include/configs/x600.h

   1 /*
   2  * (C) Copyright 2009
   3  * Vipin Kumar, STMicroelectronics, <vipin.kumar@st.com>
   4  *
   5  * Copyright (C) 2012, 2015 Stefan Roese <sr@denx.de>
   6  *
   7  * SPDX-License-Identifier:     GPL-2.0+
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /*
  14  * High Level Configuration Options
  15  * (easy to change)
  16  */
  17 #define CONFIG_SPEAR600                         /* SPEAr600 SoC */
  18 #define CONFIG_X600                             /* on X600 board */
  19
  20 #include <asm/arch/hardware.h>
  21
  22 /* Timer, HZ specific defines */
  23 #define CONFIG_SYS_HZ_CLOCK                     8300000
  24
  25 #define CONFIG_SYS_TEXT_BASE                    0x00800040
  26 #define CONFIG_SYS_FLASH_BASE                   0xf8000000
  27 /* Reserve 8KiB for SPL */
  28 #define CONFIG_SPL_PAD_TO                       8192    /* decimal for 'dd' */
  29 #define CONFIG_SYS_SPL_LEN                      CONFIG_SPL_PAD_TO
  30 #define CONFIG_SYS_UBOOT_BASE                   (CONFIG_SYS_FLASH_BASE + \
  31                                                  CONFIG_SYS_SPL_LEN)
  32 #define CONFIG_SYS_UBOOT_START                  CONFIG_SYS_TEXT_BASE
  33 #define CONFIG_SYS_MONITOR_BASE                 CONFIG_SYS_FLASH_BASE
  34 #define CONFIG_SYS_MONITOR_LEN                  0x60000
  35
  36 /* Serial Configuration (PL011) */
  37 #define CONFIG_SYS_SERIAL0                      0xD0000000
  38 #define CONFIG_SYS_SERIAL1                      0xD0080000
  39 #define CONFIG_PL01x_PORTS                      { (void *)CONFIG_SYS_SERIAL0, \
  40                                                 (void *)CONFIG_SYS_SERIAL1 }
  41 #define CONFIG_PL011_SERIAL
  42 #define CONFIG_PL011_CLOCK                      (48 * 1000 * 1000)
  43 #define CONFIG_CONS_INDEX                       0
  44 #define CONFIG_SYS_BAUDRATE_TABLE               { 9600, 19200, 38400, \
  45                                                   57600, 115200 }
  46 #define CONFIG_SYS_LOADS_BAUD_CHANGE
  47
  48 /* NOR FLASH config options */
  49 #define CONFIG_ST_SMI
  50 #define CONFIG_SYS_MAX_FLASH_BANKS              1
  51 #define CONFIG_SYS_FLASH_BANK_SIZE              0x01000000
  52 #define CONFIG_SYS_FLASH_ADDR_BASE              { CONFIG_SYS_FLASH_BASE }
  53 #define CONFIG_SYS_MAX_FLASH_SECT               128
  54 #define CONFIG_SYS_FLASH_EMPTY_INFO
  55 #define CONFIG_SYS_FLASH_ERASE_TOUT             (3 * CONFIG_SYS_HZ)
  56 #define CONFIG_SYS_FLASH_WRITE_TOUT             (3 * CONFIG_SYS_HZ)
  57
  58 /* NAND FLASH config options */
  59 #define CONFIG_NAND_FSMC
  60 #define CONFIG_SYS_NAND_SELF_INIT
  61 #define CONFIG_SYS_MAX_NAND_DEVICE              1
  62 #define CONFIG_SYS_NAND_BASE                    CONFIG_FSMC_NAND_BASE
  63 #define CONFIG_MTD_ECC_SOFT
  64 #define CONFIG_SYS_FSMC_NAND_8BIT
  65 #define CONFIG_SYS_NAND_ONFI_DETECTION
  66 #define CONFIG_NAND_ECC_BCH
  67
  68 /* UBI/UBI config options */
  69 #define CONFIG_MTD_DEVICE
  70 #define CONFIG_MTD_PARTITIONS
  71
  72 /* Ethernet config options */
  73 #define CONFIG_MII
  74 #define CONFIG_PHY_RESET_DELAY                  10000           /* in usec */
  75 #define CONFIG_PHY_ADDR         0       /* PHY address */
  76
  77 #define CONFIG_SPEAR_GPIO
  78
  79 /* I2C config options */
  80 #define CONFIG_SYS_I2C
  81 #define CONFIG_SYS_I2C_BASE                     0xD0200000
