include/configs/vexpress_aemv8a.h

   1 /*
   2  * Configuration for Versatile Express. Parts were derived from other ARM
   3  *   configurations.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 #ifndef __VEXPRESS_AEMV8A_H
   9 #define __VEXPRESS_AEMV8A_H
  10
  11 #ifdef CONFIG_TARGET_VEXPRESS64_BASE_FVP
  12 #ifndef CONFIG_SEMIHOSTING
  13 #error CONFIG_TARGET_VEXPRESS64_BASE_FVP requires CONFIG_SEMIHOSTING
  14 #endif
  15 #define CONFIG_ARMV8_SWITCH_TO_EL1
  16 #endif
  17
  18 #define CONFIG_REMAKE_ELF
  19
  20 #define CONFIG_SUPPORT_RAW_INITRD
  21
  22 /* Cache Definitions */
  23 #define CONFIG_SYS_DCACHE_OFF
  24 #define CONFIG_SYS_ICACHE_OFF
  25
  26 #define CONFIG_IDENT_STRING             " vexpress_aemv8a"
  27 #define CONFIG_BOOTP_VCI_STRING         "U-Boot.armv8.vexpress_aemv8a"
  28
  29 /* Link Definitions */
  30 #if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
  31         defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
  32 /* ATF loads u-boot here for BASE_FVP model */
  33 #define CONFIG_SYS_TEXT_BASE            0x88000000
  34 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x03f00000)
  35 #elif CONFIG_TARGET_VEXPRESS64_JUNO
  36 #define CONFIG_SYS_TEXT_BASE            0xe0000000
  37 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_SDRAM_BASE + 0x7fff0)
  38 #endif
  39
  40 #define CONFIG_SYS_BOOTM_LEN (64 << 20)      /* Increase max gunzip size */
  41
  42 /* CS register bases for the original memory map. */
  43 #define V2M_PA_CS0                      0x00000000
  44 #define V2M_PA_CS1                      0x14000000
  45 #define V2M_PA_CS2                      0x18000000
  46 #define V2M_PA_CS3                      0x1c000000
  47 #define V2M_PA_CS4                      0x0c000000
  48 #define V2M_PA_CS5                      0x10000000
  49
  50 #define V2M_PERIPH_OFFSET(x)            (x << 16)
  51 #define V2M_SYSREGS                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(1))
  52 #define V2M_SYSCTL                      (V2M_PA_CS3 + V2M_PERIPH_OFFSET(2))
  53 #define V2M_SERIAL_BUS_PCI              (V2M_PA_CS3 + V2M_PERIPH_OFFSET(3))
  54
  55 #define V2M_BASE                        0x80000000
  56
  57 /* Common peripherals relative to CS7. */
  58 #define V2M_AACI                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(4))
  59 #define V2M_MMCI                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(5))
  60 #define V2M_KMI0                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(6))
  61 #define V2M_KMI1                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(7))
  62
  63 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
  64 #define V2M_UART0                       0x7ff80000
  65 #define V2M_UART1                       0x7ff70000
  66 #else /* Not Juno */
  67 #define V2M_UART0                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(9))
  68 #define V2M_UART1                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(10))
  69 #define V2M_UART2                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(11))
  70 #define V2M_UART3                       (V2M_PA_CS3 + V2M_PERIPH_OFFSET(12))
  71 #endif
  72
  73 #define V2M_WDT                         (V2M_PA_CS3 + V2M_PERIPH_OFFSET(15))
  74
  75 #define V2M_TIMER01                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(17))
  76 #define V2M_TIMER23                     (V2M_PA_CS3 + V2M_PERIPH_OFFSET(18))
  77
  78 #define V2M_SERIAL_BUS_DVI              (V2M_PA_CS3 + V2M_PERIPH_OFFSET(22))
  79 #define V2M_RTC                         (V2M_PA_CS3 + V2M_PERIPH_OFFSET(23))
  80
