$(obj)u-boot.img: $(obj)u-boot.bin
$(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
- -a $(TEXT_BASE) -e 0 \
+ -a $(CONFIG_SYS_TEXT_BASE) -e 0 \
-n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-d $< $@
$(obj)u-boot.imx: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(IMX_CONFIG) -T imximage \
- -e $(TEXT_BASE) -d $< $@
+ -e $(CONFIG_SYS_TEXT_BASE) -d $< $@
$(obj)u-boot.kwb: $(obj)u-boot.bin
$(obj)tools/mkimage -n $(KWD_CONFIG) -T kwbimage \
- -a $(TEXT_BASE) -e $(TEXT_BASE) -d $< $@
+ -a $(CONFIG_SYS_TEXT_BASE) -e $(TEXT_BASE) -d $< $@
$(obj)u-boot.sha1: $(obj)u-boot.bin
$(obj)tools/ubsha1 $(obj)u-boot.bin
@mkdir -p $(obj)board/digsy_mtc
@ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- echo "TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
+ echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/digsy_mtc/config.tmp
@[ -z "$(findstring RAMBOOT_,$@)" ] || \
- echo "TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
+ echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >$(obj)board/digsy_mtc/config.tmp
@$(MKCONFIG) -n $@ -a digsy_mtc powerpc mpc5xxx digsy_mtc
galaxy5200_LOWBOOT_config \
@mkdir -p $(obj)board/icecube
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
if [ "$(findstring DDR,$@)" ] ; \
- then echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
- else echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
+ then echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp ; \
+ else echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp ; \
fi
@[ -z "$(findstring LOWBOOT08,$@)" ] || \
- echo "TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
+ echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/icecube/config.tmp
@[ -z "$(findstring DDR,$@)" ] || \
echo "#define CONFIG_MPC5200_DDR" >>$(obj)include/config.h
@$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
@[ -z "$(findstring _PM_,$@)" ] || \
echo "#define CONFIG_LITE5200B_PM" >>$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- echo "TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
+ echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/icecube/config.tmp
@$(MKCONFIG) -n $@ -a IceCube powerpc mpc5xxx icecube
mcc200_config \
@mkdir -p $(obj)include
@mkdir -p $(obj)board/mcc200
@[ -z "$(findstring highboot,$@)" ] || \
- echo "TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
+ echo "CONFIG_SYS_TEXT_BASE = 0xFFF00000" >$(obj)board/mcc200/config.tmp
@[ -n "$(findstring _SDRAM,$@)" ] || \
if [ -n "$(findstring prs200,$@)" ]; \
then \
@mkdir -p $(obj)include $(obj)board/phytec/pcm030
@ >$(obj)include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- echo "TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
+ echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/phytec/pcm030/config.tmp
@$(MKCONFIG) -n $@ -a pcm030 powerpc mpc5xxx pcm030 phytec
PM520_config \
@[ -z "$(findstring Rev2_,$@)" ] || \
echo "#define CONFIG_TOTAL5200_REV 2" >>$(obj)include/config.h
@[ -z "$(findstring lowboot_,$@)" ] || \
- echo "TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
+ echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/total5200/config.tmp
@$(MKCONFIG) -n $@ -a Total5200 powerpc mpc5xxx total5200
cam5200_config \
echo "#define CONFIG_TQM5200_B" >>$(obj)include/config.h ; \
}
@[ -z "$(findstring HIGHBOOT,$@)" ] || \
- echo "TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
+ echo "CONFIG_SYS_TEXT_BASE = 0xFFF00000" >$(obj)board/tqm5200/config.tmp
@$(MKCONFIG) -n $@ -a TQM5200 powerpc mpc5xxx tqm5200 tqc
#########################################################################
@mkdir -p $(obj)include $(obj)board/amcc/acadia
@mkdir -p $(obj)nand_spl/board/amcc/acadia
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
+ @echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/acadia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a acadia powerpc ppc4xx acadia amcc
@mkdir -p $(obj)include $(obj)board/amcc/bamboo
@mkdir -p $(obj)nand_spl/board/amcc/bamboo
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
+ @echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/bamboo/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a bamboo powerpc ppc4xx bamboo amcc
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_nand_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
+ @echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/canyonlands/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a canyonlands powerpc ppc4xx canyonlands amcc
@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
> $(obj)board/avnet/fx12mm/config.tmp
- @echo "TEXT_BASE := 0xFFCB0000" \
+ @echo "CONFIG_SYS_TEXT_BASE := 0xFFCB0000" \
>> $(obj)board/avnet/fx12mm/config.tmp
@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
@mkdir -p $(obj)include $(obj)board/avnet/fx12mm
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
> $(obj)board/avnet/fx12mm/config.tmp
- @echo "TEXT_BASE := 0x03000000" \
+ @echo "CONFIG_SYS_TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/fx12mm/config.tmp
@$(MKCONFIG) fx12mm powerpc ppc4xx fx12mm avnet
@mkdir -p $(obj)include $(obj)board/amcc/kilauea
@mkdir -p $(obj)nand_spl/board/amcc/kilauea
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
- @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
+ @echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/kilauea/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a kilauea powerpc ppc4xx kilauea amcc
@mkdir -p $(obj)include $(obj)board/xilinx/ml507
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
> $(obj)board/xilinx/ml507/config.tmp
- @echo "TEXT_BASE := 0xFE360000" \
+ @echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ml507/config.tmp
@$(MKCONFIG) ml507 powerpc ppc4xx ml507 xilinx
@mkdir -p $(obj)include $(obj)board/xilinx/ml507
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
> $(obj)board/xilinx/ml507/config.tmp
- @echo "TEXT_BASE := 0x04000000" \
+ @echo "CONFIG_SYS_TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ml507/config.tmp
@$(MKCONFIG) $@ powerpc ppc4xx ml507 xilinx
@echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
+ @echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
@echo "#define CONFIG_SYS_RAMBOOT" > $(obj)include/config.h
@echo "#define CONFIG_$$(echo $(subst ,,$(@:_config=)) | \
tr '[:lower:]' '[:upper:]')" >> $(obj)include/config.h
- @echo "TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
+ @echo "CONFIG_SYS_TEXT_BASE = 0x01000000" > $(obj)board/amcc/sequoia/config.tmp
@echo "LDSCRIPT = board/amcc/sequoia/u-boot-ram.lds" >> \
$(obj)board/amcc/sequoia/config.tmp
@$(MKCONFIG) -n $@ -a sequoia powerpc ppc4xx sequoia amcc
@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
> $(obj)board/avnet/v5fx30teval/config.tmp
- @echo "TEXT_BASE := 0x03000000" \
+ @echo "CONFIG_SYS_TEXT_BASE := 0x03000000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
@$(MKCONFIG) $@ powerpc ppc4xx v5fx30teval avnet
@mkdir -p $(obj)include $(obj)board/avnet/v5fx30teval
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
> $(obj)board/avnet/v5fx30teval/config.tmp
- @echo "TEXT_BASE := 0xFF1C0000" \
+ @echo "CONFIG_SYS_TEXT_BASE := 0xFF1C0000" \
>> $(obj)board/avnet/v5fx30teval/config.tmp
@$(MKCONFIG) v5fx30teval powerpc ppc4xx v5fx30teval avnet
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-rom.lds"\
> $(obj)board/xilinx/ppc405-generic/config.tmp
- @echo "TEXT_BASE := 0xFE360000" \
+ @echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ppc405-generic/config.tmp
@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
@mkdir -p $(obj)include $(obj)board/xilinx/ppc405-generic
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc405-generic/u-boot-ram.lds"\
> $(obj)board/xilinx/ppc405-generic/config.tmp
- @echo "TEXT_BASE := 0x04000000" \
+ @echo "CONFIG_SYS_TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ppc405-generic/config.tmp
@$(MKCONFIG) xilinx-ppc405-generic powerpc ppc4xx ppc405-generic xilinx
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-rom.lds"\
> $(obj)board/xilinx/ppc440-generic/config.tmp
- @echo "TEXT_BASE := 0xFE360000" \
+ @echo "CONFIG_SYS_TEXT_BASE := 0xFE360000" \
>> $(obj)board/xilinx/ppc440-generic/config.tmp
@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
@mkdir -p $(obj)include $(obj)board/xilinx/ppc440-generic
@echo "LDSCRIPT:=$(SRCTREE)/board/xilinx/ppc440-generic/u-boot-ram.lds"\
> $(obj)board/xilinx/ppc440-generic/config.tmp
- @echo "TEXT_BASE := 0x04000000" \
+ @echo "CONFIG_SYS_TEXT_BASE := 0x04000000" \
>> $(obj)board/xilinx/ppc440-generic/config.tmp
@$(MKCONFIG) xilinx-ppc440-generic powerpc ppc4xx ppc440-generic xilinx
$(if $(findstring VR,$@), \
@echo "#define CONFIG_8260_CLKIN 66000000" >> $(obj)include/config.h))
@[ -z "$(findstring lowboot_,$@)" ] || \
- echo "TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
+ echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/freescale/mpc8260ads/config.tmp
@$(MKCONFIG) -n $@ -a MPC8260ADS powerpc mpc8260 mpc8260ads freescale
muas3001_dev_config \
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
- echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
fi; \
if [ "$(findstring _BIGFLASH_,$@)" ] ; then \
$(XECHO) "... with 32 MB Flash" ; \
echo "#define CONFIG_FLASH_32MB" >>$(obj)include/config.h ; \
- echo "TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x40000000" >$(obj)board/pm826/config.tmp ; \
else \
- echo "TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >$(obj)board/pm826/config.tmp ; \
fi; \
fi
@$(MKCONFIG) -n $@ -a PM826 powerpc mpc8260 pm826
fi
@if [ "$(findstring _ROMBOOT_,$@)" ] ; then \
echo "#define CONFIG_BOOT_ROM" >>$(obj)include/config.h ; \
- echo "TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0xFF800000" >$(obj)board/pm826/config.tmp ; \
fi
@$(MKCONFIG) -n $@ -a PM828 powerpc mpc8260 pm828
esac; \
if [ "$${FLASH}" = "SPANSION" ] ; then \
echo "#define CONFIG_SYS_SPANSION_BOOT" >> $(obj)include/config.h ; \
- echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m52277evb/config.tmp ; \
cp $(obj)board/freescale/m52277evb/u-boot.spa $(obj)board/freescale/m52277evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
- echo "TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x43E00000" > $(obj)board/freescale/m52277evb/config.tmp ; \
cp $(obj)board/freescale/m52277evb/u-boot.stm $(obj)board/freescale/m52277evb/u-boot.lds ; \
fi
@$(MKCONFIG) -n $@ -a M52277EVB m68k mcf5227x m52277evb freescale
esac; \
if [ "$${FLASH}" != "16" ] ; then \
echo "#define NORFLASH_PS32BIT 1" >> $(obj)include/config.h ; \
- echo "TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0xFFC00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.32 $(obj)board/freescale/m5235evb/u-boot.lds ; \
else \
- echo "TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000" > $(obj)board/freescale/m5235evb/config.tmp ; \
cp $(obj)board/freescale/m5235evb/u-boot.16 $(obj)board/freescale/m5235evb/u-boot.lds ; \
fi
@$(MKCONFIG) -n $@ -a M5235EVB m68k mcf523x m5235evb freescale
EB+MCF-EV123_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
- @echo "TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
+ @echo "CONFIG_SYS_TEXT_BASE = 0xFFE00000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
EB+MCF-EV123_internal_config : unconfig
@mkdir -p $(obj)include
@mkdir -p $(obj)board/BuS/EB+MCF-EV123
- @echo "TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
+ @echo "CONFIG_SYS_TEXT_BASE = 0xF0000000"|tee $(obj)board/BuS/EB+MCF-EV123/textbase.mk
@$(MKCONFIG) -n $@ EB+MCF-EV123 m68k mcf52x2 EB+MCF-EV123 BuS
M5329AFEE_config \
M54451EVB_stmicro_config) FLASH=STMICRO;; \
esac; \
if [ "$${FLASH}" = "NOR" ] ; then \
- echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.spa $(obj)board/freescale/m54451evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
- echo "TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x47E00000" > $(obj)board/freescale/m54451evb/config.tmp ; \
cp $(obj)board/freescale/m54451evb/u-boot.stm $(obj)board/freescale/m54451evb/u-boot.lds ; \
fi; \
echo "#define CONFIG_SYS_INPUT_CLKSRC 24000000" >> $(obj)include/config.h ;
esac; \
if [ "$${FLASH}" = "INTEL" ] ; then \
echo "#define CONFIG_SYS_INTEL_BOOT" >> $(obj)include/config.h ; \
- echo "TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x00000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.int $(obj)board/freescale/m54455evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "ATMEL" ] ; then \
echo "#define CONFIG_SYS_ATMEL_BOOT" >> $(obj)include/config.h ; \
- echo "TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x04000000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.atm $(obj)board/freescale/m54455evb/u-boot.lds ; \
fi; \
if [ "$${FLASH}" = "STMICRO" ] ; then \
echo "#define CONFIG_CF_SBF" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_STMICRO_BOOT" >> $(obj)include/config.h ; \
- echo "TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x4FE00000" > $(obj)board/freescale/m54455evb/config.tmp ; \
cp $(obj)board/freescale/m54455evb/u-boot.stm $(obj)board/freescale/m54455evb/u-boot.lds ; \
fi; \
echo "#define CONFIG_SYS_INPUT_CLKSRC $${FREQ}" >> $(obj)include/config.h ; \
echo "#define CONFIG_SYS_66MHZ" >>$(obj)include/config.h ; \
fi ; \
if [ "$(findstring _NAND_,$@)" ] ; then \
- echo "TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x00100000" > $(obj)board/freescale/mpc8313erdb/config.tmp ; \
echo "#define CONFIG_NAND_U_BOOT" >>$(obj)include/config.h ; \
fi ;
@if [ "$(findstring _NAND_,$@)" ] ; then \
@mkdir -p $(obj)board/freescale/mpc8349itx
@echo "#define CONFIG_$(subst _LOWBOOT,,$(@:_config=))" >> $(obj)include/config.h
@if [ "$(findstring GP,$@)" ] ; then \
- echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@if [ "$(findstring LOWBOOT,$@)" ] ; then \
- echo "TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0xFE000000" >$(obj)board/freescale/mpc8349itx/config.tmp ; \
fi
@$(MKCONFIG) -n $@ -a MPC8349ITX powerpc mpc83xx mpc8349itx freescale
@[ -z "$(findstring _bigflash,$@)" ] || \
{ echo "#define CONFIG_FLASH_16MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
- echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@[ -z "$(findstring _old,$@)" ] || \
{ echo "#define CONFIG_FLASH_8MB" >>$(obj)include/config.h ; \
echo "#define CONFIG_RAM_16MB" >>$(obj)include/config.h ; \
- echo "TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
+ echo "CONFIG_SYS_TEXT_BASE = 0x0CF40000" >$(obj)board/trab/config.tmp ; \
}
@$(MKCONFIG) -n $@ -a trab arm arm920t trab - s3c24x0
@echo "#define CONFIG_SH7785LCR 1" > $(obj)include/config.h
@if [ "$(findstring 32bit, $@)" ] ; then \
echo "#define CONFIG_SH_32BIT 1" >> $(obj)include/config.h ; \
- echo "TEXT_BASE = 0x8ff80000" > \
+ echo "CONFIG_SYS_TEXT_BASE = 0x8ff80000" > \
$(obj)board/renesas/sh7785lcr/config.tmp ; \
fi
@$(MKCONFIG) -n $@ -a sh7785lcr sh sh4 sh7785lcr renesas
- CONFIG_SYS_MONITOR_BASE:
Physical start address of boot monitor code (set by
make config files to be same as the text base address
- (TEXT_BASE) used when linking) - same as
+ (CONFIG_SYS_TEXT_BASE) used when linking) - same as
CONFIG_SYS_FLASH_BASE when booting from flash.
- CONFIG_SYS_MONITOR_LEN:
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
/*
* Below variable is very important because we use MMU in U-Boot.
