include/configs/xpedite517x.h

   1 /*
   2  * Copyright 2009 Extreme Engineering Solutions, Inc.
   3  * Copyright 2007-2008 Freescale Semiconductor, Inc.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * xpedite517x board configuration file
  10  */
  11 #ifndef __CONFIG_H
  12 #define __CONFIG_H
  13
  14 /*
  15  * High Level Configuration Options
  16  */
  17 #define CONFIG_XPEDITE5140      1       /* MPC8641HPCN board specific */
  18 #define CONFIG_SYS_BOARD_NAME   "XPedite5170"
  19 #define CONFIG_SYS_FORM_3U_VPX  1
  20 #define CONFIG_LINUX_RESET_VEC  0x100   /* Reset vector used by Linux */
  21 #define CONFIG_BOARD_EARLY_INIT_R       /* Call board_pre_init */
  22 #define CONFIG_BAT_RW           1       /* Use common BAT rw code */
  23 #define CONFIG_HIGH_BATS        1       /* High BATs supported and enabled */
  24 #define CONFIG_ALTIVEC          1
  25
  26 #define CONFIG_SYS_TEXT_BASE    0xfff00000
  27
  28 #define CONFIG_PCI_SCAN_SHOW    1       /* show pci devices on startup */
  29 #define CONFIG_PCIE1            1       /* PCIE controller 1 */
  30 #define CONFIG_PCIE2            1       /* PCIE controller 2 */
  31 #define CONFIG_FSL_PCI_INIT     1       /* Use common FSL init code */
  32 #define CONFIG_PCI_INDIRECT_BRIDGE 1    /* indirect PCI bridge support */
  33 #define CONFIG_SYS_PCI_64BIT    1       /* enable 64-bit PCI resources */
  34 #define CONFIG_FSL_LAW          1       /* Use common FSL init code */
  35
  36 /*
  37  * DDR config
  38  */
  39 #define CONFIG_SYS_FSL_DDR2
  40 #define CONFIG_SPD_EEPROM               /* Use SPD EEPROM for DDR setup */
  41 #define CONFIG_DDR_SPD
  42 #define CONFIG_MEM_INIT_VALUE           0xdeadbeef
  43 #define SPD_EEPROM_ADDRESS1             0x54    /* Both channels use the */
  44 #define SPD_EEPROM_ADDRESS2             0x54    /* same SPD data         */
  45 #define SPD_EEPROM_OFFSET               0x200   /* OFFSET of SPD in EEPROM */
  46 #define CONFIG_NUM_DDR_CONTROLLERS      2
  47 #define CONFIG_DIMM_SLOTS_PER_CTLR      1
  48 #define CONFIG_CHIP_SELECTS_PER_CTRL    1
  49 #define CONFIG_DDR_ECC
  50 #define CONFIG_ECC_INIT_VIA_DDRCONTROLLER
  51 #define CONFIG_SYS_DDR_SDRAM_BASE       0x00000000      /* DDR is system memory*/
  52 #define CONFIG_SYS_SDRAM_BASE           CONFIG_SYS_DDR_SDRAM_BASE
  53 #define CONFIG_VERY_BIG_RAM
  54 #define CONFIG_SYS_MAX_DDR_BAT_SIZE     0x80000000      /* BAT mapping size */
  55
  56 /*
  57  * virtual address to be used for temporary mappings.  There
  58  * should be 128k free at this VA.
  59  */
  60 #define CONFIG_SYS_SCRATCH_VA   0xe0000000
  61
  62 #ifndef __ASSEMBLY__
  63 extern unsigned long get_board_sys_clk(unsigned long dummy);
  64 #endif
  65
  66 #define CONFIG_SYS_CLK_FREQ     get_board_sys_clk(0) /* sysclk for MPC86xx */
  67
  68 /*
  69  * L2CR setup
  70  */
  71 #define CONFIG_SYS_L2
  72 #define L2_INIT         0
  73 #define L2_ENABLE       (L2CR_L2E)
  74
  75 /*
  76  * Base addresses -- Note these are effective addresses where the
  77  * actual resources get mapped (not physical addresses)
  78  */
  79 #define CONFIG_SYS_CCSRBAR_DEFAULT      0xff700000      /* CCSRBAR Default */
  80 #define CONFIG_SYS_CCSRBAR              0xef000000      /* relocated CCSRBAR */
  81 #define CONFIG_SYS_CCSRBAR_PHYS         CONFIG_SYS_CCSRBAR
  82 #define CONFIG_SYS_CCSRBAR_PHYS_LOW     CONFIG_SYS_CCSRBAR
  83 #define CONFIG_SYS_CCSRBAR_PHYS_HIGH    0x0
  84 #define CONFIG_SYS_IMMR                 CONFIG_SYS_CCSRBAR
  85
  86 /*
  87  * Diagnostics
  88  */
  89 #define CONFIG_SYS_ALT_MEMTEST
  90 #define CONFIG_SYS_MEMTEST_START        0x10000000
  91 #define CONFIG_SYS_MEMTEST_END          0x20000000
  92 #define CONFIG_POST                     (CONFIG_SYS_POST_MEMORY |\
  93                                          CONFIG_SYS_POST_I2C)
  94 #define I2C_ADDR_LIST                   {CONFIG_SYS_I2C_DS1621_ADDR,    \
  95                                          CONFIG_SYS_I2C_DS4510_ADDR,    \
  96                                          CONFIG_SYS_I2C_EEPROM_ADDR,    \
  97                                          CONFIG_SYS_I2C_LM90_ADDR,      \
  98                                          CONFIG_SYS_I2C_PCA9553_ADDR,   \
  99                                          CONFIG_SYS_I2C_PCA953X_ADDR0,  \
 100                                          CONFIG_SYS_I2C_PCA953X_ADDR1,  \
 101                                          CONFIG_SYS_I2C_PCA953X_ADDR2,  \
