include/configs: Use new CONFIG_CMD_* in various e* named board config files.

Signed-off-by: Jon Loeliger <jdl@freescale.com>

diff --git a/include/configs/eXalion.h b/include/configs/eXalion.h
index a014c7c..ac1ef95 100644 (file)
--- a/include/configs/eXalion.h
+++ b/include/configs/eXalion.h
@@ -58,17 +58,18 @@
 
                                                    /*#define CONFIG_DRAM_SPEED       66   */ /* MHz                         */
 
-#define CONFIG_COMMANDS                (   CONFIG_CMD_DFL  | \
-                                   CFG_CMD_FLASH   | \
-                                   CFG_CMD_SDRAM   | \
-                                   CFG_CMD_I2C     | \
-                                   CFG_CMD_IDE     | \
-                                   CFG_CMD_FAT     | \
-                                   CFG_CMD_ENV     | \
-                                   CFG_CMD_PCI )
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any)      */
-#include <cmd_confdefs.h>
+#define CONFIG_CMD_FLASH
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IDE
+#define CONFIG_CMD_FAT
+#define CONFIG_CMD_ENV
+#define CONFIG_CMD_PCI
 
 
 /*-----------------------------------------------------------------------
@@ -398,7 +399,7 @@
  * Cache Configuration
  */
 #define CFG_CACHELINE_SIZE     32
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
 #endif
 

diff --git a/include/configs/ebony.h b/include/configs/ebony.h
index 4a1385c..d86a9ef 100644 (file)
--- a/include/configs/ebony.h
+++ b/include/configs/ebony.h
@@ -208,26 +208,29 @@
 
 #define CONFIG_NETCONSOLE              /* include NetConsole support   */
 
-#define CONFIG_COMMANDS               (CONFIG_CMD_DFL  | \
-                               CFG_CMD_ASKENV  | \
-                               CFG_CMD_DATE    | \
-                               CFG_CMD_DHCP    | \
-                               CFG_CMD_DIAG    | \
-                               CFG_CMD_ELF     | \
-                               CFG_CMD_EEPROM  | \
-                               CFG_CMD_I2C     | \
-                               CFG_CMD_IRQ     | \
-                               CFG_CMD_MII     | \
-                               CFG_CMD_NET     | \
-                               CFG_CMD_NFS     | \
-                               CFG_CMD_PCI     | \
-                               CFG_CMD_PING    | \
-                               CFG_CMD_REGINFO | \
-                               CFG_CMD_SDRAM   | \
-                               CFG_CMD_SNTP    )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_ASKENV
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_DIAG
+#define CONFIG_CMD_ELF
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IRQ
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_NET
+#define CONFIG_CMD_NFS
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_REGINFO
+#define CONFIG_CMD_SDRAM
+#define CONFIG_CMD_SNTP
+
 
 #undef CONFIG_WATCHDOG                 /* watchdog disabled            */
 
@@ -236,7 +239,7 @@
  */
 #define CFG_LONGHELP                   /* undef to save memory         */
 #define CFG_PROMPT     "=> "           /* Monitor Command Prompt       */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE     1024            /* Console I/O Buffer Size      */
 #else
 #define CFG_CBSIZE     256             /* Console I/O Buffer Size      */
@@ -286,7 +289,7 @@
  */
 #define CFG_DCACHE_SIZE                8192    /* For AMCC 405 CPUs                    */
 #define CFG_CACHELINE_SIZE     32      /* ...                  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value        */
 #endif
 
@@ -298,7 +301,7 @@
 #define BOOTFLAG_COLD  0x01            /* Normal Power-On: Boot from FLASH     */
 #define BOOTFLAG_WARM  0x02            /* Software reboot                      */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400  /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2       /* which serial port to use */
 #endif

diff --git a/include/configs/ep7312.h b/include/configs/ep7312.h
index bdda629..12be151 100644 (file)
--- a/include/configs/ep7312.h
+++ b/include/configs/ep7312.h
@@ -64,10 +64,14 @@
 