/* Prepare to disable the MMU */
adr r2, mmu_disable_phys
- sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - TEXT_BASE)
+ sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE)
b mmu_disable
.align 5
/* Prepare to disable the MMU */
adr r2, mmu_disable_phys
- sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - TEXT_BASE)
+ sub r2, r2, #(CONFIG_SYS_PHY_UBOOT_BASE - CONFIG_SYS_TEXT_BASE)
b mmu_disable
.align 5
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
cmp r0, r1 /* don't reloc during debug */
beq stack_setup
-#if TEXT_BASE
+#if CONFIG_SYS_TEXT_BASE
#ifndef CONFIG_LPC2292 /* already done in lowlevel_init */
ldr r2, =0x0 /* Relocate the exception vectors */
cmp r1, r2 /* and associated data to address */
- ldmneia r0!, {r3-r10} /* 0x0. Do nothing if TEXT_BASE is */
+ ldmneia r0!, {r3-r10} /* 0x0. Do nothing if CONFIG_SYS_TEXT_BASE is */
stmneia r2!, {r3-r10} /* 0x0. Copy the first 15 words. */
ldmneia r0, {r3-r9}
stmneia r2, {r3-r9}
ldr r0, [r1, #+NETARM_MEM_CS0_BASE_ADDR]
ldr r1, =0xFFFFF000
and r0, r1, r0
- ldr r1, =(relocate-TEXT_BASE)
+ ldr r1, =(relocate-CONFIG_SYS_TEXT_BASE)
add r0, r1, r0
ldr r4, =NETARM_GEN_MODULE_BASE
ldr r1, =NETARM_GEN_SW_SVC_RESETA
_MTEXT_BASE:
#undef START_FROM_MEM
#ifdef START_FROM_MEM
- .word TEXT_BASE-PHYS_FLASH_1
+ .word CONFIG_SYS_TEXT_BASE-PHYS_FLASH_1
#else
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#endif
.globl lowlevel_init
_MTEXT_BASE:
#undef START_FROM_MEM
#ifdef START_FROM_MEM
- .word TEXT_BASE-PHYS_FLASH_1
+ .word CONFIG_SYS_TEXT_BASE-PHYS_FLASH_1
#else
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#endif
.globl lowlevel_init
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
#endif
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
.type lowlevel_init,function
ldr r0, =POS1 /* r0 = POS1 compile */
ldr r2, _TEXT_BASE
sub r0, r0, r2 /* r0 = POS1-_TEXT_BASE (POS1 relative) */
- sub r5, r5, r0 /* r0 = TEXT_BASE-1 */
+ sub r5, r5, r0 /* r0 = CONFIG_SYS_TEXT_BASE-1 */
sub r5, r5, #4 /* r1 = text base - current */
/* memory control configuration 1 */
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE /* address of _start in the linked image */
+ .word CONFIG_SYS_TEXT_BASE /* address of _start in the linked image */
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
#include <asm/arch/clocks_omap3.h>
_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
#if !defined(CONFIG_SYS_NAND_BOOT) && !defined(CONFIG_SYS_NAND_BOOT)
/**************************************************************************
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
.globl _TEXT_BASE
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
#if defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
.globl _armboot_start
re_end = (Elf32_Rel *)(rel_dyn_end + ((gd_t *)gdp)->load_off);
do {
- if (re_src->r_offset >= TEXT_BASE)
- if (*(Elf32_Addr *)(re_src->r_offset - rel_offset) >= TEXT_BASE)
+ if (re_src->r_offset >= CONFIG_SYS_TEXT_BASE)
+ if (*(Elf32_Addr *)(re_src->r_offset - rel_offset) >= CONFIG_SYS_TEXT_BASE)
*(Elf32_Addr *)(re_src->r_offset - rel_offset) -= rel_offset;
} while (re_src++ < re_end);
rte;
#if defined(CONFIG_CF_SBF)
-#define ASM_DRAMINIT (asm_dram_init - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
-#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
#endif
.text
asm_sbf_img_hdr:
.long 0x00000000 /* checksum, not yet implemented */
.long 0x00020000 /* image length */
- .long TEXT_BASE /* image to be relocated at */
+ .long CONFIG_SYS_TEXT_BASE /* image to be relocated at */
asm_dram_init:
move.l #(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_RAM_CTRL), %d0
jsr asm_dspi_rd_status
/* jump to memory and execute */
- move.l #(TEXT_BASE + 0x400), %a0
+ move.l #(CONFIG_SYS_TEXT_BASE + 0x400), %a0
move.l %a0, (%a1)
jmp (%a0)
/* Set vector base register at the beginning of the Flash */
#if defined(CONFIG_CF_SBF)
- move.l #TEXT_BASE, %d0
+ move.l #CONFIG_SYS_TEXT_BASE, %d0
movec %d0, %VBR
#else
move.l #CONFIG_SYS_FLASH_BASE, %d0
_vectors:
.long 0x00000000 /* Flash offset is 0 until we setup CS0 */
-#if defined(CONFIG_M5282) && (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
-.long _start - TEXT_BASE
+#if defined(CONFIG_M5282) && (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+.long _start - CONFIG_SYS_TEXT_BASE
#else
.long _START
#endif
#if defined(CONFIG_SYS_INT_FLASH_BASE) && \
(defined(CONFIG_M5282) || defined(CONFIG_M5281))
- #if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+ #if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
.long 0x55AA55AA,0xAA55AA55 /* CFM Backdoorkey */
.long 0xFFFFFFFF /* all sectors protected */
.long 0x00000000 /* supervisor/User restriction */
movec %d0, %RAMBAR1
#if defined(CONFIG_M5282)
-#if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
/* Setup code in SRAM to initialize FLASHBAR, if start from internal Flash */
move.l #(_flashbar_setup-CONFIG_SYS_INT_FLASH_BASE), %a0
/* Setup code to initialize FLASHBAR, if start from external Memory */
move.l #(CONFIG_SYS_INT_FLASH_BASE + CONFIG_SYS_INT_FLASH_ENABLE), %d0
movec %d0, %FLASHBAR
-#endif /* (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */
+#endif /* (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE) */
#endif
#endif
* therefore no VBR to set
*/
#if !defined(CONFIG_MONITOR_IS_IN_RAM)
-#if defined(CONFIG_M5282) && (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if defined(CONFIG_M5282) && (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
move.l #CONFIG_SYS_INT_FLASH_BASE, %d0
#else
move.l #CONFIG_SYS_FLASH_BASE, %d0
/* set parameters for board_init_r */
move.l %a0,-(%sp) /* dest_addr */
move.l %d0,-(%sp) /* gd */
-#if defined(DEBUG) && (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) && \
+#if defined(DEBUG) && (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE) && \
defined(CONFIG_SYS_HALT_BEFOR_RAM_JUMP)
halt
#endif
rte;
#if defined(CONFIG_CF_SBF)
-#define ASM_DRAMINIT (asm_dram_init - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
-#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_DRAMINIT (asm_dram_init - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
+#define ASM_SBF_IMG_HDR (asm_sbf_img_hdr - CONFIG_SYS_TEXT_BASE + CONFIG_SYS_INIT_RAM_ADDR)
#endif
.text
asm_sbf_img_hdr:
.long 0x00000000 /* checksum, not yet implemented */
.long 0x00030000 /* image length */
- .long TEXT_BASE /* image to be relocated at */
+ .long CONFIG_SYS_TEXT_BASE /* image to be relocated at */
asm_dram_init:
move.w #0x2700,%sr /* Mask off Interrupt */
jsr asm_dspi_rd_status
/* jump to memory and execute */
- move.l #(TEXT_BASE + 0x400), %a0
+ move.l #(CONFIG_SYS_TEXT_BASE + 0x400), %a0
jmp (%a0)
asm_dspi_wr_status:
shi r7, r0, 0x2
shi r6, r0, 0x6
/*
- * Copy U-Boot code to TEXT_BASE
+ * Copy U-Boot code to CONFIG_SYS_TEXT_BASE
* solve problem with sbrk_base
*/
-#if (CONFIG_SYS_RESET_ADDRESS != TEXT_BASE)
+#if (CONFIG_SYS_RESET_ADDRESS != CONFIG_SYS_TEXT_BASE)
addi r4, r0, __end
addi r5, r0, __text_start
rsub r4, r5, r4 /* size = __end - __text_start */
puts ("SDRAM :\n");
printf ("\t\tIcache:%s\n", icache_status() ? "ON" : "OFF");
printf ("\t\tDcache:%s\n", dcache_status() ? "ON" : "OFF");
- printf ("\tU-Boot Start:0x%08x\n", TEXT_BASE);
+ printf ("\tU-Boot Start:0x%08x\n", CONFIG_SYS_TEXT_BASE);
#if defined(CONFIG_CMD_FLASH)
puts ("FLASH: ");
beq 2b
/* Setup interrupt vectors */
- lis r1,TEXT_BASE@h
+ lis r1,CONFIG_SYS_TEXT_BASE@h
mtspr IVPR,r1
li r1,0x0100
lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@h
ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_4M)@l
- lis r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
+ lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE & 0xffc00000, (MAS2_I|MAS2_G))@l
/* The 85xx has the default boot window 0xff800000 - 0xffffffff */
lis r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
ori r9,r9,FSL_BOOKE_MAS3(0xffc00000, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
#else
/*
- * create a temp mapping in AS=1 to the 1M TEXT_BASE space, the main
- * image has been relocated to TEXT_BASE on the second stage.
+ * create a temp mapping in AS=1 to the 1M CONFIG_SYS_TEXT_BASE space, the main
+ * image has been relocated to CONFIG_SYS_TEXT_BASE on the second stage.
*/
lis r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@h
ori r7,r7,FSL_BOOKE_MAS1(1, 1, 0, 1, BOOKE_PAGESZ_1M)@l
- lis r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@h
- ori r8,r8,FSL_BOOKE_MAS2(TEXT_BASE, (MAS2_I|MAS2_G))@l
+ lis r8,FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, (MAS2_I|MAS2_G))@h
+ ori r8,r8,FSL_BOOKE_MAS2(CONFIG_SYS_TEXT_BASE, (MAS2_I|MAS2_G))@l
- lis r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
- ori r9,r9,FSL_BOOKE_MAS3(TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
+ lis r9,FSL_BOOKE_MAS3(CONFIG_SYS_TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@h
+ ori r9,r9,FSL_BOOKE_MAS3(CONFIG_SYS_TEXT_BASE, 0, (MAS3_SX|MAS3_SW|MAS3_SR))@l
#endif
mtspr MAS0,r6
stw r5, 0(r4) /* Store physical value of CCSR */
isync
- lis r5, TEXT_BASE@h
- ori r5,r5,TEXT_BASE@l
+ lis r5, CONFIG_SYS_TEXT_BASE@h
+ ori r5,r5,CONFIG_SYS_TEXT_BASE@l
lwz r5, 0(r5)
isync
# if defined(CONFIG_OXC) || defined(CONFIG_RMU)
/* flash mapped at end of memory map */
- bd->bi_flashoffset = TEXT_BASE + flash_size;
+ bd->bi_flashoffset = CONFIG_SYS_TEXT_BASE + flash_size;
# elif CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
bd->bi_flashoffset = monitor_flash_len; /* reserved area for startup monitor */
# endif
endif
PLATFORM_CPPFLAGS += -DCONFIG_SH -D__SH__
-PLATFORM_LDFLAGS += -e $(TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE)
+PLATFORM_LDFLAGS += -e $(CONFIG_SYS_TEXT_BASE) --defsym reloc_dst=$(TEXT_BASE)
LDSCRIPT := $(SRCTREE)/$(CPUDIR)/u-boot.lds
static int sh_mem_env_init(void)
{
- mem_malloc_init(TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE -
+ mem_malloc_init(CONFIG_SYS_TEXT_BASE - CONFIG_SYS_GBL_DATA_SIZE -
CONFIG_SYS_MALLOC_LEN, CONFIG_SYS_MALLOC_LEN - 16);
env_relocate();
jumptable_init();
include $(SRCTREE)/rules.mk
$(START): $(START:.o=.S)
- $(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
- -I$(TOPDIR)/include -fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \
+ $(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ \
+ -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) -I$(TOPDIR)/include \
+ -fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \
$(PLATFORM_CPPFLAGS) -Wall -Wstrict-prototypes \
-I$(TOPDIR)/board -c -o $(START) $(START:.o=.S)
#define PROM_SIZE_MASK (PROM_OFFS-1)
#define __va(x) ( \
(void *)( ((unsigned long)(x))-PROM_OFFS+ \
- (CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-TEXT_BASE ) \
+ (CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-CONFIG_SYS_TEXT_BASE ) \
)
-#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-TEXT_BASE))
+#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-CONFIG_SYS_TEXT_BASE))
struct property {
char *name;
WRITE_PAUSE
mov %l7, %o0 ! irq level
set handler_irq, %o1
- set (CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE), %o2
+ set (CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o2
add %o1, %o2, %o1
call %o1
add %sp, SF_REGS_SZ, %o1 ! pt_regs ptr
include $(SRCTREE)/rules.mk
$(START): $(START:.o=.S)
- $(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
- -I$(TOPDIR)/include -fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \
+ $(CC) -D__ASSEMBLY__ $(DBGFLAGS) $(OPTFLAGS) -D__KERNEL__ \
+ -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) -I$(TOPDIR)/include \
+ -fno-builtin -ffreestanding -nostdinc -isystem $(gccincdir) -pipe \
$(PLATFORM_CPPFLAGS) -Wall -Wstrict-prototypes \
-I$(TOPDIR)/board -c -o $(START) $(START:.o=.S)
#define PROM_SIZE_MASK (PROM_OFFS-1)
#define __va(x) ( \
(void *)( ((unsigned long)(x))-PROM_OFFS+ \
- (CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-TEXT_BASE ) \
+ (CONFIG_SYS_PROM_OFFSET-phys_base)+PAGE_OFFSET-CONFIG_SYS_TEXT_BASE ) \
)
-#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-TEXT_BASE))
+#define __phy(x) ((void *)(((unsigned long)(x))-PROM_OFFS+CONFIG_SYS_PROM_OFFSET-CONFIG_SYS_TEXT_BASE))
struct property {
char *name;
sethi %hi(0x00800000), %o0
lda [%g0] 2, %o1
and %o0, %o1, %o0
- sethi %hi(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE), %o1
- st %o0, [%lo(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE)+%o1]
+ sethi %hi(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o1
+ st %o0, [%lo(leon3_snooping_avail+CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)+%o1]
/* call relocate*/
nop
WRITE_PAUSE
mov %l7, %o0 ! irq level
set handler_irq, %o1
- set (CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE), %o2
+ set (CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE), %o2
add %o1, %o2, %o1
call %o1
add %sp, SF_REGS_SZ, %o1 ! pt_regs ptr
* c-code can be called.
*/
#define SAVE_ALL_HEAD \
- sethi %hi(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE)), %l4; \
- jmpl %l4 + %lo(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE)), %l6;
+ sethi %hi(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)), %l4; \
+ jmpl %l4 + %lo(trap_setup+(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE)), %l6;
#define SAVE_ALL \
SAVE_ALL_HEAD \
nop;
int checkboard (void)
{
puts ("Board: MCF-EV1 + MCF-EV23 (BuS Elektronik GmbH & Co. KG)\n");
-#if (TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_SYS_TEXT_BASE == CONFIG_SYS_INT_FLASH_BASE)
puts (" Boot from Internal FLASH\n");
#endif
#
sinclude $(OBJTREE)/board/$(BOARDDIR)/textbase.mk
-ifndef TEXT_BASE
-TEXT_BASE = 0xFE000000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFE000000
endif
-TEXT_BASE = 0xFFE00000
+CONFIG_SYS_TEXT_BASE = 0xFFE00000
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000
# ELPT860 board
#
-TEXT_BASE = 0x02000000
-#TEXT_BASE = 0x00FB0000
+CONFIG_SYS_TEXT_BASE = 0x02000000
+#CONFIG_SYS_TEXT_BASE = 0x00FB0000
# MA 02110-1301 USA
#
-TEXT_BASE = 0x00100000
+CONFIG_SYS_TEXT_BASE = 0x00100000
# EVB64360 boards
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
# EVB64460 boards
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
# MA 02110-1301 USA
#
-TEXT_BASE = 0x00600000
+CONFIG_SYS_TEXT_BASE = 0x00600000
KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
# MA 02110-1301 USA
#
-TEXT_BASE = 0x00600000
+CONFIG_SYS_TEXT_BASE = 0x00600000
# Kirkwood Boot Image configuration file
KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
# MA 02110-1301 USA
#
-TEXT_BASE = 0x00600000
+CONFIG_SYS_TEXT_BASE = 0x00600000
# Kirkwood Boot Image configuration file
KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
# MA 02110-1301 USA
#
-TEXT_BASE = 0x00600000
+CONFIG_SYS_TEXT_BASE = 0x00600000
# Kirkwood Boot Image configuration file
KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
# MA 02110-1301 USA
#
-TEXT_BASE = 0x00600000
+CONFIG_SYS_TEXT_BASE = 0x00600000
# Kirkwood Boot Image configuration file
KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
# MA 02111-1307 USA
#
-TEXT_BASE = 0xff000000
+CONFIG_SYS_TEXT_BASE = 0xff000000
# RPXlite boards
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
# RPXlite dw boards : lite_dw
#
-TEXT_BASE = 0xff000000
+CONFIG_SYS_TEXT_BASE = 0xff000000
# RedRock vision boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
# Artis A-3000 boards
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
-TEXT_BASE = 0x00e00000
+CONFIG_SYS_TEXT_BASE = 0x00e00000
# include NPE ethernet driver
BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
-TEXT_BASE = 0x00e00000
+CONFIG_SYS_TEXT_BASE = 0x00e00000
# include NPE ethernet driver
BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
-TEXT_BASE = 0x00e00000
+CONFIG_SYS_TEXT_BASE = 0x00e00000
# include NPE ethernet driver
BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
-TEXT_BASE = 0x00e00000
+CONFIG_SYS_TEXT_BASE = 0x00e00000
# include NPE ethernet driver
BOARDLIBS = arch/arm/cpu/ixp/npe/libnpe.a
#
# Analogue&Micro Adder boards family
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
-TEXT_BASE = 0x21f00000
+CONFIG_SYS_TEXT_BASE = 0x21f00000
# alaska board
#
-TEXT_BASE = 0xfff00000
-# TEXT_BASE = 0x00100000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
#
# we get text_base from board config header, so do not use this
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFF80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
endif
ifeq ($(debug),1)
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFFA0000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFFA0000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFF80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFFE0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# AMCC 440SPe Evaluation (Katmai) board
#
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
PLATFORM_CPPFLAGS += -DCONFIG_440=1
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFFA0000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
endif
ifeq ($(debug),1)
# esd ADCIOP boards
#
-#TEXT_BASE = 0x00001000
+#CONFIG_SYS_TEXT_BASE = 0x00001000
ifeq ($(ramsym),1)
-TEXT_BASE = 0xFBD00000
+CONFIG_SYS_TEXT_BASE = 0xFBD00000
else
-TEXT_BASE = 0xFFFB0000
+CONFIG_SYS_TEXT_BASE = 0xFFFB0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
# AMCC 440GX Reference Platform (Ocotea) board
#
-#TEXT_BASE = 0xFFFE0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
#
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xfffb0000
+CONFIG_SYS_TEXT_BASE = 0xfffb0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFF80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# AMCC 440GX Reference Platform (Taishan) board
#
-#TEXT_BASE = 0xFFFE0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# esd ADCIOP boards
#
-#TEXT_BASE = 0x00001000
+#CONFIG_SYS_TEXT_BASE = 0x00001000
ifeq ($(ramsym),1)
-TEXT_BASE = 0xFBD00000
+CONFIG_SYS_TEXT_BASE = 0xFBD00000
else
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
#
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xfffb0000
+CONFIG_SYS_TEXT_BASE = 0xfffb0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# Start at bottom of RAM, but at an aliased address so that it looks
# like it's not in RAM. This is a bit of voodoo to allow it to be
# run from RAM instead of Flash.
-TEXT_BASE = 0x08000000
+CONFIG_SYS_TEXT_BASE = 0x08000000
# Use board specific linker script
LDSCRIPT := $(SRCTREE)/board/amirix/ap1000/u-boot.lds
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x83e80000
+CONFIG_SYS_TEXT_BASE = 0x83e80000
# Used with full SRAM boot.
# This is either with a GP system or a signed boot image.
# easiest, and safest way to go if you can.
-#TEXT_BASE = 0x40270000
+#CONFIG_SYS_TEXT_BASE = 0x40270000
# Handy to get symbols to debug ROM version.
-#TEXT_BASE = 0x0
-#TEXT_BASE = 0x08000000
+#CONFIG_SYS_TEXT_BASE = 0x0
+#CONFIG_SYS_TEXT_BASE = 0x08000000
#define SDRAM_BASE_ADDRESS 0x80008000
_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
.globl lowlevel_init
lowlevel_init:
#
#address where u-boot will be relocated
-TEXT_BASE = 0xc0f80000
+CONFIG_SYS_TEXT_BASE = 0xc0f80000
# image should be loaded at 0x01000000
#
-TEXT_BASE = 0x01000000
+CONFIG_SYS_TEXT_BASE = 0x01000000
# image should be loaded at 0x01000000
#
-TEXT_BASE = 0x01000000
+CONFIG_SYS_TEXT_BASE = 0x01000000
# The Intel Assabet 1 bank of 32 MiB SDRAM
#
-TEXT_BASE = 0xc1f00000
+CONFIG_SYS_TEXT_BASE = 0xc1f00000
# MA 02111-1307 USA
#
-TEXT_BASE = $(CONFIG_TEXT_BASE)
-
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# in RAM where U-Boot is loaded at for debugging.
#
-TEXT_BASE := 0xFF000000
+CONFIG_SYS_TEXT_BASE := 0xFF000000
# RAM version
-#TEXT_BASE := 0x100000
+#CONFIG_SYS_TEXT_BASE := 0x100000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
-TEXT_BASE = 0x73000000
+CONFIG_SYS_TEXT_BASE = 0x73000000
-TEXT_BASE = 0x21f00000
+CONFIG_SYS_TEXT_BASE = 0x21f00000
-TEXT_BASE = 0x21f00000
+CONFIG_SYS_TEXT_BASE = 0x21f00000
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000
-TEXT_BASE = 0x73f00000
+CONFIG_SYS_TEXT_BASE = 0x73f00000
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
PLATFORM_LDFLAGS += --gc-sections
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
PLATFORM_LDFLAGS += --gc-sections
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
LDSCRIPT = $(src)board/atmel/atstk1000/u-boot.lds
#
# atum8548 board
-# TEXT_BASE = 0xfff80000
-# TEXT_BASE = 0xfffff000
-ifndef TEXT_BASE
-TEXT_BASE = 0xfff80000
+# CONFIG_SYS_TEXT_BASE = 0xfff80000
+# CONFIG_SYS_TEXT_BASE = 0xfffff000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xfff80000
endif
# Barco Hydra/SCN boards
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
#
# BC3450 board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFC000000 boot low (standard configuration with room for max 64 MByte
# Flash ROM)
# 0x00100000 boot from RAM (for testing only)
#
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot low
-TEXT_BASE = 0xFC000000
+CONFIG_SYS_TEXT_BASE = 0xFC000000
## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf536-0.3
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf518-0.0
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf526-0.0
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf527-0.2
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf527-0.0
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf527-0.2
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf533-0.3
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf533-0.3
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf537-0.2
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf537-0.2
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf537-0.2
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf537-0.2
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf538-0.4
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf548-0.0
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf561-0.5
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf561-0.3
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf532-0.5
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf561-0.5
# CU824 board
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
# NOTE: The flags below affect how the BCM570x driver is compiled
PLATFORM_CPPFLAGS += -DEMBEDDED -DBIG_ENDIAN_HOST -DINCLUDE_5701_AX_FIX=1\
-DDBG=0 -DT3_JUMBO_RCV_RCB_ENTRY_COUNT=256\
- -DTEXT_BASE=$(TEXT_BASE)
+ -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# TTTech C2MON boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000
#
# CANMB board
#
-# allowed and functional TEXT_BASE values:
+# allowed and functional CONFIG_SYS_TEXT_BASE values:
#
# 0xfe000000 low boot at 0x00000100 (default board setting)
# 0x00100000 RAM load and test
#
-TEXT_BASE = 0xFE000000
-#TEXT_BASE = 0x00100000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
+#CONFIG_SYS_TEXT_BASE = 0x00100000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# Cerf board with PXA250 cpu
#
#
-TEXT_BASE = 0xa3080000
+CONFIG_SYS_TEXT_BASE = 0xa3080000
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf527-0.0
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf533-0.3
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf537-0.2
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf537-0.2
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf548-0.0
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf561-0.3
-TEXT_BASE = 0x00f00000
+CONFIG_SYS_TEXT_BASE = 0x00f00000
-TEXT_BASE = 0x00f00000
+CONFIG_SYS_TEXT_BASE = 0x00f00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xfc000000
+CONFIG_SYS_TEXT_BASE = 0xfc000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
-TEXT_BASE = 0x20F00000
+CONFIG_SYS_TEXT_BASE = 0x20F00000
## For testing: load at 0x20100000 and "go" at 0x201000A4
-#TEXT_BASE = 0x20100000
+#CONFIG_SYS_TEXT_BASE = 0x20100000
#
# Boot from flash at location 0x00000000
-TEXT_BASE = 0x02000000
+CONFIG_SYS_TEXT_BASE = 0x02000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
# MA 02111-1307 USA
#
-TEXT_BASE = 0xffe00000
+CONFIG_SYS_TEXT_BASE = 0xffe00000
8xx SMC ports, and set CONFIG_8xx_CONS_{SMC1,SMC2,NONE} accordingly
(NONE means use Cogent motherboard serial port A).
