Convert CONFIG_SPL_LIBGENERIC_SUPPORT to Kconfig
[platform/kernel/u-boot.git] / include / configs / uniphier.h
1 /*
2  * Copyright (C) 2012-2015 Panasonic Corporation
3  * Copyright (C) 2015-2016 Socionext Inc.
4  *   Author: Masahiro Yamada <yamada.masahiro@socionext.com>
5  *
6  * SPDX-License-Identifier:     GPL-2.0+
7  */
8
9 /* U-Boot - Common settings for UniPhier Family */
10
11 #ifndef __CONFIG_UNIPHIER_COMMON_H__
12 #define __CONFIG_UNIPHIER_COMMON_H__
13
14 #define CONFIG_ARMV7_PSCI_1_0
15
16 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS  10
17
18 #define CONFIG_SMC911X
19
20 /* dummy: referenced by examples/standalone/smc911x_eeprom.c */
21 #define CONFIG_SMC911X_BASE     0
22 #define CONFIG_SMC911X_32_BIT
23
24 /*-----------------------------------------------------------------------
25  * MMU and Cache Setting
26  *----------------------------------------------------------------------*/
27
28 /* Comment out the following to enable L1 cache */
29 /* #define CONFIG_SYS_ICACHE_OFF */
30 /* #define CONFIG_SYS_DCACHE_OFF */
31
32 #define CONFIG_DISPLAY_CPUINFO
33 #define CONFIG_DISPLAY_BOARDINFO
34 #define CONFIG_MISC_INIT_F
35 #define CONFIG_BOARD_EARLY_INIT_F
36 #define CONFIG_BOARD_EARLY_INIT_R
37 #define CONFIG_BOARD_LATE_INIT
38
39 #define CONFIG_SYS_MALLOC_LEN           (4 * 1024 * 1024)
40
41 #define CONFIG_TIMESTAMP
42
43 /* FLASH related */
44 #define CONFIG_MTD_DEVICE
45
46 /*
47  * uncomment the following to disable FLASH related code.
48  */
49 /* #define CONFIG_SYS_NO_FLASH */
50
51 #define CONFIG_FLASH_CFI_DRIVER
52 #define CONFIG_SYS_FLASH_CFI
53
54 #define CONFIG_SYS_MAX_FLASH_SECT       256
55 #define CONFIG_SYS_MONITOR_BASE         0
56 #define CONFIG_SYS_MONITOR_LEN          0x00080000      /* 512KB */
57 #define CONFIG_SYS_FLASH_BASE           0
58
59 /*
60  * flash_toggle does not work for out supoort card.
61  * We need to use flash_status_poll.
62  */
63 #define CONFIG_SYS_CFI_FLASH_STATUS_POLL
64
65 #define CONFIG_FLASH_SHOW_PROGRESS      45 /* count down from 45/5: 9..1 */
66
67 #define CONFIG_SYS_MAX_FLASH_BANKS_DETECT 1
68
69 /* serial console configuration */
70 #define CONFIG_BAUDRATE                 115200
71
72 #if !defined(CONFIG_SPL_BUILD) && !defined(CONFIG_ARM64)
73 #define CONFIG_USE_ARCH_MEMSET
74 #define CONFIG_USE_ARCH_MEMCPY
75 #endif
76
77 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
78
79 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
80 #define CONFIG_SYS_CBSIZE               1024    /* Console I/O Buffer Size */
81 /* Print Buffer Size */
82 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
83 #define CONFIG_SYS_MAXARGS              16      /* max number of command */
84 /* Boot Argument Buffer Size */
85 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
86
87 #define CONFIG_CONS_INDEX               1
88
89 /* #define CONFIG_ENV_IS_NOWHERE */
90 /* #define CONFIG_ENV_IS_IN_NAND */
91 #define CONFIG_ENV_IS_IN_MMC
92 #define CONFIG_ENV_OFFSET                       0x80000
93 #define CONFIG_ENV_SIZE                         0x2000
94 /* #define CONFIG_ENV_OFFSET_REDUND     (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE) */
95
96 #define CONFIG_SYS_MMC_ENV_DEV          0
97 #define CONFIG_SYS_MMC_ENV_PART         1
98
99 #ifdef CONFIG_ARM64
100 #define CPU_RELEASE_ADDR                        0x80000000
101 #define COUNTER_FREQUENCY                       50000000
102 #define CONFIG_GICV3