 102                                          CONFIG_SYS_I2C_PCA953X_ADDR3,  \
 103                                          CONFIG_SYS_I2C_PEX8518_ADDR,   \
 104                                          CONFIG_SYS_I2C_RTC_ADDR}
 105 /* The XPedite5170 can host an XMC which has an EEPROM at address 0x50 */
 106 #define I2C_ADDR_IGNORE_LIST            {0x50}
 107
 108 /*
 109  * Memory map
 110  * 0x0000_0000  0x7fff_ffff     DDR                     2G Cacheable
 111  * 0x8000_0000  0xbfff_ffff     PCIe1 Mem               1G non-cacheable
 112  * 0xc000_0000  0xcfff_ffff     PCIe2 Mem               256M non-cacheable
 113  * 0xe000_0000  0xe7ff_ffff     SRAM/SSRAM/L1 Cache     128M non-cacheable
 114  * 0xe800_0000  0xe87f_ffff     PCIe1 IO                8M non-cacheable
 115  * 0xe880_0000  0xe8ff_ffff     PCIe2 IO                8M non-cacheable
 116  * 0xef00_0000  0xef0f_ffff     CCSR/IMMR               1M non-cacheable
 117  * 0xef80_0000  0xef8f_ffff     NAND Flash              1M non-cacheable
 118  * 0xf000_0000  0xf7ff_ffff     NOR Flash 2             128M non-cacheable
 119  * 0xf800_0000  0xffff_ffff     NOR Flash 1             128M non-cacheable
 120  */
 121
 122 #define CONFIG_SYS_LBC_LCRR             (LCRR_CLKDIV_4 | LCRR_EADC_3)
 123
 124 /*
 125  * NAND flash configuration
 126  */
 127 #define CONFIG_SYS_NAND_BASE            0xef800000
 128 #define CONFIG_SYS_NAND_BASE2           0xef840000      /* Unused at this time */
 129 #define CONFIG_SYS_NAND_BASE_LIST       {CONFIG_SYS_NAND_BASE, CONFIG_SYS_NAND_BASE2}
 130 #define CONFIG_SYS_MAX_NAND_DEVICE      2
 131 #define CONFIG_NAND_ACTL
 132 #define CONFIG_SYS_NAND_ACTL_ALE        (1 << 14)       /* C_LA14 */
 133 #define CONFIG_SYS_NAND_ACTL_CLE        (1 << 15)       /* C_LA15 */
 134 #define CONFIG_SYS_NAND_ACTL_NCE        0               /* NCE not controlled by ADDR */
 135 #define CONFIG_SYS_NAND_ACTL_DELAY      25
 136 #define CONFIG_JFFS2_NAND
 137
 138 /*
 139  * NOR flash configuration
 140  */
 141 #define CONFIG_SYS_FLASH_BASE           0xf8000000
 142 #define CONFIG_SYS_FLASH_BASE2          0xf0000000
 143 #define CONFIG_SYS_FLASH_BANKS_LIST     {CONFIG_SYS_FLASH_BASE, CONFIG_SYS_FLASH_BASE2}
 144 #define CONFIG_SYS_MAX_FLASH_BANKS      2               /* number of banks */
 145 #define CONFIG_SYS_MAX_FLASH_SECT       1024            /* sectors per device */
 146 #define CONFIG_SYS_FLASH_ERASE_TOUT     60000           /* Flash Erase Timeout (ms) */
 147 #define CONFIG_SYS_FLASH_WRITE_TOUT     500             /* Flash Write Timeout (ms) */
 148 #define CONFIG_FLASH_CFI_DRIVER
 149 #define CONFIG_SYS_FLASH_CFI
 150 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
 151 #define CONFIG_SYS_FLASH_AUTOPROTECT_LIST       { {0xfff00000, 0xc0000}, \
 152                                                   {0xf7f00000, 0xc0000} }
 153 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE    /* start of monitor */
 154 #define CONFIG_SYS_MONITOR_BASE_EARLY   0xfff00000      /* early monitor loc */
 155
 156 /*
 157  * Chip select configuration
 158  */
 159 /* NOR Flash 0 on CS0 */
 160 #define CONFIG_SYS_BR0_PRELIM   (CONFIG_SYS_FLASH_BASE  |\
 161                                  BR_PS_16               |\
 162                                  BR_V)
 163 #define CONFIG_SYS_OR0_PRELIM   (OR_AM_128MB            |\
 164                                  OR_GPCM_CSNT           |\
 165                                  OR_GPCM_XACS           |\
 166                                  OR_GPCM_ACS_DIV2       |\
 167                                  OR_GPCM_SCY_8          |\
 168                                  OR_GPCM_TRLX           |\
 169                                  OR_GPCM_EHTR           |\
 170                                  OR_GPCM_EAD)
 171
 172 /* NOR Flash 1 on CS1 */
 173 #define CONFIG_SYS_BR1_PRELIM   (CONFIG_SYS_FLASH_BASE2 |\
 174                                  BR_PS_16               |\
 175                                  BR_V)
 176 #define CONFIG_SYS_OR1_PRELIM   CONFIG_SYS_OR0_PRELIM
 177
 178 /* NAND flash on CS2 */
 179 #define CONFIG_SYS_BR2_PRELIM   (CONFIG_SYS_NAND_BASE   |\
 180                                  BR_PS_8                |\
 181                                  BR_V)
 182 #define CONFIG_SYS_OR2_PRELIM   (OR_AM_256KB            |\
 183                                  OR_GPCM_BCTLD          |\
 184                                  OR_GPCM_CSNT           |\
 185                                  OR_GPCM_ACS_DIV4       |\
 186                                  OR_GPCM_SCY_4          |\