-Then edit the file "cogent/config.mk". Firstly, set TEXT_BASE to be
+Then edit the file "cogent/config.mk". Firstly, set CONFIG_SYS_TEXT_BASE to be
the base address of the EPROM for the CPU module. This should be the
same as the value selected for CONFIG_SYS_MONITOR_BASE in
"include/config_cogent_*.h" (in fact, I have made this automatic via
-the -DTEXT_BASE=... option in CPPFLAGS).
+the -CONFIG_SYS_TEXT_BASE=... option in CPPFLAGS).
Finally, set the values of the make variables $(CMA_MB) and $(CMA_IOMS).
#
# Boot EPROM location
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
LDSCRIPT := $(SRCTREE)/board/cogent/u-boot.lds
-TEXT_BASE = 0xa1000000
+CONFIG_SYS_TEXT_BASE = 0xa1000000
ifeq ($(CONFIG_BOOT_ROM),y)
- TEXT_BASE := 0xFFF00000
+ CONFIG_SYS_TEXT_BASE := 0xFFF00000
PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
else
- TEXT_BASE := 0xFFF00000
+ CONFIG_SYS_TEXT_BASE := 0xFFF00000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
#
ifeq ($(CONFIG_BOOT_ROM),y)
- TEXT_BASE := 0xFF800000
+ CONFIG_SYS_TEXT_BASE := 0xFF800000
PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
else
- TEXT_BASE := 0xFF000000
+ CONFIG_SYS_TEXT_BASE := 0xFF000000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
#
ifeq ($(CONFIG_BOOT_ROM),y)
- TEXT_BASE := 0xFF800000
+ CONFIG_SYS_TEXT_BASE := 0xFF800000
PLATFORM_CPPFLAGS += -DCONFIG_BOOT_ROM
else
- TEXT_BASE := 0xFF000000
+ CONFIG_SYS_TEXT_BASE := 0xFF000000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
-TEXT_BASE = 0xa0f80000
-#TEXT_BASE = 0
+CONFIG_SYS_TEXT_BASE = 0xa0f80000
+#CONFIG_SYS_TEXT_BASE = 0
# Note: I make an "image" from U-Boot itself, which prefixes 0x40 bytes of
# header info, hence start address is thus shifted.
-TEXT_BASE = 0xFFFD0040
+CONFIG_SYS_TEXT_BASE = 0xFFFD0040
#
# This is the address where U-Boot lives in flash:
-#TEXT_BASE = 0
+#CONFIG_SYS_TEXT_BASE = 0
# FIXME: armboot does only work correctly when being compiled
# for the addresses _after_ relocation to RAM!! Otherwhise the
# .bss segment is assumed in flash...
-TEXT_BASE = 0xa1fe0000
+CONFIG_SYS_TEXT_BASE = 0xa1fe0000
.endm
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
/*
LDFLAGS += $(LINKER_UNDEFS)
-TEXT_BASE := 0xFFFC0000
-#TEXT_BASE := 0x00100000
+CONFIG_SYS_TEXT_BASE := 0xFFFC0000
+#CONFIG_SYS_TEXT_BASE := 0x00100000
PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS)
LDFLAGS += $(LINKER_UNDEFS)
-TEXT_BASE := 0xFFFC0000
-#TEXT_BASE := 0x00100000
+CONFIG_SYS_TEXT_BASE := 0xFFFC0000
+#CONFIG_SYS_TEXT_BASE := 0x00100000
PLATFORM_RELFLAGS := $(PLATFORM_RELFLAGS)
-TEXT_BASE = 0x23fc0000
+CONFIG_SYS_TEXT_BASE = 0x23fc0000
# CU824 board
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# MA 02111-1307 USA
#
-TEXT_BASE = 0x0C100000
+CONFIG_SYS_TEXT_BASE = 0x0C100000
PLATFORM_CPPFLAGS += -Uarm
#
# Reserve 256 kB for Monitor
-#TEXT_BASE = 0xFFFC0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# Reserve 320 kB for Monitor
-TEXT_BASE = 0xFFFB0000
+CONFIG_SYS_TEXT_BASE = 0xFFFB0000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-TEXT_BASE = 0xa0000000
+CONFIG_SYS_TEXT_BASE = 0xa0000000
# PLATFORM_CPPFLAGS += -DDEBUG
#Provide at least 16MB spacing between us and the Linux Kernel image
-TEXT_BASE = 0xC1080000
+CONFIG_SYS_TEXT_BASE = 0xC1080000
#
#Provide at least 16MB spacing between us and the Linux Kernel image
-TEXT_BASE = 0x81080000
+CONFIG_SYS_TEXT_BASE = 0x81080000
#
#Provide at least 16MB spacing between us and the Linux Kernel image
-TEXT_BASE = 0x81080000
+CONFIG_SYS_TEXT_BASE = 0x81080000
#
#Provide at least 16MB spacing between us and the Linux Kernel image
-TEXT_BASE = 0x81080000
+CONFIG_SYS_TEXT_BASE = 0x81080000
#Provide at least 16MB spacing between us and the Linux Kernel image
-TEXT_BASE = 0x81080000
+CONFIG_SYS_TEXT_BASE = 0x81080000
#
#Provide at least 16MB spacing between us and the Linux Kernel image
-TEXT_BASE = 0x81080000
+CONFIG_SYS_TEXT_BASE = 0x81080000
#
#Provide at least 16MB spacing between us and the Linux Kernel image
-TEXT_BASE = 0x81080000
+CONFIG_SYS_TEXT_BASE = 0x81080000
#
# we load ourself to 8400'0000 to provide at least 32MB spacing
# between us and the Integrity kernel image
-TEXT_BASE = 0x84000000
+CONFIG_SYS_TEXT_BASE = 0x84000000
#
#Provide at least 16MB spacing between us and the Linux Kernel image
-TEXT_BASE = 0x81080000
+CONFIG_SYS_TEXT_BASE = 0x81080000
NOTE! When you switch between the two boot flashes, the
base addresses will be swapped.
-Have this in mind when you compile u-boot. TEXT_BASE has
+Have this in mind when you compile u-boot. CONFIG_SYS_TEXT_BASE has
to match the address where u-boot is located when you
actually launch.
#
# ROM version
-TEXT_BASE = 0xbfc00000
+CONFIG_SYS_TEXT_BASE = 0xbfc00000
# RAM version
-#TEXT_BASE = 0x80100000
+#CONFIG_SYS_TEXT_BASE = 0x80100000
-TEXT_BASE = 0x83008000
+CONFIG_SYS_TEXT_BASE = 0x83008000
#
# digsyMTC board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFF00000 boot high (standard configuration)
# 0xFE000000 boot low
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# we load ourself to c1f8'0000, the upper 1 MB of the first (only) bank
#
-TEXT_BASE = 0xc1f80000
+CONFIG_SYS_TEXT_BASE = 0xc1f80000
# MA 02111-1307 USA
#
-TEXT_BASE = 0x06000000
+CONFIG_SYS_TEXT_BASE = 0x06000000
CFLAGS_common/dlmalloc.o += -Wa,--no-warn -fno-strict-aliasing
PLATFORM_RELFLAGS += -fvisibility=hidden
PLATFORM_CPPFLAGS += -fno-dwarf2-cfi-asm
# Sandpoint boards
#
-#TEXT_BASE = 0x00090000
-TEXT_BASE = 0xFFF00000
+#CONFIG_SYS_TEXT_BASE = 0x00090000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
PLATFORM_LDFLAGS += --gc-sections
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
LDSCRIPT = $(src)board/earthlcd/favr-32-ezkit/u-boot.lds
LDSCRIPT := $(SRCTREE)/arch/arm/cpu/arm920t/ep93xx/u-boot.lds
ifdef CONFIG_EDB9301
-TEXT_BASE = 0x05700000
+CONFIG_SYS_TEXT_BASE = 0x05700000
endif
ifdef CONFIG_EDB9302
-TEXT_BASE = 0x05700000
+CONFIG_SYS_TEXT_BASE = 0x05700000
endif
ifdef CONFIG_EDB9302A
-TEXT_BASE = 0xc5700000
+CONFIG_SYS_TEXT_BASE = 0xc5700000
endif
ifdef CONFIG_EDB9307
-TEXT_BASE = 0x01f00000
+CONFIG_SYS_TEXT_BASE = 0x01f00000
endif
ifdef CONFIG_EDB9307A
-TEXT_BASE = 0xc1f00000
+CONFIG_SYS_TEXT_BASE = 0xc1f00000
endif
ifdef CONFIG_EDB9312
-TEXT_BASE = 0x01f00000
+CONFIG_SYS_TEXT_BASE = 0x01f00000
endif
ifdef CONFIG_EDB9315
-TEXT_BASE = 0x01f00000
+CONFIG_SYS_TEXT_BASE = 0x01f00000
endif
ifdef CONFIG_EDB9315A
-TEXT_BASE = 0xc1f00000
+CONFIG_SYS_TEXT_BASE = 0xc1f00000
endif
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# MHPC boards
#
-TEXT_BASE = 0xfe000000
-/*TEXT_BASE = 0x00200000 */
+CONFIG_SYS_TEXT_BASE = 0xfe000000
+/*CONFIG_SYS_TEXT_BASE = 0x00200000 */
#
# TOP5200 board, on optional MINI5200 and EVAL5200 boards
#
-# allowed and functional TEXT_BASE values:
+# allowed and functional CONFIG_SYS_TEXT_BASE values:
#
# 0xff000000 low boot at 0x00000100 (default board setting)
# 0xfff00000 high boot at 0xfff00100 (board needs modification)
# 0x00100000 RAM load and test
#
-TEXT_BASE = 0xff000000
-#TEXT_BASE = 0xfff00000
-#TEXT_BASE = 0x00100000
+CONFIG_SYS_TEXT_BASE = 0xff000000
+#CONFIG_SYS_TEXT_BASE = 0xfff00000
+#CONFIG_SYS_TEXT_BASE = 0x00100000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# TOP860 board
#
-TEXT_BASE = 0x80000000
+CONFIG_SYS_TEXT_BASE = 0x80000000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xc0f80000
+CONFIG_SYS_TEXT_BASE = 0xc0f80000
# EP82xx series boards by Embedded Planet
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
# for the "final" configuration, with U-Boot in flash, or the address
# in RAM where U-Boot is loaded at for debugging.
#
-#TEXT_BASE = 0x00100000
-#TEXT_BASE = 0xFF000000
-TEXT_BASE = 0xFFF00000
+#CONFIG_SYS_TEXT_BASE = 0x00100000
+#CONFIG_SYS_TEXT_BASE = 0xFF000000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
# EP82xxM series boards by Embedded Planet
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
#
# Embedded Planet EP88x boards
#
-TEXT_BASE = 0xFC000000
+CONFIG_SYS_TEXT_BASE = 0xFC000000
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFF80000
-TEXT_BASE = 0xFFFC0000
+#CONFIG_SYS_TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
#
# FLASH:
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFFD0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
+CONFIG_SYS_TEXT_BASE = 0xFFFD0000
# SDRAM:
-#TEXT_BASE = 0x00FE0000
+#CONFIG_SYS_TEXT_BASE = 0x00FE0000
# esd ABG405 boards
#
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
# esd ASH405 boards
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC8000
+CONFIG_SYS_TEXT_BASE = 0xFFFC8000
# esd CPCI2DP board
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
#
# IceCube board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFF00000 boot high (standard configuration)
# 0xFF000000 boot low for 16 MiB boards
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# cpci750 board
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
# esd CPCIISER4 boards
#
-#TEXT_BASE = 0xFFFE0000
-#TEXT_BASE = 0xFFFD0000
-TEXT_BASE = 0xFFFC0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFD0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# Use board specific linker script
LDSCRIPT := $(SRCTREE)/board/esd/dasa_sim/u-boot.lds
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFD0000
+CONFIG_SYS_TEXT_BASE = 0xFFFD0000
# esd CPCIISER4 boards
#
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFFD0000
-#TEXT_BASE = 0xFFFC0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
+CONFIG_SYS_TEXT_BASE = 0xFFFD0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFC0000
#
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFFA0000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# esd VOH405 boards
#
-#TEXT_BASE = 0xFFF00000
-TEXT_BASE = 0xFFF80000
-#TEXT_BASE = 0xFFFC0000
-#TEXT_BASE = 0x00FC0000
+#CONFIG_SYS_TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
+#CONFIG_SYS_TEXT_BASE = 0xFFFC0000
+#CONFIG_SYS_TEXT_BASE = 0x00FC0000
# esd HUB405 boards
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
#
# IceCube board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFF00000 boot high (standard configuration)
# 0xFF000000 boot low for 16 MiB boards
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
-TEXT_BASE = 0x21f00000
+CONFIG_SYS_TEXT_BASE = 0x21f00000
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFFD0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
+CONFIG_SYS_TEXT_BASE = 0xFFFD0000
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFFD0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
+CONFIG_SYS_TEXT_BASE = 0xFFFD0000
#
# IceCube board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFF00000 boot high (standard configuration)
# 0xFF000000 boot low for 16 MiB boards
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# esd PLU405 boards
#
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
#
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFF90000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFF90000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# MA 02111-1307 USA
#
-TEXT_BASE = 0xffc00000
+CONFIG_SYS_TEXT_BASE = 0xffc00000
# VME8349E
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
# esd VOH405 boards
#
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC8000
+CONFIG_SYS_TEXT_BASE = 0xFFFC8000
# esd ASH405 boards
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
#
# board/espt/config.mk
#
-# TEXT_BASE refers to image _after_ relocation.
+# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x8FFC0000
+CONFIG_SYS_TEXT_BASE = 0x8FFC0000
# TQM8xxL boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
# Debris boards
#
-#TEXT_BASE = 0x00090000
-TEXT_BASE = 0xFFF00000
+#CONFIG_SYS_TEXT_BASE = 0x00090000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# KVME080 board
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# ETX_094 Boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
-TEXT_BASE = 0x21f00000
+CONFIG_SYS_TEXT_BASE = 0x21f00000
-TEXT_BASE = 0x21F00000
+CONFIG_SYS_TEXT_BASE = 0x21F00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0x007d0000
+CONFIG_SYS_TEXT_BASE = 0x007d0000
# EVB64260 boards
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
# MPC885ADS boards
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/fads
HOSTCFLAGS += -I$(TOPDIR)/board/fads
HOST_ENVIRO_CFLAGS += -I$(TOPDIR)/board/fads
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */
#ifdef CONFIG_BZIP2
#
# download area is 1200'0000
-TEXT_BASE = 0x13f80000
+CONFIG_SYS_TEXT_BASE = 0x13f80000
# TQM8xxL boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
#
# P4080DS board
#
-ifndef TEXT_BASE
-TEXT_BASE = 0xeff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xeff80000
endif
RESET_VECTOR_ADDRESS = 0xeffffffc
# MA 02111-1307 USA
#
-TEXT_BASE = 0
+CONFIG_SYS_TEXT_BASE = 0
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# MA 02111-1307 USA
#
-/*TEXT_BASE = 0xFFC00000*/
+/*CONFIG_SYS_TEXT_BASE = 0xFFC00000*/
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
\ No newline at end of file
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# MA 02111-1307 USA
#
-TEXT_BASE = 0xffe00000
+CONFIG_SYS_TEXT_BASE = 0xffe00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFF800000
+CONFIG_SYS_TEXT_BASE = 0xFF800000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xffe00000
+CONFIG_SYS_TEXT_BASE = 0xffe00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xffe00000
+CONFIG_SYS_TEXT_BASE = 0xffe00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xffe00000
+CONFIG_SYS_TEXT_BASE = 0xffe00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xffe00000
+CONFIG_SYS_TEXT_BASE = 0xffe00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFE00000
+CONFIG_SYS_TEXT_BASE = 0xFFE00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0
+CONFIG_SYS_TEXT_BASE = 0
# MA 02111-1307 USA
#
-TEXT_BASE = 0
+CONFIG_SYS_TEXT_BASE = 0
# MA 02111-1307 USA
#
-TEXT_BASE = 0
+CONFIG_SYS_TEXT_BASE = 0
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFF800000
+CONFIG_SYS_TEXT_BASE = 0xFF800000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFF800000
+CONFIG_SYS_TEXT_BASE = 0xFF800000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
#
# Flash address
-TEXT_BASE = 0xFF000000
+CONFIG_SYS_TEXT_BASE = 0xFF000000
# RAM address
-#TEXT_BASE = 0x00400000
+#CONFIG_SYS_TEXT_BASE = 0x00400000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -maltivec -mabi=altivec -msoft-float
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -maltivec -mabi=altivec -msoft-float
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
endif
# mpc8260ads board
#
-TEXT_BASE = 0xfe000000
+CONFIG_SYS_TEXT_BASE = 0xfe000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
endif
-ifndef TEXT_BASE
-TEXT_BASE = 0xFE000000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFE000000
endif
ifndef NAND_SPL
ifeq ($(CONFIG_NAND), y)
-TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+CONFIG_SYS_TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
endif
endif
-ifndef TEXT_BASE
-TEXT_BASE = 0xFE000000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFE000000
endif
# MPC8323ERDB
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
# MPC832XEMDS
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
# MPC8349EMDS
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFEF00000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFEF00000
endif
# MPC8360EMDS
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
# MPC8360ERDK
#
-TEXT_BASE = 0xFF800000
+CONFIG_SYS_TEXT_BASE = 0xFF800000
# MPC837xEMDS
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
# MPC837xERDB
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
#
ifndef NAND_SPL
ifeq ($(CONFIG_NAND), y)
-TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+CONFIG_SYS_TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
endif
endif
ifeq ($(CONFIG_SDCARD), y)
-TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+CONFIG_SYS_TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
RESET_VECTOR_ADDRESS = 0xf8fffffc
endif
ifeq ($(CONFIG_SPIFLASH), y)
-TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+CONFIG_SYS_TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
RESET_VECTOR_ADDRESS = 0xf8fffffc
endif
-ifndef TEXT_BASE
-TEXT_BASE = 0xeff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xeff80000
endif
ifndef RESET_VECTOR_ADDRESS
# default CCARBAR is at 0xff700000
# assume U-Boot is less than 0.5MB
#
-TEXT_BASE = 0xfff80000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
#
# mpc8541cds board
#
-TEXT_BASE = 0xfff80000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
#
# mpc8544ds board
#
-ifndef TEXT_BASE
-TEXT_BASE = 0xfff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xfff80000
endif
#
# mpc8548cds board
#
-ifndef TEXT_BASE
-TEXT_BASE = 0xfff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xfff80000
endif
#
# mpc8555cds board
#
-TEXT_BASE = 0xfff80000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
# default CCARBAR is at 0xff700000
# assume U-Boot is less than 0.5MB
#
-TEXT_BASE = 0xfff80000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
#
# mpc8568mds board
#
-TEXT_BASE = 0xfff80000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
#
ifndef NAND_SPL
ifeq ($(CONFIG_NAND), y)
-TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+CONFIG_SYS_TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
endif
endif
-ifndef TEXT_BASE
-TEXT_BASE = 0xfff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xfff80000
endif
#
# mpc8572ds board
#
-ifndef TEXT_BASE
-TEXT_BASE = 0xeff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xeff80000
endif
RESET_VECTOR_ADDRESS = 0xeffffffc
# MA 02111-1307 USA
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
# default CCSRBAR is at 0xff700000
# assume U-Boot is less than 0.5MB
#
-TEXT_BASE = 0xeff00000
+CONFIG_SYS_TEXT_BASE = 0xeff00000
-TEXT_BASE = 0x87f00000
+CONFIG_SYS_TEXT_BASE = 0x87f00000
LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds
ifdef CONFIG_NAND_SPL
-TEXT_BASE = 0x87ec0000
+CONFIG_SYS_TEXT_BASE = 0x87ec0000
else
-TEXT_BASE = 0x87f00000
+CONFIG_SYS_TEXT_BASE = 0x87f00000
endif
#
LDSCRIPT = $(CPUDIR)/$(SOC)/u-boot.lds
-TEXT_BASE = 0x97800000
+CONFIG_SYS_TEXT_BASE = 0x97800000
IMX_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/imximage.cfg
ALL += $(obj)u-boot.imx
# any later version.
#
-ifndef TEXT_BASE
-TEXT_BASE = 0xeff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xeff80000
endif
RESET_VECTOR_ADDRESS = 0xeffffffc
ifndef NAND_SPL
ifeq ($(CONFIG_NAND), y)
-TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+CONFIG_SYS_TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
LDSCRIPT := $(TOPDIR)/$(CPUDIR)/u-boot-nand.lds
endif
endif
ifeq ($(CONFIG_SDCARD), y)
-TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+CONFIG_SYS_TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
RESET_VECTOR_ADDRESS = 0xf8fffffc
endif
ifeq ($(CONFIG_SPIFLASH), y)
-TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
+CONFIG_SYS_TEXT_BASE = $(CONFIG_RAMBOOT_TEXT_BASE)
RESET_VECTOR_ADDRESS = 0xf8fffffc
endif
-ifndef TEXT_BASE
-TEXT_BASE = 0xeff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xeff80000
endif
ifndef RESET_VECTOR_ADDRESS
#
# p2020ds board
#
-ifndef TEXT_BASE
-TEXT_BASE = 0xeff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xeff80000
endif
RESET_VECTOR_ADDRESS = 0xeffffffc
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
# esd PLU405 boards
#
-TEXT_BASE = 0xFFFC0000
-#TEXT_BASE = 0x00FC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
+#CONFIG_SYS_TEXT_BASE = 0x00FC0000
#
# U-BOOT IN FLASH
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
# U-BOOT IN RAM or SDRAM with -nosram flag set when starting GRMON
-#TEXT_BASE = 0x40000000
+#CONFIG_SYS_TEXT_BASE = 0x40000000
# U-BOOT IN SDRAM
-#TEXT_BASE = 0x60000000
+#CONFIG_SYS_TEXT_BASE = 0x60000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
#
# U-BOOT IN FLASH
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
# U-BOOT IN SDRAM
-#TEXT_BASE = 0x40000000
+#CONFIG_SYS_TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
#
# U-BOOT IN FLASH
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
# U-BOOT IN RAM
-#TEXT_BASE = 0x40000000
+#CONFIG_SYS_TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
#
# U-BOOT IN FLASH
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
# U-BOOT IN RAM
-#TEXT_BASE = 0x40000000
+#CONFIG_SYS_TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
#
# RUN U-BOOT FROM PROM
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
# RUN U-BOOT FROM RAM
-#TEXT_BASE = 0x40000000
+#CONFIG_SYS_TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
#
# galaxy5200 board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFF00000 boot high (standard configuration)
# 0xFE000000 boot low
sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
ifdef CONFIG_galaxy5200_LOWBOOT
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
endif
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# bootp;tftp;bootm, repeat, etc.,.
