configs: tizen_starfive_visionfive2: Update config file 52/300152/3
authorJaehoon Chung <jh80.chung@samsung.com>
Tue, 17 Oct 2023 10:12:54 +0000 (19:12 +0900)
committerJaehoon Chung <jh80.chung@samsung.com>
Fri, 20 Oct 2023 04:39:04 +0000 (13:39 +0900)
Update config file according to update the version.

Change-Id: Ib5c55110cd8db1f0f7eb71cca0d24d37830dffe5
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
configs/tizen_starfive_visionfive2_defconfig

index 282b7eb..6f37e86 100644 (file)
@@ -3,12 +3,17 @@ CONFIG_SYS_MALLOC_LEN=0x800000
 CONFIG_SYS_MALLOC_F_LEN=0x10000
 CONFIG_SPL_GPIO=y
 CONFIG_NR_DRAM_BANKS=1
+CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
+CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000000
+CONFIG_SF_DEFAULT_SPEED=100000000
 CONFIG_ENV_SIZE=0x4000
 CONFIG_SPL_DM_SPI=y
-CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2-v1.3b"
+CONFIG_DEFAULT_DEVICE_TREE="jh7110-starfive-visionfive-2"
 CONFIG_SPL_TEXT_BASE=0x8000000
-CONFIG_SYS_PROMPT="VisionFive2> "
+CONFIG_OF_LIBFDT_OVERLAY=y
+CONFIG_DM_RESET=y
 CONFIG_SPL_MMC=y
+CONFIG_SPL_STACK=0x8180000
 CONFIG_SPL=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI=y
@@ -18,10 +23,10 @@ CONFIG_SPL_OPENSBI_LOAD_ADDR=0x40000000
 CONFIG_ARCH_RV64I=y
 CONFIG_CMODEL_MEDANY=y
 CONFIG_RISCV_SMODE=y
-CONFIG_DISTRO_DEFAULTS=y
-CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y
-CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x80000000
+# CONFIG_OF_BOARD_FIXUP is not set
 CONFIG_FIT=y
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_DISTRO_DEFAULTS=y
 CONFIG_QSPI_BOOT=y
 CONFIG_SD_BOOT=y
 CONFIG_USE_BOOTARGS=y
@@ -29,34 +34,39 @@ CONFIG_BOOTARGS="console=ttyS0,115200 debug rootwait earlycon=sbi"
 CONFIG_BOOTCOMMAND="load ${bootdevtype} ${bootdevnum}:${bootpart} ${scriptaddr} ${prefix}${script}; devtype=${bootdevtype}; devnum=${bootdevnum}; distro_bootpart=${bootpart}; source ${scriptaddr}"
 CONFIG_USE_PREBOOT=y
 CONFIG_PREBOOT="setenv fdt_addr ${fdtcontroladdr}; fdt addr ${fdtcontroladdr}; test -n \"${loadbootenv}\" -a -n \"${importbootenv}\" && run loadbootenv && run importbootenv;"
-CONFIG_DEFAULT_FDT_FILE="jh7110-starfive-visionfive-2-v1.3b.dtb"
+CONFIG_DEFAULT_FDT_FILE="jh7110-starfive-visionfive-2.dtb"
 CONFIG_DISPLAY_CPUINFO=y
 CONFIG_DISPLAY_BOARDINFO=y
-CONFIG_EVENT=y
-CONFIG_EVENT_DYNAMIC=y
 CONFIG_ID_EEPROM=y
+CONFIG_SYS_EEPROM_BUS_NUM=5
 CONFIG_SPL_MAX_SIZE=0x40000
 CONFIG_SPL_PAD_TO=0x0
 CONFIG_SPL_BSS_START_ADDR=0x8040000
 CONFIG_SPL_BSS_MAX_SIZE=0x10000
 # CONFIG_SPL_SHARES_INIT_SP_ADDR is not set
-CONFIG_SPL_STACK=0x8180000
 CONFIG_SYS_SPL_MALLOC=y
 CONFIG_HAS_CUSTOM_SPL_MALLOC_START=y
 CONFIG_CUSTOM_SYS_SPL_MALLOC_ADDR=0x80000000
 CONFIG_SYS_SPL_MALLOC_SIZE=0x400000
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_USE_PARTITION=y
 CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION=0x2
+CONFIG_SPL_I2C=y
 CONFIG_SPL_DM_SPI_FLASH=y
 CONFIG_SPL_DM_RESET=y
 CONFIG_SPL_SPI_LOAD=y
+CONFIG_SYS_PROMPT="VisionFive2> "
 CONFIG_SYS_CBSIZE=256
 CONFIG_SYS_PBSIZE=276
 CONFIG_CMD_SBI=y
 CONFIG_SYS_BOOTM_LEN=0x4000000
+CONFIG_CMD_EEPROM=y
+CONFIG_SYS_EEPROM_SIZE=512
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=4
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_MEMINFO=y
 CONFIG_CMD_I2C=y
 CONFIG_CMD_TFTPPUT=y
+CONFIG_OF_BOARD=y
 CONFIG_ENV_IS_IN_FAT=y
 CONFIG_ENV_FAT_DEVICE_AND_PART="1:3"
 CONFIG_SYS_RELOC_GD_ENV_ADDR=y
@@ -65,16 +75,15 @@ CONFIG_SPL_CLK_COMPOSITE_CCF=y
 CONFIG_CLK_COMPOSITE_CCF=y
 CONFIG_SPL_CLK_JH7110=y
 CONFIG_DM_I2C=y
-# CONFIG_SPL_DM_I2C is not set
 CONFIG_SYS_I2C_DW=y
 CONFIG_MISC=y
 CONFIG_I2C_EEPROM=y
+CONFIG_SPL_I2C_EEPROM=y
 CONFIG_SYS_I2C_EEPROM_ADDR=0X50
 CONFIG_MMC_HS400_SUPPORT=y
 CONFIG_SPL_MMC_HS400_SUPPORT=y
 CONFIG_MMC_DW=y
 CONFIG_MMC_DW_SNPS=y
-CONFIG_SF_DEFAULT_SPEED=100000000
 CONFIG_SPI_FLASH_EON=y
 CONFIG_SPI_FLASH_GIGADEVICE=y
 CONFIG_SPI_FLASH_ISSI=y
@@ -87,10 +96,8 @@ CONFIG_SPL_PINCTRL_STARFIVE=y
 CONFIG_SPL_PINCTRL_STARFIVE_JH7110=y
 CONFIG_PINCTRL_STARFIVE=y
 # CONFIG_RAM_SIFIVE is not set
-CONFIG_DM_RESET=y
 CONFIG_SYS_NS16550=y
 CONFIG_CADENCE_QSPI=y
 CONFIG_SYSRESET=y
 CONFIG_TIMER_EARLY=y
-CONFIG_OF_LIBFDT_OVERLAY=y
 # CONFIG_EFI_LOADER is not set