 #define CONFIG_BOOTP_MASK       (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | CFG_CMD_JFFS2)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_JFFS2
+
 
 #define CONFIG_BOOTDELAY       3
 #define CONFIG_BOOTARGS        "devfs=mount root=ramfs console=ttyS0,9600"
@@ -78,7 +82,7 @@
 /*#define CONFIG_BOOTFILE      "impa7" */
 #define CONFIG_BOOTCOMMAND     "bootp;bootm"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   230400          /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif

diff --git a/include/configs/ep8248.h b/include/configs/ep8248.h
index 04147a5..44c4388 100644 (file)
--- a/include/configs/ep8248.h
+++ b/include/configs/ep8248.h
@@ -123,23 +123,25 @@
 
 #define CONFIG_BAUDRATE                38400
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL   \
-                               | CFG_CMD_DHCP    \
-                               | CFG_CMD_ECHO    \
-                               | CFG_CMD_I2C     \
-                               | CFG_CMD_IMMAP   \
-                               | CFG_CMD_MII     \
-                               | CFG_CMD_PING    \
-                               )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+
 
 #define CONFIG_BOOTDELAY       5       /* autoboot after 5 seconds */
 #define CONFIG_BOOTCOMMAND     "bootm FF860000"        /* autoboot command */
 #define CONFIG_BOOTARGS                "root=/dev/mtdblock1 rw mtdparts=phys:7M(root),-(root)ro"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef CONFIG_KGDB_ON_SMC              /* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC             /* define if kgdb on SCC */
 #undef CONFIG_KGDB_NONE                /* define if kgdb on something else */
@@ -157,7 +159,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "=> "   /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -183,7 +185,7 @@
 
 #define        CFG_DIRECT_FLASH_TFTP
 
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
 #define CFG_JFFS2_FIRST_BANK   0
 #define CFG_JFFS2_NUM_BANKS    CFG_MAX_FLASH_BANKS
 #define CFG_JFFS2_FIRST_SECTOR  0
@@ -192,7 +194,7 @@
 #define CFG_JFFS_CUSTOM_PART
 #endif /* CFG_CMD_JFFS2 */
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 #define CONFIG_HARD_I2C                1       /* To enable I2C support        */
 #define CFG_I2C_SPEED          100000  /* I2C speed                    */
 #define CFG_I2C_SLAVE          0x7F    /* I2C slave address            */
@@ -240,7 +242,7 @@
 #define CFG_BOOTMAPSZ          (8 << 20)       /* Initial Memory map for Linux */
 
 #define CFG_CACHELINE_SIZE     32      /* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT  5       /* log base 2 of the above value */
 #endif
 

diff --git a/include/configs/ep8260.h b/include/configs/ep8260.h
index 6862519..065f967 100644 (file)
--- a/include/configs/ep8260.h
+++ b/include/configs/ep8260.h
@@ -291,37 +291,39 @@
 #define CFG_HUSH_PARSER
 #define CFG_PROMPT_HUSH_PS2    "> "
 
