config)
- hostprogs-y += kxgettext
-endif
-
-ifeq ($(MAKECMDGOALS),xconfig)
- qconf-target := 1
-endif
-ifeq ($(MAKECMDGOALS),gconfig)
- gconf-target := 1
-endif
-
-
-ifeq ($(qconf-target),1)
- hostprogs-y += qconf
-endif
-
-ifeq ($(gconf-target),1)
- hostprogs-y += gconf
-endif
+hostprogs-y := conf nconf mconf kxgettext qconf gconf
clean-files := qconf.moc .tmp_qtcheck .tmp_gtkcheck
clean-files += zconf.tab.c zconf.lex.c zconf.hash.c gconf.glade.h
-clean-files += mconf qconf gconf nconf
clean-files += config.pot linux.pot
# Check that we have the required ncurses stuff installed for lxdialog (menuconfig)
HOSTLOADLIBES_mconf = $(shell $(CONFIG_SHELL) $(check-lxdialog) -ldflags $(HOSTCC))
HOSTLOADLIBES_nconf = $(shell \
- pkg-config --libs menu panel ncurses 2>/dev/null \
+ pkg-config --libs menuw panelw ncursesw 2>/dev/null \
+ || pkg-config --libs menu panel ncurses 2>/dev/null \
|| echo "-lmenu -lpanel -lncurses" )
$(obj)/qconf.o: $(obj)/.tmp_qtcheck
-ifeq ($(qconf-target),1)
+ifeq ($(MAKECMDGOALS),xconfig)
$(obj)/.tmp_qtcheck: $(src)/Makefile
-include $(obj)/.tmp_qtcheck
$(obj)/gconf.o: $(obj)/.tmp_gtkcheck
-ifeq ($(gconf-target),1)
+ifeq ($(MAKECMDGOALS),gconfig)
-include $(obj)/.tmp_gtkcheck
# GTK needs some extra effort, too...
/* item list manipulation for lxdialog use */
#define MAXITEMSTR 200
struct dialog_item {
- char str[MAXITEMSTR]; /* promtp displayed */
+ char str[MAXITEMSTR]; /* prompt displayed */
char tag;
void *data; /* pointer to menu item - used by menubox+checklist */
int selected; /* Set to 1 by dialog_*() function if selected. */
sub dump_function($$) {
my $prototype = shift;
my $file = shift;
+ my $noret = 0;
$prototype =~ s/^static +//;
$prototype =~ s/^extern +//;
$prototype =~ s/^noinline +//;
$prototype =~ s/__init +//;
$prototype =~ s/__init_or_module +//;
+ $prototype =~ s/__meminit +//;
$prototype =~ s/__must_check +//;
$prototype =~ s/__weak +//;
- $prototype =~ s/^#\s*define\s+//; #ak added
+ my $define = $prototype =~ s/^#\s*define\s+//; #ak added
$prototype =~ s/__attribute__\s*\(\([a-z,]*\)\)//;
# Yes, this truly is vile. We are looking for:
# - atomic_set (macro)
# - pci_match_device, __copy_to_user (long return type)
- if ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
+ if ($define && $prototype =~ m/^()([a-zA-Z0-9_~:]+)\s+/) {
+ # This is an object-like macro, it has no return type and no parameter
+ # list.
+ # Function-like macros are not allowed to have spaces between
+ # declaration_name and opening parenthesis (notice the \s+).
+ $return_type = $1;
+ $declaration_name = $2;
+ $noret = 1;
+ } elsif ($prototype =~ m/^()([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
$prototype =~ m/^(\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
$prototype =~ m/^(\w+\s*\*)\s*([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
$prototype =~ m/^(\w+\s+\w+)\s+([a-zA-Z0-9_~:]+)\s*\(([^\(]*)\)/ ||
# of warnings goes sufficiently down, the check is only performed in
# verbose mode.
# TODO: always perform the check.
- if ($verbose) {
+ if ($verbose && !$noret) {
check_return_section($file, $declaration_name, $return_type);
}
#endif
#endif
+ assert(run_command("", 0) == 0);
+ assert(run_command(" ", 0) == 0);
+
+ assert(run_command("'", 0) == 1);
+
printf("%s: Everything went swimmingly\n", __func__);
return 0;
}
#HOSTCFLAGS_mpc86x_clk.o := -pedantic
quiet_cmd_wrap = WRAP $@
-cmd_wrap = echo "\#include <$(srctree)/$(patsubst $(obj)/%,%,$@)>" >$@
+cmd_wrap = echo "\#include <../$(patsubst $(obj)/%,%,$@)>" >$@
$(obj)/lib/%.c $(obj)/common/%.c:
$(call cmd,wrap)
#endif
static inline ulong getenvsize (void)
{
- ulong rc = CUR_ENVSIZE - sizeof(long);
+ ulong rc = CUR_ENVSIZE - sizeof(uint32_t);
if (HaveRedundEnv)
rc -= sizeof (char);
"\t\tkey1=value1\n"
"\t\tkey2=value2\n"
"\t\t...\n"
+ "\tEmpty lines are skipped, and lines with a # in the first\n"
+ "\tcolumn are treated as comments (also skipped).\n"
"\t-r : the environment has multiple copies in flash\n"
"\t-b : the target is big endian (default is little endian)\n"
"\t-p <byte> : fill the image with <byte> bytes instead of 0xff bytes\n"
/* Replace newlines separating variables with \0 */
for (fp = 0, ep = 0 ; fp < filesize ; fp++) {
if (filebuf[fp] == '\n') {
- if (ep == 0) {
+ if (fp == 0 || filebuf[fp-1] == '\n') {
/*
- * Newlines at the beginning of the file ?
- * Ignore them.
+ * Skip empty lines.
*/
continue;
} else if (filebuf[fp-1] == '\\') {
/* End of a variable */
envptr[ep++] = '\0';
}
+ } else if ((fp == 0 || filebuf[fp-1] == '\n') && filebuf[fp] == '#') {
+ /* Comment, skip the line. */
+ while (++fp < filesize && filebuf[fp] != '\n')
+ continue;
} else {
envptr[ep++] = filebuf[fp];
}
projects / platform / kernel / u-boot.git / commitdiff