include/configs/vexpress_aemv8a.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Configuration for Versatile Express. Parts were derived from other ARM
   4  *   configurations.
   5  */
   6
   7 #ifndef __VEXPRESS_AEMV8A_H
   8 #define __VEXPRESS_AEMV8A_H
   9
  10 #define CONFIG_REMAKE_ELF
  11
  12 /* Link Definitions */
  13 #ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
  14 /* ATF loads u-boot here for BASE_FVP model */
  15 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
  16 #elif CONFIG_TARGET_VEXPRESS64_JUNO
  17 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  18 #endif
  19
  20 #define CONFIG_SYS_BOOTM_LEN (64 << 20)      /* Increase max gunzip size */
  21
  22 /* CS register bases for the original memory map. */
  23 #define V2M_PA_CS0                      0x00000000
  24 #define V2M_PA_CS1                      0x14000000
  25 #define V2M_PA_CS2                      0x18000000
  26 #define V2M_PA_CS3                      0x1c000000
  27 #define V2M_PA_CS4                      0x0c000000
  28 #define V2M_PA_CS5                      0x10000000
  29
  30 #define V2M_PERIPH_OFFSET(x)            (x << 16)
  31 #define V2M_SYSREGS                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
  32 #define V2M_SYSCTL                      (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
  33 #define V2M_SERIAL_BUS_PCI              (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
  34
  35 #define V2M_BASE                        0x80000000
  36
  37 /* Common peripherals relative to CS7. */
  38 #define V2M_AACI                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
  39 #define V2M_MMCI                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
  40 #define V2M_KMI0                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
  41 #define V2M_KMI1                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
  42
  43 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
  44 #define V2M_UART0                       0x7ff80000
  45 #define V2M_UART1                       0x7ff70000
  46 #else /* Not Juno */
  47 #define V2M_UART0                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
  48 #define V2M_UART1                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
  49 #define V2M_UART2                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
  50 #define V2M_UART3                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
  51 #endif
  52
  53 #define V2M_WDT                         (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
  54
  55 #define V2M_TIMER01                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
  56 #define V2M_TIMER23                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
  57
  58 #define V2M_SERIAL_BUS_DVI              (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
  59 #define V2M_RTC                         (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
  60
  61 #define V2M_CF                          (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
  62
  63 #define V2M_CLCD                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
  64
  65 /* System register offsets. */
  66 #define V2M_SYS_CFGDATA                 (V2M_SYSREGS + 0x0a0)
  67 #define V2M_SYS_CFGCTRL                 (V2M_SYSREGS + 0x0a4)
  68 #define V2M_SYS_CFGSTAT                 (V2M_SYSREGS + 0x0a8)
  69
  70 /* Generic Timer Definitions */
  71 #define COUNTER_FREQUENCY               24000000        /* 24MHz */
  72
  73 /* Generic Interrupt Controller Definitions */
  74 #ifdef CONFIG_GICV3
  75 #define GICD_BASE                       (0x2f000000)
  76 #define GICR_BASE                       (0x2f100000)
  77 #else
  78
  79 #ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
  80 #define GICD_BASE                       (0x2f000000)
  81 #define GICC_BASE                       (0x2c000000)
  82 #elif CONFIG_TARGET_VEXPRESS64_JUNO
  83 #define GICD_BASE                       (0x2C010000)
  84 #define GICC_BASE                       (0x2C02f000)
  85 #endif
  86 #endif /* !CONFIG_GICV3 */
  87
  88 /* Size of malloc() pool */
  89 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (8 << 20))
  90
  91 #ifndef CONFIG_TARGET_VEXPRESS64_JUNO
  92 /* The Vexpress64 simulators use SMSC91C111 */
  93 #define CONFIG_SMC91111                 1
  94 #define CONFIG_SMC91111_BASE            (0x01A000000)
  95 #endif
  96
  97 /* PL011 Serial Configuration */
  98 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
  99 #define CONFIG_PL011_CLOCK              7372800
 100 #else
 101 #define CONFIG_PL011_CLOCK              24000000
 102 #endif
 103
 104 /* BOOTP options */
 105 #define CONFIG_BOOTP_BOOTFILESIZE
 106
 107 /* Miscellaneous configurable options */
 108 #define CONFIG_SYS_LOAD_ADDR            (V2M_BASE + 0x10000000)
 109
 110 /* Physical Memory Map */
 111 #define PHYS_SDRAM_1                    (V2M_BASE)      /* SDRAM Bank #1 */
 112 /* Top 16MB reserved for secure world use */
 113 #define DRAM_SEC_SIZE           0x01000000
 114 #define PHYS_SDRAM_1_SIZE       0x80000000 - DRAM_SEC_SIZE
 115 #define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM_1
 116
 117 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 118 #define PHYS_SDRAM_2                    (0x880000000)
 119 #define PHYS_SDRAM_2_SIZE               0x180000000