-/* What U-Boot subsytems do you want enabled? */
+
 /*
-*/
-#define CONFIG_COMMANDS                ( CFG_CMD_ALL     & \
-                                 ~(    CFG_CMD_BMP     | \
-                                       CFG_CMD_BSP     | \
-                                       CFG_CMD_DCR     | \
-                                       CFG_CMD_DHCP    | \
-                                       CFG_CMD_DISPLAY | \
-                                       CFG_CMD_DOC     | \
-                                       CFG_CMD_DTT     | \
-                                       CFG_CMD_EEPROM  | \
-                                       CFG_CMD_EXT2    | \
-                                       CFG_CMD_FDC     | \
-                                       CFG_CMD_FDOS    | \
-                                       CFG_CMD_HWFLOW  | \
-                                       CFG_CMD_IDE     | \
-                                       CFG_CMD_JFFS2   | \
-                                       CFG_CMD_KGDB    | \
-                                       CFG_CMD_MII     | \
-                                       CFG_CMD_MMC     | \
-                                       CFG_CMD_NAND    | \
-                                       CFG_CMD_PCI     | \
-                                       CFG_CMD_PCMCIA  | \
-                                       CFG_CMD_REISER  | \
-                                       CFG_CMD_SCSI    | \
-                                       CFG_CMD_SPI     | \
-                                       CFG_CMD_UNIVERSE| \
-                                       CFG_CMD_USB     | \
-                                       CFG_CMD_VFD     | \
-                                       CFG_CMD_XIMG    ) )
+ * Command line configuration.
+ */
+#include <config_cmd_all.h>
+
+#undef CONFIG_CMD_BMP
+#undef CONFIG_CMD_BSP
+#undef CONFIG_CMD_DCR
+#undef CONFIG_CMD_DHCP
+#undef CONFIG_CMD_DISPLAY
+#undef CONFIG_CMD_DOC
+#undef CONFIG_CMD_DTT
+#undef CONFIG_CMD_EEPROM
+#undef CONFIG_CMD_EXT2
+#undef CONFIG_CMD_FDC
+#undef CONFIG_CMD_FDOS
+#undef CONFIG_CMD_HWFLOW
+#undef CONFIG_CMD_IDE
+#undef CONFIG_CMD_JFFS2
+#undef CONFIG_CMD_KGDB
+#undef CONFIG_CMD_MII
+#undef CONFIG_CMD_MMC
+#undef CONFIG_CMD_NAND
+#undef CONFIG_CMD_PCI
+#undef CONFIG_CMD_PCMCIA
+#undef CONFIG_CMD_REISER
+#undef CONFIG_CMD_SCSI
+#undef CONFIG_CMD_SPI
+#undef CONFIG_CMD_UNIVERSE
+#undef CONFIG_CMD_USB
+#undef CONFIG_CMD_VFD
+#undef CONFIG_CMD_XIMG
 
 
 /* Where do the internal registers live? */
@@ -342,13 +344,10 @@
 
 #define CONFIG_BOARD_EARLY_INIT_F 1        /* Call board_early_init_f  */
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
-
 /*
  * Miscellaneous configurable options
  */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CBSIZE              1024       /* Console I/O Buffer Size      */
 #else
 #  define CFG_CBSIZE              256        /* Console I/O Buffer Size      */
@@ -496,7 +495,7 @@
  */
 #define CFG_CACHELINE_SIZE      32      /* For MPC8260 CPU */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #  define CFG_CACHELINE_SHIFT     5     /* log base 2 of the above value */
 #endif
 

diff --git a/include/configs/ep82xxm.h b/include/configs/ep82xxm.h
index a77ccef..5fa7016 100644 (file)
--- a/include/configs/ep82xxm.h
+++ b/include/configs/ep82xxm.h
@@ -108,22 +108,25 @@
 
 #define CFG_VXWORKS_MAC_PTR 0x4300 /* Pass Ethernet MAC to VxWorks */
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL   \
-                               | CFG_CMD_DHCP    \
-                               | CFG_CMD_ECHO    \
-                               | CFG_CMD_I2C     \
-                               | CFG_CMD_IMMAP   \
-                               | CFG_CMD_MII     \
-                               | CFG_CMD_PING    \
-                               | CFG_CMD_DATE    \
-                               | CFG_CMD_DTT     \
-                               | CFG_CMD_EEPROM  \
-                               | CFG_CMD_PCI     \
-                               | CFG_CMD_DIAG    \
-                               )
-
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+
+#define CONFIG_CMD_DHCP
+#define CONFIG_CMD_ECHO
+#define CONFIG_CMD_I2C
+#define CONFIG_CMD_IMMAP
+#define CONFIG_CMD_MII
+#define CONFIG_CMD_PING
+#define CONFIG_CMD_DATE
+#define CONFIG_CMD_DTT
+#define CONFIG_CMD_EEPROM
+#define CONFIG_CMD_PCI
+#define CONFIG_CMD_DIAG
+
 