  81 #define V2M_CF                          (V2M_PA_CS3 + V2M_PERIPH_OFFSET(26))
  82
  83 #define V2M_CLCD                        (V2M_PA_CS3 + V2M_PERIPH_OFFSET(31))
  84
  85 /* System register offsets. */
  86 #define V2M_SYS_CFGDATA                 (V2M_SYSREGS + 0x0a0)
  87 #define V2M_SYS_CFGCTRL                 (V2M_SYSREGS + 0x0a4)
  88 #define V2M_SYS_CFGSTAT                 (V2M_SYSREGS + 0x0a8)
  89
  90 /* Generic Timer Definitions */
  91 #define COUNTER_FREQUENCY               (0x1800000)     /* 24MHz */
  92
  93 /* Generic Interrupt Controller Definitions */
  94 #ifdef CONFIG_GICV3
  95 #define GICD_BASE                       (0x2f000000)
  96 #define GICR_BASE                       (0x2f100000)
  97 #else
  98
  99 #if defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP) || \
 100         defined(CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM)
 101 #define GICD_BASE                       (0x2f000000)
 102 #define GICC_BASE                       (0x2c000000)
 103 #elif CONFIG_TARGET_VEXPRESS64_JUNO
 104 #define GICD_BASE                       (0x2C010000)
 105 #define GICC_BASE                       (0x2C02f000)
 106 #endif
 107 #endif /* !CONFIG_GICV3 */
 108
 109 /* Size of malloc() pool */
 110 #define CONFIG_SYS_MALLOC_LEN           (CONFIG_ENV_SIZE + (8 << 20))
 111
 112 /* Ethernet Configuration */
 113 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 114 /* The real hardware Versatile express uses SMSC9118 */
 115 #define CONFIG_SMC911X                  1
 116 #define CONFIG_SMC911X_32_BIT           1
 117 #define CONFIG_SMC911X_BASE             (0x018000000)
 118 #else
 119 /* The Vexpress64 simulators use SMSC91C111 */
 120 #define CONFIG_SMC91111                 1
 121 #define CONFIG_SMC91111_BASE            (0x01A000000)
 122 #endif
 123
 124 /* PL011 Serial Configuration */
 125 #define CONFIG_BAUDRATE                 115200
 126 #define CONFIG_CONS_INDEX               0
 127 #define CONFIG_PL01X_SERIAL
 128 #define CONFIG_PL011_SERIAL
 129 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 130 #define CONFIG_PL011_CLOCK              7273800
 131 #else
 132 #define CONFIG_PL011_CLOCK              24000000
 133 #endif
 134
 135 /* Command line configuration */
 136 #define CONFIG_MENU
 137 /*#define CONFIG_MENU_SHOW*/
 138 #define CONFIG_CMD_CACHE
 139 #define CONFIG_CMD_BOOTI
 140 #define CONFIG_CMD_UNZIP
 141 #define CONFIG_CMD_DHCP
 142 #define CONFIG_CMD_PXE
 143 #define CONFIG_CMD_ENV
 144 #define CONFIG_CMD_MII
 145 #define CONFIG_CMD_PING
 146 #define CONFIG_CMD_FAT
 147 #define CONFIG_DOS_PARTITION
 148
 149 /* BOOTP options */
 150 #define CONFIG_BOOTP_BOOTFILESIZE
 151 #define CONFIG_BOOTP_BOOTPATH
 152 #define CONFIG_BOOTP_GATEWAY
 153 #define CONFIG_BOOTP_HOSTNAME
 154 #define CONFIG_BOOTP_PXE
 155 #define CONFIG_BOOTP_PXE_CLIENTARCH     0x100
 156
 157 /* Miscellaneous configurable options */
 158 #define CONFIG_SYS_LOAD_ADDR            (V2M_BASE + 0x10000000)
 159
 160 /* Physical Memory Map */
 161 #define PHYS_SDRAM_1                    (V2M_BASE)      /* SDRAM Bank #1 */
 162 /* Top 16MB reserved for secure world use */
 163 #define DRAM_SEC_SIZE           0x01000000
 164 #define PHYS_SDRAM_1_SIZE       0x80000000 - DRAM_SEC_SIZE
 165 #define CONFIG_SYS_SDRAM_BASE   PHYS_SDRAM_1
 166
 167 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 168 #define CONFIG_NR_DRAM_BANKS            2
 169 #define PHYS_SDRAM_2                    (0x880000000)
 170 #define PHYS_SDRAM_2_SIZE               0x180000000
 171 #else
 172 #define CONFIG_NR_DRAM_BANKS            1
 173 #endif
 174
 175 /* Enable memtest */
 176 #define CONFIG_CMD_MEMTEST
 177 #define CONFIG_SYS_MEMTEST_START        PHYS_SDRAM_1
