ad5e64fbb00827e721b1ea2765fb18cecea9bb35
[platform/kernel/u-boot.git] / post / cpu / ppc4xx / denali_ecc.c
1 /*
2  * (C) Copyright 2007
3  * Developed for DENX Software Engineering GmbH.
4  *
5  * Author: Pavel Kolesnikov <concord@emcraft.com>
6  *
7  * SPDX-License-Identifier:     GPL-2.0+
8  */
9
10 /* define DEBUG for debugging output (obviously ;-)) */
11 #if 0
12 #define DEBUG
13 #endif
14
15 #include <common.h>
16 #include <watchdog.h>
17
18 #if defined(CONFIG_440EPX) || defined(CONFIG_440GRX)
19
20 #include <post.h>
21
22 #if CONFIG_POST & CONFIG_SYS_POST_ECC
23
24 /*
25  * MEMORY ECC test
26  *
27  * This test performs the checks ECC facility of memory.
28  */
29 #include <asm/processor.h>
30 #include <asm/mmu.h>
31 #include <asm/io.h>
32 #include <asm/ppc440.h>
33
34 DECLARE_GLOBAL_DATA_PTR;
35
36 #if defined(DEBUG)
37 const static uint8_t syndrome_codes[] = {
38         0xF4, 0XF1, 0XEC, 0XEA, 0XE9, 0XE6, 0XE5, 0XE3,
39         0XDC, 0XDA, 0XD9, 0XD6, 0XD5, 0XD3, 0XCE, 0XCB,
40         0xB5, 0XB0, 0XAD, 0XAB, 0XA8, 0XA7, 0XA4, 0XA2,
41         0X9D, 0X9B, 0X98, 0X97, 0X94, 0X92, 0X8F, 0X8A,
42         0x75, 0x70, 0X6D, 0X6B, 0X68, 0X67, 0X64, 0X62,
43         0X5E, 0X5B, 0X58, 0X57, 0X54, 0X52, 0X4F, 0X4A,
44         0x34, 0x31, 0X2C, 0X2A, 0X29, 0X26, 0X25, 0X23,
45         0X1C, 0X1A, 0X19, 0X16, 0X15, 0X13, 0X0E, 0X0B,
46         0x80, 0x40, 0x20, 0x10, 0x08, 0x04, 0x02, 0x01
47 };
48 #endif
49
50 #define ECC_START_ADDR          0x10
51 #define ECC_STOP_ADDR           0x2000
52 #define ECC_PATTERN             0x01010101
53 #define ECC_PATTERN_CORR        0x11010101
54 #define ECC_PATTERN_UNCORR      0x61010101
55
56 inline static void disable_ecc(void)
57 {
58         uint32_t value;
59
60         sync(); /* Wait for any pending memory accesses to complete. */
61         mfsdram(DDR0_22, value);
62         mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
63                 | DDR0_22_CTRL_RAW_ECC_DISABLE);
64 }
65
66 inline static void clear_and_enable_ecc(void)
67 {
68         uint32_t value;
69
70         sync(); /* Wait for any pending memory accesses to complete. */
71         mfsdram(DDR0_00, value);
72         mtsdram(DDR0_00, value | DDR0_00_INT_ACK_ALL);
73         mfsdram(DDR0_22, value);
74         mtsdram(DDR0_22, (value & ~DDR0_22_CTRL_RAW_MASK)
75                 | DDR0_22_CTRL_RAW_ECC_ENABLE);
76 }
77
78 static uint32_t get_ecc_status(void)
79 {
80         uint32_t int_status;
81 #if defined(DEBUG)
82         uint8_t syndrome;
83         uint32_t hdata, ldata, haddr, laddr;
84         uint32_t value;
85 #endif
86
87         mfsdram(DDR0_00, int_status);
88         int_status &= DDR0_00_INT_STATUS_MASK;
89
90 #if defined(DEBUG)
91         if (int_status & (DDR0_00_INT_STATUS_BIT0 | DDR0_00_INT_STATUS_BIT1)) {
92                 mfsdram(DDR0_32, laddr);
93                 mfsdram(DDR0_33, haddr);
94                 haddr &= 0x00000001;
95                 if (int_status & DDR0_00_INT_STATUS_BIT1)
96                         debug("Multiple accesses");
97                 else
98                         debug("A single access");
99
100                 debug(" outside the defined physical memory space detected\n"
101                       "        addr = 0x%01x%08x\n", haddr, laddr);
102         }
103         if (int_status & (DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT3)) {
104                 unsigned int bit;
105
106                 mfsdram(DDR0_23, value);
107                 syndrome = (value >> 16) & 0xff;
108                 for (bit = 0; bit < sizeof(syndrome_codes); bit++)
109                         if (syndrome_codes[bit] == syndrome)
110                                 break;
111
112                 mfsdram(DDR0_38, laddr);
113                 mfsdram(DDR0_39, haddr);
114                 haddr &= 0x00000001;
115                 mfsdram(DDR0_40, ldata);
116                 mfsdram(DDR0_41, hdata);
117                 if (int_status & DDR0_00_INT_STATUS_BIT3)
118                         debug("Multiple correctable ECC events");
119                 else
120                         debug("Single correctable ECC event");
121
122                 debug(" detected\n        0x%01x%08x - 0x%08x%08x, bit - %d\n",
123                       haddr, laddr, hdata, ldata, bit);
124         }
125         if (int_status & (DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT5)) {
126                 mfsdram(DDR0_23, value);
127                 syndrome = (value >> 8) & 0xff;
128                 mfsdram(DDR0_34, laddr);
129                 mfsdram(DDR0_35, haddr);
130                 haddr &= 0x00000001;
131                 mfsdram(DDR0_36, ldata);
132                 mfsdram(DDR0_37, hdata);
133                 if (int_status & DDR0_00_INT_STATUS_BIT5)
134                         debug("Multiple uncorrectable ECC events");
135                 else