 187                                  OR_GPCM_TRLX           |\
 188                                  OR_GPCM_EHTR)
 189
 190 /* Optional NAND flash on CS3 */
 191 #define CONFIG_SYS_BR3_PRELIM   (CONFIG_SYS_NAND_BASE2  |\
 192                                  BR_PS_8                |\
 193                                  BR_V)
 194 #define CONFIG_SYS_OR3_PRELIM   CONFIG_SYS_OR2_PRELIM
 195
 196 /*
 197  * Use L1 as initial stack
 198  */
 199 #define CONFIG_SYS_INIT_RAM_LOCK        1
 200 #define CONFIG_SYS_INIT_RAM_ADDR        0xe0000000
 201 #define CONFIG_SYS_INIT_RAM_SIZE                0x00004000
 202
 203 #define CONFIG_SYS_GBL_DATA_OFFSET      (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 204 #define CONFIG_SYS_INIT_SP_OFFSET       CONFIG_SYS_GBL_DATA_OFFSET
 205
 206 #define CONFIG_SYS_MONITOR_LEN          (512 * 1024)    /* Reserve 512 KB for Mon */
 207 #define CONFIG_SYS_MALLOC_LEN           (1024 * 1024)   /* Reserved for malloc */
 208
 209 /*
 210  * Serial Port
 211  */
 212 #define CONFIG_CONS_INDEX               1
 213 #define CONFIG_SYS_NS16550_SERIAL
 214 #define CONFIG_SYS_NS16550_REG_SIZE     1
 215 #define CONFIG_SYS_NS16550_CLK          get_bus_freq(0)
 216 #define CONFIG_SYS_NS16550_COM1 (CONFIG_SYS_CCSRBAR+0x4500)
 217 #define CONFIG_SYS_NS16550_COM2 (CONFIG_SYS_CCSRBAR+0x4600)
 218 #define CONFIG_SYS_BAUDRATE_TABLE       \
 219         {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 115200}
 220 #define CONFIG_BAUDRATE                 115200
 221 #define CONFIG_LOADS_ECHO               1       /* echo on for serial download */
 222 #define CONFIG_SYS_LOADS_BAUD_CHANGE    1       /* allow baudrate change */
 223
 224 /*
 225  * I2C
 226  */
 227 #define CONFIG_SYS_I2C
 228 #define CONFIG_SYS_I2C_FSL
 229 #define CONFIG_SYS_FSL_I2C_SPEED        100000
 230 #define CONFIG_SYS_FSL_I2C_SLAVE        0x7F
 231 #define CONFIG_SYS_FSL_I2C_OFFSET       0x3000
 232 #define CONFIG_SYS_FSL_I2C2_SPEED       100000
 233 #define CONFIG_SYS_FSL_I2C2_SLAVE       0x7F
 234 #define CONFIG_SYS_FSL_I2C2_OFFSET      0x3100
 235
 236 /* PEX8518 slave I2C interface */
 237 #define CONFIG_SYS_I2C_PEX8518_ADDR     0x70
 238
 239 /* I2C DS1631 temperature sensor */
 240 #define CONFIG_SYS_I2C_DS1621_ADDR      0x48
 241 #define CONFIG_DTT_DS1621
 242 #define CONFIG_DTT_SENSORS              { 0 }
 243 #define CONFIG_SYS_I2C_LM90_ADDR        0x4c
 244
 245 /* I2C EEPROM - AT24C128B */
 246 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x54
 247 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 248 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6       /* 64 byte pages */
 249 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   10      /* take up to 10 msec */
 250
 251 /* I2C RTC */
 252 #define CONFIG_RTC_M41T11               1
 253 #define CONFIG_SYS_I2C_RTC_ADDR         0x68
 254 #define CONFIG_SYS_M41T11_BASE_YEAR     2000
 255
 256 /* GPIO/EEPROM/SRAM */
 257 #define CONFIG_DS4510
 258 #define CONFIG_SYS_I2C_DS4510_ADDR      0x51
 259
 260 /* GPIO */
 261 #define CONFIG_PCA953X
 262 #define CONFIG_SYS_I2C_PCA953X_ADDR0    0x18
 263 #define CONFIG_SYS_I2C_PCA953X_ADDR1    0x1c
 264 #define CONFIG_SYS_I2C_PCA953X_ADDR2    0x1e
 265 #define CONFIG_SYS_I2C_PCA953X_ADDR3    0x1f
 266 #define CONFIG_SYS_I2C_PCA953X_ADDR     CONFIG_SYS_I2C_PCA953X_ADDR0
 267 #define CONFIG_SYS_I2C_PCA9553_ADDR     0x62
 268
 269 /*
 270  * PU = pulled high, PD = pulled low
 271  * I = input, O = output, IO = input/output
 272  */
 273 /* PCA9557 @ 0x18*/
 274 #define CONFIG_SYS_PCA953X_C0_SER0_EN           0x01 /* PU; UART0 enable (1: enabled) */
 275 #define CONFIG_SYS_PCA953X_C0_SER0_MODE         0x02 /* PU; UART0 serial mode select */
 276 #define CONFIG_SYS_PCA953X_C0_SER1_EN           0x04 /* PU; UART1 enable (1: enabled) */
 277 #define CONFIG_SYS_PCA953X_C0_SER1_MODE         0x08 /* PU; UART1 serial mode select */
 278 #define CONFIG_SYS_PCA953X_C0_FLASH_PASS_CS     0x10 /* PU; Boot flash CS select */
 279 #define CONFIG_SYS_PCA953X_NVM_WP               0x20 /* PU; Set to 0 to enable NVM writing */
 280
 281 /* PCA9557 @ 0x1c*/
 282 #define CONFIG_SYS_PCA953X_XMC0_ROOT0           0x01 /* PU; Low if XMC is RC */
 283 #define CONFIG_SYS_PCA953X_PLUG_GPIO0           0x02 /* Samtec connector GPIO */
 284 #define CONFIG_SYS_PCA953X_XMC0_WAKE            0x04 /* PU; XMC wake */
 285 #define CONFIG_SYS_PCA953X_XMC0_BIST            0x08 /* PU; XMC built in self test */
