include/configs/x600.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2009, STMicroelectronics - All Rights Reserved
   4  * Author(s): Vipin Kumar, <vipin.kumar@st.com> for STMicroelectronics.
   5  *
   6  * Copyright (C) 2012, 2015 Stefan Roese <sr@denx.de>
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 /*
  13  * High Level Configuration Options
  14  * (easy to change)
  15  */
  16 #define CONFIG_SPEAR600                         /* SPEAr600 SoC */
  17 #define CONFIG_X600                             /* on X600 board */
  18
  19 #include <asm/arch/hardware.h>
  20
  21 /* Timer, HZ specific defines */
  22 #define CONFIG_SYS_HZ_CLOCK                     8300000
  23
  24 #define CONFIG_SYS_FLASH_BASE                   0xf8000000
  25 /* Reserve 8KiB for SPL */
  26 #define CONFIG_SPL_PAD_TO                       8192    /* decimal for 'dd' */
  27 #define CONFIG_SYS_SPL_LEN                      CONFIG_SPL_PAD_TO
  28 #define CONFIG_SYS_UBOOT_BASE                   (CONFIG_SYS_FLASH_BASE + \
  29                                                  CONFIG_SYS_SPL_LEN)
  30 #define CONFIG_SYS_UBOOT_START                  CONFIG_SYS_TEXT_BASE
  31 #define CONFIG_SYS_MONITOR_BASE                 CONFIG_SYS_FLASH_BASE
  32 #define CONFIG_SYS_MONITOR_LEN                  0x60000
  33
  34 /* Serial Configuration (PL011) */
  35 #define CONFIG_SYS_SERIAL0                      0xD0000000
  36 #define CONFIG_SYS_SERIAL1                      0xD0080000
  37 #define CONFIG_PL01x_PORTS                      { (void *)CONFIG_SYS_SERIAL0, \
  38                                                 (void *)CONFIG_SYS_SERIAL1 }
  39 #define CONFIG_PL011_CLOCK                      (48 * 1000 * 1000)
  40 #define CONFIG_SYS_BAUDRATE_TABLE               { 9600, 19200, 38400, \
  41                                                   57600, 115200 }
  42 #define CONFIG_SYS_LOADS_BAUD_CHANGE
  43
  44 /* NOR FLASH config options */
  45 #define CONFIG_ST_SMI
  46 #define CONFIG_SYS_MAX_FLASH_BANKS              1
  47 #define CONFIG_SYS_FLASH_BANK_SIZE              0x01000000
  48 #define CONFIG_SYS_FLASH_ADDR_BASE              { CONFIG_SYS_FLASH_BASE }
  49 #define CONFIG_SYS_MAX_FLASH_SECT               128
  50 #define CONFIG_SYS_FLASH_EMPTY_INFO
  51 #define CONFIG_SYS_FLASH_ERASE_TOUT             (3 * CONFIG_SYS_HZ)
  52 #define CONFIG_SYS_FLASH_WRITE_TOUT             (3 * CONFIG_SYS_HZ)
  53
  54 /* NAND FLASH config options */
  55 #define CONFIG_NAND_FSMC
  56 #define CONFIG_SYS_NAND_SELF_INIT
  57 #define CONFIG_SYS_MAX_NAND_DEVICE              1
  58 #define CONFIG_SYS_NAND_BASE                    CONFIG_FSMC_NAND_BASE
  59 #define CONFIG_MTD_ECC_SOFT
  60 #define CONFIG_SYS_FSMC_NAND_8BIT
  61 #define CONFIG_SYS_NAND_ONFI_DETECTION
  62 #define CONFIG_NAND_ECC_BCH
  63
  64 /* UBI/UBI config options */
  65 #define CONFIG_MTD_DEVICE
  66 #define CONFIG_MTD_PARTITIONS
  67
  68 /* Ethernet config options */
  69 #define CONFIG_MII
  70 #define CONFIG_PHY_RESET_DELAY                  10000           /* in usec */
  71
  72 #define CONFIG_SPEAR_GPIO
  73
  74 /* I2C config options */
  75 #define CONFIG_SYS_I2C
  76 #define CONFIG_SYS_I2C_BASE                     0xD0200000
  77 #define CONFIG_SYS_I2C_SPEED                    400000
  78 #define CONFIG_SYS_I2C_SLAVE                    0x02
  79 #define CONFIG_I2C_CHIPADDRESS                  0x50
  80
  81 #define CONFIG_RTC_M41T62       1
  82 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
  83
  84 /* FPGA config options */
  85 #define CONFIG_FPGA_COUNT       1
  86
  87 /* USB EHCI options */
  88 #define CONFIG_USB_EHCI_SPEAR
  89 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  90
  91 /*
  92  * U-Boot Environment placing definitions.
