board configs: drop NET_MULTI references

[platform/kernel/u-boot.git] / include / configs / SIMPC8313.h

diff --git a/include/configs/SIMPC8313.h b/include/configs/SIMPC8313.h
index 70b7489..e006b55 100644 (file)
--- a/include/configs/SIMPC8313.h
+++ b/include/configs/SIMPC8313.h
@@ -36,6 +36,21 @@
 #define CONFIG_MPC831x                 1
 #define CONFIG_MPC8313                 1
 
+#define CONFIG_SYS_NAND_U_BOOT_SIZE    (512 << 10)
+#define CONFIG_SYS_NAND_U_BOOT_DST     0x00100000
+#define CONFIG_SYS_NAND_U_BOOT_START   0x00100100
+#define CONFIG_SYS_NAND_U_BOOT_RELOC   0x00010000
+#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
+
+#define CONFIG_SYS_TEXT_BASE   0x00100000 /* CONFIG_SYS_NAND_U_BOOT_DST */
+#define CONFIG_SYS_TEXT_BASE_SPL 0xfff00000
+
+#ifdef CONFIG_NAND_SPL
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE_SPL /* start of monitor */
+#else
+#define CONFIG_SYS_MONITOR_BASE        CONFIG_SYS_TEXT_BASE    /* start of monitor */
+#endif
+
 #define CONFIG_PCI
 #define CONFIG_FSL_ELBC                        1
 
@@ -91,18 +106,15 @@
  */
 #define CONFIG_SYS_NO_FLASH
 
-#define CONFIG_SYS_MONITOR_BASE        TEXT_BASE       /* start of monitor */
-
 #if !defined(CONFIG_NAND_SPL)
 #define CONFIG_SYS_RAMBOOT
 #endif
 
 #define CONFIG_SYS_INIT_RAM_LOCK       1
 #define CONFIG_SYS_INIT_RAM_ADDR       0xFD000000      /* Initial RAM address */
-#define CONFIG_SYS_INIT_RAM_END                0x1000          /* End of used area in RAM*/
+#define CONFIG_SYS_INIT_RAM_SIZE               0x1000          /* Size of used area in RAM*/
 
-#define CONFIG_SYS_GBL_DATA_SIZE       0x100           /* num bytes initial data */
-#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_END - CONFIG_SYS_GBL_DATA_SIZE)
+#define CONFIG_SYS_GBL_DATA_OFFSET     (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 #define CONFIG_SYS_INIT_SP_OFFSET      CONFIG_SYS_GBL_DATA_OFFSET
 
 /* CONFIG_SYS_MONITOR_LEN must be a multiple of CONFIG_ENV_SECT_SIZE */
@@ -135,12 +147,6 @@
 #define CONFIG_CMD_NAND                1
 #define CONFIG_NAND_FSL_ELBC           1
 
-#define CONFIG_SYS_NAND_U_BOOT_SIZE    (512 << 10)
-#define CONFIG_SYS_NAND_U_BOOT_DST     0x00100000
-#define CONFIG_SYS_NAND_U_BOOT_START   0x00100100
-#define CONFIG_SYS_NAND_U_BOOT_RELOC   0x00010000
-#define CONFIG_SYS_NAND_U_BOOT_RELOC_SP (CONFIG_SYS_NAND_U_BOOT_RELOC + 0x10000)
-
 #define CONFIG_SYS_NAND_BR_PRELIM      ( CONFIG_SYS_NAND_BASE \
                                        | (2<<BR_DECC_SHIFT)    /* Use HW ECC */ \
                                        | BR_PS_8               /* Port Size = 8 bit */ \
@@ -266,7 +272,6 @@
  */
 #define CONFIG_TSEC_ENET               /* TSEC ethernet support */
 
-#define CONFIG_NET_MULTI
 #define CONFIG_GMII                    /* MII PHY management */
 
 #ifdef CONFIG_TSEC1
@@ -373,10 +378,10 @@
 
 /*
  * For booting Linux, the board info and command line data
- * have to be in the first 8 MB of memory, since this is
+ * have to be in the first 256 MB of memory, since this is
  * the maximum mapped by the Linux kernel during initialization.
  */
-#define CONFIG_SYS_BOOTMAPSZ           (8 << 20)       /* Initial Memory map for Linux*/
+#define CONFIG_SYS_BOOTMAPSZ           (256 << 20)     /* Initial Memory map for Linux*/
 
 #define CONFIG_SYS_RCWH_PCIHOST                0x80000000      /* PCIHOST */
 
@@ -477,14 +482,6 @@
 #define CONFIG_SYS_DBAT7U      CONFIG_SYS_IBAT7U
 
 /*
- * Internal Definitions
- *
- * Boot Flags
- */
-#define BOOTFLAG_COLD  0x01    /* Normal Power-On: Boot from FLASH */
-#define BOOTFLAG_WARM  0x02    /* Software reboot */
-
-/*
  * Environment Configuration
  */
 #define CONFIG_ENV_OVERWRITE
@@ -511,11 +508,11 @@
        "ethprime=TSEC1\0"                                              \
        "uboot=" MK_STR(CONFIG_UBOOTPATH) "\0"                          \
        "tftpflash=tftpboot $loadaddr $uboot; "                         \
-               "protect off " MK_STR(TEXT_BASE) " +$filesize; "        \
-               "erase " MK_STR(TEXT_BASE) " +$filesize; "              \
-               "cp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize; "      \
-               "protect on " MK_STR(TEXT_BASE) " +$filesize; "         \
-               "cmp.b $loadaddr " MK_STR(TEXT_BASE) " $filesize\0"     \
+               "protect off " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "     \
+               "erase " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "           \
+               "cp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize; "   \
+               "protect on " MK_STR(CONFIG_SYS_TEXT_BASE) " +$filesize; "              \
+               "cmp.b $loadaddr " MK_STR(CONFIG_SYS_TEXT_BASE) " $filesize\0"  \
        "fdtaddr=ae0000\0"                                              \
        "fdtfile=" MK_STR(CONFIG_FDTFILE) "\0"                          \
        "console=ttyS0\0"                                               \