 286 #define CONFIG_SYS_PCA953X_XMC_PRESENT          0x10 /* PU; Low if XMC module installed */
 287 #define CONFIG_SYS_PCA953X_PMC_PRESENT          0x20 /* PU; Low if PMC module installed */
 288 #define CONFIG_SYS_PCA953X_PMC0_MONARCH         0x40 /* PMC monarch mode enable */
 289 #define CONFIG_SYS_PCA953X_PMC0_EREADY          0x80 /* PU; PMC PCI eready */
 290
 291 /* PCA9557 @ 0x1e*/
 292 #define CONFIG_SYS_PCA953X_P0_GA0               0x01 /* PU; VPX Geographical address */
 293 #define CONFIG_SYS_PCA953X_P0_GA1               0x02 /* PU; VPX Geographical address */
 294 #define CONFIG_SYS_PCA953X_P0_GA2               0x04 /* PU; VPX Geographical address */
 295 #define CONFIG_SYS_PCA953X_P0_GA3               0x08 /* PU; VPX Geographical address */
 296 #define CONFIG_SYS_PCA953X_P0_GA4               0x10 /* PU; VPX Geographical address */
 297 #define CONFIG_SYS_PCA953X_P0_GAP               0x20 /* PU; VPX Geographical address parity */
 298 #define CONFIG_SYS_PCA953X_P1_SYSEN             0x80 /* PU; VPX P1 SYSCON */
 299
 300 /* PCA9557 @ 0x1f */
 301 #define CONFIG_SYS_PCA953X_VPX_GPIO0            0x01 /* PU; VPX P15 GPIO */
 302 #define CONFIG_SYS_PCA953X_VPX_GPIO1            0x02 /* PU; VPX P15 GPIO */
 303 #define CONFIG_SYS_PCA953X_VPX_GPIO2            0x04 /* PU; VPX P15 GPIO */
 304 #define CONFIG_SYS_PCA953X_VPX_GPIO3            0x08 /* PU; VPX P15 GPIO */
 305
 306 /*
 307  * General PCI
 308  * Memory space is mapped 1-1, but I/O space must start from 0.
 309  */
 310 /* PCIE1 - PEX8518 */
 311 #define CONFIG_SYS_PCIE1_MEM_BUS        0x80000000
 312 #define CONFIG_SYS_PCIE1_MEM_PHYS       CONFIG_SYS_PCIE1_MEM_BUS
 313 #define CONFIG_SYS_PCIE1_MEM_SIZE       0x40000000      /* 1G */
 314 #define CONFIG_SYS_PCIE1_IO_BUS         0x00000000
 315 #define CONFIG_SYS_PCIE1_IO_PHYS        0xe8000000
 316 #define CONFIG_SYS_PCIE1_IO_SIZE        0x00800000      /* 8M */
 317
 318 /* PCIE2 - VPX P1 */
 319 #define CONFIG_SYS_PCIE2_MEM_BUS        0xc0000000
 320 #define CONFIG_SYS_PCIE2_MEM_PHYS       CONFIG_SYS_PCIE2_MEM_BUS
 321 #define CONFIG_SYS_PCIE2_MEM_SIZE       0x10000000      /* 256M */
 322 #define CONFIG_SYS_PCIE2_IO_BUS         0x00000000
 323 #define CONFIG_SYS_PCIE2_IO_PHYS        0xe8800000
 324 #define CONFIG_SYS_PCIE2_IO_SIZE        0x00800000      /* 8M */
 325
 326 /*
 327  * Networking options
 328  */
 329 #define CONFIG_TSEC_ENET                /* tsec ethernet support */
 330 #define CONFIG_PHY_GIGE         1       /* Include GbE speed/duplex detection */
 331 #define CONFIG_MII              1       /* MII PHY management */
 332 #define CONFIG_ETHPRIME         "eTSEC1"
 333
 334 #define CONFIG_TSEC1            1
 335 #define CONFIG_TSEC1_NAME       "eTSEC1"
 336 #define TSEC1_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 337 #define TSEC1_PHY_ADDR          1
 338 #define TSEC1_PHYIDX            0
 339 #define CONFIG_HAS_ETH0
 340
 341 #define CONFIG_TSEC2            1
 342 #define CONFIG_TSEC2_NAME       "eTSEC2"
 343 #define TSEC2_FLAGS             (TSEC_GIGABIT | TSEC_REDUCED)
 344 #define TSEC2_PHY_ADDR          2
 345 #define TSEC2_PHYIDX            0
 346 #define CONFIG_HAS_ETH1
 347
 348 /*
 349  * BAT mappings
 350  */
 351 #if (CONFIG_SYS_CCSRBAR_DEFAULT != CONFIG_SYS_CCSRBAR)
 352 #define CONFIG_SYS_CCSR_DEFAULT_DBATL   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 353                                          BATL_PP_RW                     |\
 354                                          BATL_CACHEINHIBIT              |\
 355                                          BATL_GUARDEDSTORAGE)
 356 #define CONFIG_SYS_CCSR_DEFAULT_DBATU   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 357                                          BATU_BL_1M                     |\
 358                                          BATU_VS                        |\
 359                                          BATU_VP)
 360 #define CONFIG_SYS_CCSR_DEFAULT_IBATL   (CONFIG_SYS_CCSRBAR_DEFAULT     |\
 361                                          BATL_PP_RW                     |\
 362                                          BATL_CACHEINHIBIT)
 363 #define CONFIG_SYS_CCSR_DEFAULT_IBATU   CONFIG_SYS_CCSR_DEFAULT_DBATU
 364 #endif
 365
 366 /*
 367  * BAT0         2G      Cacheable, non-guarded
 368  * 0x0000_0000  2G      DDR
 369  */
 370 #define CONFIG_SYS_DBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 371 #define CONFIG_SYS_DBAT0U       (BATU_BL_2G | BATU_VS | BATU_VP)
 372 #define CONFIG_SYS_IBAT0L       (BATL_PP_RW | BATL_MEMCOHERENCE)
