include/configs/h2200.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * iPAQ h2200 board configuration
   4  *
   5  * Copyright (C) 2012 Lukasz Dalek <luk0104@gmail.com>
   6  */
   7
   8 #ifndef __CONFIG_H
   9 #define __CONFIG_H
  10
  11 #define CONFIG_MACH_TYPE                MACH_TYPE_H2200
  12
  13 #define CONFIG_CPU_PXA25X               1
  14
  15 #define CONFIG_NR_DRAM_BANKS            1
  16 #define PHYS_SDRAM_1                    0xa0000000 /* SDRAM Bank #1 */
  17 #define PHYS_SDRAM_1_SIZE               0x04000000 /* 64 MB */
  18
  19 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  20 #define CONFIG_SYS_SDRAM_SIZE           PHYS_SDRAM_1_SIZE
  21
  22 #define CONFIG_SYS_INIT_SP_ADDR         0xfffff800
  23
  24 #define CONFIG_ENV_SIZE                 0x00040000
  25 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 128*1024)
  26
  27 #define CONFIG_SYS_LOAD_ADDR            0xa3000000 /* default load address */
  28
  29 /*
  30  * iPAQ 1st stage bootloader loads 2nd stage bootloader
  31  * at address 0xa0040000 but bootloader requires header
  32  * which is 0x1000 long.
  33  *
  34  * --- Header begin ---
  35  *      .word 0xea0003fe ; b 0x1000
  36  *
  37  *      .org 0x40
  38  *      .ascii "ECEC"
  39  *
  40  *      .org 0x1000
  41  * --- Header end ---
  42  */
  43
  44 /*
  45  * Static chips
  46  */
  47
  48 #define CONFIG_SYS_MSC0_VAL             0x246c7ffc
  49 #define CONFIG_SYS_MSC1_VAL             0x7ff07ff0
  50 #define CONFIG_SYS_MSC2_VAL             0x7ff07ff0
  51
  52 /*
  53  * PCMCIA and CF Interfaces
  54  */
  55
  56 #define CONFIG_SYS_MECR_VAL             0x00000000
  57 #define CONFIG_SYS_MCMEM0_VAL           0x00000000
  58 #define CONFIG_SYS_MCMEM1_VAL           0x00000000
  59 #define CONFIG_SYS_MCATT0_VAL           0x00000000
  60 #define CONFIG_SYS_MCATT1_VAL           0x00000000
  61 #define CONFIG_SYS_MCIO0_VAL            0x00000000
  62 #define CONFIG_SYS_MCIO1_VAL            0x00000000
  63
  64 #define CONFIG_SYS_FLYCNFG_VAL          0x00000000
  65 #define CONFIG_SYS_SXCNFG_VAL           0x00040004
  66
  67 #define CONFIG_SYS_MDREFR_VAL           0x0099E018
  68 #define CONFIG_SYS_MDCNFG_VAL           0x01C801CB
  69 #define CONFIG_SYS_MDMRS_VAL            0x00220022
  70
  71 #define CONFIG_SYS_PSSR_VAL             0x00000000
  72 #define CONFIG_SYS_CKEN                 0x00004840
  73 #define CONFIG_SYS_CCCR                 0x00000161
  74
  75 /*
  76  * GPIOs
  77  */
  78
  79 #define CONFIG_SYS_GPSR0_VAL            0x01000000
  80 #define CONFIG_SYS_GPSR1_VAL            0x00000000
  81 #define CONFIG_SYS_GPSR2_VAL            0x00010000
  82
  83 #define CONFIG_SYS_GPCR0_VAL            0x00000000
  84 #define CONFIG_SYS_GPCR1_VAL            0x00000000
  85 #define CONFIG_SYS_GPCR2_VAL            0x00000000
  86
  87 #define CONFIG_SYS_GPDR0_VAL            0xF7E38C00
  88 #define CONFIG_SYS_GPDR1_VAL            0xBCFFBF83
  89 #define CONFIG_SYS_GPDR2_VAL            0x000157FF
  90
  91 #define CONFIG_SYS_GAFR0_L_VAL          0x80401000
  92 #define CONFIG_SYS_GAFR0_U_VAL          0x00000112
  93 #define CONFIG_SYS_GAFR1_L_VAL          0x600A9550
  94 #define CONFIG_SYS_GAFR1_U_VAL          0x0005AAAA
  95 #define CONFIG_SYS_GAFR2_L_VAL          0x20000000
  96 #define CONFIG_SYS_GAFR2_U_VAL          0x00000000
  97
  98 /*
  99  * Serial port
 100  */
 101 #define CONFIG_FFUART
 102
 103 #define CONFIG_SYS_BAUDRATE_TABLE       { 9600, 38400, 115200 }
 104
 105 #define CONFIG_SETUP_MEMORY_TAGS
 106 #define CONFIG_CMDLINE_TAG
 107 #define CONFIG_INITRD_TAG
 108
 109 /* Monitor Command Prompt */
 110
 111 #define CONFIG_USB_DEV_PULLUP_GPIO      33
 112 /* USB VBUS GPIO 3 */
 113
 114 #define CONFIG_BOOTCOMMAND              \
 115         "setenv downloaded 0 ; while test $downloaded -eq 0 ; do " \
 116         "if bootp ; then setenv downloaded 1 ; fi ; done ; " \
 117         "source :script ; " \
 118         "bootm ; "
 119
 120 #define CONFIG_USB_GADGET_PXA2XX
 121 #define CONFIG_USB_ETH_SUBSET
 122
 123 #define CONFIG_USBNET_DEV_ADDR          "de:ad:be:ef:00:01"
 124 #define CONFIG_EXTRA_ENV_SETTINGS \
 125         "stdin=serial\0" \
 126         "stdout=serial\0" \
 127         "stderr=serial\0"
 128
 129 #endif /* __CONFIG_H */