Convert CONFIG_CONS_INDEX et al to Kconfig

[platform/kernel/u-boot.git] / configs / P1010RDB-PA_NOR_defconfig

diff --git a/configs/P1010RDB-PA_NOR_defconfig b/configs/P1010RDB-PA_NOR_defconfig
index baa245a..8db09ba 100644 (file)
--- a/configs/P1010RDB-PA_NOR_defconfig
+++ b/configs/P1010RDB-PA_NOR_defconfig
@@ -1,5 +1,6 @@
 CONFIG_PPC=y
 CONFIG_SYS_TEXT_BASE=0xEFF40000
+CONFIG_SYS_MALLOC_LEN=0x100000
 CONFIG_ENV_SIZE=0x2000
 CONFIG_ENV_SECT_SIZE=0x20000
 CONFIG_DEFAULT_DEVICE_TREE="p1010rdb-pa"
@@ -11,11 +12,15 @@ CONFIG_FIT_VERBOSE=y
 CONFIG_OF_BOARD_SETUP=y
 CONFIG_OF_STDOUT_VIA_ALIAS=y
 CONFIG_BOOTDELAY=10
+CONFIG_USE_BOOTCOMMAND=y
+CONFIG_BOOTCOMMAND="setenv bootargs root=/dev/ram rw console=$consoledev,$baudrate $othbootargs ramdisk_size=$ramdisk_size;tftp $ramdiskaddr $ramdiskfile;tftp $loadaddr $bootfile;tftp $fdtaddr $fdtfile;bootm $loadaddr $ramdiskaddr $fdtaddr"
 CONFIG_SYS_CONSOLE_IS_IN_ENV=y
 CONFIG_BOARD_EARLY_INIT_F=y
 CONFIG_BOARD_EARLY_INIT_R=y
 CONFIG_HUSH_PARSER=y
 CONFIG_CMD_IMLS=y
+CONFIG_SYS_EEPROM_PAGE_WRITE_BITS=3
+CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS=5
 CONFIG_CMD_I2C=y
 CONFIG_CMD_MMC=y
 CONFIG_CMD_USB=y
@@ -31,7 +36,14 @@ CONFIG_ENV_IS_IN_FLASH=y
 CONFIG_ENV_ADDR=0xEFF20000
 CONFIG_DM=y
 CONFIG_FSL_CAAM=y
+CONFIG_DDR_CLK_FREQ=66666666
 CONFIG_DM_I2C=y
+CONFIG_SPL_SYS_I2C_LEGACY=y
+CONFIG_I2C_SET_DEFAULT_BUS_NUM=y
+CONFIG_SYS_I2C_FSL=y
+CONFIG_SYS_FSL_I2C_OFFSET=0x3000
+CONFIG_SYS_FSL_HAS_I2C2_OFFSET=y
+CONFIG_SYS_FSL_I2C2_OFFSET=0x3100
 CONFIG_FSL_ESDHC=y
 CONFIG_MTD=y
 CONFIG_MTD_NOR_FLASH=y
@@ -39,7 +51,6 @@ CONFIG_FLASH_CFI_DRIVER=y
 CONFIG_SYS_FLASH_USE_BUFFER_WRITE=y
 CONFIG_SYS_FLASH_CFI=y
 CONFIG_DM_SPI_FLASH=y
-CONFIG_SF_DEFAULT_MODE=0
 CONFIG_SF_DEFAULT_SPEED=10000000
 CONFIG_SPI_FLASH_SPANSION=y
 CONFIG_PHY_ATHEROS=y
@@ -64,3 +75,4 @@ CONFIG_SPI=y
 CONFIG_DM_SPI=y
 CONFIG_FSL_ESPI=y
 CONFIG_USB=y
+CONFIG_USB_EHCI_FSL=y