 373 #define CONFIG_SYS_IBAT0U       CONFIG_SYS_DBAT0U
 374
 375 /*
 376  * BAT1         1G      Cache-inhibited, guarded
 377  * 0x8000_0000  1G      PCI-Express 1 Memory
 378  */
 379 #define CONFIG_SYS_DBAT1L       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 380                                  BATL_PP_RW                     |\
 381                                  BATL_CACHEINHIBIT              |\
 382                                  BATL_GUARDEDSTORAGE)
 383 #define CONFIG_SYS_DBAT1U       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 384                                  BATU_BL_1G                     |\
 385                                  BATU_VS                        |\
 386                                  BATU_VP)
 387 #define CONFIG_SYS_IBAT1L       (CONFIG_SYS_PCIE1_MEM_PHYS      |\
 388                                  BATL_PP_RW                     |\
 389                                  BATL_CACHEINHIBIT)
 390 #define CONFIG_SYS_IBAT1U       CONFIG_SYS_DBAT1U
 391
 392 /*
 393  * BAT2         512M    Cache-inhibited, guarded
 394  * 0xc000_0000  512M    PCI-Express 2 Memory
 395  */
 396 #define CONFIG_SYS_DBAT2L       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 397                                  BATL_PP_RW                     |\
 398                                  BATL_CACHEINHIBIT              |\
 399                                  BATL_GUARDEDSTORAGE)
 400 #define CONFIG_SYS_DBAT2U       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 401                                  BATU_BL_512M                   |\
 402                                  BATU_VS                        |\
 403                                  BATU_VP)
 404 #define CONFIG_SYS_IBAT2L       (CONFIG_SYS_PCIE2_MEM_PHYS      |\
 405                                  BATL_PP_RW                     |\
 406                                  BATL_CACHEINHIBIT)
 407 #define CONFIG_SYS_IBAT2U       CONFIG_SYS_DBAT2U
 408
 409 /*
 410  * BAT3         1M      Cache-inhibited, guarded
 411  * 0xe000_0000  1M      CCSR
 412  */
 413 #define CONFIG_SYS_DBAT3L       (CONFIG_SYS_CCSRBAR             |\
 414                                  BATL_PP_RW                     |\
 415                                  BATL_CACHEINHIBIT              |\
 416                                  BATL_GUARDEDSTORAGE)
 417 #define CONFIG_SYS_DBAT3U       (CONFIG_SYS_CCSRBAR             |\
 418                                  BATU_BL_1M                     |\
 419                                  BATU_VS                        |\
 420                                  BATU_VP)
 421 #define CONFIG_SYS_IBAT3L       (CONFIG_SYS_CCSRBAR             |\
 422                                  BATL_PP_RW                     |\
 423                                  BATL_CACHEINHIBIT)
 424 #define CONFIG_SYS_IBAT3U       CONFIG_SYS_DBAT3U
 425
 426 /*
 427  * BAT4         32M     Cache-inhibited, guarded
 428  * 0xe200_0000  16M     PCI-Express 1 I/O
 429  * 0xe300_0000  16M     PCI-Express 2 I/0
 430  */
 431 #define CONFIG_SYS_DBAT4L       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 432                                  BATL_PP_RW                     |\
 433                                  BATL_CACHEINHIBIT              |\
 434                                  BATL_GUARDEDSTORAGE)
 435 #define CONFIG_SYS_DBAT4U       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 436                                  BATU_BL_32M                    |\
 437                                  BATU_VS                        |\
 438                                  BATU_VP)
 439 #define CONFIG_SYS_IBAT4L       (CONFIG_SYS_PCIE1_IO_PHYS       |\
 440                                  BATL_PP_RW                     |\
 441                                  BATL_CACHEINHIBIT)
 442 #define CONFIG_SYS_IBAT4U       CONFIG_SYS_DBAT4U
 443
 444 /*
 445  * BAT5         128K    Cacheable, non-guarded
 446  * 0xe400_1000  128K    Init RAM for stack in the CPU DCache (no backing memory)
 447  */
 448 #define CONFIG_SYS_DBAT5L       (CONFIG_SYS_INIT_RAM_ADDR       |\
 449                                  BATL_PP_RW                     |\
 450                                  BATL_MEMCOHERENCE)
 451 #define CONFIG_SYS_DBAT5U       (CONFIG_SYS_INIT_RAM_ADDR       |\
 452                                  BATU_BL_128K                   |\
 453                                  BATU_VS                        |\
 454                                  BATU_VP)
