include/configs/vf610twr.h

   1 /*
   2  * Copyright 2013 Freescale Semiconductor, Inc.
   3  *
   4  * Configuration settings for the Freescale Vybrid vf610twr board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include <asm/arch/imx-regs.h>
  13
  14 #define CONFIG_VF610
  15
  16 #define CONFIG_DISPLAY_CPUINFO
  17 #define CONFIG_DISPLAY_BOARDINFO
  18 #define CONFIG_SYS_FSL_CLK
  19
  20 #define CONFIG_MACH_TYPE                4146
  21
  22 #define CONFIG_SKIP_LOWLEVEL_INIT
  23
  24 /* Enable passing of ATAGs */
  25 #define CONFIG_CMDLINE_TAG
  26
  27 #define CONFIG_CMD_FUSE
  28 #ifdef CONFIG_CMD_FUSE
  29 #define CONFIG_MXC_OCOTP
  30 #endif
  31
  32 /* Size of malloc() pool */
  33 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
  34
  35 #define CONFIG_BOARD_EARLY_INIT_F
  36
  37 /* Allow to overwrite serial and ethaddr */
  38 #define CONFIG_ENV_OVERWRITE
  39 #define CONFIG_BAUDRATE                 115200
  40
  41 /* NAND support */
  42 #define CONFIG_CMD_NAND
  43 #define CONFIG_CMD_NAND_TRIMFFS
  44 #define CONFIG_SYS_NAND_ONFI_DETECTION
  45
  46 #ifdef CONFIG_CMD_NAND
  47 #define CONFIG_USE_ARCH_MEMCPY
  48 #define CONFIG_SYS_MAX_NAND_DEVICE      1
  49 #define CONFIG_SYS_NAND_BASE            NFC_BASE_ADDR
  50
  51 /* UBI */
  52 #define CONFIG_CMD_UBI
  53 #define CONFIG_CMD_UBIFS
  54 #define CONFIG_RBTREE
  55 #define CONFIG_LZO
  56
  57 /* Dynamic MTD partition support */
  58 #define CONFIG_CMD_MTDPARTS
  59 #define CONFIG_MTD_PARTITIONS
  60 #define CONFIG_MTD_DEVICE
  61 #define MTDIDS_DEFAULT                  "nand0=fsl_nfc"
  62 #define MTDPARTS_DEFAULT                "mtdparts=fsl_nfc:"             \
  63                                         "128k(vf-bcb)ro,"               \
  64                                         "1408k(u-boot)ro,"              \
  65                                         "512k(u-boot-env),"             \
  66                                         "4m(kernel),"                   \
  67                                         "512k(fdt),"            \
  68                                         "-(rootfs)"
  69 #endif
  70
  71 #define CONFIG_MMC
  72 #define CONFIG_FSL_ESDHC
  73 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  74 #define CONFIG_SYS_FSL_ESDHC_NUM        1
  75
  76 #define CONFIG_SYS_FSL_ERRATUM_ESDHC111
  77
  78 #define CONFIG_GENERIC_MMC
  79 #define CONFIG_DOS_PARTITION
  80
  81 #define CONFIG_FEC_MXC
  82 #define CONFIG_MII
  83 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  84 #define CONFIG_FEC_XCV_TYPE             RMII
  85 #define CONFIG_FEC_MXC_PHYADDR          0
  86 #define CONFIG_PHYLIB
  87 #define CONFIG_PHY_MICREL
  88
  89 /* QSPI Configs*/
  90
  91 #ifdef CONFIG_FSL_QSPI
  92 #define FSL_QSPI_FLASH_SIZE             (1 << 24)
  93 #define FSL_QSPI_FLASH_NUM              2
  94 #define CONFIG_SYS_FSL_QSPI_LE
  95 #endif
  96
  97 /* I2C Configs */
  98 #define CONFIG_SYS_I2C
  99 #define CONFIG_SYS_I2C_MXC
 100 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 1 */
 101 #define CONFIG_SYS_I2C_MXC_I2C2         /* enable I2C bus 2 */
 102 #define CONFIG_SYS_SPD_BUS_NUM          0
 103
 104
 105 #define CONFIG_SYS_LOAD_ADDR            0x82000000
 106
 107 /* We boot from the gfxRAM area of the OCRAM. */
 108 #define CONFIG_SYS_TEXT_BASE            0x3f408000
 109 #define CONFIG_BOARD_SIZE_LIMIT         524288
 110
 111 /*
 112  * We do have 128MB of memory on the Vybrid Tower board. Leave the last
 113  * 16MB alone to avoid conflicts with Cortex-M4 firmwares running from
 114  * DDR3. Hence, limit the memory range for image processing to 112MB
 115  * using bootm_size. All of the following must be within this range.
 116  * We have the default load at 32MB into DDR (for the kernel), FDT at
 117  * 64MB and the ramdisk 512KB above that (allowing for hopefully never
 118  * seen large trees). This allows a reasonable split between ramdisk
 119  * and kernel size, where the ram disk can be a bit larger.