#
-TEXT_BASE = 0xc8f00000
+CONFIG_SYS_TEXT_BASE = 0xc8f00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# G&D 440EP/GR ETX-Module
#
-#TEXT_BASE = 0x00001000
+#CONFIG_SYS_TEXT_BASE = 0x00001000
ifeq ($(ramsym),1)
-TEXT_BASE = 0xFBD00000
+CONFIG_SYS_TEXT_BASE = 0xFBD00000
else
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFFA0000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# FLASH base address for GEN860T board
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
# MA 02111-1307 USA
#
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data
#
ifeq ($(TBASE),0)
-TEXT_BASE = 0
+CONFIG_SYS_TEXT_BASE = 0
else
ifeq ($(TBASE),1)
-TEXT_BASE = 0xbfc10070
+CONFIG_SYS_TEXT_BASE = 0xbfc10070
else
ifeq ($(TBASE),2)
-TEXT_BASE = 0xbfc30070
+CONFIG_SYS_TEXT_BASE = 0xbfc30070
else
## Only to make ordinary make work
-TEXT_BASE = 0x90000000
+CONFIG_SYS_TEXT_BASE = 0x90000000
endif
endif
endif
# MBX8xx boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# Multidata HERMES-PRO ISDN Routers
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
# Hidden Dragon boards
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# HYMOD boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
PLATFORM_CPPFLAGS += -I$(TOPDIR)
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf561-0.5
#
# IceCube board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFF00000 boot high (standard configuration)
# 0xFF000000 boot low for 16 MiB boards
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# ICU862 boards
#
-TEXT_BASE = 0x40F00000
+CONFIG_SYS_TEXT_BASE = 0x40F00000
OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data
# MA 02111-1307 USA
#
-TEXT_BASE = 0xff800000
+CONFIG_SYS_TEXT_BASE = 0xff800000
# for the "final" configuration, with U-Boot in flash, or the address
# in RAM where U-Boot is loaded at for debugging.
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
# MA 02111-1307 USA
#
-TEXT_BASE = 0xc1780000
+CONFIG_SYS_TEXT_BASE = 0xc1780000
-TEXT_BASE = 0x87f00000
+CONFIG_SYS_TEXT_BASE = 0x87f00000
#
# ROM version
-TEXT_BASE = 0xB0000000
+CONFIG_SYS_TEXT_BASE = 0xB0000000
# RAM version
-#TEXT_BASE = 0x80100000
+#CONFIG_SYS_TEXT_BASE = 0x80100000
#
# INKA 4X0 board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFE00000 boot low
#
# 0x00100000 boot from RAM (for testing only)
#
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot low
-TEXT_BASE = 0xFFE00000
+CONFIG_SYS_TEXT_BASE = 0xFFE00000
## For testing: boot from RAM
-#TEXT_BASE = 0x00100000
+#CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
#
# This is the address where U-Boot lives in flash:
-#TEXT_BASE = 0
+#CONFIG_SYS_TEXT_BASE = 0
# FIXME: armboot does only work correctly when being compiled
# for the addresses _after_ relocation to RAM!! Otherwhise the
# .bss segment is assumed in flash...
-TEXT_BASE = 0xa1fe0000
+CONFIG_SYS_TEXT_BASE = 0xa1fe0000
.endm
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
/*
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf532-0.5
# MicroSys IP860 VMEBus Systems
#
-TEXT_BASE = 0x10000000
+CONFIG_SYS_TEXT_BASE = 0x10000000
# IPEK01 board
#
-TEXT_BASE = 0xfc000000
+CONFIG_SYS_TEXT_BASE = 0xfc000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# iphase4539 board
#
-TEXT_BASE = 0xffb00000
+CONFIG_SYS_TEXT_BASE = 0xffb00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
#
# Interphase iSPAN Communications Controllers
#
-#TEXT_BASE = 0xFF800000
-#TEXT_BASE = 0xFFBA0000
-TEXT_BASE = 0xFE7A0000
+#CONFIG_SYS_TEXT_BASE = 0xFF800000
+#CONFIG_SYS_TEXT_BASE = 0xFFBA0000
+CONFIG_SYS_TEXT_BASE = 0xFE7A0000
# IVM boards
#
-TEXT_BASE = 0xFF000000
+CONFIG_SYS_TEXT_BASE = 0xFF000000
#
-TEXT_BASE = 0x00f80000
+CONFIG_SYS_TEXT_BASE = 0x00f80000
# Picture Elements, Inc. JSE boards
#
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
#
# Jupiter board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFF00000 boot high (standard configuration)
# 0x00100000 boot from RAM (for testing only)
#
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
-#PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -DDEBUG -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
+#PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+# -DDEBUG -I$(TOPDIR)/board
ifdef CONFIG_NAND_SPL
-TEXT_BASE = 0x810c0000
+CONFIG_SYS_TEXT_BASE = 0x810c0000
else
-TEXT_BASE = 0x81fc0000
+CONFIG_SYS_TEXT_BASE = 0x81fc0000
endif
-TEXT_BASE = 0x21f00000
+CONFIG_SYS_TEXT_BASE = 0x21f00000
# mgsvud boards
#
-TEXT_BASE = 0xf0000000
+CONFIG_SYS_TEXT_BASE = 0xf0000000
# MA 02110-1301 USA
#
-TEXT_BASE = 0x004000000
+CONFIG_SYS_TEXT_BASE = 0x004000000
# Kirkwood Boot Image configuration file
KWD_CONFIG = $(SRCTREE)/board/$(BOARDDIR)/kwbimage.cfg
# MA 02111-1307 USA
#
-TEXT_BASE = 0xF0000000
+CONFIG_SYS_TEXT_BASE = 0xF0000000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
ifeq ($(perm),1)
PLATFORM_CPPFLAGS += -DCONFIG_KORAT_PERMANENT
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
else
-TEXT_BASE = 0xF7F60000
+CONFIG_SYS_TEXT_BASE = 0xF7F60000
LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot-F7FC.lds
endif
# KUP4K board
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
# KUP4X board
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
# Lantec board (based on TQM8xxL config).
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
#
-TEXT_BASE = 0xc1780000
+CONFIG_SYS_TEXT_BASE = 0xc1780000
# LinkStation/LinkStation-HG:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# Standard configuration - all models
# 0xFFF00000 boot from flash
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
# For flash image - all models
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
# For RAM image
# HLAN and LAN
-#TEXT_BASE = 0x03F00000
+#CONFIG_SYS_TEXT_BASE = 0x03F00000
# HGLAN and HGTL
-#TEXT_BASE = 0x07F00000
+#CONFIG_SYS_TEXT_BASE = 0x07F00000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80e80000
-TEXT_BASE = 0xc0000000
+CONFIG_SYS_TEXT_BASE = 0xc0000000
-TEXT_BASE = 0x87f00000
+CONFIG_SYS_TEXT_BASE = 0x87f00000
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80e80000
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80e80000
#
#address where u-boot will be relocated
-#TEXT_BASE = 0x0
-TEXT_BASE = 0x81500000
+#CONFIG_SYS_TEXT_BASE = 0x0
+CONFIG_SYS_TEXT_BASE = 0x81500000
#define BCFG1_VALUE 0x10001C61
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
MEMMAP_ADR:
.word MEMMAP
BCFG0_ADR:
# download area is 0xc0f00000
#
-TEXT_BASE = 0xc1fc0000
-#TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0xc1fc0000
+#CONFIG_SYS_TEXT_BASE = 0x00000000
#define DO_MEM_READ 2
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
-#TEXT_BASE = 0xa1700000
-TEXT_BASE = 0xa3080000
-#TEXT_BASE = 0
+#CONFIG_SYS_TEXT_BASE = 0xa1700000
+CONFIG_SYS_TEXT_BASE = 0xa3080000
+#CONFIG_SYS_TEXT_BASE = 0
# LWE Monitorcontroller Litronic LCD IV boards
#
-TEXT_BASE = 0x40000000
-#TEXT_BASE = 0x41000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
+#CONFIG_SYS_TEXT_BASE = 0x41000000
# lwmon5 (440EPx)
#
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFF80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
-TEXT_BASE = 0x21f00000
+CONFIG_SYS_TEXT_BASE = 0x21f00000
#
# INKA 4X0 board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFE00000 boot high
#
# 0x00100000 boot from RAM (for testing only)
#
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-#TEXT_BASE = 0x00100000
+#CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
#
# MUCMC52 board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFE00000 boot high
#
# 0x00100000 boot from RAM (for testing only)
#
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-#TEXT_BASE = 0x00100000
+#CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot.lds
# UC100 boards
#
-#TEXT_BASE = 0x40000000
-TEXT_BASE = 0x40700000
+#CONFIG_SYS_TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40700000
#
# INKA 4X0 board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFE00000 boot high
#
# 0x00100000 boot from RAM (for testing only)
#
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-#TEXT_BASE = 0x00100000
+#CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
LDSCRIPT := $(SRCTREE)/arch/powerpc/cpu/mpc5xxx/u-boot-customlayout.lds
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFF800000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFF800000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFF800000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFF800000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
LDSCRIPT := $(SRCTREE)/board/matrix_vision/mvsmr/u-boot.lds
# MBX8xx boards
#
-TEXT_BASE = 0xfe000000
-/*TEXT_BASE = 0x00200000 */
+CONFIG_SYS_TEXT_BASE = 0xfe000000
+/*CONFIG_SYS_TEXT_BASE = 0x00200000 */
#
# MCC200, PRS200 boards:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFC000000 boot low (standard configuration)
# 0xFFF00000 boot high
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot low
-TEXT_BASE = 0xFC000000
+CONFIG_SYS_TEXT_BASE = 0xFC000000
## Boot high
-# TEXT_BASE = 0xFFF00000
+# CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0x87000000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0x87000000
endif
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
PLATFORM_LDFLAGS += --gc-sections
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
PLATFORM_RELFLAGS += -ffunction-sections -fdata-sections
PLATFORM_LDFLAGS += --gc-sections
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0x18000000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
+CONFIG_SYS_TEXT_BASE = 0x18000000
# Use board specific linker script
LDSCRIPT := $(SRCTREE)/board/ml2/u-boot.lds
# MA 02111-1307 USA
#
-TEXT_BASE = 0x00f00000
+CONFIG_SYS_TEXT_BASE = 0x00f00000
#CROSS_COMPILE = arm-elf-
lowlevel_init:
#if defined(CONFIG_MODNET50)
- ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - TEXT_BASE)
+ ldr pc, =(_jump_to_high + NETARM_MMAP_CS0_BASE - CONFIG_SYS_TEXT_BASE)
_jump_to_high:
/*
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# Promess Motion-PRO
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
#
# MOUSSE boards
#
-TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
LDSCRIPT := $(SRCTREE)/board/mousse/u-boot.lds
-TEXT_BASE = 0x27F00000
+CONFIG_SYS_TEXT_BASE = 0x27F00000
## For testing: load at 0x20100000 and "go" at 0x201000A4
-#TEXT_BASE = 0x20100000
+#CONFIG_SYS_TEXT_BASE = 0x20100000
-ifndef TEXT_BASE
-TEXT_BASE = 0xFC000000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFC000000
endif
# default CCARBAR is at 0xff700000
# assume U-Boot is less than 0.5MB
#
-#TEXT_BASE = 0x1000000
-TEXT_BASE = 0xfff80000
+#CONFIG_SYS_TEXT_BASE = 0x1000000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
#
# Boot from flash at location 0x00000000
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFFE0000
-TEXT_BASE = 0xFFF80000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
#
-#TEXT_BASE = 0x30F80000
-TEXT_BASE = 0x33F80000
+#CONFIG_SYS_TEXT_BASE = 0x30F80000
+CONFIG_SYS_TEXT_BASE = 0x33F80000
/**************************************/
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
# MA 02111-1307 USA
#
-# TEXT_BASE refers to image _after_ relocation.
+# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x8FFC0000
+CONFIG_SYS_TEXT_BASE = 0x8FFC0000
# MA 02111-1307 USA
#
-# TEXT_BASE refers to image _after_ relocation.
+# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x8FFC0000
+CONFIG_SYS_TEXT_BASE = 0x8FFC0000
# MA 02111-1307 USA
#
-# TEXT_BASE refers to image _after_ relocation.
+# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x8FFC0000
+CONFIG_SYS_TEXT_BASE = 0x8FFC0000
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x8FFC0000
+CONFIG_SYS_TEXT_BASE = 0x8FFC0000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFF000000
+CONFIG_SYS_TEXT_BASE = 0xFF000000
#
# MUNICes board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFF00000 boot high (standard configuration)
#
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFF00000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# CU824 board
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
-TEXT_BASE = 0x08400000
+CONFIG_SYS_TEXT_BASE = 0x08400000
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
#
# This config file is used for compilation of IMX sources
#
-# You might change location of U-Boot in memory by setting right TEXT_BASE.
+# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
# This allows for example having one copy located at the end of ram and stored
# in flash device and later on while developing use other location to test
# the code in RAM device only.
#
-TEXT_BASE = 0x08f00000
+CONFIG_SYS_TEXT_BASE = 0x08f00000
# NC650 board
#
-TEXT_BASE = 0x40700000
+CONFIG_SYS_TEXT_BASE = 0x40700000
# netVia Boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
# Netstal Maschinen AG: HCU4 boards
#
-TEXT_BASE = 0xFFFB0000
+CONFIG_SYS_TEXT_BASE = 0xFFFB0000
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG -g
# Netstal Maschinen AG: HCU5 boards
#
-TEXT_BASE = 0xFFFB0000
+CONFIG_SYS_TEXT_BASE = 0xFFFB0000
PLATFORM_CPPFLAGS += -DCONFIG_440=1
#
# Netstal Maschinen AG: MCU25 board
#
-TEXT_BASE = 0xFFFB0000
+CONFIG_SYS_TEXT_BASE = 0xFFFB0000
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG -g
# entry 1000'8000 (mem base + reserved)
#
# We load ourself to internal RAM at 2001'2000
-# Check map file when changing TEXT_BASE.
+# Check map file when changing CONFIG_SYS_TEXT_BASE.
# Everything has fit into 192kB internal SRAM!
#
-# XXX TEXT_BASE = 0x20012000
-TEXT_BASE = 0x13FC0000
+# XXX CONFIG_SYS_TEXT_BASE = 0x20012000
+CONFIG_SYS_TEXT_BASE = 0x13FC0000
#include <version.h>
_TEXT_BASE:
- .word TEXT_BASE /* SDRAM load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */
OMAP5910_LPG1_BASE: .word 0xfffbd000
OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
# netVia Boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
# netVia Boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
# netVia Boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
#
-TEXT_BASE = 0x00780000
+CONFIG_SYS_TEXT_BASE = 0x00780000
.endm
_TEXT_BASE:
- .word TEXT_BASE @ sdram load addr from config.mk
+ .word CONFIG_SYS_TEXT_BASE @ sdram load addr from config.mk
_PHYS_FLASH:
.word PHYS_FLASH_1 @ real flash address (without mirroring)
_CAS_LATENCY:
# Nexus boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
#
# boot low for 16 MiB boards
-TEXT_BASE = 0xFF000000
+CONFIG_SYS_TEXT_BASE = 0xFF000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
-# For use with external or internal boots.
-TEXT_BASE = 0x80008000
+CONFIG_SYS_TEXT_BASE = 0x80008000
# OXC boards
#
-#TEXT_BASE = 0x00090000
-TEXT_BASE = 0xFFF00000
+#CONFIG_SYS_TEXT_BASE = 0x00090000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80e80000
NOTE! When you switch between the two boot flashes, the
base addresses will be swapped.
-Have this in mind when you compile u-boot. TEXT_BASE has
+Have this in mind when you compile u-boot. CONFIG_SYS_TEXT_BASE has
to match the address where u-boot is located when you
actually launch.