 455 #define CONFIG_SYS_IBAT5L       CONFIG_SYS_DBAT5L
 456 #define CONFIG_SYS_IBAT5U       CONFIG_SYS_DBAT5U
 457
 458 /*
 459  * BAT6         256M    Cache-inhibited, guarded
 460  * 0xf000_0000  256M    FLASH
 461  */
 462 #define CONFIG_SYS_DBAT6L       (CONFIG_SYS_FLASH_BASE2         |\
 463                                  BATL_PP_RW                     |\
 464                                  BATL_CACHEINHIBIT              |\
 465                                  BATL_GUARDEDSTORAGE)
 466 #define CONFIG_SYS_DBAT6U       (CONFIG_SYS_FLASH_BASE          |\
 467                                  BATU_BL_256M                   |\
 468                                  BATU_VS                        |\
 469                                  BATU_VP)
 470 #define CONFIG_SYS_IBAT6L       (CONFIG_SYS_FLASH_BASE          |\
 471                                  BATL_PP_RW                     |\
 472                                  BATL_MEMCOHERENCE)
 473 #define CONFIG_SYS_IBAT6U       CONFIG_SYS_DBAT6U
 474
 475 /* Map the last 1M of flash where we're running from reset */
 476 #define CONFIG_SYS_DBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY  |\
 477                                  BATL_PP_RW                     |\
 478                                  BATL_CACHEINHIBIT              |\
 479                                  BATL_GUARDEDSTORAGE)
 480 #define CONFIG_SYS_DBAT6U_EARLY (CONFIG_SYS_TEXT_BASE                   |\
 481                                  BATU_BL_1M                     |\
 482                                  BATU_VS                        |\
 483                                  BATU_VP)
 484 #define CONFIG_SYS_IBAT6L_EARLY (CONFIG_SYS_MONITOR_BASE_EARLY  |\
 485                                  BATL_PP_RW                     |\
 486                                  BATL_MEMCOHERENCE)
 487 #define CONFIG_SYS_IBAT6U_EARLY CONFIG_SYS_DBAT6U_EARLY
 488
 489 /*
 490  * BAT7         64M     Cache-inhibited, guarded
 491  * 0xe800_0000  64K     NAND FLASH
 492  * 0xe804_0000  128K    DUART Registers
 493  */
 494 #define CONFIG_SYS_DBAT7L       (CONFIG_SYS_NAND_BASE           |\
 495                                  BATL_PP_RW                     |\
 496                                  BATL_CACHEINHIBIT              |\
 497                                  BATL_GUARDEDSTORAGE)
 498 #define CONFIG_SYS_DBAT7U       (CONFIG_SYS_NAND_BASE           |\
 499                                  BATU_BL_512K                   |\
 500                                  BATU_VS                        |\
 501                                  BATU_VP)
 502 #define CONFIG_SYS_IBAT7L       (CONFIG_SYS_NAND_BASE           |\
 503                                  BATL_PP_RW                     |\
 504                                  BATL_CACHEINHIBIT)
 505 #define CONFIG_SYS_IBAT7U       CONFIG_SYS_DBAT7U
 506
 507 /*
 508  * Command configuration.
 509  */
 510 #define CONFIG_CMD_DATE
 511 #define CONFIG_CMD_DS4510
 512 #define CONFIG_CMD_DS4510_INFO
 513 #define CONFIG_CMD_DTT
 514 #define CONFIG_CMD_EEPROM
 515 #define CONFIG_CMD_IRQ
 516 #define CONFIG_CMD_JFFS2
 517 #define CONFIG_CMD_NAND
 518 #define CONFIG_CMD_PCA953X
 519 #define CONFIG_CMD_PCA953X_INFO
 520 #define CONFIG_CMD_PCI
 521 #define CONFIG_CMD_PCI_ENUM
 522 #define CONFIG_CMD_REGINFO
 523
 524 /*
 525  * Miscellaneous configurable options
 526  */
 527 #define CONFIG_SYS_LONGHELP                     /* undef to save memory */
 528 #define CONFIG_SYS_LOAD_ADDR    0x2000000       /* default load address */
 529 #define CONFIG_SYS_CBSIZE       256             /* Console I/O Buffer Size */
 530 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
 531 #define CONFIG_SYS_MAXARGS      16              /* max number of command args */
 532 #define CONFIG_SYS_BARGSIZE     CONFIG_SYS_CBSIZE       /* Boot Argument Buffer Size */
 533 #define CONFIG_CMDLINE_EDITING  1               /* Command-line editing */
 534 #define CONFIG_LOADADDR         0x1000000       /* default location for tftp and bootm */
 535 #define CONFIG_PANIC_HANG                       /* do not reset board on panic */
 536 #define CONFIG_PREBOOT                          /* enable preboot variable */
 537 #define CONFIG_INTEGRITY                        /* support booting INTEGRITY OS */
 538
 539 /*
 540  * For booting Linux, the board info and command line data
 541  * have to be in the first 16 MB of memory, since this is
 542  * the maximum mapped by the Linux kernel during initialization.