  82 #define CONFIG_SYS_I2C_SPEED                    400000
  83 #define CONFIG_SYS_I2C_SLAVE                    0x02
  84 #define CONFIG_I2C_CHIPADDRESS                  0x50
  85
  86 #define CONFIG_RTC_M41T62       1
  87 #define CONFIG_SYS_I2C_RTC_ADDR 0x68
  88
  89 /* FPGA config options */
  90 #define CONFIG_FPGA
  91 #define CONFIG_FPGA_XILINX
  92 #define CONFIG_FPGA_SPARTAN3
  93 #define CONFIG_FPGA_COUNT       1
  94
  95 /* USB EHCI options */
  96 #define CONFIG_USB_EHCI_SPEAR
  97 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
  98
  99 /* Filesystem support (for USB key) */
 100 #define CONFIG_SUPPORT_VFAT
 101
 102
 103 /*
 104  * U-Boot Environment placing definitions.
 105  */
 106 #define CONFIG_ENV_SECT_SIZE                    0x00010000
 107 #define CONFIG_ENV_ADDR                         (CONFIG_SYS_MONITOR_BASE + \
 108                                                  CONFIG_SYS_MONITOR_LEN)
 109 #define CONFIG_ENV_SIZE                         0x02000
 110 #define CONFIG_ENV_ADDR_REDUND                  (CONFIG_ENV_ADDR + \
 111                                                  CONFIG_ENV_SECT_SIZE)
 112 #define CONFIG_ENV_SIZE_REDUND                  (CONFIG_ENV_SIZE)
 113
 114 /* Miscellaneous configurable options */
 115 #define CONFIG_ARCH_CPU_INIT
 116 #define CONFIG_BOOT_PARAMS_ADDR                 0x00000100
 117 #define CONFIG_CMDLINE_TAG
 118 #define CONFIG_SETUP_MEMORY_TAGS
 119 #define CONFIG_MISC_INIT_R
 120 #define CONFIG_MX_CYCLIC                /* enable mdc/mwc commands      */
 121
 122 #define CONFIG_SYS_MEMTEST_START                0x00800000
 123 #define CONFIG_SYS_MEMTEST_END                  0x04000000
 124 #define CONFIG_SYS_MALLOC_LEN                   (8 << 20)
 125 #define CONFIG_SYS_LONGHELP
 126 #define CONFIG_CMDLINE_EDITING
 127 #define CONFIG_AUTO_COMPLETE
 128 #define CONFIG_SYS_BARGSIZE                     CONFIG_SYS_CBSIZE
 129 #define CONFIG_SYS_LOAD_ADDR                    0x00800000
 130
 131 /* Use last 2 lwords in internal SRAM for bootcounter */
 132 #define CONFIG_BOOTCOUNT_LIMIT
 133 #define CONFIG_SYS_BOOTCOUNT_ADDR               (CONFIG_SRAM_BASE + \
 134                                                  CONFIG_SRAM_SIZE)
 135
 136 #define CONFIG_HOSTNAME                         x600
 137 #define CONFIG_UBI_PART                         ubi0
 138 #define CONFIG_UBIFS_VOLUME                     rootfs
 139
 140 #define MTDIDS_DEFAULT          "nand0=nand"
 141 #define MTDPARTS_DEFAULT        "mtdparts=nand:64M(ubi0),64M(ubi1)"
 142
 143 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 144         "u-boot_addr=1000000\0"                                         \
 145         "u-boot=" __stringify(CONFIG_HOSTNAME) "/u-boot.spr\0"          \
 146         "load=tftp ${u-boot_addr} ${u-boot}\0"                          \
 147         "update=protect off " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 148                 " +${filesize};"                                        \
 149                 "erase " __stringify(CONFIG_SYS_MONITOR_BASE) " +${filesize};" \
 150                 "cp.b ${u-boot_addr} " __stringify(CONFIG_SYS_MONITOR_BASE) \
 151                 " ${filesize};"                                         \
 152                 "protect on " __stringify(CONFIG_SYS_MONITOR_BASE)      \
 153                 " +${filesize}\0"                                       \
 154         "upd=run load update\0"                                         \