  93  */
  94 #define CONFIG_ENV_SECT_SIZE                    0x00010000
  95 #define CONFIG_ENV_ADDR                         (CONFIG_SYS_MONITOR_BASE + \
  96                                                  CONFIG_SYS_MONITOR_LEN)
  97 #define CONFIG_ENV_SIZE                         0x02000
  98 #define CONFIG_ENV_ADDR_REDUND                  (CONFIG_ENV_ADDR + \
  99                                                  CONFIG_ENV_SECT_SIZE)
 100 #define CONFIG_ENV_SIZE_REDUND                  (CONFIG_ENV_SIZE)
 101
 102 /* Miscellaneous configurable options */
 103 #define CONFIG_ARCH_CPU_INIT
 104 #define CONFIG_BOOT_PARAMS_ADDR                 0x00000100
 105 #define CONFIG_CMDLINE_TAG
 106 #define CONFIG_SETUP_MEMORY_TAGS
 107 #define CONFIG_MISC_INIT_R
 108 #define CONFIG_MX_CYCLIC                /* enable mdc/mwc commands      */
 109
 110 #define CONFIG_SYS_MEMTEST_START                0x00800000
 111 #define CONFIG_SYS_MEMTEST_END                  0x04000000
 112 #define CONFIG_SYS_MALLOC_LEN                   (8 << 20)
 113 #define CONFIG_SYS_LOAD_ADDR                    0x00800000
 114
 115 #define CONFIG_HOSTNAME                         "x600"
 116 #define CONFIG_UBI_PART                         ubi0
 117 #define CONFIG_UBIFS_VOLUME                     rootfs
 118
 119 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 120         "u-boot_addr=1000000\0"                                         \
 121         "u-boot=" CONFIG_HOSTNAME "/u-boot.spr\0"               \
 122         "load=tftp ${u-boot_addr} ${u-boot}\0"                          \
 123         "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 124                 " +${filesize};"                                        \
 125                 "erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
 126                 "cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \
 127                 " ${filesize};"                                         \
 128                 "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 129                 " +${filesize}\0"                                       \
 130         "upd=run load update\0"                                         \
 131         "ubifs=" CONFIG_HOSTNAME "/ubifs.img\0"         \
 132         "part=" __stringify(CONFIG_UBI_PART) "\0"                       \
 133         "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"                    \
 134         "load_ubifs=tftp ${kernel_addr} ${ubifs}\0"                     \
 135         "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
 136                 " ${filesize}\0"                                        \
 137         "upd_ubifs=run load_ubifs update_ubifs\0"                       \
 138         "init_ubifs=nand erase.part ubi0;ubi part ${part};"             \
 139                 "ubi create ${vol} 4000000\0"                           \
 140         "netdev=eth0\0"                                                 \
 141         "rootpath=/opt/eldk-4.2/arm\0"                                  \
 142         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 143                 "nfsroot=${serverip}:${rootpath}\0"                     \
 144         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 145         "boot_part=0\0"                                                 \
 146         "altbootcmd=if test $boot_part -eq 0;then "                     \
 147                         "echo Switching to partition 1!;"               \
 148                         "setenv boot_part 1;"                           \
 149                 "else; "                                                \
 150                         "echo Switching to partition 0!;"               \
 151                         "setenv boot_part 0;"                           \
 152                 "fi;"                                                   \
 153                 "saveenv;boot\0"                                        \
 154         "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} "               \
 155                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
 156         "kernel=" CONFIG_HOSTNAME "/uImage\0"           \
 157         "kernel_fs=/boot/uImage \0"                                     \
 158         "kernel_addr=1000000\0"                                         \
 159         "dtb=" CONFIG_HOSTNAME "/"                              \
 160                 CONFIG_HOSTNAME ".dtb\0"                        \