 543  */
 544 #define CONFIG_SYS_BOOTMAPSZ    (16 << 20)      /* Initial Memory map for Linux*/
 545 #define CONFIG_SYS_BOOTM_LEN    (16 << 20)      /* Increase max gunzip size */
 546
 547 /*
 548  * Environment Configuration
 549  */
 550 #define CONFIG_ENV_IS_IN_FLASH  1
 551 #define CONFIG_ENV_SECT_SIZE    0x20000         /* 128k (one sector) for env */
 552 #define CONFIG_ENV_SIZE         0x8000
 553 #define CONFIG_ENV_ADDR         (CONFIG_SYS_MONITOR_BASE + CONFIG_SYS_MONITOR_LEN)
 554
 555 /*
 556  * Flash memory map:
 557  * fffc0000 - ffffffff  Pri FDT (256KB)
 558  * fff80000 - fffbffff  Pri U-Boot Environment (256 KB)
 559  * fff00000 - fff7ffff  Pri U-Boot (512 KB)
 560  * fef00000 - ffefffff  Pri OS image (16MB)
 561  * f8000000 - feefffff  Pri OS Use/Filesystem (111MB)
 562  *
 563  * f7fc0000 - f7ffffff  Sec FDT (256KB)
 564  * f7f80000 - f7fbffff  Sec U-Boot Environment (256 KB)
 565  * f7f00000 - f7f7ffff  Sec U-Boot (512 KB)
 566  * f6f00000 - f7efffff  Sec OS image (16MB)
 567  * f0000000 - f6efffff  Sec OS Use/Filesystem (111MB)
 568  */
 569 #define CONFIG_UBOOT1_ENV_ADDR  __stringify(0xfff00000)
 570 #define CONFIG_UBOOT2_ENV_ADDR  __stringify(0xf7f00000)
 571 #define CONFIG_FDT1_ENV_ADDR    __stringify(0xfffc0000)
 572 #define CONFIG_FDT2_ENV_ADDR    __stringify(0xf7fc0000)
 573 #define CONFIG_OS1_ENV_ADDR     __stringify(0xfef00000)
 574 #define CONFIG_OS2_ENV_ADDR     __stringify(0xf6f00000)
 575
 576 #define CONFIG_PROG_UBOOT1                                              \
 577         "$download_cmd $loadaddr $ubootfile; "                          \
 578         "if test $? -eq 0; then "                                       \
 579                 "protect off "CONFIG_UBOOT1_ENV_ADDR" +80000; "         \
 580                 "erase "CONFIG_UBOOT1_ENV_ADDR" +80000; "               \
 581                 "cp.w $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 40000; "       \
 582                 "protect on "CONFIG_UBOOT1_ENV_ADDR" +80000; "          \
 583                 "cmp.b $loadaddr "CONFIG_UBOOT1_ENV_ADDR" 80000; "      \
 584                 "if test $? -ne 0; then "                               \
 585                         "echo PROGRAM FAILED; "                         \
 586                 "else; "                                                \
 587                         "echo PROGRAM SUCCEEDED; "                      \
 588                 "fi; "                                                  \
 589         "else; "                                                        \
 590                 "echo DOWNLOAD FAILED; "                                \
 591         "fi;"
 592
 593 #define CONFIG_PROG_UBOOT2                                              \
 594         "$download_cmd $loadaddr $ubootfile; "                          \
 595         "if test $? -eq 0; then "                                       \
 596                 "protect off "CONFIG_UBOOT2_ENV_ADDR" +80000; "         \
 597                 "erase "CONFIG_UBOOT2_ENV_ADDR" +80000; "               \
 598                 "cp.w $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 40000; "       \
 599                 "protect on "CONFIG_UBOOT2_ENV_ADDR" +80000; "          \
 600                 "cmp.b $loadaddr "CONFIG_UBOOT2_ENV_ADDR" 80000; "      \
 601                 "if test $? -ne 0; then "                               \
 602                         "echo PROGRAM FAILED; "                         \
 603                 "else; "                                                \
 604                         "echo PROGRAM SUCCEEDED; "                      \
 605                 "fi; "                                                  \
 606         "else; "                                                        \
 607                 "echo DOWNLOAD FAILED; "                                \
 608         "fi;"
 609
 610 #define CONFIG_BOOT_OS_NET                                              \
 611         "$download_cmd $osaddr $osfile; "                               \
 612         "if test $? -eq 0; then "                                       \
 613                 "if test -n $fdtaddr; then "                            \
 614                         "$download_cmd $fdtaddr $fdtfile; "             \
 615                         "if test $? -eq 0; then "                       \
 616                                 "bootm $osaddr - $fdtaddr; "            \
 617                         "else; "                                        \
 618                                 "echo FDT DOWNLOAD FAILED; "            \
 619                         "fi; "                                          \
 620                 "else; "                                                \
 621                         "bootm $osaddr; "                               \
 622                 "fi; "                                                  \
 623         "else; "                                                        \
 624                 "echo OS DOWNLOAD FAILED; "                             \
 625         "fi;"
 626
 627 #define CONFIG_PROG_OS1                                                 \
 628         "$download_cmd $osaddr $osfile; "                               \
 629         "if test $? -eq 0; then "                                       \
 630                 "erase "CONFIG_OS1_ENV_ADDR" +$filesize; "              \
 631                 "cp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "        \
 632                 "cmp.b $osaddr "CONFIG_OS1_ENV_ADDR" $filesize; "       \
 633                 "if test $? -ne 0; then "                               \
