Prepare v2023.10

[platform/kernel/u-boot.git] / include / configs / h2200.h

diff --git a/include/configs/h2200.h b/include/configs/h2200.h
deleted file mode 100644 (file)
index 69100d3..0000000
--- a/include/configs/h2200.h
+++ /dev/null
@@ -1,129 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0+ */
-/*
- * iPAQ h2200 board configuration
- *
- * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define CONFIG_MACH_TYPE               MACH_TYPE_H2200
-
-#define CONFIG_CPU_PXA25X              1
-
-#define CONFIG_NR_DRAM_BANKS           1
-#define PHYS_SDRAM_1                   0xa0000000 /* SDRAM Bank #1 */
-#define PHYS_SDRAM_1_SIZE              0x04000000 /* 64 MB */
-
-#define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM_1
-#define CONFIG_SYS_SDRAM_SIZE          PHYS_SDRAM_1_SIZE
-
-#define CONFIG_SYS_INIT_SP_ADDR                0xfffff800
-
-#define CONFIG_ENV_SIZE                        0x00040000
-#define CONFIG_SYS_MALLOC_LEN          (CONFIG_ENV_SIZE + 128*1024)
-
-#define CONFIG_SYS_LOAD_ADDR           0xa3000000 /* default load address */
-
-/*
- * iPAQ 1st stage bootloader loads 2nd stage bootloader
- * at address 0xa0040000 but bootloader requires header
- * which is 0x1000 long.
- *
- * --- Header begin ---
- *     .word 0xea0003fe ; b 0x1000
- *
- *     .org 0x40
- *     .ascii "ECEC"
- *
- *     .org 0x1000
- * --- Header end ---
- */
-
-/*
- * Static chips
- */
-
-#define CONFIG_SYS_MSC0_VAL            0x246c7ffc
-#define CONFIG_SYS_MSC1_VAL            0x7ff07ff0
-#define CONFIG_SYS_MSC2_VAL            0x7ff07ff0
-
-/*
- * PCMCIA and CF Interfaces
- */
-
-#define CONFIG_SYS_MECR_VAL            0x00000000
-#define CONFIG_SYS_MCMEM0_VAL          0x00000000
-#define CONFIG_SYS_MCMEM1_VAL          0x00000000
-#define CONFIG_SYS_MCATT0_VAL          0x00000000
-#define CONFIG_SYS_MCATT1_VAL          0x00000000
-#define CONFIG_SYS_MCIO0_VAL           0x00000000
-#define CONFIG_SYS_MCIO1_VAL           0x00000000
-
-#define CONFIG_SYS_FLYCNFG_VAL         0x00000000
-#define CONFIG_SYS_SXCNFG_VAL          0x00040004
-
-#define CONFIG_SYS_MDREFR_VAL          0x0099E018
-#define CONFIG_SYS_MDCNFG_VAL          0x01C801CB
-#define CONFIG_SYS_MDMRS_VAL           0x00220022
-
-#define CONFIG_SYS_PSSR_VAL            0x00000000
-#define CONFIG_SYS_CKEN                        0x00004840
-#define CONFIG_SYS_CCCR                        0x00000161
-
-/*
- * GPIOs
- */
-
-#define CONFIG_SYS_GPSR0_VAL           0x01000000
-#define CONFIG_SYS_GPSR1_VAL           0x00000000
-#define CONFIG_SYS_GPSR2_VAL           0x00010000
-
-#define CONFIG_SYS_GPCR0_VAL           0x00000000
-#define CONFIG_SYS_GPCR1_VAL           0x00000000
-#define CONFIG_SYS_GPCR2_VAL           0x00000000
-
-#define CONFIG_SYS_GPDR0_VAL           0xF7E38C00
-#define CONFIG_SYS_GPDR1_VAL           0xBCFFBF83
-#define CONFIG_SYS_GPDR2_VAL           0x000157FF
-
-#define CONFIG_SYS_GAFR0_L_VAL         0x80401000
-#define CONFIG_SYS_GAFR0_U_VAL         0x00000112
-#define CONFIG_SYS_GAFR1_L_VAL         0x600A9550
-#define CONFIG_SYS_GAFR1_U_VAL         0x0005AAAA
-#define CONFIG_SYS_GAFR2_L_VAL         0x20000000
-#define CONFIG_SYS_GAFR2_U_VAL         0x00000000
-
-/*
- * Serial port
- */
-#define CONFIG_FFUART
-
-#define CONFIG_SYS_BAUDRATE_TABLE      { 9600, 38400, 115200 }
-
-#define CONFIG_SETUP_MEMORY_TAGS
-#define CONFIG_CMDLINE_TAG
-#define CONFIG_INITRD_TAG
-
-/* Monitor Command Prompt */
-
-#define CONFIG_USB_DEV_PULLUP_GPIO     33
-/* USB VBUS GPIO 3 */
-
-#define CONFIG_BOOTCOMMAND             \
-       "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
-       "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
-       "source :script ; " \
-       "bootm ; "
-
-#define CONFIG_USB_GADGET_PXA2XX
-#define CONFIG_USB_ETH_SUBSET
-
-#define CONFIG_USBNET_DEV_ADDR         "de:ad:be:ef:00:01"
-#define CONFIG_EXTRA_ENV_SETTINGS \
-       "stdin=serial\0" \
-       "stdout=serial\0" \
-       "stderr=serial\0"
-
-#endif /* __CONFIG_H */