Kconfig: Drop CONFIG_CMD_DS4510

This option enables a command in the driver. But the functions defined by
the driver are not called anywhere else in U-Boot. So it does not seem
useful to have this driver without its commands.

Drop this option, move the header file out of the common include/
directory and make all the function static.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>

diff --git a/drivers/misc/ds4510.c b/drivers/misc/ds4510.c
index c08a0be..9ffdafc 100644 (file)
--- a/drivers/misc/ds4510.c
+++ b/drivers/misc/ds4510.c
@@ -12,7 +12,7 @@
 #include <common.h>
 #include <i2c.h>
 #include <command.h>
-#include <ds4510.h>
+#include "ds4510.h"
 
 /* Default to an address that hopefully won't corrupt other i2c devices */
 #ifndef CONFIG_SYS_I2C_DS4510_ADDR
@@ -35,7 +35,7 @@ enum {
 /*
  * Write to DS4510, taking page boundaries into account
  */
-int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count)
+static int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count)
 {
        int wrlen;
        int i = 0;
@@ -64,7 +64,7 @@ int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count)
 /*
  * General read from DS4510
  */
-int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count)
+static int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count)
 {
        return i2c_read(chip, offset, 1, buf, count);
 }
@@ -74,7 +74,7 @@ int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count)
  * nv = 0 - Writes to SEEPROM registers behave like EEPROM
  * nv = 1 - Writes to SEEPROM registers behave like SRAM
  */
-int ds4510_see_write(uint8_t chip, uint8_t nv)
+static int ds4510_see_write(uint8_t chip, uint8_t nv)
 {
        uint8_t data;
 
@@ -92,7 +92,7 @@ int ds4510_see_write(uint8_t chip, uint8_t nv)
 /*
  * Write de-assertion of reset signal delay
  */
-int ds4510_rstdelay_write(uint8_t chip, uint8_t delay)
+static int ds4510_rstdelay_write(uint8_t chip, uint8_t delay)
 {
        uint8_t data;
 
@@ -108,7 +108,7 @@ int ds4510_rstdelay_write(uint8_t chip, uint8_t delay)
 /*
  * Write pullup characteristics of IO pins
  */
-int ds4510_pullup_write(uint8_t chip, uint8_t val)
+static int ds4510_pullup_write(uint8_t chip, uint8_t val)
 {
        val &= DS4510_IO_MASK;
 
@@ -118,7 +118,7 @@ int ds4510_pullup_write(uint8_t chip, uint8_t val)
 /*
  * Read pullup characteristics of IO pins
  */
-int ds4510_pullup_read(uint8_t chip)
+static int ds4510_pullup_read(uint8_t chip)
 {
        uint8_t val;
 
@@ -131,7 +131,7 @@ int ds4510_pullup_read(uint8_t chip)
 /*
  * Write drive level of IO pins
  */
-int ds4510_gpio_write(uint8_t chip, uint8_t val)
+static int ds4510_gpio_write(uint8_t chip, uint8_t val)
 {
        uint8_t data;
        int i;
@@ -155,7 +155,7 @@ int ds4510_gpio_write(uint8_t chip, uint8_t val)
 /*
  * Read drive level of IO pins
  */
-int ds4510_gpio_read(uint8_t chip)
+static int ds4510_gpio_read(uint8_t chip)
 {
        uint8_t data;
        int val = 0;
@@ -175,7 +175,7 @@ int ds4510_gpio_read(uint8_t chip)
 /*
  * Read physical level of IO pins
  */
-int ds4510_gpio_read_val(uint8_t chip)
+static int ds4510_gpio_read_val(uint8_t chip)
 {
        uint8_t val;
 
@@ -185,7 +185,6 @@ int ds4510_gpio_read_val(uint8_t chip)
        return val & DS4510_IO_MASK;
 }
 
-#ifdef CONFIG_CMD_DS4510
 /*
  * Display DS4510 information
  */
@@ -384,4 +383,3 @@ U_BOOT_CMD(
        "ds4510 sram write addr off cnt\n"
        "       - read/write 'cnt' bytes at SRAM offset 'off'"
 );
-#endif /* CONFIG_CMD_DS4510 */

diff --git a/include/ds4510.h b/drivers/misc/ds4510.h
similarity index 75%
rename from include/ds4510.h
rename to drivers/misc/ds4510.h
index e54db35..a6c6c58 100644 (file)
--- a/include/ds4510.h
+++ b/drivers/misc/ds4510.h
@@ -50,14 +50,4 @@
 #define DS4510_SRAM                            0xfa
 #define DS4510_SRAM_SIZE                       0x06
 
-int ds4510_mem_write(uint8_t chip, int offset, uint8_t *buf, int count);
-int ds4510_mem_read(uint8_t chip, int offset, uint8_t *buf, int count);
-int ds4510_see_write(uint8_t chip, uint8_t nv);
-int ds4510_rstdelay_write(uint8_t chip, uint8_t delay);
-int ds4510_pullup_write(uint8_t chip, uint8_t val);
-int ds4510_pullup_read(uint8_t chip);
-int ds4510_gpio_write(uint8_t chip, uint8_t val);
-int ds4510_gpio_read(uint8_t chip);
-int ds4510_gpio_read_val(uint8_t chip);
-
 #endif /* __DS4510_H_ */

diff --git a/include/configs/xpedite517x.h b/include/configs/xpedite517x.h
index dae61b1..822f70e 100644 (file)
--- a/include/configs/xpedite517x.h
+++ b/include/configs/xpedite517x.h
@@ -502,7 +502,6 @@ extern unsigned long get_board_sys_clk(unsigned long dummy);
 /*
  * Command configuration.
  */
-#define CONFIG_CMD_DS4510
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_IRQ

diff --git a/include/configs/xpedite537x.h b/include/configs/xpedite537x.h
index ce1ff86..a12a3f8 100644 (file)
--- a/include/configs/xpedite537x.h
+++ b/include/configs/xpedite537x.h
@@ -354,7 +354,6 @@ extern unsigned long get_board_ddr_clk(unsigned long dummy);
 /*
  * Command configuration.
  */
-#define CONFIG_CMD_DS4510
 #define CONFIG_CMD_DTT
 #define CONFIG_CMD_EEPROM
 #define CONFIG_CMD_JFFS2

diff --git a/scripts/config_whitelist.txt b/scripts/config_whitelist.txt
index af253f4..f34fd67 100644 (file)
--- a/scripts/config_whitelist.txt
+++ b/scripts/config_whitelist.txt
@@ -383,7 +383,6 @@ CONFIG_CM922T_XA10
 CONFIG_CMDLINE_EDITING
 CONFIG_CMDLINE_PS_SUPPORT
 CONFIG_CMDLINE_TAG
-CONFIG_CMD_DS4510
 CONFIG_CMD_DTT
 CONFIG_CMD_ECCTEST
 CONFIG_CMD_EECONFIG