 634                         "echo OS PROGRAM FAILED; "                      \
 635                 "else; "                                                \
 636                         "echo OS PROGRAM SUCCEEDED; "                   \
 637                 "fi; "                                                  \
 638         "else; "                                                        \
 639                 "echo OS DOWNLOAD FAILED; "                             \
 640         "fi;"
 641
 642 #define CONFIG_PROG_OS2                                                 \
 643         "$download_cmd $osaddr $osfile; "                               \
 644         "if test $? -eq 0; then "                                       \
 645                 "erase "CONFIG_OS2_ENV_ADDR" +$filesize; "              \
 646                 "cp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "        \
 647                 "cmp.b $osaddr "CONFIG_OS2_ENV_ADDR" $filesize; "       \
 648                 "if test $? -ne 0; then "                               \
 649                         "echo OS PROGRAM FAILED; "                      \
 650                 "else; "                                                \
 651                         "echo OS PROGRAM SUCCEEDED; "                   \
 652                 "fi; "                                                  \
 653         "else; "                                                        \
 654                 "echo OS DOWNLOAD FAILED; "                             \
 655         "fi;"
 656
 657 #define CONFIG_PROG_FDT1                                                \
 658         "$download_cmd $fdtaddr $fdtfile; "                             \
 659         "if test $? -eq 0; then "                                       \
 660                 "erase "CONFIG_FDT1_ENV_ADDR" +$filesize;"              \
 661                 "cp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "      \
 662                 "cmp.b $fdtaddr "CONFIG_FDT1_ENV_ADDR" $filesize; "     \
 663                 "if test $? -ne 0; then "                               \
 664                         "echo FDT PROGRAM FAILED; "                     \
 665                 "else; "                                                \
 666                         "echo FDT PROGRAM SUCCEEDED; "                  \
 667                 "fi; "                                                  \
 668         "else; "                                                        \
 669                 "echo FDT DOWNLOAD FAILED; "                            \
 670         "fi;"
 671
 672 #define CONFIG_PROG_FDT2                                                \
 673         "$download_cmd $fdtaddr $fdtfile; "                             \
 674         "if test $? -eq 0; then "                                       \
 675                 "erase "CONFIG_FDT2_ENV_ADDR" +$filesize;"              \
 676                 "cp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "      \
 677                 "cmp.b $fdtaddr "CONFIG_FDT2_ENV_ADDR" $filesize; "     \
 678                 "if test $? -ne 0; then "                               \
 679                         "echo FDT PROGRAM FAILED; "                     \
 680                 "else; "                                                \
 681                         "echo FDT PROGRAM SUCCEEDED; "                  \
 682                 "fi; "                                                  \
 683         "else; "                                                        \
 684                 "echo FDT DOWNLOAD FAILED; "                            \
 685         "fi;"
 686
 687 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 688         "autoload=yes\0"                                                \
 689         "download_cmd=tftp\0"                                           \
 690         "console_args=console=ttyS0,115200\0"                           \
 691         "root_args=root=/dev/nfs rw\0"                                  \
 692         "misc_args=ip=on\0"                                             \
 693         "set_bootargs=setenv bootargs ${console_args} ${root_args} ${misc_args}\0" \
 694         "bootfile=/home/user/file\0"                                    \
 695         "osfile=/home/user/board.uImage\0"                              \
 696         "fdtfile=/home/user/board.dtb\0"                                \
 697         "ubootfile=/home/user/u-boot.bin\0"                             \
 698         "fdtaddr=0x1e00000\0"                                           \
 699         "osaddr=0x1000000\0"                                            \
 700         "loadaddr=0x1000000\0"                                          \
 701         "prog_uboot1="CONFIG_PROG_UBOOT1"\0"                            \
 702         "prog_uboot2="CONFIG_PROG_UBOOT2"\0"                            \
 703         "prog_os1="CONFIG_PROG_OS1"\0"                                  \
 704         "prog_os2="CONFIG_PROG_OS2"\0"                                  \
 705         "prog_fdt1="CONFIG_PROG_FDT1"\0"                                \
 706         "prog_fdt2="CONFIG_PROG_FDT2"\0"                                \
 707         "bootcmd_net=run set_bootargs; "CONFIG_BOOT_OS_NET"\0"          \
 708         "bootcmd_flash1=run set_bootargs; "                             \
 709                 "bootm "CONFIG_OS1_ENV_ADDR" - "CONFIG_FDT1_ENV_ADDR"\0"\
 710         "bootcmd_flash2=run set_bootargs; "                             \
 711                 "bootm "CONFIG_OS2_ENV_ADDR" - "CONFIG_FDT2_ENV_ADDR"\0"\
 712         "bootcmd=run bootcmd_flash1\0"
 713 #endif  /* __CONFIG_H */