 120 #endif
 121
 122 /* Enable memtest */
 123
 124 /* Initial environment variables */
 125 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 126 /*
 127  * Defines where the kernel and FDT exist in NOR flash and where it will
 128  * be copied into DRAM
 129  */
 130 #define CONFIG_EXTRA_ENV_SETTINGS       \
 131                                 "kernel_name=norkern\0" \
 132                                 "kernel_alt_name=Image\0"       \
 133                                 "kernel_addr_r=0x80080000\0" \
 134                                 "ramdisk_name=ramdisk.img\0"    \
 135                                 "ramdisk_addr_r=0x88000000\0"   \
 136                                 "fdtfile=board.dtb\0" \
 137                                 "fdt_alt_name=juno\0" \
 138                                 "fdt_addr_r=0x80000000\0" \
 139
 140 #ifndef CONFIG_BOOTCOMMAND
 141 /* Copy the kernel and FDT to DRAM memory and boot */
 142 #define CONFIG_BOOTCOMMAND      "afs load ${kernel_name} ${kernel_addr_r} ;"\
 143                                 "if test $? -eq 1; then "\
 144                                 "  echo Loading ${kernel_alt_name} instead of "\
 145                                 "${kernel_name}; "\
 146                                 "  afs load ${kernel_alt_name} ${kernel_addr_r};"\
 147                                 "fi ; "\
 148                                 "afs load ${fdtfile} ${fdt_addr_r} ;"\
 149                                 "if test $? -eq 1; then "\
 150                                 "  echo Loading ${fdt_alt_name} instead of "\
 151                                 "${fdtfile}; "\
 152                                 "  afs load ${fdt_alt_name} ${fdt_addr_r}; "\
 153                                 "fi ; "\
 154                                 "fdt addr ${fdt_addr_r}; fdt resize; " \
 155                                 "if afs load  ${ramdisk_name} ${ramdisk_addr_r} ; "\
 156                                 "then "\
 157                                 "  setenv ramdisk_param ${ramdisk_addr_r}; "\
 158                                 "  else setenv ramdisk_param -; "\
 159                                 "fi ; " \
 160                                 "booti ${kernel_addr_r} ${ramdisk_param} ${fdt_addr_r}"
 161 #endif
 162
 163
 164 #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
 165 #define CONFIG_EXTRA_ENV_SETTINGS       \
 166                                 "kernel_name=Image\0"           \
 167                                 "kernel_addr=0x80080000\0"      \
 168                                 "initrd_name=ramdisk.img\0"     \
 169                                 "initrd_addr=0x88000000\0"      \
 170                                 "fdtfile=devtree.dtb\0"         \
 171                                 "fdt_addr=0x83000000\0"         \
 172                                 "boot_name=boot.img\0"          \
 173                                 "boot_addr=0x8007f800\0"
 174
 175 #ifndef CONFIG_BOOTCOMMAND
 176 #define CONFIG_BOOTCOMMAND      "if smhload ${boot_name} ${boot_addr}; then " \
 177                                 "  set bootargs; " \
 178                                 "  abootimg addr ${boot_addr}; " \
 179                                 "  abootimg get dtb --index=0 fdt_addr; " \
 180                                 "  bootm ${boot_addr} ${boot_addr} " \
 181                                 "  ${fdt_addr}; " \
 182                                 "else; " \
 183                                 "  set fdt_high 0xffffffffffffffff; " \
 184                                 "  set initrd_high 0xffffffffffffffff; " \
 185                                 "  smhload ${kernel_name} ${kernel_addr}; " \
 186                                 "  smhload ${fdtfile} ${fdt_addr}; " \
 187                                 "  smhload ${initrd_name} ${initrd_addr} "\
 188                                 "  initrd_end; " \
 189                                 "  fdt addr ${fdt_addr}; fdt resize; " \
 190                                 "  fdt chosen ${initrd_addr} ${initrd_end}; " \
 191                                 "  booti $kernel_addr - $fdt_addr; " \
 192                                 "fi"
 193 #endif
 194 #endif
 195
 196 /* Monitor Command Prompt */
 197 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 198 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 199
 200 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 201 #define CONFIG_SYS_FLASH_BASE           0x08000000
 202 /* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
 203 #define CONFIG_SYS_MAX_FLASH_SECT       259
 204 /* Store environment at top of flash in the same location as blank.img */
 205 /* in the Juno firmware. */
 206 #else
 207 #define CONFIG_SYS_FLASH_BASE           0x0C000000
 208 /* 256 x 256KiB sectors */
 209 #define CONFIG_SYS_MAX_FLASH_SECT       256
 210 /* Store environment at top of flash */
 211 #endif
 212
 213 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_32BIT
 214 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 215
 216 #ifdef CONFIG_USB_EHCI_HCD
 217 #define CONFIG_USB_OHCI_NEW
 218 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 1
 219 #endif
 220
 221 #define CONFIG_SYS_FLASH_EMPTY_INFO     /* flinfo indicates empty blocks */
 222 #define FLASH_MAX_SECTOR_SIZE           0x00040000
 223
 224 #endif /* __VEXPRESS_AEMV8A_H */