#
# ROM version
-#TEXT_BASE = 0xbfc00000
+#CONFIG_SYS_TEXT_BASE = 0xbfc00000
# SDRAM version
-TEXT_BASE = 0x83800000
+CONFIG_SYS_TEXT_BASE = 0x83800000
# PCIPPC-2 boards
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# Check the U-Boot Image with a SHA1 checksum
ALL += $(obj)u-boot.sha1
-#TEXT_BASE = 0x00001000
+#CONFIG_SYS_TEXT_BASE = 0x00001000
ifeq ($(ramsym),1)
-TEXT_BASE = 0xFBD00000
+CONFIG_SYS_TEXT_BASE = 0xFBD00000
else
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# MA 02111-1307 USA
#
-TEXT_BASE = 0xF0000000
+CONFIG_SYS_TEXT_BASE = 0xF0000000
#
# phyCORE-MPC5200B tiny board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFF00000 boot high (standard configuration)
# 0xFF000000 boot low
sinclude $(TOPDIR)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
-TEXT_BASE = 0xa1F80000
-#TEXT_BASE = 0xa3080000
-#TEXT_BASE = 0
+CONFIG_SYS_TEXT_BASE = 0xa1F80000
+#CONFIG_SYS_TEXT_BASE = 0xa3080000
+#CONFIG_SYS_TEXT_BASE = 0
# PM520 board
#
-TEXT_BASE = 0xfff00000
-# TEXT_BASE = 0x00100000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot 64-bit flash
-TEXT_BASE = 0xFF000000
+CONFIG_SYS_TEXT_BASE = 0xFF000000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot 64-bit flash
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
# default CCARBAR is at 0xff700000
# assume U-Boot is less than 0.5MB
#
-TEXT_BASE = 0xfff80000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
# default CCARBAR is at 0xff700000
# assume U-Boot is less than 0.5MB
#
-TEXT_BASE = 0xfff80000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
# PN62 boards
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
# MA 02111-1307 USA
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
TEXT_END = 0xFFF40000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# MBX8xx boards
#
-TEXT_BASE = 0xfe000000
+CONFIG_SYS_TEXT_BASE = 0xfe000000
TEXT_END = 0xfe080000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# AMCC 440GX Reference Platform (Ocotea) board
#
-#TEXT_BASE = 0xFFFE0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# p3mx boards (P3M750 & P3M7448)
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
# esd ADCIOP boards
#
-#TEXT_BASE = 0xFFFE0000
+#CONFIG_SYS_TEXT_BASE = 0xFFFE0000
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
#
-TEXT_BASE = 0x01f00000
+CONFIG_SYS_TEXT_BASE = 0x01f00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0x018e0000
+CONFIG_SYS_TEXT_BASE = 0x018e0000
PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
# MA 02111-1307 USA
#
-TEXT_BASE = 0x01fc0000
+CONFIG_SYS_TEXT_BASE = 0x01fc0000
PLATFORM_CPPFLAGS += -mno-hw-div -mno-hw-mul
PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(VENDOR)/include
#
# ROM version
-TEXT_BASE = 0xB0000000
+CONFIG_SYS_TEXT_BASE = 0xB0000000
# RAM version
-#TEXT_BASE = 0x80100000
+#CONFIG_SYS_TEXT_BASE = 0x80100000
FUNCPTR absEntry;
ulong *src,*dst;
- src = (ulong *)(TEXT_BASE + 0x428);
+ src = (ulong *)(CONFIG_SYS_TEXT_BASE + 0x428);
dst = (ulong *)0xbf0081d0;
- absEntry = (FUNCPTR)(TEXT_BASE + 0x400);
+ absEntry = (FUNCPTR)(CONFIG_SYS_TEXT_BASE + 0x400);
absEntry(src,dst,0x6);
src = (ulong *)((ulong)copydwords & 0xfffffff8);
-#TEXT_BASE = 0xa1700000
-TEXT_BASE = 0xa3080000
-#TEXT_BASE = 0
+#CONFIG_SYS_TEXT_BASE = 0xa1700000
+CONFIG_SYS_TEXT_BASE = 0xa3080000
+#CONFIG_SYS_TEXT_BASE = 0
#
# ROM version
-TEXT_BASE = 0xbfc00000
+CONFIG_SYS_TEXT_BASE = 0xbfc00000
# RAM version
-#TEXT_BASE = 0x80001000
+#CONFIG_SYS_TEXT_BASE = 0x80001000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# RMU boards
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
# TQM8xxL boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
# Rattler series boards by Analogue & Micro
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
# RBC823 boards
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
# MA 02111-1307 USA
#
-# TEXT_BASE refers to image _after_ relocation.
+# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x8FFC0000
+CONFIG_SYS_TEXT_BASE = 0x8FFC0000
# MA 02111-1307 USA
#
-# TEXT_BASE refers to image _after_ relocation.
+# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x8FFC0000
+CONFIG_SYS_TEXT_BASE = 0x8FFC0000
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x0FFC0000
+CONFIG_SYS_TEXT_BASE = 0x0FFC0000
# MA 02111-1307 USA
#
-# TEXT_BASE refers to image _after_ relocation.
+# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x0FFC0000
+CONFIG_SYS_TEXT_BASE = 0x0FFC0000
# MA 02111-1307 USA
#
-# TEXT_BASE refers to image _after_ relocation.
+# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x0C7C0000
+CONFIG_SYS_TEXT_BASE = 0x0C7C0000
#
# board/sh7763rdp/config.mk
#
-# TEXT_BASE refers to image _after_ relocation.
+# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
-TEXT_BASE = 0x8FFC0000
+CONFIG_SYS_TEXT_BASE = 0x8FFC0000
# PLATFORM_CPPFLAGS += -DCONFIG_MULTIBOOT
# MA 02111-1307 USA
#
-# TEXT_BASE refers to image _after_ relocation.
+# CONFIG_SYS_TEXT_BASE refers to image _after_ relocation.
#
# NOTE: Must match value used in u-boot.lds (in this directory).
#
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0x0ff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0x0ff80000
endif
# RMU boards
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
-TEXT_BASE = 0x23f00000
\ No newline at end of file
+CONFIG_SYS_TEXT_BASE = 0x23f00000
\ No newline at end of file
-TEXT_BASE = 0x23f00000
+CONFIG_SYS_TEXT_BASE = 0x23f00000
-TEXT_BASE = 0x73f00000
+CONFIG_SYS_TEXT_BASE = 0x73f00000
# MBX8xx boards
#
-TEXT_BASE = 0x80F00000
+CONFIG_SYS_TEXT_BASE = 0x80F00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# MBX8xx boards
#
-TEXT_BASE = 0xff000000
-/*TEXT_BASE = 0x00200000 */
+CONFIG_SYS_TEXT_BASE = 0xff000000
+/*CONFIG_SYS_TEXT_BASE = 0x00200000 */
LDSCRIPT := $(SRCTREE)/board/rsdproto/u-boot.lds
# 82xx boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# 0x30000000 to 0x35000000 (80MiB)
# 0x40000000 to 0x50000000 (256MiB)
#
-TEXT_BASE = 0x34800000
+CONFIG_SYS_TEXT_BASE = 0x34800000
*/
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
#
-TEXT_BASE = 0x0CF80000
+CONFIG_SYS_TEXT_BASE = 0x0CF80000
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
#
-TEXT_BASE = 0x33F80000
+CONFIG_SYS_TEXT_BASE = 0x33F80000
/**************************************/
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
ifndef CONFIG_NAND_SPL
-TEXT_BASE = $(RAM_TEXT)
+CONFIG_SYS_TEXT_BASE = $(RAM_TEXT)
else
-TEXT_BASE = 0
+CONFIG_SYS_TEXT_BASE = 0
endif
LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot-nand.lds
#endif
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
# 0x30000000 to 0x35000000 (80MiB)
# 0x40000000 to 0x48000000 (128MiB)
#
-TEXT_BASE = 0x34800000
+CONFIG_SYS_TEXT_BASE = 0x34800000
*/
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
#
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
#
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
# Sandpoint boards
#
-#TEXT_BASE = 0x00090000
-TEXT_BASE = 0xFFF00000
+#CONFIG_SYS_TEXT_BASE = 0x00090000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
#
# download area is 3300'0000
-TEXT_BASE = 0x33F80000
+CONFIG_SYS_TEXT_BASE = 0x33F80000
/**************************************/
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
# Wind River sbc405 boards
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# sbc8240 board
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
# MBX8xx boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# SBC8349E
#
-TEXT_BASE = 0xFF800000
+CONFIG_SYS_TEXT_BASE = 0xFF800000
#
# sbc8548 board
#
-ifndef TEXT_BASE
-TEXT_BASE = 0xfffa0000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xfffa0000
endif
# default CCARBAR is at 0xff700000
# assume U-Boot is less than 256K
#
-TEXT_BASE = 0xfffc0000
+CONFIG_SYS_TEXT_BASE = 0xfffc0000
# sbc8641 board
# default CCSRBAR is at 0xff700000
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFA0000
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
#
# This config file is used for compilation of scb93328 sources
#
-# You might change location of U-Boot in memory by setting right TEXT_BASE.
+# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
# This allows for example having one copy located at the end of ram and stored
# in flash device and later on while developing use other location to test
# the code in RAM device only.
#
-TEXT_BASE = 0x08f00000
+CONFIG_SYS_TEXT_BASE = 0x08f00000
#
-TEXT_BASE = 0xd8380000
+CONFIG_SYS_TEXT_BASE = 0xd8380000
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
endif
-ifndef TEXT_BASE
-TEXT_BASE = 0x00100000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0x00100000
endif
ifdef CONFIG_NAND_LP
# iad210 boards
#
-TEXT_BASE = 0x08000000
-/*TEXT_BASE = 0x00200000 */
+CONFIG_SYS_TEXT_BASE = 0x08000000
+/*CONFIG_SYS_TEXT_BASE = 0x00200000 */
# for the "final" configuration, with U-Boot in flash, or the address
# in RAM where U-Boot is loaded at for debugging.
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
#
#address where u-boot will be relocated
-#TEXT_BASE = 0x0
-TEXT_BASE = 0x81500000
+#CONFIG_SYS_TEXT_BASE = 0x0
+CONFIG_SYS_TEXT_BASE = 0x81500000
#define IO0_VALUE 0x4000C
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
MEMMAP_ADR:
.word MEMMAP
BCFG0_ADR:
# SIXNET boards
#
-TEXT_BASE = 0xF8000000
+CONFIG_SYS_TEXT_BASE = 0xF8000000
# Start address of Bootloader in Flash
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
# Start address of 512K Socketed Flash
#
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
# socrates board
# default CCARBAR is at 0xff700000
#
-TEXT_BASE = 0xfff80000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
# sorcery board
#
-TEXT_BASE = 0xfff00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+CONFIG_SYS_TEXT_BASE = 0xfff00000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# MPC885ADS boards
#
-#TEXT_BASE = 0xFE000000
-TEXT_BASE = 0xFFF00000
+#CONFIG_SYS_TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/spc1920
HOSTCFLAGS += -I$(TOPDIR)/board/spc1920
HOST_ENVIRO_CFLAGS += -I$(TOPDIR)/board/spc1920
# SPD823TS boards
#
-TEXT_BASE = 0xFF000000
+CONFIG_SYS_TEXT_BASE = 0xFF000000
#########################################################################
-TEXT_BASE = 0x00700000
+CONFIG_SYS_TEXT_BASE = 0x00700000
ALL += $(obj)u-boot.img
#########################################################################
-TEXT_BASE = 0x00700000
+CONFIG_SYS_TEXT_BASE = 0x00700000
ALL += $(obj)u-boot.img
#########################################################################
-TEXT_BASE = 0x00700000
+CONFIG_SYS_TEXT_BASE = 0x00700000
ALL += $(obj)u-boot.img
#########################################################################
-TEXT_BASE = 0x00700000
+CONFIG_SYS_TEXT_BASE = 0x00700000
ALL += $(obj)u-boot.img
# image should be loaded at 0x01000000
#
-TEXT_BASE = 0x03F80000
+CONFIG_SYS_TEXT_BASE = 0x03F80000
# default CCARBAR is at 0xff700000
# assume U-Boot is less than 0.5MB
#
-TEXT_BASE = 0xfff80000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
# U-Boot is less than 256K, so push
# it further up into the flash
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
# STx XTc
#
-TEXT_BASE = 0x40F00000
+CONFIG_SYS_TEXT_BASE = 0x40F00000
# MA 02111-1307 USA
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
#
#
-TEXT_BASE = 0x11080000
+CONFIG_SYS_TEXT_BASE = 0x11080000
_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
.globl lowlevel_init
lowlevel_init:
-TEXT_BASE = 0x10000000
+CONFIG_SYS_TEXT_BASE = 0x10000000
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0xFFFA0000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xFFFA0000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
#
# ROM version
-TEXT_BASE = 0xBFC00000
+CONFIG_SYS_TEXT_BASE = 0xBFC00000
# RAM version
-#TEXT_BASE = 0x80400000
+#CONFIG_SYS_TEXT_BASE = 0x80400000
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf518-0.0
#
# This is not actually used for Blackfin boards so do not change it
-#TEXT_BASE = do-not-use-me
+#CONFIG_SYS_TEXT_BASE = do-not-use-me
CONFIG_BFIN_CPU = bf537-0.2
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80008000
+CONFIG_SYS_TEXT_BASE = 0x80008000
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80e80000
#
-TEXT_BASE = 0x11080000
+CONFIG_SYS_TEXT_BASE = 0x11080000
_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
.globl lowlevel_init
lowlevel_init:
#
-TEXT_BASE = 0x11080000
+CONFIG_SYS_TEXT_BASE = 0x11080000
_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
.globl lowlevel_init
lowlevel_init:
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80e80000
# Used with full SRAM boot.
# This is either with a GP system or a signed boot image.
# easiest, and safest way to go if you can.
-#TEXT_BASE = 0x40270000
+#CONFIG_SYS_TEXT_BASE = 0x40270000
# Handy to get symbols to debug ROM version.
-#TEXT_BASE = 0x0
-#TEXT_BASE = 0x08000000
-#TEXT_BASE = 0x04000000
+#CONFIG_SYS_TEXT_BASE = 0x0
+#CONFIG_SYS_TEXT_BASE = 0x08000000
+#CONFIG_SYS_TEXT_BASE = 0x04000000
#include <asm/arch/clocks.h>
_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
/**************************************************************************
* cpy_clk_code: relocates clock code into SRAM where its safer to execute
#
-TEXT_BASE = 0x11080000
+CONFIG_SYS_TEXT_BASE = 0x11080000
_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
.globl lowlevel_init
lowlevel_init:
#
#
-TEXT_BASE = 0x11080000
+CONFIG_SYS_TEXT_BASE = 0x11080000
#endif
_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
.globl lowlevel_init
lowlevel_init:
# 8000'0000 - 9fff'ffff (512 MB)
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
-TEXT_BASE = 0x80e80000
+
+CONFIG_SYS_TEXT_BASE = 0x80e80000
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80e80000
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
-TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80e80000
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
-TEXT_BASE = 0x83FC0000
+CONFIG_SYS_TEXT_BASE = 0x83FC0000
# (mem base + reserved)
# For use with external or internal boots.
-TEXT_BASE = 0x80e80000
+CONFIG_SYS_TEXT_BASE = 0x80e80000
#
# Total5200 board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFFF00000 boot high (standard configuration)
# 0xFE000000 boot low
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot high
-TEXT_BASE = 0xFFF00000
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
#
# TQM5200 board:
#
-# Valid values for TEXT_BASE are:
+# Valid values for CONFIG_SYS_TEXT_BASE are:
#
# 0xFC000000 boot low (standard configuration with room for max 64 MByte
# Flash ROM)
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
+ifndef CONFIG_SYS_TEXT_BASE
## Standard: boot low
-TEXT_BASE = 0xFC000000
+CONFIG_SYS_TEXT_BASE = 0xFC000000
## For a backup copy of U-Boot at the end of flash: boot high
-# TEXT_BASE = 0xFFF00000
+# CONFIG_SYS_TEXT_BASE = 0xFFF00000
## For testing: boot from RAM
-# TEXT_BASE = 0x00100000
+# CONFIG_SYS_TEXT_BASE = 0x00100000
endif
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
# for the "final" configuration, with U-Boot in flash, or the address
# in RAM where U-Boot is loaded at for debugging.
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
# for the "final" configuration, with U-Boot in flash, or the address
# in RAM where U-Boot is loaded at for debugging.
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)
# MA 02111-1307 USA
#
-TEXT_BASE = 0x80000000
+CONFIG_SYS_TEXT_BASE = 0x80000000
# tqm85xx board
#
ifeq ($(CONFIG_TQM8548_BE),y)
-TEXT_BASE = 0xfff80000
+CONFIG_SYS_TEXT_BASE = 0xfff80000
else
-TEXT_BASE = 0xfffc0000
+CONFIG_SYS_TEXT_BASE = 0xfffc0000
endif
# TQM8xxL boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-ifndef TEXT_BASE
-TEXT_BASE = 0x0DF40000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0x0DF40000
endif
LDSCRIPT := $(SRCTREE)/board/$(BOARDDIR)/u-boot.lds
_TEXT_BASE:
- .word TEXT_BASE
+ .word CONFIG_SYS_TEXT_BASE
.globl lowlevel_init
lowlevel_init:
-TEXT_BASE =0xa1f00000
+CONFIG_SYS_TEXT_BASE =0xa1f00000
# 0xa1700000
-#TEXT_BASE = 0
+#CONFIG_SYS_TEXT_BASE = 0
#
# UTX8245 boards
#
-TEXT_BASE = 0xFFF00000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+CONFIG_SYS_TEXT_BASE = 0xFFF00000
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
#
# Marel V37 boards
#
-TEXT_BASE = 0x40000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
-TEXT_BASE = 0xFF000000
+CONFIG_SYS_TEXT_BASE = 0xFF000000
-PLATFORM_CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE) -I$(TOPDIR)/board
+PLATFORM_CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -I$(TOPDIR)/board
sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
endif
-ifndef TEXT_BASE
-TEXT_BASE = 0xfe000000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xfe000000
endif
-TEXT_BASE = 0x13FD0000
+CONFIG_SYS_TEXT_BASE = 0x13FD0000
#include <version.h>
_TEXT_BASE:
- .word TEXT_BASE /* SDRAM load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* SDRAM load addr from config.mk */
OMAP5910_LPG1_BASE: .word 0xfffbd000
OMAP5910_TIPB_SWITCHES_BASE: .word 0xfffbc800
-TEXT_BASE = 0xa1000000
+CONFIG_SYS_TEXT_BASE = 0xa1000000
# Wave 7 Optics boards
#
-#TEXT_BASE = 0xFFF80000
-TEXT_BASE = 0xFFFC0000
+#CONFIG_SYS_TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
#PLATFORM_CPPFLAGS += -I$(TOPDIR)/board/$(BOARD)
#
# This is config used for compilation of WEP EP250 sources
#
-# You might change location of U-Boot in memory by setting right TEXT_BASE.
+# You might change location of U-Boot in memory by setting right CONFIG_SYS_TEXT_BASE.
# This allows for example having one copy located at the end of ram and stored
# in flash device and later on while developing use other location to test
# the code in RAM device only.
#
-TEXT_BASE = 0xa1fe0000
-#TEXT_BASE = 0xa1001000
+CONFIG_SYS_TEXT_BASE = 0xa1fe0000
+#CONFIG_SYS_TEXT_BASE = 0xa1001000
# MA 02111-1307 USA
#
-#TEXT_BASE = 0xFE000000
-TEXT_BASE = 0x40000000
+#CONFIG_SYS_TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0x40000000
OBJCFLAGS = --set-section-flags=.ppcenv=contents,alloc,load,data
-TEXT_BASE = 0xa3FB0000
-#TEXT_BASE = 0
+CONFIG_SYS_TEXT_BASE = 0xa3FB0000
+#CONFIG_SYS_TEXT_BASE = 0
#
ifeq ($(ramsym),1)
-TEXT_BASE = 0x07FD0000
+CONFIG_SYS_TEXT_BASE = 0x07FD0000
else
-TEXT_BASE = 0xFFF80000
+CONFIG_SYS_TEXT_BASE = 0xFFF80000
endif
PLATFORM_CPPFLAGS += -DCONFIG_440=1
#
# XPedite5170
#
-TEXT_BASE = 0xfff00000
+CONFIG_SYS_TEXT_BASE = 0xfff00000
#
# xpedite5200 board
#
-ifndef TEXT_BASE
-TEXT_BASE = 0xfff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xfff80000
endif
#
# xpedite5370 board
#
-ifndef TEXT_BASE
-TEXT_BASE = 0xfff80000
+ifndef CONFIG_SYS_TEXT_BASE
+CONFIG_SYS_TEXT_BASE = 0xfff80000
endif
# Version: Xilinx EDK 6.3 EDK_Gmm.12.3
#
-TEXT_BASE = 0x29000000
+CONFIG_SYS_TEXT_BASE = 0x29000000
PLATFORM_CPPFLAGS += -mno-xl-soft-mul
PLATFORM_CPPFLAGS += -mno-xl-soft-div
*(COMMON)
}
- ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your configuration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
+ ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your configuration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_TEXT_BASE may need to be modified.");
_end = . ;
PROVIDE (end = .);
*(COMMON)
}
- ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your configuration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
+ ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your configuration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_TEXT_BASE may need to be modified.");
_end = . ;
PROVIDE (end = .);
. = ALIGN(4);
}
- ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
+ ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_TEXT_BASE may need to be modified.");
_end = . ;
PROVIDE (end = .);
. = ALIGN(4);
}
- ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and TEXT_BASE may need to be modified.");
+ ppcenv_assert = ASSERT(. < 0xFFFFB000, ".bss section too big, overlaps .ppcenv section. Please update your confguration: CONFIG_SYS_MONITOR_BASE, CONFIG_SYS_MONITOR_LEN and CONFIG_SYS_TEXT_BASE may need to be modified.");
_end = . ;
PROVIDE (end = .);
# This is the address where U-Boot lives in flash:
-#TEXT_BASE = 0
+#CONFIG_SYS_TEXT_BASE = 0
# FIXME: armboot does only work correctly when being compiled
# for the addresses _after_ relocation to RAM!! Otherwhise the
# .bss segment is assumed in flash...
-TEXT_BASE = 0xA3F80000
+CONFIG_SYS_TEXT_BASE = 0xA3F80000
-TEXT_BASE = 0xA3F80000
+CONFIG_SYS_TEXT_BASE = 0xA3F80000
# MA 02111-1307 USA
#
-TEXT_BASE = 0xFFFC0000
+CONFIG_SYS_TEXT_BASE = 0xFFFC0000
-TEXT_BASE = 0xa1000000
+CONFIG_SYS_TEXT_BASE = 0xa1000000
# ZPC.1900 board
#
-TEXT_BASE = 0xFE000000
+CONFIG_SYS_TEXT_BASE = 0xFE000000
-#TEXT_BASE = 0x0
-#TEXT_BASE = 0xa1700000
-#TEXT_BASE = 0xa3080000
-TEXT_BASE = 0xa3008000
+#CONFIG_SYS_TEXT_BASE = 0x0
+#CONFIG_SYS_TEXT_BASE = 0xa1700000
+#CONFIG_SYS_TEXT_BASE = 0xa3080000
+CONFIG_SYS_TEXT_BASE = 0xa3008000
CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
-D__KERNEL__
-ifneq ($(TEXT_BASE),)
-CPPFLAGS += -DTEXT_BASE=$(TEXT_BASE)
+ifneq ($(CONFIG_SYS_TEXT_BASE),)
+CPPFLAGS += -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE)
endif
ifneq ($(RESET_VECTOR_ADDRESS),)
AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS)
LDFLAGS += -Bstatic -T $(obj)u-boot.lds $(PLATFORM_LDFLAGS)
-ifneq ($(TEXT_BASE),)
-LDFLAGS += -Ttext $(TEXT_BASE)
+ifneq ($(CONFIG_SYS_TEXT_BASE),)
+LDFLAGS += -Ttext $(CONFIG_SYS_TEXT_BASE)
endif
# Location of a usable BFD library, where we define "usable" as
export HOSTCC HOSTCFLAGS HOSTLDFLAGS PEDCFLAGS HOSTSTRIP CROSS_COMPILE \
AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP MAKE
-export TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS
+export CONFIG_SYS_TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS
#########################################################################
>
>How are they (should they be) set in your memory map above?
