mpc83xx: Kconfig: Migrate HRCW to Kconfig

[platform/kernel/u-boot.git] / include / configs / MPC832XEMDS.h

diff --git a/include/configs/MPC832XEMDS.h b/include/configs/MPC832XEMDS.h
index 716fc38..dad8407 100644 (file)
--- a/include/configs/MPC832XEMDS.h
+++ b/include/configs/MPC832XEMDS.h
@@ -1,7 +1,6 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
 /*
  * Copyright (C) 2006 Freescale Semiconductor, Inc.
- *
- * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef __CONFIG_H
@@ -12,68 +11,12 @@
  */
 #define CONFIG_E300            1       /* E300 family */
 #define CONFIG_QE              1       /* Has QE */
-#define CONFIG_MPC832x         1       /* MPC832x CPU specific */
-#define CONFIG_MPC832XEMDS     1       /* MPC832XEMDS board specific */
-
-#define        CONFIG_SYS_TEXT_BASE    0xFE000000
-
-/*
- * System Clock Setup
- */
-#ifdef CONFIG_PCISLAVE
-#define CONFIG_83XX_PCICLK     66000000        /* in HZ */
-#else
-#define CONFIG_83XX_CLKIN      66000000        /* in Hz */
-#endif
-
-#ifndef CONFIG_SYS_CLK_FREQ
-#define CONFIG_SYS_CLK_FREQ    66000000
-#endif
-
-/*
- * Hardware Reset Configuration Word
- */
-#define CONFIG_SYS_HRCW_LOW (\
-       HRCWL_LCL_BUS_TO_SCB_CLK_1X1 |\
-       HRCWL_DDR_TO_SCB_CLK_2X1 |\
-       HRCWL_VCO_1X2 |\
-       HRCWL_CSB_TO_CLKIN_2X1 |\
-       HRCWL_CORE_TO_CSB_2X1 |\
-       HRCWL_CE_PLL_VCO_DIV_2 |\
-       HRCWL_CE_PLL_DIV_1X1 |\
-       HRCWL_CE_TO_PLL_1X3)
-
-#ifdef CONFIG_PCISLAVE
-#define CONFIG_SYS_HRCW_HIGH (\
-       HRCWH_PCI_AGENT |\
-       HRCWH_PCI1_ARBITER_DISABLE |\
-       HRCWH_CORE_ENABLE |\
-       HRCWH_FROM_0XFFF00100 |\
-       HRCWH_BOOTSEQ_DISABLE |\
-       HRCWH_SW_WATCHDOG_DISABLE |\
-       HRCWH_ROM_LOC_LOCAL_16BIT |\
-       HRCWH_BIG_ENDIAN |\
-       HRCWH_LALE_NORMAL)
-#else
-#define CONFIG_SYS_HRCW_HIGH (\
-       HRCWH_PCI_HOST |\
-       HRCWH_PCI1_ARBITER_ENABLE |\
-       HRCWH_CORE_ENABLE |\
-       HRCWH_FROM_0X00000100 |\
-       HRCWH_BOOTSEQ_DISABLE |\
-       HRCWH_SW_WATCHDOG_DISABLE |\
-       HRCWH_ROM_LOC_LOCAL_16BIT |\
-       HRCWH_BIG_ENDIAN |\
-       HRCWH_LALE_NORMAL)
-#endif
 
 /*
  * System IO Config
  */
 #define CONFIG_SYS_SICRL               0x00000000
 
-#define CONFIG_BOARD_EARLY_INIT_R
-
 /*
  * IMMR new address
  */
@@ -187,11 +130,8 @@
 /*
  * FLASH on the Local Bus
  */
-#define CONFIG_SYS_FLASH_CFI           /* use the Common Flash Interface */
-#define CONFIG_FLASH_CFI_DRIVER                /* use the CFI driver */
 #define CONFIG_SYS_FLASH_BASE  0xFE000000      /* FLASH base address */
 #define CONFIG_SYS_FLASH_SIZE  16      /* FLASH size is 16M */
-#define CONFIG_SYS_FLASH_PROTECTION    1       /* Use h/w Flash protection. */
 
                                        /* Window base at flash base */
 #define CONFIG_SYS_LBLAWBAR0_PRELIM    CONFIG_SYS_FLASH_BASE
@@ -288,7 +228,6 @@
 /*
  * Serial Port
  */
-#define CONFIG_CONS_INDEX      1
 #define CONFIG_SYS_NS16550_SERIAL
 #define CONFIG_SYS_NS16550_REG_SIZE    1
 #define CONFIG_SYS_NS16550_CLK         get_bus_freq(0)
@@ -299,9 +238,6 @@
 #define CONFIG_SYS_NS16550_COM1        (CONFIG_SYS_IMMR+0x4500)
 #define CONFIG_SYS_NS16550_COM2        (CONFIG_SYS_IMMR+0x4600)
 
-#define CONFIG_CMDLINE_EDITING 1       /* add command line history     */
-#define CONFIG_AUTO_COMPLETE           /* add autocompletion support   */
-
 /* I2C */
 #define CONFIG_SYS_I2C
 #define CONFIG_SYS_I2C_FSL
@@ -379,13 +315,11 @@
  * Environment
  */
 #ifndef CONFIG_SYS_RAMBOOT
-       #define CONFIG_ENV_IS_IN_FLASH  1
        #define CONFIG_ENV_ADDR         \
                        (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
        #define CONFIG_ENV_SECT_SIZE    0x20000
        #define CONFIG_ENV_SIZE         0x2000
 #else
-       #define CONFIG_ENV_IS_NOWHERE   1       /* Store ENV in memory only */
        #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE - 0x1000)
        #define CONFIG_ENV_SIZE         0x2000
 #endif
@@ -397,38 +331,18 @@
  * BOOTP options
  */
 #define CONFIG_BOOTP_BOOTFILESIZE
-#define CONFIG_BOOTP_BOOTPATH
-#define CONFIG_BOOTP_GATEWAY
-#define CONFIG_BOOTP_HOSTNAME
 
 /*
  * Command line configuration.
  */
 
-#if defined(CONFIG_PCI)
-    #define CONFIG_CMD_PCI
-#endif
-
 #undef CONFIG_WATCHDOG         /* watchdog disabled */
 
 /*
  * Miscellaneous configurable options
  */
-#define CONFIG_SYS_LONGHELP    /* undef to save memory */
 #define CONFIG_SYS_LOAD_ADDR   0x2000000       /* default load address */
 
-#if defined(CONFIG_CMD_KGDB)
-       #define CONFIG_SYS_CBSIZE       1024    /* Console I/O Buffer Size */
-#else
-       #define CONFIG_SYS_CBSIZE       256     /* Console I/O Buffer Size */
-#endif
-
-                               /* Print Buffer Size */
-#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16)
-#define CONFIG_SYS_MAXARGS     16      /* max number of command args */
-                               /* Boot Argument Buffer Size */
-#define CONFIG_SYS_BARGSIZE    CONFIG_SYS_CBSIZE
-
 /*
  * For booting Linux, the board info and command line data
  * have to be in the first 256 MB of memory, since this is
@@ -563,8 +477,6 @@
 
 #define CONFIG_LOADADDR        800000  /* default location for tftp and bootm */
 
-#undef  CONFIG_BOOTARGS                /* the boot command will set bootargs */
-
 #define CONFIG_EXTRA_ENV_SETTINGS                                      \
        "netdev=eth0\0"                                                 \
        "consoledev=ttyS0\0"                                            \