if (argc < 3) {
cmd_usage(cmdtp);
- return(1);
+ return 1;
}
dev = (int)simple_strtoul (argv[2], &ep, 16);
dev_desc = get_dev(argv[1],dev);
if (dev_desc == NULL) {
printf ("\n** Block device %s %d not supported\n", argv[1], dev);
- return(1);
+ return 1;
}
if (*ep) {
if (*ep != ':') {
puts ("\n** Invalid boot device, use `dev[:part]' **\n");
- return(1);
+ return 1;
}
part = (int)simple_strtoul(++ep, NULL, 16);
}
- if (argc == 4) {
- filename = argv[3];
- }
+ if (argc == 4)
+ filename = argv[3];
PRINTF("Using device %s %d:%d, directory: %s\n", argv[1], dev, part, filename);
if ((part_length = ext2fs_set_blk_dev(dev_desc, part)) == 0) {
printf ("** Bad partition - %s %d:%d **\n", argv[1], dev, part);
ext2fs_close();
- return(1);
+ return 1;
}
if (!ext2fs_mount(part_length)) {
printf ("** Bad ext2 partition or disk - %s %d:%d **\n", argv[1], dev, part);
ext2fs_close();
- return(1);
+ return 1;
}
if (ext2fs_ls (filename)) {
printf ("** Error ext2fs_ls() **\n");
ext2fs_close();
- return(1);
+ return 1;
};
ext2fs_close();
- return(0);
+ return 0;
}
U_BOOT_CMD(
switch (argc) {
case 3:
addr_str = getenv("loadaddr");
- if (addr_str != NULL) {
+ if (addr_str != NULL)
addr = simple_strtoul (addr_str, NULL, 16);
- } else {
+ else
addr = CONFIG_SYS_LOAD_ADDR;
- }
+
filename = getenv ("bootfile");
count = 0;
break;
default:
cmd_usage(cmdtp);
- return(1);
+ return 1;
}
if (!filename) {
- puts ("\n** No boot file defined **\n");
- return(1);
+ puts ("** No boot file defined **\n");
+ return 1;
}
dev = (int)simple_strtoul (argv[2], &ep, 16);
dev_desc = get_dev(argv[1],dev);
if (dev_desc==NULL) {
- printf ("\n** Block device %s %d not supported\n", argv[1], dev);
- return(1);
+ printf ("** Block device %s %d not supported\n", argv[1], dev);
+ return 1;
}
if (*ep) {
if (*ep != ':') {
- puts ("\n** Invalid boot device, use `dev[:part]' **\n");
- return(1);
+ puts ("** Invalid boot device, use `dev[:part]' **\n");
+ return 1;
}
part = (int)simple_strtoul(++ep, NULL, 16);
}
if (part != 0) {
if (get_partition_info (dev_desc, part, &info)) {
printf ("** Bad partition %d **\n", part);
- return(1);
+ return 1;
}
if (strncmp((char *)info.type, BOOT_PART_TYPE, sizeof(info.type)) != 0) {
- printf ("\n** Invalid partition type \"%.32s\""
+ printf ("** Invalid partition type \"%.32s\""
" (expect \"" BOOT_PART_TYPE "\")\n",
info.type);
- return(1);
+ return 1;
}
- PRINTF ("\nLoading from block device %s device %d, partition %d: "
- "Name: %.32s Type: %.32s File:%s\n",
- argv[1], dev, part, info.name, info.type, filename);
+ printf ("Loading file \"%s\" "
+ "from %s device %d:%d (%.32s)\n",
+ filename,
+ argv[1], dev, part, info.name);
} else {
- PRINTF ("\nLoading from block device %s device %d, File:%s\n",
- argv[1], dev, filename);
+ printf ("Loading file \"%s\" from %s device %d\n",
+ filename, argv[1], dev);
}
if ((part_length = ext2fs_set_blk_dev(dev_desc, part)) == 0) {
printf ("** Bad partition - %s %d:%d **\n", argv[1], dev, part);
ext2fs_close();
- return(1);
+ return 1;
}
if (!ext2fs_mount(part_length)) {
- printf ("** Bad ext2 partition or disk - %s %d:%d **\n", argv[1], dev, part);
+ printf ("** Bad ext2 partition or disk - %s %d:%d **\n",
+ argv[1], dev, part);
ext2fs_close();
- return(1);
+ return 1;
}
filelen = ext2fs_open(filename);
if (filelen < 0) {
printf("** File not found %s\n", filename);
ext2fs_close();
- return(1);
+ return 1;
}
if ((count < filelen) && (count != 0)) {
filelen = count;
}
if (ext2fs_read((char *)addr, filelen) != filelen) {
- printf("\n** Unable to read \"%s\" from %s %d:%d **\n", filename, argv[1], dev, part);
+ printf("** Unable to read \"%s\" from %s %d:%d **\n",
+ filename, argv[1], dev, part);
ext2fs_close();
- return(1);
+ return 1;
}
ext2fs_close();
/* Loading ok, update default load address */
load_addr = addr;
- printf ("\n%d bytes read\n", filelen);
+ printf ("%d bytes read\n", filelen);
sprintf(buf, "%X", filelen);
setenv("filesize", buf);
- return(filelen);
+ return 0;
}
U_BOOT_CMD(
uint32_t inode_table_id;
uint16_t free_blocks;
uint16_t free_inodes;
- uint16_t pad;
+ uint16_t used_dir_cnt;
uint32_t reserved[3];
};
static int ext2fs_blockgroup
(struct ext2_data *data, int group, struct ext2_block_group *blkgrp) {
+ unsigned int blkno;
+ unsigned int blkoff;
+ unsigned int desc_per_blk;
+
+ desc_per_blk = EXT2_BLOCK_SIZE(data) / sizeof(struct ext2_block_group);
+
+ blkno = __le32_to_cpu(data->sblock.first_data_block) + 1 +
+ group / desc_per_blk;
+ blkoff = (group % desc_per_blk) * sizeof(struct ext2_block_group);
#ifdef DEBUG
- printf ("ext2fs read blockgroup\n");