-_armboot_start contains the value of TEXT_BASE (0xA07E0000); it seems
-TEXT_BASE and _armboot_start are both used for the same purpose in
+_armboot_start contains the value of CONFIG_SYS_TEXT_BASE (0xA07E0000); it seems
+CONFIG_SYS_TEXT_BASE and _armboot_start are both used for the same purpose in
different parts of the (ARM) code.
Furthermore, the startup code (cpu/<arm>/start.S) internally uses
another variable (_TEXT_BASE) with the same content as _armboot_start.
=> u-boot as single bootloader starting from flash
- in board/cobra5272/config.mk TEXT_BASE should be
+ in board/cobra5272/config.mk CONFIG_SYS_TEXT_BASE should be
- TEXT_BASE = 0xffe00000
+ CONFIG_SYS_TEXT_BASE = 0xffe00000
=> linking address for u-boot as single bootloader stored in flash
=> u-boot as RAM version, chainloaded by another bootloader or using bdm cable
- in board/cobra5272/config.mk TEXT_BASE should be
+ in board/cobra5272/config.mk CONFIG_SYS_TEXT_BASE should be
- TEXT_BASE = 0x00020000
+ CONFIG_SYS_TEXT_BASE = 0x00020000
=> target linking address for RAM
-------------------------------------------------------------------------------------
For boards which boot from nand_spl, it is possible to save a copy
-if TEXT_BASE == relocation address! This prevents that uboot code
+if CONFIG_SYS_TEXT_BASE == relocation address! This prevents that uboot code
is copied again in relocate_code().
example for the tx25 board:
f) u-boot code steps through board_init_f() and calculates
the relocation address and copy itself to it
-If TEXT_BASE == relocation address, the copying of u-boot
+If CONFIG_SYS_TEXT_BASE == relocation address, the copying of u-boot
in f) could be saved.
-------------------------------------------------------------------------------------
- fill in bd_t infos (check)
- adapt all boards
-- maybe adapt TEXT_BASE (this must be checked from board maintainers)
+- maybe adapt CONFIG_SYS_TEXT_BASE (this must be checked from board maintainers)
This *must* be done for boards, which boot from NOR flash
- on other boards if TEXT_BASE = relocation baseaddr, this saves
+ on other boards if CONFIG_SYS_TEXT_BASE = relocation baseaddr, this saves
one copying from u-boot code.
- new function dram_init_banksize() is actual board specific. Maybe
and start with code execution on this address.
- The First page contains u-boot code from u-boot:nand_spl/nand_boot_fsl_nfc.c
- which inits the dram, cpu registers, reloacte itself to TEXT_BASE and loads
+ which inits the dram, cpu registers, reloacte itself to CONFIG_SYS_TEXT_BASE and loads
the "real" u-boot to CONFIG_SYS_NAND_U_BOOT_DST and starts execution
@CONFIG_SYS_NAND_U_BOOT_START
- This u-boot does no ram int, nor cpu register setup. Just looks
where it have to relocate and relocate itself to this address.
- If relocate address = TEXT_BASE(not the same, as the TEXT_BASE
+ If relocate address = CONFIG_SYS_TEXT_BASE(not the same, as the TEXT_BASE
from the nand_spl code), no need to copy, just go on with bss clear
and jump to board_init_r.
http://mailman.uclinux.org/pipermail/uclinux-dev/2003-December/023384.html
U-boot is configured to run at 0x20000 at default. This can be configured by
-change TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in
+change CONFIG_SYS_TEXT_BASE in board/m5282evb/config.mk and CONFIG_SYS_MONITOR_BASE in
include/configs/M5282EVB.h.
3.2 BuS EB+MCF-EV123
initial vector table and basic processor initialization will not
be compiled in. The start address of u-boot must be adjusted in
the boards config header file (CONFIG_SYS_MONITOR_BASE) and Makefile
-(TEXT_BASE) to the load address.
+(CONFIG_SYS_TEXT_BASE) to the load address.
4.1 MCF5272 specific Options/Settings
-------------------------------------
pcm030_LOWBOOT_config: unconfig
@ >include/config.h
@[ -z "$(findstring LOWBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0xFF000000" >board/phytec/pcm030/config.tmp ; \
+ { echo "CONFIG_SYS_TEXT_BASE = 0xFF000000" >board/phytec/pcm030/config.tmp ; \
echo "... with LOWBOOT configuration" ; \
}
@[ -z "$(findstring RAMBOOT_,$@)" ] || \
- { echo "TEXT_BASE = 0x00100000" >board/phycore_mpc5200b_tiny/\
+ { echo "CONFIG_SYS_TEXT_BASE = 0x00100000" >board/phycore_mpc5200b_tiny/\
config.tmp ; \
echo "... with RAMBOOT configuration" ; \
echo "... remember to make sure that MBAR is already \
#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
* Definitions for initial stack pointer and data area
*/
-/* #define CONFIG_SYS_MONITOR_BASE TEXT_BASE */
+/* #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE */
/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/
#define CONFIG_SYS_GBL_DATA_SIZE 128
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0x20000000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
/*
#define CONFIG_SYS_FLASH_WRITE_TOUT 8000 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_FLASH_CFI_DRIVER 1
#define CONFIG_SYS_FLASH_CFI 1
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */
#ifdef CONFIG_BZIP2
#define CONFIG_SYS_MALLOC_LEN (2500 << 10) /* Reserve ~2.5 MB for malloc() */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_TIMESTAMP /* display image timestamps */
-#if (TEXT_BASE == 0xFC000000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) /* Boot low */
# define CONFIG_SYS_LOWBOOT 1
#endif
/*
* Flash configuration
*/
-#define CONFIG_SYS_FLASH_BASE TEXT_BASE /* 0xFC000000 */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE /* 0xFC000000 */
/* use CFI flash driver if no module variant is spezified */
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (2048 << 10) /* Reserve 2MB for malloc() */
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
/*
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
#if (CONFIG_SYS_MONITOR_BASE < FLASH_BASE0_PRELIM)
#define CONFIG_SYS_EUMB_ADDR 0xFCE00000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
/*
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFFC00000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 192 kB for Monitor */
#define CONFIG_SYS_EUMB_ADDR 0xFCE00000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
#if (CONFIG_SYS_MONITOR_BASE < FLASH_BASE0_PRELIM)
#define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND0_ADDR 0xd0000000 /* NAND Flash */
#define CONFIG_SYS_NAND1_ADDR 0xd0100000 /* NAND Flash */
#define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */
/* If M5282 port is fully implemented the monitor base will be behind
* the vector table. */
-#if (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
-#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
+#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
#else
-#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
#endif
#define CONFIG_SYS_MONITOR_LEN 0x20000
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for Monitor */
#ifdef CONFIG_BZIP2
#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */
#define CONFIG_SYS_FLASH1_SIZE 0x02000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
#define CONFIG_SYS_FLASH_SIZE CONFIG_SYS_FLASH0_SIZE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 * 1024) /* Reserve 196 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFFF80000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (4 << 20) /* Reserve 4 MB for malloc() */
#else
#undef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_GBL_DATA_SIZE 128
#else
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#endif
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
/*
#define CONFIG_SYS_FLASH_BANKS_LIST { 0xFF800000 }
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/ids8247/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/ids8247/config.mk
* The main FLASH is whichever is connected to *CS0.
*/
#define CONFIG_SYS_FLASH0_BASE 0xFFF00000
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFF800000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
#ifdef CONFIG_BZIP2
#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve 4 MB for malloc() */
#endif
-#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CONFIG_SYS_LOWBOOT 1
# define CONFIG_SYS_LOWBOOT16 1
#endif
-#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
#if defined(CONFIG_LITE5200B)
# error CONFIG_SYS_LOWBOOT08 is incompatible with the Lite5200B
#else
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
#ifdef CONFIG_CF_SBF
-# define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
+# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
#else
# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
/* If M5282 port is fully implemented the monitor base will be behind
* the vector table. */
-#if (TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
+#if (CONFIG_SYS_TEXT_BASE != CONFIG_SYS_INT_FLASH_BASE)
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#else
-#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x418) /* 24 Byte for CFM-Config */
#endif
#define CONFIG_SYS_MONITOR_LEN 0x20000
#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
#ifdef CONFIG_CF_SBF
-# define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
+# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
#else
# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
#define CONFIG_SYS_MEMTEST_END ((CONFIG_SYS_SDRAM_SIZE - 3) << 20)
#ifdef CONFIG_CF_SBF
-# define CONFIG_SYS_MONITOR_BASE (TEXT_BASE + 0x400)
+# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE + 0x400)
#else
# define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
#endif
/*
* Figure out if we are booting low via flash HRCW or high via the BCSR.
*/
-#if (TEXT_BASE != 0xFFF00000) /* Boot low (flash HRCW) */
+#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000) /* Boot low (flash HRCW) */
# define CONFIG_SYS_LOWBOOT 1
#endif
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_EXTRA_ENV_SETTINGS \
"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"fdtaddr=400000\0" \
"console=ttyCPM0\0" \
"setbootargs=setenv bootargs " \
/* !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!! !!
!! This configuration requires JP3 to be in position 1-2 to work !!
- !! To make it work for the default, the TEXT_BASE define in !!
+ !! To make it work for the default, the CONFIG_SYS_TEXT_BASE define in !!
!! board/mpc8266ads/config.mk must be changed from 0xfe000000 to !!
!! 0xfff00000 !!
!! The CONFIG_SYS_HRCW_MASTER define below must also be changed to match !!
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT
#endif
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE) && !defined(CONFIG_NAND_SPL)
#define CONFIG_SYS_RAMBOOT
"ethprime=TSEC1\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"fdtaddr=780000\0" \
"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
"console=ttyS0\0" \
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftp $loadaddr $uboot;" \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"fdtaddr=780000\0" \
"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
"ramdiskaddr=1000000\0" \
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#ifndef __CONFIG_H
#define __CONFIG_H
-#if (TEXT_BASE == 0xFE000000)
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000)
#define CONFIG_SYS_LOWBOOT
#endif
/*
* U-Boot memory configuration
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"fdtaddr=780000\0" \
"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_FLASH_BASE 0xFF800000 /* FLASH base address */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
"netdev=" MK_STR(CONFIG_NETDEV) "\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftp $loadaddr $uboot;" \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"fdtaddr=780000\0" \
"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
"ramdiskaddr=1000000\0" \
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
|| defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=8536ds/ramdisk.uboot\0" \
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms)*/
#define CONFIG_SYS_FLASH_CFI 1
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
#define CONFIG_FLASH_SHOW_PROGRESS 45 /* count down from 45/5: 9..1 */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=8544ds/ramdisk.uboot\0" \
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"consoledev=ttyS1\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=ramdisk.uboot\0" \
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=8572ds/ramdisk.uboot\0" \
#undef CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */
#define CONFIG_FLASH_CFI_DRIVER
/* Map the last 1M of flash where we're running from reset */
#define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U_EARLY (TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
| BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=8610hpcd/ramdisk.uboot\0" \
#undef CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */
#define CONFIG_FLASH_CFI_DRIVER
/* Map the last 1M of flash where we're running from reset */
#define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U_EARLY (TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
| BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=your.ramdisk.u-boot\0" \
#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
* Definitions for initial stack pointer and data area
*/
-/* #define CONFIG_SYS_MONITOR_BASE TEXT_BASE */
+/* #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE */
/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/
#define CONFIG_SYS_GBL_DATA_SIZE 128
#define CONFIG_SYS_INIT_RAM_ADDR 0x40000000
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_LOWBOOT
-#define CONFIG_SYS_FLASH_BASE TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_FLASH_SIZE 0x00800000
/*
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT 1
#endif
/*
* U-Boot memory configuration
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#undef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_INIT_RAM_LOCK
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFFF00000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
#define CONFIG_SYS_EUMB_ADDR 0xFC000000
#define CONFIG_SYS_MAX_FLASH_SECT 256
#define CONFIG_SYS_LOWBOOT
-#define CONFIG_SYS_FLASH_BASE TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_FLASH_SIZE 0x00800000
/*
CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc() */
/*
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN 0x00030000
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_PRELIMBASE)
#define CONFIG_SYS_MAX_FLASH_BANKS 2
#define CONFIG_SYS_MAX_FLASH_SECT 1024
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=uramdisk\0" \
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if defined(CONFIG_SYS_SPL) || defined(CONFIG_RAMBOOT_NAND) \
|| defined(CONFIG_RAMBOOT_SDCARD) || defined(CONFIG_RAMBOOT_SPIFLASH)
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"loadaddr=1000000\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=rootfs.ext2.gz.uboot\0" \
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=p2020ds/ramdisk.uboot\0" \
#define CONFIG_SYS_FLASH_BASE 0xff000000
#define CONFIG_SYS_RESET_ADDRESS 0xfff00100
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
/* areas to map different things with the GT in physical space */
#define PLD_CONFIG_BASE 0x04001000 /* PLD (CS3) */
#define CONFIG_SYS_MONITOR_BASE 0xFFF00000
-/* CONFIG_SYS_FLASH_BASE */ /* TEXT_BASE is defined in the board config.mk file. */
+/* CONFIG_SYS_FLASH_BASE */ /* CONFIG_SYS_TEXT_BASE is defined in the board config.mk file. */
/* This adress is given to the linker with -Ttext to */
/* locate the text section at this adress. */
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 192 kB for Monitor */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CONFIG_SYS_GBL_DATA_SIZE 128 /* Global data size rsvd*/
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128*1024)
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_BASE (CONFIG_SYS_MONITOR_BASE - CONFIG_SYS_MALLOC_LEN)
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_MALLOC_BASE - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP CONFIG_SYS_GBL_DATA_OFFSET
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (1024 << 10)
/*
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* 128 kB for malloc() */
#define CONFIG_PRAM 0 /* use pram variable to overwrite */
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xfe000000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
/*
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*----------------------------------------------------------------------*/
-#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (1024 * 1024) /* Reserve 256 kB for malloc() */
#define CONFIG_PRAM 0 /* use pram variable to overwrite */
#define CONFIG_SYS_BOOT_BASE_ADDR 0xf0000000
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CONFIG_SYS_FLASH_BASE 0xfc000000 /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_NAND_ADDR 0xd0000000 /* NAND Flash */
#define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */
#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_OCM_BASE
#undef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/
#define CONFIG_SYS_GBL_DATA_SIZE 128
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFFC00000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#ifdef CONFIG_BZIP2
#define CONFIG_SYS_MALLOC_LEN (4096 << 10) /* Reserve ~4 MB for malloc() */
#undef CONFIG_SYS_SBC_BOOT_LOW
/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/sbc8260/config.mk
* The main FLASH is whichever is connected to *CS0. U-Boot expects
* this to be the SIMM.
*/
*/
#endif /* CONFIG_CMD_JFFS2 */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if 0
/* XXX This doesn't work and I don't want to fix it */
/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/tqm8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/tqm8260/config.mk
* The main FLASH is whichever is connected to *CS0.
*/
#define CONFIG_SYS_FLASH0_BASE 0x40000000
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
*/
#define CONFIG_SYS_NO_FLASH
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if !defined(CONFIG_NAND_SPL)
#define CONFIG_SYS_RAMBOOT
"ethprime=TSEC1\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"fdtaddr=ae0000\0" \
"fdtfile=" MK_STR(CONFIG_FDTFILE) "\0" \
"console=ttyS0\0" \
#else
#undef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/
#define CONFIG_SYS_GBL_DATA_SIZE 128
#else
#undef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/
#define CONFIG_SYS_GBL_DATA_SIZE 128
#define CONFIG_TIMESTAMP /* display image timestamps */
-#if (TEXT_BASE == 0xFC000000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) /* Boot low */
# define CONFIG_SYS_LOWBOOT 1
#endif
/*
* Flash configuration
*/
-#define CONFIG_SYS_FLASH_BASE TEXT_BASE /* 0xFC000000 */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE /* 0xFC000000 */
/* use CFI flash driver */
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
/*
* MUST be low boot - HIGHBOOT is not supported anymore
*/
-#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CONFIG_SYS_LOWBOOT 1
# define CONFIG_SYS_LOWBOOT16 1
#else
-# error "TEXT_BASE must be 0xff000000"
+# error "CONFIG_SYS_TEXT_BASE must be 0xff000000"
#endif
/*
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
* adresses
*/
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
/*-----------------------------------------------------------------------
#define CONFIG_TIMESTAMP /* display image timestamps */
-#if (TEXT_BASE != 0xFFF00000)
+#if (CONFIG_SYS_TEXT_BASE != 0xFFF00000)
# define CONFIG_SYS_LOWBOOT 1 /* Boot low */
#endif
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/tqm8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/tqm8260/config.mk
* The main FLASH is whichever is connected to *CS0.
*/
#define CONFIG_SYS_FLASH0_BASE 0x40000000
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (512 << 10) /* Reserve 512 kB for malloc()*/
/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/tqm8272/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/tqm8272/config.mk
* The main FLASH is whichever is connected to *CS0.
*/
#define CONFIG_SYS_FLASH0_BASE 0x40000000
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH0_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
/*
* Monitor config
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT
* NAND flash support (disabled by default)
*
* Warning: NAND support will likely increase the U-Boot image size
- * to more than 256 KB. Please adjust TEXT_BASE if necessary.
+ * to more than 256 KB. Please adjust CONFIG_SYS_TEXT_BASE if necessary.