 120  */
 121 #define MEM_LAYOUT_ENV_SETTINGS \
 122         "bootm_size=0x07000000\0" \
 123         "loadaddr=0x82000000\0" \
 124         "kernel_addr_r=0x82000000\0" \
 125         "fdt_addr=0x84000000\0" \
 126         "fdt_addr_r=0x84000000\0" \
 127         "rdaddr=0x84080000\0" \
 128         "ramdisk_addr_r=0x84080000\0"
 129
 130 #define CONFIG_EXTRA_ENV_SETTINGS \
 131         MEM_LAYOUT_ENV_SETTINGS \
 132         "script=boot.scr\0" \
 133         "image=zImage\0" \
 134         "console=ttyLP1\0" \
 135         "fdt_file=vf610-twr.dtb\0" \
 136         "boot_fdt=try\0" \
 137         "ip_dyn=yes\0" \
 138         "mmcdev=" __stringify(CONFIG_SYS_MMC_ENV_DEV) "\0" \
 139         "mmcpart=1\0" \
 140         "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \
 141         "update_sd_firmware_filename=u-boot.imx\0" \
 142         "update_sd_firmware=" \
 143                 "if test ${ip_dyn} = yes; then " \
 144                         "setenv get_cmd dhcp; " \
 145                 "else " \
 146                         "setenv get_cmd tftp; " \
 147                 "fi; " \
 148                 "if mmc dev ${mmcdev}; then "   \
 149                         "if ${get_cmd} ${update_sd_firmware_filename}; then " \
 150                                 "setexpr fw_sz ${filesize} / 0x200; " \
 151                                 "setexpr fw_sz ${fw_sz} + 1; "  \
 152                                 "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
 153                         "fi; "  \
 154                 "fi\0" \
 155         "mmcargs=setenv bootargs console=${console},${baudrate} " \
 156                 "root=${mmcroot}\0" \
 157         "loadbootscript=" \
 158                 "fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script};\0" \
 159         "bootscript=echo Running bootscript from mmc ...; " \
 160                 "source\0" \
 161         "loadimage=fatload mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image}\0" \
 162         "loadfdt=fatload mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdt_file}\0" \
 163         "mmcboot=echo Booting from mmc ...; " \
 164                 "run mmcargs; " \
 165                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 166                         "if run loadfdt; then " \
 167                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 168                         "else " \
 169                                 "if test ${boot_fdt} = try; then " \
 170                                         "bootz; " \
 171                                 "else " \
 172                                         "echo WARN: Cannot load the DT; " \
 173                                 "fi; " \
 174                         "fi; " \
 175                 "else " \
 176                         "bootz; " \
 177                 "fi;\0" \
 178         "netargs=setenv bootargs console=${console},${baudrate} " \
 179                 "root=/dev/nfs " \
 180         "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
 181                 "netboot=echo Booting from net ...; " \
 182                 "run netargs; " \
 183                 "if test ${ip_dyn} = yes; then " \
 184                         "setenv get_cmd dhcp; " \
 185                 "else " \
 186                         "setenv get_cmd tftp; " \
 187                 "fi; " \
 188                 "${get_cmd} ${image}; " \
 189                 "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
 190                         "if ${get_cmd} ${fdt_addr} ${fdt_file}; then " \
 191                                 "bootz ${loadaddr} - ${fdt_addr}; " \
 192                         "else " \
 193                                 "if test ${boot_fdt} = try; then " \
 194                                         "bootz; " \
 195                                 "else " \
 196                                         "echo WARN: Cannot load the DT; " \
 197                                 "fi; " \
 198                         "fi; " \
 199                 "else " \
 200                         "bootz; " \
 201                 "fi;\0"
 202
 203 #define CONFIG_BOOTCOMMAND \
 204            "mmc dev ${mmcdev}; if mmc rescan; then " \
 205                    "if run loadbootscript; then " \
 206                            "run bootscript; " \
 207                    "else " \
 208                            "if run loadimage; then " \
 209                                    "run mmcboot; " \
 210                            "else run netboot; " \
 211                            "fi; " \
 212                    "fi; " \
 213            "else run netboot; fi"
 214
 215 /* Miscellaneous configurable options */
 216 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 217 #undef CONFIG_AUTO_COMPLETE
 218 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 219 #define CONFIG_SYS_PBSIZE               \
 220                         (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
 221 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 222 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 223
 224 #define CONFIG_SYS_MEMTEST_START        0x80010000
 225 #define CONFIG_SYS_MEMTEST_END          0x87C00000
 226
 227 /*
 228  * Stack sizes
 229  * The stack sizes are set up in start.S using the settings below
 230  */
 231 #define CONFIG_STACKSIZE                (128 * 1024)    /* regular stack */
 232
 233 /* Physical memory map */
 234 #define CONFIG_NR_DRAM_BANKS            1
 235 #define PHYS_SDRAM                      (0x80000000)
 236 #define PHYS_SDRAM_SIZE                 (128 * 1024 * 1024)
 237
 238 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
 239 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
 240 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
 241
 242 #define CONFIG_SYS_INIT_SP_OFFSET \
 243         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
 244 #define CONFIG_SYS_INIT_SP_ADDR \
 245         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
 246
 247 /* FLASH and environment organization */
 248 #define CONFIG_SYS_NO_FLASH
 249
 250 #ifdef CONFIG_ENV_IS_IN_MMC
 251 #define CONFIG_ENV_SIZE                 (8 * 1024)
 252
 253 #define CONFIG_ENV_OFFSET               (12 * 64 * 1024)
 254 #define CONFIG_SYS_MMC_ENV_DEV          0
 255 #endif
 256
 257 #ifdef CONFIG_ENV_IS_IN_NAND
 258 #define CONFIG_ENV_SIZE                 (64 * 2048)
 259 #define CONFIG_ENV_SECT_SIZE            (64 * 2048)
 260 #define CONFIG_ENV_RANGE                (512 * 1024)
 261 #define CONFIG_ENV_OFFSET               0x180000
 262 #endif
 263
 264 #endif