 178 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_1 + PHYS_SDRAM_1_SIZE)
 179
 180 /* Initial environment variables */
 181 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 182 /*
 183  * Defines where the kernel and FDT exist in NOR flash and where it will
 184  * be copied into DRAM
 185  */
 186 #define CONFIG_EXTRA_ENV_SETTINGS       \
 187                                 "kernel_name=norkern\0" \
 188                                 "kernel_alt_name=Image\0"       \
 189                                 "kernel_addr=0x80080000\0" \
 190                                 "initrd_name=ramdisk.img\0"     \
 191                                 "initrd_addr=0x84000000\0"      \
 192                                 "fdt_name=board.dtb\0" \
 193                                 "fdt_alt_name=juno\0" \
 194                                 "fdt_addr=0x83000000\0" \
 195                                 "fdt_high=0xffffffffffffffff\0" \
 196                                 "initrd_high=0xffffffffffffffff\0" \
 197
 198 /* Assume we boot with root on the first partition of a USB stick */
 199 #define CONFIG_BOOTARGS         "console=ttyAMA0,115200n8 " \
 200                                 "root=/dev/sda2 rw " \
 201                                 "rootwait "\
 202                                 "earlyprintk=pl011,0x7ff80000 debug "\
 203                                 "user_debug=31 "\
 204                                 "androidboot.hardware=juno "\
 205                                 "loglevel=9"
 206
 207 /* Copy the kernel and FDT to DRAM memory and boot */
 208 #define CONFIG_BOOTCOMMAND      "afs load ${kernel_name} ${kernel_addr} ; " \
 209                                 "if test $? -eq 1; then "\
 210                                 "  echo Loading ${kernel_alt_name} instead of "\
 211                                 "${kernel_name}; "\
 212                                 "  afs load ${kernel_alt_name} ${kernel_addr};"\
 213                                 "fi ; "\
 214                                 "afs load  ${fdt_name} ${fdt_addr} ; " \
 215                                 "if test $? -eq 1; then "\
 216                                 "  echo Loading ${fdt_alt_name} instead of "\
 217                                 "${fdt_name}; "\
 218                                 "  afs load ${fdt_alt_name} ${fdt_addr}; "\
 219                                 "fi ; "\
 220                                 "fdt addr ${fdt_addr}; fdt resize; " \
 221                                 "if afs load  ${initrd_name} ${initrd_addr} ; "\
 222                                 "then "\
 223                                 "  setenv initrd_param ${initrd_addr}; "\
 224                                 "  else setenv initrd_param -; "\
 225                                 "fi ; " \
 226                                 "booti ${kernel_addr} ${initrd_param} ${fdt_addr}"
 227
 228 #define CONFIG_BOOTDELAY                1
 229
 230 #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP
 231 #define CONFIG_EXTRA_ENV_SETTINGS       \
 232                                 "kernel_name=Image\0"           \
 233                                 "kernel_addr=0x80080000\0"      \
 234                                 "initrd_name=ramdisk.img\0"     \
 235                                 "initrd_addr=0x88000000\0"      \
 236                                 "fdt_name=devtree.dtb\0"        \
 237                                 "fdt_addr=0x83000000\0"         \
 238                                 "fdt_high=0xffffffffffffffff\0" \
 239                                 "initrd_high=0xffffffffffffffff\0"
 240