*/
#ifdef CONFIG_TQM8548_BE
#define CONFIG_NAND
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
/*
* Note: when changing the Local Bus clock divider you have to
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_LEN (~TEXT_BASE + 1)/* Reserved for Monitor */
+#define CONFIG_SYS_MONITOR_LEN (~CONFIG_SYS_TEXT_BASE + 1)/* Reserved for Monitor */
#define CONFIG_SYS_MALLOC_LEN (384 * 1024) /* Reserved for malloc */
/* Serial Port */
MK_STR(CONFIG_HOSTNAME)".dtb\0"
#define CONFIG_ENV_BOOTFILE "bootfile="MK_STR(CONFIG_HOSTNAME)"/uImage\0"
#define CONFIG_ENV_UBOOT "uboot="MK_STR(CONFIG_HOSTNAME)"/u-boot.bin\0" \
- "uboot_addr="MK_STR(TEXT_BASE)"\0"
+ "uboot_addr="MK_STR(CONFIG_SYS_TEXT_BASE)"\0"
#define CONFIG_EXTRA_ENV_SETTINGS \
CONFIG_ENV_BOOTFILE \
#define CONFIG_CMD_USB
-#if (TEXT_BASE == 0xFE000000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low */
# define CONFIG_SYS_LOWBOOT 1
#endif
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFFF80000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (2 * 1024*1024) /* Reserve 2 MB for malloc() */
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_MONITOR_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_LEN (~(TEXT_BASE) + 1)
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_LEN (~(CONFIG_SYS_TEXT_BASE) + 1)
#define CONFIG_SYS_MALLOC_LEN (256 * 1024)
#if (CONFIG_SYS_MONITOR_BASE < FLASH_BASE0_PRELIM)
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_SIZE (32*1024*1024)
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_FLASH (CONFIG_SYS_FLASH_BASE + CONFIG_SYS_MONITOR_OFFSET)
#define CONFIG_SYS_MONITOR_LEN 0x00020000
#define CONFIG_SYS_MALLOC_LEN 0x00020000
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xff000000 /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */
#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */
#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */
* ff000000 - ffbfffff OS Use/Filesystem (12MB)
*/
-#define CONFIG_UBOOT_ENV_ADDR MK_STR(TEXT_BASE)
+#define CONFIG_UBOOT_ENV_ADDR MK_STR(CONFIG_SYS_TEXT_BASE)
#define CONFIG_FDT_ENV_ADDR MK_STR(0xfff00000)
#define CONFIG_OS_ENV_ADDR MK_STR(0xffc00000)
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff00000, 0xc0000}, \
{0xf7f00000, 0xc0000} }
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */
/*
BATL_PP_RW |\
BATL_CACHEINHIBIT |\
BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U_EARLY (TEXT_BASE |\
+#define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE |\
BATU_BL_1M |\
BATU_VS |\
BATU_VP)
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \
{0xfbf40000, 0xc0000} }
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
/*
* Chip select configuration
#define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
#define CONFIG_SYS_FLASH_AUTOPROTECT_LIST { {0xfff40000, 0xc0000}, \
{0xf7f40000, 0xc0000} }
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
/*
* Chip select configuration
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define BOOTFLAG_COLD 0x01 /* Normal Power-On: Boot from FLASH */
#define BOOTFLAG_WARM 0x02 /* Software reboot */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_TIMESTAMP /* display image timestamps */
-#if (TEXT_BASE == 0xFC000000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) /* Boot low */
# define CONFIG_SYS_LOWBOOT 1
#endif
/*
* Flash configuration
*/
-#define CONFIG_SYS_FLASH_BASE TEXT_BASE /* 0xFC000000 */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE /* 0xFC000000 */
/* use CFI flash driver if no module variant is spezified */
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define __AMCC_COMMON_H
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of U-Boot */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */
#define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */
CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (384 * 1024)
#ifdef CONFIG_FSL_DIU_FB
#define PHYS_FLASH_BANK_SIZE 0x01000000 /* 16 MB Banks */
#define PHYS_FLASH_SECT_SIZE 0x00040000 /* 256 KB sectors (x2) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */
#if CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE
*/
#ifdef CONFIG_RAM
#define CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_TEXT_BASE 0x40020000
+#define CONFIG_SYS_TEXT_BASE 0x40020000
#define ENABLE_JFFS 0
#else
-#define CONFIG_TEXT_BASE 0x00000000
+#define CONFIG_SYS_TEXT_BASE 0x00000000
#define ENABLE_JFFS 1
#endif
#define CONFIG_SYS_FLASH_BASE 0x00000000
#ifdef CONFIG_MONITOR_IS_IN_RAM
-#define CONFIG_SYS_MONITOR_BASE CONFIG_TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#else
/* This is mainly used during relocation in start.S */
#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_FLASH_BASE + 0x400)
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_SDRAM_MAX_SIZE 0x08000000 /* max. 128 MB */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
#else
#undef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_MONITOR_LEN 0x00030000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_GBL_DATA_SIZE 128
/*
* MUST be low boot - HIGHBOOT is not supported anymore
*/
-#if (TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low with 32 MB Flash */
# define CONFIG_SYS_LOWBOOT 1
# define CONFIG_SYS_LOWBOOT16 1
#else
-# error "TEXT_BASE must be 0xFE000000"
+# error "CONFIG_SYS_TEXT_BASE must be 0xFE000000"
#endif
/*
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (384 << 10) /* 384 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* 256 kB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* initial mem map for Linux */
#define ANYBUS_BASE 0x03010000 /* Anybus Module */
#define CONFIG_SYS_RESET_ADRESS 0x01000000 /* Adress which causes reset */
-#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* TEXT_BASE is defined in the board config.mk file. */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_FLASH_BASE /* CONFIG_SYS_TEXT_BASE is defined in the board config.mk file. */
/* This adress is given to the linker with -Ttext to */
/* locate the text section at this adress. */
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
*
* Setting #if 0: u-boot will start from flash and relocate itself to RAM
*
- * Please do not forget to modify the setting of TEXT_BASE
+ * Please do not forget to modify the setting of CONFIG_SYS_TEXT_BASE
* in board/cobra5272/config.mk accordingly (#if 0: 0xffe00000; #if 1: 0x20000)
*
* ---
#else
#define CONFIG_SYS_FLASH_BASE CMA_MB_FLASH_BASE /* flash on m/b */
#endif
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc()*/
* (the *_SIZE vars must be a power of 2)
*/
-#define CONFIG_SYS_CMA_CS0_BASE TEXT_BASE /* EPROM */
+#define CONFIG_SYS_CMA_CS0_BASE CONFIG_SYS_TEXT_BASE /* EPROM */
#define CONFIG_SYS_CMA_CS0_SIZE (1 << 20)
#if 0
#define CONFIG_SYS_CMA_CS2_BASE 0x10000000 /* Local Bus SDRAM */
#else
#define CONFIG_SYS_FLASH_BASE CMA_MB_FLASH_BASE /* flash on m/b */
#endif
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
* (the *_SIZE vars must be a power of 2)
*/
-#define CONFIG_SYS_CMA_CS0_BASE TEXT_BASE /* EPROM */
+#define CONFIG_SYS_CMA_CS0_BASE CONFIG_SYS_TEXT_BASE /* EPROM */
#define CONFIG_SYS_CMA_CS0_SIZE (1 << 20)
#define CONFIG_SYS_CMA_CS1_BASE CMA_MB_RAM_BASE /* RAM + I/O SLOT 1 */
#define CONFIG_SYS_CMA_CS1_SIZE (64 << 20)
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_FLASH_EMPTY_INFO
#define CONFIG_SYS_FLASH_AMD_CHECK_DQ7
"bank_intlv=cs0_cs1\0" \
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
- "ubootaddr=" MK_STR(TEXT_BASE) "\0" \
+ "ubootaddr=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0" \
"tftpflash=tftpboot $loadaddr $uboot && " \
"protect off $ubootaddr +$filesize && " \
"erase $ubootaddr +$filesize && " \
#define CONFIG_CMD_EXT2
#define CONFIG_CMD_DATE
-#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CONFIG_SYS_LOWBOOT 1
# define CONFIG_SYS_LOWBOOT16 1
#endif
-#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
# define CONFIG_SYS_LOWBOOT 1
# define CONFIG_SYS_LOWBOOT08 1
#endif
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFE000000
#define CONFIG_SYS_FLASH_SIZE 0x02000000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 KB for malloc() */
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFF800000
#define CONFIG_SYS_FLASH_SIZE 0x00800000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 KB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 KB for malloc() */
#define CONFIG_FLASH_CFI_DRIVER 1
/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#else
#undef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/*#define CONFIG_SYS_GBL_DATA_SIZE 256*/
#define CONFIG_SYS_GBL_DATA_SIZE 128
#define CONFIG_CMD_SPI
#define CONFIG_CMD_USB
-#if (TEXT_BASE == 0xFF000000)
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000)
#define CONFIG_SYS_LOWBOOT 1
#endif
(CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_STACK_SIZE 0x8000 /* Size of bootloader stack */
#define CONFIG_SYS_BL_START_FLASH 0x38040000 /* Address of relocated code */
#define CONFIG_SYS_BL_START_RAM 0x03fd0000 /* Address of relocated code */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Mon */
#define CONFIG_SYS_FLASH_BASE 0x38000000 /* Boot Flash */
#define CONFIG_SYS_FLASH_BASE_1 0x10000000 /* StrataFlash 1 */
#undef CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/*-----------------------------------------------------------------------
* Definitions for initial stack pointer and data area
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
#endif
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/ep8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/ep8260/config.mk
* The main FLASH is whichever is connected to *CS0. U-Boot expects
* this to be the SIMM.
*/
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
* Note also that the logic that sets CONFIG_SYS_RAMBOOT is platform dependent.
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_I2C_SLAVE 0x7F /* I2C slave address */
#endif
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
-#if (TEXT_BASE == 0xFE000000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFE000000) /* Boot low */
#define CONFIG_SYS_LOWBOOT 1
#endif
/* RAMBOOT will be defined automatically in memory section */
CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
#define CONFIG_SYS_STACK_SIZE (0x10000-32)
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
/*
* Ethernet configuration uses on board SMC91C111
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
#define CONFIG_SYS_STACK_SIZE (0x10000-32)
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
/*
* Ethernet configuration uses on board SMC91C111, however if a mezzanine
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
#define CONFIG_SYS_STACK_SIZE (0x10000-32)
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
/*
* Ethernet configuration
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
#define CONFIG_SYS_STACK_SIZE (0x10000-32)
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
/*
* Ethernet configuration
#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_PROM_OFFSET-32)
#define CONFIG_SYS_STACK_SIZE (0x10000-32)
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_RELOC_MONITOR_BASE (CONFIG_SYS_RELOC_MONITOR_MAX_END-CONFIG_SYS_MONITOR_LEN)
/* make un relocated address from relocated address */
-#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-TEXT_BASE))
+#define UN_RELOC(address) (address-(CONFIG_SYS_RELOC_MONITOR_BASE-CONFIG_SYS_TEXT_BASE))
/*
* Ethernet configuration
#define PHYS_FLASH 0xbfc00000 /* Flash Bank #1 */
/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#define CONFIG_SYS_SBC_BOOT_LOW 1
/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/sbc8260/config.mk
* The main FLASH is whichever is connected to *CS0. U-Boot expects
* this to be the SIMM.
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/* ... with on-chip memory here (4KBytes) */
#define CONFIG_SYS_OCM_DATA_ADDR 0xF4000000
#define CONFIG_SYS_BOOT_BASE_ADDR 0xfff00000
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */
#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_OCM_BASE
#define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
-#if (TEXT_BASE == 0xFFF00000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFFF00000) /* Boot low */
# define CONFIG_SYS_LOWBOOT 1
#endif
#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
#define CONFIG_SYS_MAX_FLASH_SECT 67 /* max num of sects on one chip */
-#define CONFIG_ENV_ADDR (TEXT_BASE+0x40000) /* second sector */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks
(= chip selects) */
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
* Please note that CONFIG_SYS_SDRAM_BASE _must_ start at 0
*/
#define CONFIG_SYS_SDRAM_BASE 0x00000000
-#define CONFIG_SYS_FLASH_BASE TEXT_BASE
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_FPGA_BASE 0x80000000
/*
* unfortunately, CONFIG_SYS_MONITOR_LEN must include the
#define PHYS_FLASH_2 0xb0800000 /* Flash Bank #2 */
/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
-#if (TEXT_BASE == 0xFFE00000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFFE00000) /* Boot low */
# define CONFIG_SYS_LOWBOOT 1
#endif
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_MAX_FLASH_SECT 128 /* max num of sects on one chip */
-#define CONFIG_ENV_ADDR (TEXT_BASE + 0x40000) /* third sector */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE + 0x40000) /* third sector */
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (in ms) */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_FLASH_BASE 0xF0000000
#define CONFIG_SYS_PIGGY_BASE 0xE8000000
#define CONFIG_SYS_PIGGY_SIZE 128
#define CONFIG_SYS_FLASH1_MAX_SIZE 0x08000000
#define CONFIG_SYS_FLASH1_ADDR (CONFIG_SYS_FLASH1_TOP - CONFIG_SYS_FLASH1_MAX_SIZE)
#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_FLASH1_ADDR /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_OCM_BASE 0xe0010000 /* ocm */
#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_OCM_BASE
#define CONFIG_SYS_PCI_BASE 0xe0000000 /* Internal PCI regs */
#define CONFIG_VERY_BIG_RAM
#define CONFIG_SYS_MONITOR_LEN 0x00040000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN (512 << 10)
#define CONFIG_SYS_BOOTMAPSZ (8 << 20)
#define CONFIG_SYS_FLASH_BASE 0xFFC00000
#define CONFIG_SYS_FLASH_SIZE 0x00400000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_RESET_ADDRESS 0xFFF00100
#define CONFIG_SYS_EUMB_ADDR 0x80000000
#endif
/*-----------------------------------------------------------------------
- * Change TEXT_BASE in bord/linkstation/config.mk to get a RAM build
+ * Change CONFIG_SYS_TEXT_BASE in bord/linkstation/config.mk to get a RAM build
*
* RAM based builds are for testing purposes. A Linux module, uloader.o,
* exists to load U-Boot and pass control to it
* Base addresses -- Note these are effective addresses where the
* actual resources get mapped (not physical addresses)
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of U-Boot */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */
#define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
#define CONFIG_SYS_MALLOC_LEN (1 << 20) /* Reserved for malloc */
"u-boot=" xstr(CONFIG_HOSTNAME) "/u-boot.bin \0" \
"u-boot_addr_r=200000\0" \
"load=tftp ${u-boot_addr_r} ${u-boot}\0" \
- "update=protect off " xstr(TEXT_BASE) " +${filesize};" \
- "erase " xstr(TEXT_BASE) " +${filesize};" \
- "cp.b ${u-boot_addr_r} " xstr(TEXT_BASE) \
+ "update=protect off " xstr(CONFIG_SYS_TEXT_BASE) " +${filesize};" \
+ "erase " xstr(CONFIG_SYS_TEXT_BASE) " +${filesize};" \
+ "cp.b ${u-boot_addr_r} " xstr(CONFIG_SYS_TEXT_BASE) \
" ${filesize};" \
- "protect on " xstr(TEXT_BASE) " +${filesize}\0" \
+ "protect on " xstr(CONFIG_SYS_TEXT_BASE) " +${filesize}\0" \
""
#define CONFIG_BOOTCOMMAND "run net_nfs"
#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200,\
230400 }
-#if (TEXT_BASE == 0xFFF00000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFFF00000) /* Boot low */
# define CONFIG_SYS_LOWBOOT 1
#endif
#define CONFIG_SYS_FLASH_SIZE 0x00800000 /* 8 MByte */
-#define CONFIG_ENV_ADDR (TEXT_BASE+0x40000) /* second sector */
+#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE+0x40000) /* second sector */
#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max num of flash banks
(= chip selects) */
#define CONFIG_SYS_FLASH_ERASE_TOUT 240000 /* Flash Erase Timeout [ms]*/
#define CONFIG_SYS_INIT_RAM_END MPC5XXX_SRAM_SIZE
#endif
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
"rootpath=/opt/eldk/ppc_6xx\0" \
"bootfile=/tftpboot/" CONFIG_SYS__BOARDNAME "/uImage\0" \
"load=tftp 200000 /tftpboot/" CONFIG_SYS__BOARDNAME "/u-boot.bin\0" \
- "text_base=" MK_STR(TEXT_BASE) "\0" \
+ "text_base=" MK_STR(CONFIG_SYS_TEXT_BASE) "\0" \
"kernel_addr=0xFC0C0000\0" \
"update=protect off ${text_base} +${filesize};" \
"era ${text_base} +${filesize};" \
#define CONFIG_ENV_OVERWRITE 1 /* allow modification of vendor params */
-#if TEXT_BASE == CONFIG_SYS_FLASH_BASE
+#if CONFIG_SYS_TEXT_BASE == CONFIG_SYS_FLASH_BASE
#define CONFIG_SYS_LOWBOOT 1
#endif
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
/* ... with on-chip memory here (4KBytes) */
#define CONFIG_SYS_OCM_DATA_ADDR 0xF4000000
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Monitor length */
#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Malloc size */
#define CONFIG_CMD_ELF
-#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CONFIG_SYS_LOWBOOT 1
# define CONFIG_SYS_LOWBOOT16 1
#endif
-#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
# define CONFIG_SYS_LOWBOOT 1
# define CONFIG_SYS_LOWBOOT08 1
#endif
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
CONFIG_SYS_FLASH_BASE_1, \
CONFIG_SYS_FLASH_BASE_2 }
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#endif
#endif
/* setting reset address */
-/*#define CONFIG_SYS_RESET_ADDRESS TEXT_BASE*/
+/*#define CONFIG_SYS_RESET_ADDRESS CONFIG_SYS_TEXT_BASE*/
/* ethernet */
#ifdef XILINX_EMACLITE_BASEADDR
/*
* memory layout - Example
- * TEXT_BASE = 0x1200_0000;
+ * CONFIG_SYS_TEXT_BASE = 0x1200_0000;
* CONFIG_SYS_SRAM_BASE = 0x1000_0000;
* CONFIG_SYS_SRAM_SIZE = 0x0400_0000;
*
*
* 0x1000_0000 CONFIG_SYS_SDRAM_BASE
* FREE
- * 0x1200_0000 TEXT_BASE
+ * 0x1200_0000 CONFIG_SYS_TEXT_BASE
* U-BOOT code
* 0x1202_0000
* FREE
* (e.g., by the BDI). Otherwise we must specify the default boot-up value of
* MBAR, as given in the doccumentation.
*/
-#if TEXT_BASE == 0x00100000
+#if CONFIG_SYS_TEXT_BASE == 0x00100000
#define CONFIG_SYS_DEFAULT_MBAR 0xf0000000
-#else /* TEXT_BASE != 0x00100000 */
+#else /* CONFIG_SYS_TEXT_BASE != 0x00100000 */
#define CONFIG_SYS_DEFAULT_MBAR 0x80000000
#define CONFIG_SYS_LOWBOOT 1
-#endif /* TEXT_BASE == 0x00100000 */
+#endif /* CONFIG_SYS_TEXT_BASE == 0x00100000 */
/* Use SRAM until RAM will be available */
#define CONFIG_SYS_INIT_RAM_ADDR MPC5XXX_SRAM
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* Reserve 512 kB for Mon */
#ifdef CONFIG_FSL_DIU_FB
#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* Reserved for malloc */
#define CONFIG_SYS_RESET_ADDRESS 0x3fffff00
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* u-boot code base */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* u-boot code base */
#define CONFIG_SYS_MALLOC_LEN (256 << 10) /* Reserve 256 kB for malloc */
/* Peripheral Device section */
/*
* The reserved memory
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_MONITOR_LEN (384 * 1024) /* Reserve 384 kB for Mon */
#define CONFIG_SYS_MALLOC_LEN (512 * 1024) /* Reserved for malloc */
#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END (TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
/* NOR Flash */
/* #define CONFIG_SYS_FLASH_BASE (0xA1000000)*/
#define CONFIG_SYS_FLASH_BANKS_LIST { CONFIG_SYS_FLASH_BASE }
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#endif
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
*/
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_OFFSET 0x40000
-#define CONFIG_ENV_ADDR (TEXT_BASE + CONFIG_ENV_OFFSET)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE + CONFIG_ENV_OFFSET)
#define CONFIG_ENV_SECT_SIZE 0x20000
#define CONFIG_ENV_SIZE 0x4000
#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SECT_SIZE)
-#define CONFIG_ENV_ADDR_REDUND (TEXT_BASE + CONFIG_ENV_OFFSET_REDUND)
+#define CONFIG_ENV_ADDR_REDUND (CONFIG_SYS_TEXT_BASE + CONFIG_ENV_OFFSET_REDUND)
#define CONFIG_ENV_SIZE_REDUND (CONFIG_ENV_SIZE)
#define CONFIG_ENV_OVERWRITE 1
#define __NETSTAL_COMMON_H
#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of U-Boot */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */
#define CONFIG_SYS_MONITOR_LEN (320 * 1024) /* Reserve 320 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (256 * 1024) /* Reserve 256 kB for malloc() */
#define CONFIG_CMD_PCI
-#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CONFIG_SYS_LOWBOOT 1
#else
-# error "TEXT_BASE must be 0xFF000000"
+# error "CONFIG_SYS_TEXT_BASE must be 0xFF000000"
#endif
/*
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10) /* Reserve 192 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
#define PHYS_FLASH_2 0xbfc00000 /* Flash Bank #2 */
/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
#define CONFIG_SYS_INIT_SP_OFFSET 0x4000000
#define CONFIG_TIMESTAMP 1 /* Print image info with timestamp */
-#if (TEXT_BASE == 0xFF000000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low */
#define CONFIG_SYS_LOWBOOT 1
#endif
/* RAMBOOT will be defined automatically in memory section */
CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_FDT_FIXUP_PARTITIONS
#endif
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of monitor */
#define CONFIG_SYS_MONITOR_LEN (512 * 1024) /* 512 kB for monitor */
#ifdef CONFIG_FSL_DIU_FB
#define CONFIG_SYS_MALLOC_LEN (6 * 1024 * 1024) /* for malloc */
#define CONFIG_CMD_PCI
-#if (TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF000000) /* Boot low with 16 MB Flash */
# define CONFIG_SYS_LOWBOOT 1
# define CONFIG_SYS_LOWBOOT16 1
#endif
-#if (TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
+#if (CONFIG_SYS_TEXT_BASE == 0xFF800000) /* Boot low with 8 MB Flash */
# define CONFIG_SYS_LOWBOOT 1
# define CONFIG_SYS_LOWBOOT08 1
#endif
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
* CONFIG_SYS_MALLOC_LEN - Size of malloc pool (128KB)
*/
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN 0x20000
#define CONFIG_SYS_PPMC_BOOT_LOW 1
/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/ppmc8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/ppmc8260/config.mk
* The main FLASH is whichever is connected to *CS0. U-Boot expects
* this to be the SIMM.