136                         debug("Single uncorrectable ECC event");
137
138                 debug(" detected\n        0x%01x%08x - 0x%08x%08x, "
139                       "syndrome - 0x%02x\n",
140                       haddr, laddr, hdata, ldata, syndrome);
141         }
142         if (int_status & DDR0_00_INT_STATUS_BIT6)
143                 debug("DRAM initialization complete\n");
144 #endif /* defined(DEBUG) */
145
146         return int_status;
147 }
148
149 static int test_ecc(uint32_t ecc_addr)
150 {
151         uint32_t value;
152         volatile uint32_t *const ecc_mem = (volatile uint32_t *)ecc_addr;
153         int ret = 0;
154
155         WATCHDOG_RESET();
156
157         debug("Entering test_ecc(0x%08x)\n", ecc_addr);
158         /* Set up correct ECC in memory */
159         disable_ecc();
160         clear_and_enable_ecc();
161         out_be32(ecc_mem, ECC_PATTERN);
162         out_be32(ecc_mem + 1, ECC_PATTERN);
163         ppcDcbf((u32)ecc_mem);
164
165         /* Verify no ECC error reading back */
166         value = in_be32(ecc_mem);
167         disable_ecc();
168         if (ECC_PATTERN != value) {
169                 debug("Data read error (no-error case): "
170                       "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value);
171                 ret = 1;
172         }
173         value = get_ecc_status();
174         if (0x00000000 != value) {
175                 /* Expected no ECC status reported */
176                 debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
177                       0x00000000, value);
178                 ret = 1;
179         }
180
181         /* Test for correctable error by creating a one-bit error */
182         out_be32(ecc_mem, ECC_PATTERN_CORR);
183         ppcDcbf((u32)ecc_mem);
184         clear_and_enable_ecc();
185         value = in_be32(ecc_mem);
186         disable_ecc();
187         /* Test that the corrected data was read */
188         if (ECC_PATTERN != value) {
189                 debug("Data read error (correctable-error case): "
190                       "expected 0x%08x, read 0x%08x\n", ECC_PATTERN, value);
191                 ret = 1;
192         }
193         value = get_ecc_status();
194         if ((DDR0_00_INT_STATUS_BIT2 | DDR0_00_INT_STATUS_BIT7) != value) {
195                 /* Expected a single correctable error reported */
196                 debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
197                       DDR0_00_INT_STATUS_BIT2, value);
198                 ret = 1;
199         }
200
201         /* Test for uncorrectable error by creating a two-bit error */
202         out_be32(ecc_mem, ECC_PATTERN_UNCORR);
203         ppcDcbf((u32)ecc_mem);
204         clear_and_enable_ecc();
205         value = in_be32(ecc_mem);
206         disable_ecc();
207         /* Test that the corrected data was read */
208         if (ECC_PATTERN_UNCORR != value) {
209                 debug("Data read error (uncorrectable-error case): "
210                       "expected 0x%08x, read 0x%08x\n", ECC_PATTERN_UNCORR,
211                       value);
212                 ret = 1;
213         }
214         value = get_ecc_status();
215         if ((DDR0_00_INT_STATUS_BIT4 | DDR0_00_INT_STATUS_BIT7) != value) {
216                 /* Expected a single uncorrectable error reported */
217                 debug("get_ecc_status(): expected 0x%08x, got 0x%08x\n",
218                       DDR0_00_INT_STATUS_BIT4, value);
219                 ret = 1;
220         }
221
222         /* Remove error from SDRAM and enable ECC. */
223         out_be32(ecc_mem, ECC_PATTERN);
224         ppcDcbf((u32)ecc_mem);
225         clear_and_enable_ecc();
226
227         return ret;
228 }
229
230 int ecc_post_test(int flags)
231 {
232         int ret = 0;
233         uint32_t value;
234         uint32_t iaddr;
235
236         mfsdram(DDR0_22, value);
237         if (0x3 != DDR0_22_CTRL_RAW_DECODE(value)) {
238                 debug("SDRAM ECC not enabled, skipping ECC POST.\n");
239                 return 0;
240         }
241
242         /* Mask all interrupts. */
243         mfsdram(DDR0_01, value);
244         mtsdram(DDR0_01, (value & ~DDR0_01_INT_MASK_MASK)
245                 | DDR0_01_INT_MASK_ALL_OFF);
246
247         for (iaddr = ECC_START_ADDR; iaddr <= ECC_STOP_ADDR; iaddr += iaddr) {
248                 ret = test_ecc(iaddr);
249                 if (ret)
250                         break;
251         }
252         /*
253          * Clear possible errors resulting from ECC testing.  (If not done, we
254          * we could get an interrupt later on when exceptions are enabled.)
255          */
256         set_mcsr(get_mcsr());
257         debug("ecc_post_test() returning %d\n", ret);
258         return ret;
259 }
260 #endif /* CONFIG_POST & CONFIG_SYS_POST_ECC */
261 #endif /* defined(CONFIG_440EPX) || defined(CONFIG_440GRX) */