 155         "ubifs=" __stringify(CONFIG_HOSTNAME) "/ubifs.img\0"            \
 156         "part=" __stringify(CONFIG_UBI_PART) "\0"                       \
 157         "vol=" __stringify(CONFIG_UBIFS_VOLUME) "\0"                    \
 158         "load_ubifs=tftp ${kernel_addr} ${ubifs}\0"                     \
 159         "update_ubifs=ubi part ${part};ubi write ${kernel_addr} ${vol}" \
 160                 " ${filesize}\0"                                        \
 161         "upd_ubifs=run load_ubifs update_ubifs\0"                       \
 162         "init_ubifs=nand erase.part ubi0;ubi part ${part};"             \
 163                 "ubi create ${vol} 4000000\0"                           \
 164         "netdev=eth0\0"                                                 \
 165         "rootpath=/opt/eldk-4.2/arm\0"                                  \
 166         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 167                 "nfsroot=${serverip}:${rootpath}\0"                     \
 168         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 169         "boot_part=0\0"                                                 \
 170         "altbootcmd=if test $boot_part -eq 0;then "                     \
 171                         "echo Switching to partition 1!;"               \
 172                         "setenv boot_part 1;"                           \
 173                 "else; "                                                \
 174                         "echo Switching to partition 0!;"               \
 175                         "setenv boot_part 0;"                           \
 176                 "fi;"                                                   \
 177                 "saveenv;boot\0"                                        \
 178         "ubifsargs=set bootargs ubi.mtd=ubi${boot_part} "               \
 179                 "root=ubi0:rootfs rootfstype=ubifs\0"                   \
 180         "kernel=" __stringify(CONFIG_HOSTNAME) "/uImage\0"              \
 181         "kernel_fs=/boot/uImage \0"                                     \
 182         "kernel_addr=1000000\0"                                         \
 183         "dtb=" __stringify(CONFIG_HOSTNAME) "/"                         \
 184                 __stringify(CONFIG_HOSTNAME) ".dtb\0"                   \
 185         "dtb_fs=/boot/" __stringify(CONFIG_HOSTNAME) ".dtb\0"           \
 186         "dtb_addr=1800000\0"                                            \
 187         "load_kernel=tftp ${kernel_addr} ${kernel}\0"                   \
 188         "load_dtb=tftp ${dtb_addr} ${dtb}\0"                            \
 189         "addip=setenv bootargs ${bootargs} "                            \
 190                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 191                 ":${hostname}:${netdev}:off panic=1\0"                  \
 192         "addcon=setenv bootargs ${bootargs} console=ttyAMA0,"           \
 193                 "${baudrate}\0"                                         \
 194         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 195         "net_nfs=run load_dtb load_kernel; "                            \
 196                 "run nfsargs addip addcon addmtd addmisc;"              \
 197                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 198         "mtdids=" MTDIDS_DEFAULT "\0"                                   \