+ printf ("ext2fs read %d group descriptor (blkno %d blkoff %d)\n",
+ group, blkno, blkoff);
#endif
- return (ext2fs_devread
- (((__le32_to_cpu (data->sblock.first_data_block) +
- 1) << LOG2_EXT2_BLOCK_SIZE (data)),
- group * sizeof (struct ext2_block_group),
- sizeof (struct ext2_block_group), (char *) blkgrp));
+ return (ext2fs_devread (blkno << LOG2_EXT2_BLOCK_SIZE(data),
+ blkoff, sizeof(struct ext2_block_group), (char *)blkgrp));
+
}
unsigned int blkno;
unsigned int blkoff;
- /* It is easier to calculate if the first inode is 0. */
- ino--;
#ifdef DEBUG
printf ("ext2fs read inode %d\n", ino);
#endif
- status = ext2fs_blockgroup (data,
- ino /
- __le32_to_cpu (sblock->inodes_per_group),
- &blkgrp);
+ /* It is easier to calculate if the first inode is 0. */
+ ino--;
+ status = ext2fs_blockgroup (data, ino / __le32_to_cpu
+ (sblock->inodes_per_group), &blkgrp);
if (status == 0) {
return (0);
}
- inodes_per_block = EXT2_BLOCK_SIZE (data) / 128;
- blkno = (ino % __le32_to_cpu (sblock->inodes_per_group)) /
- inodes_per_block;
- blkoff = (ino % __le32_to_cpu (sblock->inodes_per_group)) %
- inodes_per_block;
+
+ inodes_per_block = EXT2_BLOCK_SIZE(data) / __le16_to_cpu(sblock->inode_size);
+
+#ifdef DEBUG
+ printf ("ext2fs read inode blkno %d blkoff %d\n", blkno, blkoff);
+#endif
+
+ blkno = __le32_to_cpu (blkgrp.inode_table_id) +
+ (ino % __le32_to_cpu (sblock->inodes_per_group))
+ / inodes_per_block;
+ blkoff = (ino % inodes_per_block) * __le16_to_cpu (sblock->inode_size);
#ifdef DEBUG
printf ("ext2fs read inode blkno %d blkoff %d\n", blkno, blkoff);
#endif
/* Read the inode. */
- status = ext2fs_devread (((__le32_to_cpu (blkgrp.inode_table_id) +
- blkno) << LOG2_EXT2_BLOCK_SIZE (data)),
- sizeof (struct ext2_inode) * blkoff,
+ status = ext2fs_devread (blkno << LOG2_EXT2_BLOCK_SIZE (data), blkoff,
sizeof (struct ext2_inode), (char *) inode);
if (status == 0) {
return (0);
}
+
return (1);
}
#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
#define CONFIG_FPS850L 1 /* ...on a FingerPrint Sensor */
-#undef CONFIG_8xx_CONS_SMC1
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_MPC860 1 /* This is a MPC860 CPU */
#define CONFIG_FPS860L 1 /* ...on a FingerPrint Sensor */
-#undef CONFIG_8xx_CONS_SMC1
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200
#define CONFIG_BOOTCOUNT_LIMIT
#endif
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_PS2KBD /* AT-PS/2 Keyboard */
#define CONFIG_NSCU 1
#define CONFIG_8xx_CONS_SCC1 1 /* Console is on SMC1 */
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_66MHz 1 /* running at 66 MHz, 1:1 clock */
#define CONFIG_MPC850 1 /* This is a MPC850 CPU */
#define CONFIG_SM850 1 /*...on a MPC850 Service Module */
-#undef CONFIG_8xx_CONS_SMC1 /* SMC1 not usable because Ethernet on SCC3 */
#define CONFIG_8xx_CONS_SMC2 1 /* Console is on SMC2 */
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200
-#if 0
-#define CONFIG_BOOTDELAY -1 /* autoboot disabled */
-#else
#define CONFIG_BOOTDELAY 5 /* autoboot after 5 seconds */
-#endif
#define CONFIG_CLOCKS_IN_MHZ 1 /* clocks passsed to Linux in MHz */
/* 'cpuclk' variable with valid value) */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#endif
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#endif
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_TQM850L 1 /* ...on a TQM8xxL module */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_TQM850M 1 /* ...on a TQM8xxM module */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_TQM855L 1 /* ...on a TQM8xxL module */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_TQM855M 1 /* ...on a TQM8xxM module */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_TQM860L 1 /* ...on a TQM8xxL module */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_TQM860M 1 /* ...on a TQM8xxM module */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_TQM862L 1 /* ...on a TQM8xxL module */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_TQM862M 1 /* ...on a TQM8xxM module */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
-
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#endif
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
/* 'cpuclk' variable with valid value) */
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT
#define CONFIG_TQM8xxL 1
#define CONFIG_8xx_CONS_SMC1 1 /* Console is on SMC1 */
-#undef CONFIG_8xx_CONS_SMC2
-#undef CONFIG_8xx_CONS_NONE
+#define CONFIG_SYS_SMC_RXBUFLEN 128
+#define CONFIG_SYS_MAXIDLE 10
#define CONFIG_BAUDRATE 115200 /* console baudrate = 115kbps */
#define CONFIG_BOOTCOUNT_LIMIT