 241 #define CONFIG_BOOTARGS         "console=ttyAMA0 earlyprintk=pl011,"\
 242                                 "0x1c090000 debug user_debug=31 "\
 243                                 "loglevel=9"
 244
 245 #define CONFIG_BOOTCOMMAND      "smhload ${kernel_name} ${kernel_addr}; " \
 246                                 "smhload ${fdt_name} ${fdt_addr}; " \
 247                                 "smhload ${initrd_name} ${initrd_addr} "\
 248                                 "initrd_end; " \
 249                                 "fdt addr ${fdt_addr}; fdt resize; " \
 250                                 "fdt chosen ${initrd_addr} ${initrd_end}; " \
 251                                 "booti $kernel_addr - $fdt_addr"
 252
 253 #define CONFIG_BOOTDELAY                1
 254
 255 #elif CONFIG_TARGET_VEXPRESS64_BASE_FVP_DRAM
 256 #define CONFIG_EXTRA_ENV_SETTINGS       \
 257                                 "kernel_addr=0x80080000\0"      \
 258                                 "initrd_addr=0x84000000\0"      \
 259                                 "fdt_addr=0x83000000\0"         \
 260                                 "fdt_high=0xffffffffffffffff\0" \
 261                                 "initrd_high=0xffffffffffffffff\0"
 262
 263 #define CONFIG_BOOTARGS         "console=ttyAMA0 earlyprintk=pl011,"\
 264                                 "0x1c090000 debug user_debug=31 "\
 265                                 "androidboot.hardware=fvpbase "\
 266                                 "root=/dev/vda2 rw "\
 267                                 "rootwait "\
 268                                 "loglevel=9"
 269
 270 #define CONFIG_BOOTCOMMAND      "booti $kernel_addr $initrd_addr $fdt_addr"
 271
 272 #define CONFIG_BOOTDELAY                1
 273
 274 #endif
 275
 276 /* Monitor Command Prompt */
 277 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
 278 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 279                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 280 #define CONFIG_SYS_HUSH_PARSER
 281 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
 282 #define CONFIG_SYS_LONGHELP
 283 #define CONFIG_CMDLINE_EDITING
 284 #define CONFIG_SYS_MAXARGS              64      /* max command args */
 285
 286 #ifdef CONFIG_TARGET_VEXPRESS64_JUNO
 287 #define CONFIG_SYS_FLASH_BASE           0x08000000
 288 /* 255 x 256KiB sectors + 4 x 64KiB sectors at the end = 259 */
 289 #define CONFIG_SYS_MAX_FLASH_SECT       259
 290 /* Store environment at top of flash in the same location as blank.img */
 291 /* in the Juno firmware. */
 292 #define CONFIG_ENV_ADDR                 0x0BFC0000
 293 #define CONFIG_ENV_SECT_SIZE            0x00010000
 294 #else
 295 #define CONFIG_SYS_FLASH_BASE           0x0C000000
 296 /* 256 x 256KiB sectors */
 297 #define CONFIG_SYS_MAX_FLASH_SECT       256
 298 /* Store environment at top of flash */
 299 #define CONFIG_ENV_ADDR                 0x0FFC0000
 300 #define CONFIG_ENV_SECT_SIZE            0x00040000
 301 #endif
 302
 303 #define CONFIG_CMD_ARMFLASH
 304 #define CONFIG_SYS_FLASH_CFI            1
 305 #define CONFIG_FLASH_CFI_DRIVER         1
 306 #define CONFIG_SYS_FLASH_CFI_WIDTH      FLASH_CFI_32BIT
 307 #define CONFIG_SYS_MAX_FLASH_BANKS      1
 308
 309 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE /* use buffered writes */
 310 #define CONFIG_SYS_FLASH_PROTECTION     /* The devices have real protection */
 311 #define CONFIG_SYS_FLASH_EMPTY_INFO     /* flinfo indicates empty blocks */
 312 #define FLASH_MAX_SECTOR_SIZE           0x00040000
 313 #define CONFIG_ENV_SIZE                 CONFIG_ENV_SECT_SIZE
 314 #define CONFIG_ENV_IS_IN_FLASH          1
 315
 316
 317 #endif /* __VEXPRESS_AEMV8A_H */