 199         "mtdparts=" MTDPARTS_DEFAULT "\0"                               \
 200         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip"         \
 201                 " addcon addmisc addmtd;"                               \
 202                 "bootm ${kernel_addr} - ${dtb_addr}\0"                  \
 203         "ubifs_mount=ubi part ubi${boot_part};ubifsmount ubi:rootfs\0"  \
 204         "ubifs_load=ubifsload ${kernel_addr} ${kernel_fs};"             \
 205                 "ubifsload ${dtb_addr} ${dtb_fs};\0"                    \
 206         "nand_ubifs=run ubifs_mount ubifs_load ubifsargs addip addcon " \
 207                 "addmtd addmisc;bootm ${kernel_addr} - ${dtb_addr}\0"   \
 208         "bootcmd=run nand_ubifs\0"                                      \
 209         "\0"
 210
 211 /* Physical Memory Map */
 212 #define CONFIG_NR_DRAM_BANKS                    1
 213 #define PHYS_SDRAM_1                            0x00000000
 214 #define PHYS_SDRAM_1_MAXSIZE                    0x40000000
 215
 216 #define CONFIG_SYS_SDRAM_BASE                   PHYS_SDRAM_1
 217 #define CONFIG_SRAM_BASE                        0xd2800000
 218 /* Preserve the last 2 lwords for the boot-counter */
 219 #define CONFIG_SRAM_SIZE                        ((8 << 10) - 0x8)
 220 #define CONFIG_SYS_INIT_RAM_ADDR                CONFIG_SRAM_BASE
 221 #define CONFIG_SYS_INIT_RAM_SIZE                CONFIG_SRAM_SIZE
 222
 223 #define CONFIG_SYS_INIT_SP_OFFSET               \
 224         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 225
 226 #define CONFIG_SYS_INIT_SP_ADDR                 \
 227         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 228
 229 /*
 230  * SPL related defines
 231  */
 232 #define CONFIG_SPL_TEXT_BASE            0xd2800b00
 233 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SRAM_SIZE - 0xb00)
 234 #define CONFIG_SPL_START_S_PATH "arch/arm/cpu/arm926ejs/spear"
 235
 236 #define CONFIG_SPL_FRAMEWORK
 237
 238 /*
 239  * Please select/define only one of the following
 240  * Each definition corresponds to a supported DDR chip.
 241  * DDR configuration is based on the following selection
 242  */
 243 #define CONFIG_DDR_MT47H64M16           1
 244 #define CONFIG_DDR_MT47H32M16           0
 245 #define CONFIG_DDR_MT47H128M8           0
 246
 247 /*
 248  * Synchronous/Asynchronous operation of DDR
 249  *
 250  * Select CONFIG_DDR_2HCLK for DDR clk = 333MHz, synchronous operation
 251  * Select CONFIG_DDR_HCLK for DDR clk = 166MHz, synchronous operation
 252  * Select CONFIG_DDR_PLL2 for DDR clk = PLL2, asynchronous operation
 253  */
 254 #define CONFIG_DDR_2HCLK                1
 255 #define CONFIG_DDR_HCLK                 0
 256 #define CONFIG_DDR_PLL2                 0
 257
 258 /*
 259  * xxx_BOOT_SUPPORTED macro defines whether a booting type is supported
 260  * or not. Modify/Add to only these macros to define new boot types
 261  */
 262 #define USB_BOOT_SUPPORTED              0
 263 #define PCIE_BOOT_SUPPORTED             0
 264 #define SNOR_BOOT_SUPPORTED             1
 265 #define NAND_BOOT_SUPPORTED             1
 266 #define PNOR_BOOT_SUPPORTED             0
 267 #define TFTP_BOOT_SUPPORTED             0
 268 #define UART_BOOT_SUPPORTED             0
 269 #define SPI_BOOT_SUPPORTED              0
 270 #define I2C_BOOT_SUPPORTED              0
 271 #define MMC_BOOT_SUPPORTED              0
 272
 273 #endif  /* __CONFIG_H */