*/
#define PHYS_FLASH_1 0xb0000000 /* Flash Bank #1 */
/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
*/
/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#define CONFIG_SYS_FLASH_BASE 0xFFC00000
#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 kB for malloc() */
-#define CONFIG_SYS_MONITOR_BASE (TEXT_BASE)
+#define CONFIG_SYS_MONITOR_BASE (CONFIG_SYS_TEXT_BASE)
/*
* For booting Linux, the board info and command line data
#ifdef CONFIG_ENV_IS_IN_FLASH
#define CONFIG_ENV_SECT_SIZE 0x10000 /* size of one complete sector */
/* the environment is located before u-boot */
-#define CONFIG_ENV_ADDR (TEXT_BASE - CONFIG_ENV_SECT_SIZE)
+#define CONFIG_ENV_ADDR (CONFIG_SYS_TEXT_BASE - CONFIG_ENV_SECT_SIZE)
/* Address and size of Redundant Environment Sector */
#define CONFIG_ENV_ADDR_REDUND (CONFIG_ENV_ADDR - CONFIG_ENV_SECT_SIZE)
#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END (TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
#define CONFIG_SYS_LOAD_ADDR (CONFIG_SYS_SDRAM_BASE + 32 * 1024 * 1024)
/* Address of u-boot image in Flash */
#define CONFIG_SYS_BAUDRATE_TABLE { 115200, 57600, 38400, 19200, 9600 }
#define CONFIG_SYS_MEMTEST_START (CONFIG_SYS_SDRAM_BASE)
-#define CONFIG_SYS_MEMTEST_END (TEXT_BASE - 0x100000)
+#define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_TEXT_BASE - 0x100000)
/* Flash board support */
#define CONFIG_SYS_FLASH_BASE (0xA0000000)
#else
#define CONFIG_SYS_MONITOR_LEN (128 << 10) /* Reserve 128 kB for Monitor */
#endif
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
/*
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Timeout for Flash Write (in ms) */
#define CONFIG_ENV_IS_IN_FLASH 1
-#define CONFIG_ENV_ADDR ((TEXT_BASE) + 0x40000)
+#define CONFIG_ENV_ADDR ((CONFIG_SYS_TEXT_BASE) + 0x40000)
#define CONFIG_ENV_SECT_SIZE 0x40000 /* Total Size of Environment Sector */
#define CONFIG_ENV_SIZE CONFIG_ENV_SECT_SIZE /* Used size for environment */
#define CONFIG_SYS_SBC_BOOT_LOW 1
/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/sacsng/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/sacsng/config.mk
* The main FLASH is whichever is connected to *CS0.
*/
#define CONFIG_SYS_FLASH0_BASE 0x40000000
#define CONFIG_SYS_EUMB_ADDR 0xFCE00000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CONFIG_SYS_SBC_BOOT_LOW 1
/* What should the base address of the main FLASH be and how big is
- * it (in MBytes)? This must contain TEXT_BASE from board/sbc8260/config.mk
+ * it (in MBytes)? This must contain CONFIG_SYS_TEXT_BASE from board/sbc8260/config.mk
* The main FLASH is whichever is connected to *CS0. U-Boot expects
* this to be the SIMM.
*/
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_FLASH_CFI_DRIVER
#define CONFIG_SYS_FLASH_CFI
/*
* For soldered on flash, (128kB/sector) we use 2 sectors for u-boot and
- * one for env+bootpg (TEXT_BASE=0xfffa_0000, 384kB total). For SODIMM
+ * one for env+bootpg (CONFIG_SYS_TEXT_BASE=0xfffa_0000, 384kB total). For SODIMM
* flash (512kB/sector) we use 1 sector for u-boot, and one for env+bootpg
- * (TEXT_BASE=0xfff0_0000, 1MB total). This dynamically sets the right
+ * (CONFIG_SYS_TEXT_BASE=0xfff0_0000, 1MB total). This dynamically sets the right
* thing for MONITOR_LEN in both cases.
*/
-#define CONFIG_SYS_MONITOR_LEN (~TEXT_BASE + 1)
+#define CONFIG_SYS_MONITOR_LEN (~CONFIG_SYS_TEXT_BASE + 1)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserved for malloc */
/* Serial Port */
*/
#define CONFIG_ENV_IS_IN_FLASH 1
#define CONFIG_ENV_SIZE 0x2000
-#if TEXT_BASE == 0xfff00000 /* Boot from 64MB SODIMM */
+#if CONFIG_SYS_TEXT_BASE == 0xfff00000 /* Boot from 64MB SODIMM */
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x80000)
#define CONFIG_ENV_SECT_SIZE 0x80000 /* 512K(one sector) for env */
-#elif TEXT_BASE == 0xfffa0000 /* Boot from 8MB soldered flash */
+#elif CONFIG_SYS_TEXT_BASE == 0xfffa0000 /* Boot from 8MB soldered flash */
#define CONFIG_ENV_ADDR (CONFIG_SYS_MONITOR_BASE + 0x40000)
#define CONFIG_ENV_SECT_SIZE 0x20000 /* 128K(one sector) for env */
#else
"netdev=eth0\0" \
"uboot=" MK_STR(CONFIG_UBOOTPATH) "\0" \
"tftpflash=tftpboot $loadaddr $uboot; " \
- "protect off " MK_STR(TEXT_BASE) " +$filesize; " \
- "erase " MK_STR(TEXT_BASE) " +$filesize; " \
- "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; " \
- "protect on " MK_STR(TEXT_BASE) " +$filesize; " \
- "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0" \
+ "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; " \
+ "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; " \
+ "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0" \
"consoledev=ttyS0\0" \
"ramdiskaddr=2000000\0" \
"ramdiskfile=uRamdisk\0" \
#define CONFIG_SYS_FLASH_ERASE_TOUT 200000 /* Timeout for Flash Erase (in ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 50000 /* Timeout for Flash Write (in ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if 0
/* XXX This doesn't work and I don't want to fix it */
#undef CONFIG_SYS_FLASH_CHECKSUM
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_MONITOR_BASE_EARLY 0xfff00000 /* early monitor loc */
#define CONFIG_FLASH_CFI_DRIVER
/* Map the last 1M of flash where we're running from reset */
#define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
| BATL_CACHEINHIBIT | BATL_GUARDEDSTORAGE)
-#define CONFIG_SYS_DBAT6U_EARLY (TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
+#define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE | BATU_BL_1M | BATU_VS | BATU_VP)
#define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY | BATL_PP_RW \
| BATL_MEMCOHERENCE)
#define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
#define CONFIG_SYS_SDRAM_BASE 0x00000000
#define CONFIG_SYS_FLASH_BASE 0xFFE00000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* Start of U-Boot */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* Start of U-Boot */
#define CONFIG_SYS_MONITOR_LEN (0xFFFFFFFF - CONFIG_SYS_MONITOR_BASE + 1)
#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Reserve 128 KiB for malloc() */
/*
* Define this if you want support for video console with radeon 9200 pci card
- * Also set TEXT_BASE to 0xFFF80000 in board/amcc/sequoia/config.mk in this case
+ * Also set CONFIG_SYS_TEXT_BASE to 0xFFF80000 in board/amcc/sequoia/config.mk in this case
*/
#undef CONFIG_VIDEO
/* input clock of PLL: SMDK6400 has 12MHz input clock */
#define CONFIG_SYS_CLK_FREQ 12000000
-#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
+#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
#define CONFIG_ENABLE_MMU
#endif
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* 256 KiB */
#define CONFIG_IDENT_STRING " for SMDKC100"
-#if !defined(CONFIG_NAND_SPL) && (TEXT_BASE >= 0xc0000000)
+#if !defined(CONFIG_NAND_SPL) && (CONFIG_SYS_TEXT_BASE >= 0xc0000000)
#define CONFIG_ENABLE_MMU
#endif
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#define CONFIG_SYS_LBC_LCRR 0x00030004 /* LB clock ratio reg */
#define CONFIG_SYS_LBC_LBCR 0x00000000 /* LB config reg */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
*/
#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 KB for monitor */
#ifdef CONFIG_BZIP2
#define CONFIG_TIMESTAMP /* display image timestamps */
-#if (TEXT_BASE == 0xFC000000) /* Boot low */
+#if (CONFIG_SYS_TEXT_BASE == 0xFC000000) /* Boot low */
# define CONFIG_SYS_LOWBOOT 1
#endif
/*
* Flash configuration
*/
-#define CONFIG_SYS_FLASH_BASE TEXT_BASE /* 0xFC000000 */
+#define CONFIG_SYS_FLASH_BASE CONFIG_SYS_TEXT_BASE /* 0xFC000000 */
/* use CFI flash driver if no module variant is spezified */
#define CONFIG_SYS_FLASH_CFI 1 /* Flash is CFI conformant */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SYS_OR1_PRELIM 0xffff0ff7 /* 64K is enough */
#define CONFIG_SYS_LBC_LCLDEVS_BASE 0xfc000000 /* Base of localbus devices */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_BR1_PRELIM 0xFB001801 /* 32-bit port */
#define CONFIG_SYS_OR1_PRELIM 0xFFFF0FF7 /* 64K is enough */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#define PHYS_FLASH_1 0xbfc00000 /* Flash Bank #1 */
/* The following #defines are needed to get flash environment right */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 << 10)
#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
#define CONFIG_TNETV107X
#define CONFIG_TNETV107X_EVM
#define CONFIG_ARCH_CPU_INIT
-#define CONFIG_SYS_UBOOT_BASE TEXT_BASE
+#define CONFIG_SYS_UBOOT_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_DISABLE_TCM
#define CONFIG_PERIPORT_REMAP
#define CONFIG_PERIPORT_BASE 0x2000000
#define CONFIG_SYS_EUMB_ADDR 0xFC000000
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10) /* Reserve 256 kB for Monitor */
#define CONFIG_SYS_MALLOC_LEN (128 << 10) /* Reserve 128 kB for malloc() */
#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
#define CONFIG_SYS_INIT_SP_OFFSET CONFIG_SYS_GBL_DATA_OFFSET
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
# define CONFIG_SYS_RAMBOOT 1
#endif
#define CONFIG_SKIP_LOWLEVEL_INIT /* SDRAM is initialized by the bootstrap code */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (256 << 10)
#define CONFIG_STACKSIZE (256 << 10)
#define CONFIG_SYS_MALLOC_LEN (1 << 20)
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase Timeout (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write Timeout (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
#define CONFIG_SYS_FLASH_ERASE_TOUT 60000 /* Flash Erase TO (ms) */
#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO (ms) */
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* start of monitor */
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE /* start of monitor */
#if (CONFIG_SYS_MONITOR_BASE < CONFIG_SYS_FLASH_BASE)
#define CONFIG_SYS_RAMBOOT
/*Mem Map*/
#define CONFIG_SYS_SDRAM_BASE 0x0
-#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+#define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
#define CONFIG_SYS_MONITOR_LEN (192 * 1024)
#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 128 * 1024)
include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
#
#
-# TEXT_BASE for SPL:
+# CONFIG_SYS_TEXT_BASE for SPL:
#
# On 4xx platforms the SPL is located at 0xfffff000...0xffffffff,
# in the last 4kBytes of memory space in cache.
# We will copy this SPL into internal SRAM in start.S. So we set
-# TEXT_BASE to starting address in internal SRAM here.
+# CONFIG_SYS_TEXT_BASE to starting address in internal SRAM here.
#
-TEXT_BASE = 0xf8004000
+CONFIG_SYS_TEXT_BASE = 0xf8004000
# PAD_TO used to generate a 16kByte binary needed for the combined image
-# -> PAD_TO = TEXT_BASE + 0x4000
+# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 0x4000
PAD_TO = 0xf8008000
ifeq ($(debug),1)
include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
#
#
-# TEXT_BASE for SPL:
+# CONFIG_SYS_TEXT_BASE for SPL:
#
# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff,
# in the last 4kBytes of memory space in cache.
# We will copy this SPL into instruction-cache in start.S. So we set
-# TEXT_BASE to starting address in i-cache here.
+# CONFIG_SYS_TEXT_BASE to starting address in i-cache here.
#
-TEXT_BASE = 0x00800000
+CONFIG_SYS_TEXT_BASE = 0x00800000
# PAD_TO used to generate a 16kByte binary needed for the combined image
-# -> PAD_TO = TEXT_BASE + 0x4000
+# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 0x4000
PAD_TO = 0x00804000
PLATFORM_CPPFLAGS += -DCONFIG_440=1
include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
#
#
-# TEXT_BASE for SPL:
+# CONFIG_SYS_TEXT_BASE for SPL:
#
# On 460EX platforms the SPL is located at 0xfffff000...0xffffffff,
# in the last 4kBytes of memory space in cache.
# We will copy this SPL into internal SRAM in start.S. So we set
-# TEXT_BASE to starting address in internal SRAM here.
+# CONFIG_SYS_TEXT_BASE to starting address in internal SRAM here.
#
-TEXT_BASE = 0xE3003000
+CONFIG_SYS_TEXT_BASE = 0xE3003000
# PAD_TO used to generate a 128kByte binary needed for the combined image
-# -> PAD_TO = TEXT_BASE + 0x20000
+# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 0x20000
PAD_TO = 0xE3023000
PLATFORM_CPPFLAGS += -DCONFIG_440=1
include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
#
#
-# TEXT_BASE for SPL:
+# CONFIG_SYS_TEXT_BASE for SPL:
#
# On 4xx platforms the SPL is located at 0xfffff000...0xffffffff,
# in the last 4kBytes of memory space in cache.
# We will copy this SPL into SDRAM since we can't access the NAND
# controller at CS0 while running from this location. So we set
-# TEXT_BASE to starting address in SDRAM here.
+# CONFIG_SYS_TEXT_BASE to starting address in SDRAM here.
#
-TEXT_BASE = 0x00800000
+CONFIG_SYS_TEXT_BASE = 0x00800000
# PAD_TO used to generate a 16kByte binary needed for the combined image
-# -> PAD_TO = TEXT_BASE + 0x4000
+# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 0x4000
PAD_TO = 0x00804000
ifeq ($(debug),1)
include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
#
#
-# TEXT_BASE for SPL:
+# CONFIG_SYS_TEXT_BASE for SPL:
#
# On 440EP(x) platforms the SPL is located at 0xfffff000...0xffffffff,
# in the last 4kBytes of memory space in cache.
# We will copy this SPL into internal SRAM in start.S. So we set
-# TEXT_BASE to starting address in internal SRAM here.
+# CONFIG_SYS_TEXT_BASE to starting address in internal SRAM here.
#
-TEXT_BASE = 0xE0013000
+CONFIG_SYS_TEXT_BASE = 0xE0013000
# PAD_TO used to generate a 16kByte binary needed for the combined image
-# -> PAD_TO = TEXT_BASE + 0x4000
+# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 0x4000
PAD_TO = 0xE0017000
PLATFORM_CPPFLAGS += -DCONFIG_440=1
#
NAND_SPL := y
-TEXT_BASE := 0xfff00000
+CONFIG_SYS_TEXT_BASE := 0xfff00000
PAD_TO := 0xfff04000
include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
#
NAND_SPL := y
-TEXT_BASE := 0xfff00000
+CONFIG_SYS_TEXT_BASE := 0xfff00000
PAD_TO := 0xfff04000
include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
#
NAND_SPL := y
-TEXT_BASE := 0xfff00000
+CONFIG_SYS_TEXT_BASE := 0xfff00000
PAD_TO := 0xfff01000
include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
#
NAND_SPL := y
-TEXT_BASE := 0xfff00000
+CONFIG_SYS_TEXT_BASE := 0xfff00000
PAD_TO := 0xfff01000
include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL
#
NAND_SPL := y
-TEXT_BASE := 0xfff00000
+CONFIG_SYS_TEXT_BASE := 0xfff00000
PAD_TO := 0xfff01000
include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/$(CPUDIR)/u-boot-nand_spl.lds
-LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_PRELOADER -DCONFIG_NAND_SPL
include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
#
# Samsung S3C64xx Reference Platform (smdk6400) board
-# TEXT_BASE for SPL:
+# CONFIG_SYS_TEXT_BASE for SPL:
#
# On S3C64xx platforms the SPL is located in SRAM at 0.
#
-# TEXT_BASE = 0
+# CONFIG_SYS_TEXT_BASE = 0
include $(TOPDIR)/board/$(BOARDDIR)/config.mk
# PAD_TO used to generate a 4kByte binary needed for the combined image
-# -> PAD_TO = TEXT_BASE + 4096
-PAD_TO := $(shell expr $$[$(TEXT_BASE) + 4096])
+# -> PAD_TO = CONFIG_SYS_TEXT_BASE + 4096
+PAD_TO := $(shell expr $$[$(CONFIG_SYS_TEXT_BASE) + 4096])
ifeq ($(debug),1)
PLATFORM_CPPFLAGS += -DDEBUG
#
NAND_SPL := y
-TEXT_BASE := 0xfff00000
+CONFIG_SYS_TEXT_BASE := 0xfff00000
include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
-LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(nandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_NAND_SPL
CFLAGS += -DCONFIG_NAND_SPL
#if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
void board_init_f (ulong bootflag)
{
- relocate_code (TEXT_BASE - TOTAL_MALLOC_LEN, NULL, TEXT_BASE);
+ relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, TEXT_BASE);
}
#endif
#if defined(CONFIG_ARM) && !defined(CONFIG_SYS_ARM_WITHOUT_RELOC)
void board_init_f (ulong bootflag)
{
- relocate_code (TEXT_BASE - TOTAL_MALLOC_LEN, NULL, TEXT_BASE);
+ relocate_code (CONFIG_SYS_TEXT_BASE - TOTAL_MALLOC_LEN, NULL, TEXT_BASE);
}
#endif
include $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/config.mk
LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot.onenand.lds
-LDFLAGS = -Bstatic -T $(onenandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(onenandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL
CFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL
OBJCFLAGS += --gap-fill=0x00
# Linux-Kernel is expected to be at 8000'8000, entry 8000'8000
# (mem base + reserved)
-TEXT_BASE = 0x00000000
+CONFIG_SYS_TEXT_BASE = 0x00000000
#endif
_TEXT_BASE:
- .word TEXT_BASE /* sdram load addr from config.mk */
+ .word CONFIG_SYS_TEXT_BASE /* sdram load addr from config.mk */
.globl lowlevel_init
lowlevel_init:
include $(TOPDIR)/config.mk
LDSCRIPT= $(TOPDIR)/onenand_ipl/board/$(BOARDDIR)/u-boot.onenand.lds
-LDFLAGS = -Bstatic -T $(onenandobj)u-boot.lds -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
+LDFLAGS = -Bstatic -T $(onenandobj)u-boot.lds -Ttext $(CONFIG_SYS_TEXT_BASE) $(PLATFORM_LDFLAGS)
AFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL
CFLAGS += -DCONFIG_PRELOADER -DCONFIG_ONENAND_IPL
OBJCFLAGS += --gap-fill=0x00
-TEXT_BASE = 0x5c03fc00
+CONFIG_SYS_TEXT_BASE = 0x5c03fc00
-idirafter $(OBJTREE)/include \
-I $(SRCTREE)/lib/libfdt \
-I $(SRCTREE)/tools \
- -DTEXT_BASE=$(TEXT_BASE) -DUSE_HOSTCC \
+ -DCONFIG_SYS_TEXT_BASE=$(CONFIG_SYS_TEXT_BASE) \
+ -DUSE_HOSTCC \
-D__KERNEL_STRICT_NAMES
projects / platform / kernel / u-boot.git / commitdiff