 161         "dtb_fs=/boot/" CONFIG_HOSTNAME ".dtb\0"                \
 162         "dtb_addr=1800000\0"                                            \
 163         "load_kernel=tftp ${kernel_addr} ${kernel}\0"                   \
 164         "load_dtb=tftp ${dtb_addr} ${dtb}\0"                            \
 165         "addip=setenv bootargs ${bootargs} "                            \
 166                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 167                 ":${hostname}:${netdev}:off panic=1\0"                  \
 168         "addcon=setenv bootargs ${bootargs} console=ttyAMA0,"           \
 169                 "${baudrate}\0"                                         \
 170         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 171         "net_nfs=run load_dtb load_kernel; "                            \
 172                 "run nfsargs addip addcon addmtd addmisc;"              \
 173                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 174         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0"                                    \
 175         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0"                                \
 176         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"         \
 177                 " addcon addmisc addmtd;"                               \
 178                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 179         "ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0"  \
 180         "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"             \
 181                 "ubifsload ${dtb_addr} ${dtb_fs};\0"                    \
 182         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
 183                 "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0"   \
 184         "bootcmd=run nand_ubifs\0"                                      \
 185         "\0"
 186
 187 /* Physical Memory Map */
 188 #define CONFIG_NR_DRAM_BANKS                    1
 189 #define PHYS_SDRAM_1                            0x00000000
 190 #define PHYS_SDRAM_1_MAXSIZE                    0x40000000
 191
 192 #define CONFIG_SYS_SDRAM_BASE                   PHYS_SDRAM_1
 193 #define CONFIG_SRAM_BASE                        0xd2800000
 194 /* Preserve the last 2 lwords for the boot-counter */
 195 #define CONFIG_SRAM_SIZE                        ((8 << 10) - 0x8)
 196 #define CONFIG_SYS_INIT_RAM_ADDR                CONFIG_SRAM_BASE
 197 #define CONFIG_SYS_INIT_RAM_SIZE                CONFIG_SRAM_SIZE
 198
 199 #define CONFIG_SYS_INIT_SP_OFFSET               \
 200         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 201
 202 #define CONFIG_SYS_INIT_SP_ADDR                 \
 203         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 204
 205 /*
 206  * SPL related defines
 207  */
 208 #define CONFIG_SPL_TEXT_BASE            0xd2800b00
 209 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SRAM_SIZE - 0xb00)
 210 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
 211
 212 /*
 213  * Please select/define only one of the following
 214  * Each definition corresponds to a supported DDR chip.
 215  * DDR configuration is based on the following selection
 216  */
 217 #define CONFIG_DDR_MT47H64M16           1
 218 #define CONFIG_DDR_MT47H32M16           0
 219 #define CONFIG_DDR_MT47H128M8           0
 220
 221 /*
 222  * Synchronous/Asynchronous operation of DDR
 223  *
 224  * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation
 225  * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation
 226  * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation
 227  */
 228 #define CONFIG_DDR_2HCLK                1
 229 #define CONFIG_DDR_HCLK                 0
 230 #define CONFIG_DDR_PLL2                 0
 231
 232 /*
 233  * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported
 234  * or not. Modify/Add to only these macros to define new boot types
 235  */
 236 #define USB_BOOT_SUPPORTED              0
 237 #define PCIE_BOOT_SUPPORTED             0
 238 #define SNOR_BOOT_SUPPORTED             1
 239 #define NAND_BOOT_SUPPORTED             1
 240 #define PNOR_BOOT_SUPPORTED             0
 241 #define TFTP_BOOT_SUPPORTED             0
 242 #define UART_BOOT_SUPPORTED             0
 243 #define SPI_BOOT_SUPPORTED              0
 244 #define I2C_BOOT_SUPPORTED              0
 245 #define MMC_BOOT_SUPPORTED              0
 246
 247 #endif  /* __CONFIG_H */