 #define CONFIG_ETHADDR         00:10:EC:00:88:65
 #define CONFIG_HAS_ETH1
@@ -138,7 +141,7 @@
 #define CONFIG_AUTO_COMPLETE   1
 #define        CONFIG_EXTRA_ENV_SETTINGS       "ethprime=FCC3 ETHERNET"
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #undef CONFIG_KGDB_ON_SMC              /* define if kgdb on SMC */
 #define CONFIG_KGDB_ON_SCC             /* define if kgdb on SCC */
 #undef CONFIG_KGDB_NONE                /* define if kgdb on something else */
@@ -156,7 +159,7 @@
 #define CFG_PROMPT_HUSH_PS2    "> "
 #define CFG_LONGHELP                   /* undef to save memory     */
 #define CFG_PROMPT             "ep82xxm=> "    /* Monitor Command Prompt   */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CBSIZE             1024    /* Console I/O Buffer Size  */
 #else
 #define CFG_CBSIZE             256     /* Console I/O Buffer Size  */
@@ -308,7 +311,7 @@
 
 #define        CFG_DIRECT_FLASH_TFTP
 
-#if (CONFIG_COMMANDS & CFG_CMD_JFFS2)
+#if defined(CONFIG_CMD_JFFS2)
 #define CFG_JFFS2_FIRST_BANK   0
 #define CFG_JFFS2_NUM_BANKS    CFG_MAX_FLASH_BANKS
 #define CFG_JFFS2_FIRST_SECTOR  0
@@ -317,7 +320,7 @@
 #define CFG_JFFS_CUSTOM_PART
 #endif /* CFG_CMD_JFFS2 */
 
-#if (CONFIG_COMMANDS & CFG_CMD_I2C)
+#if defined(CONFIG_CMD_I2C)
 #define CONFIG_HARD_I2C                1       /* To enable I2C support        */
 #define CFG_I2C_SPEED          100000  /* I2C speed                    */
 #define CFG_I2C_SLAVE          0x7F    /* I2C slave address            */
@@ -358,7 +361,7 @@
 #define CFG_BOOTMAPSZ          (8 << 20)       /* Initial Memory map for Linux */
 
 #define CFG_CACHELINE_SIZE     32      /* For MPC8260 CPUs */
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CFG_CACHELINE_SHIFT    5       /* log base 2 of the above value */
 #endif
 

diff --git a/include/configs/evb4510.h b/include/configs/evb4510.h
index 88c2c74..42633be 100644 (file)
--- a/include/configs/evb4510.h
+++ b/include/configs/evb4510.h
@@ -74,10 +74,15 @@
 
 #define CONFIG_BOOTP_MASK      (CONFIG_BOOTP_DEFAULT|CONFIG_BOOTP_BOOTFILESIZE)
 
-#define CONFIG_COMMANDS                (CONFIG_CMD_DFL | CFG_CMD_PING)
 
-/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
-#include <cmd_confdefs.h>
+/*
+ * Command line configuration.
+ */
+#include <config_cmd_default.h>
+
+#define CONFIG_CMD_PING
+
+
 
 #define CONFIG_ETHADDR         00:40:95:36:35:33
 #define CONFIG_NETMASK         255.255.255.0
@@ -89,7 +94,7 @@
 #define CONFIG_BOOTCOMMAND     "tftp 100000 uImage"
 /* #define CONFIG_BOOTARGS     "console=ttyS0,19200 initrd=0x100a0040,530K root=/dev/ram keepinitrd" */
 
-#if (CONFIG_COMMANDS & CFG_CMD_KGDB)
+#if defined(CONFIG_CMD_KGDB)
 #define CONFIG_KGDB_BAUDRATE   19200           /* speed to run kgdb serial port */
 #define CONFIG_KGDB_SER_INDEX  2               /* which serial port to use */
 #endif