103 #define GICD_BASE                               0x5fe00000
104 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
105 #define GICR_BASE                               0x5fe40000
106 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
107 #define GICR_BASE                               0x5fe80000
108 #endif
109 #else
110 /* Time clock 1MHz */
111 #define CONFIG_SYS_TIMER_RATE                   1000000
112 #endif
113
114
115 #define CONFIG_SYS_MAX_NAND_DEVICE                      1
116 #define CONFIG_SYS_NAND_MAX_CHIPS                       2
117 #define CONFIG_SYS_NAND_ONFI_DETECTION
118
119 #define CONFIG_NAND_DENALI_ECC_SIZE                     1024
120
121 #ifdef CONFIG_ARCH_UNIPHIER_SLD3
122 #define CONFIG_SYS_NAND_REGS_BASE                       0xf8100000
123 #define CONFIG_SYS_NAND_DATA_BASE                       0xf8000000
124 #else
125 #define CONFIG_SYS_NAND_REGS_BASE                       0x68100000
126 #define CONFIG_SYS_NAND_DATA_BASE                       0x68000000
127 #endif
128
129 #define CONFIG_SYS_NAND_BASE            (CONFIG_SYS_NAND_DATA_BASE + 0x10)
130
131 #define CONFIG_SYS_NAND_USE_FLASH_BBT
132 #define CONFIG_SYS_NAND_BAD_BLOCK_POS                   0
133
134 /* USB */
135 #define CONFIG_USB_MAX_CONTROLLER_COUNT         2
136 #define CONFIG_SYS_USB_XHCI_MAX_ROOT_PORTS      4
137 #define CONFIG_FAT_WRITE
138 #define CONFIG_DOS_PARTITION
139
140 /* SD/MMC */
141 #define CONFIG_SUPPORT_EMMC_BOOT
142 #define CONFIG_GENERIC_MMC
143
144 /* memtest works on */
145 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
146 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x01000000)
147
148 /*
149  * Network Configuration
150  */
151 #define CONFIG_SERVERIP                 192.168.11.1
152 #define CONFIG_IPADDR                   192.168.11.10
153 #define CONFIG_GATEWAYIP                192.168.11.1
154 #define CONFIG_NETMASK                  255.255.255.0
155
156 #define CONFIG_LOADADDR                 0x84000000
157 #define CONFIG_SYS_LOAD_ADDR            CONFIG_LOADADDR
158
159 #define CONFIG_CMDLINE_EDITING          /* add command line history     */
160
161 #define CONFIG_BOOTCOMMAND              "run $bootmode"
162
163 #define CONFIG_ROOTPATH                 "/nfs/root/path"
164 #define CONFIG_NFSBOOTCOMMAND                                           \
165         "setenv bootargs $bootargs root=/dev/nfs rw "                   \
166         "nfsroot=$serverip:$rootpath "                                  \
167         "ip=$ipaddr:$serverip:$gatewayip:$netmask:$hostname:$netdev:off;" \
168                 "run __nfsboot"
169
170 #ifdef CONFIG_FIT
171 #define CONFIG_BOOTFILE                 "fitImage"
172 #define LINUXBOOT_ENV_SETTINGS \
173         "fit_addr=0x00100000\0" \
174         "fit_addr_r=0x84100000\0" \
175         "fit_size=0x00f00000\0" \
176         "norboot=setexpr fit_addr $nor_base + $fit_addr &&" \
177                 "bootm $fit_addr\0" \
178         "nandboot=nand read $fit_addr_r $fit_addr $fit_size &&" \
179                 "bootm $fit_addr_r\0" \
180         "tftpboot=tftpboot $fit_addr_r $bootfile &&" \
181                 "bootm $fit_addr_r\0" \
182         "__nfsboot=run tftpboot\0"
183 #else
184 #ifdef CONFIG_ARM64
185 #define CONFIG_BOOTFILE                 "Image"
186 #define LINUXBOOT_CMD                   "booti"
187 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80080000\0"
188 #define KERNEL_SIZE                     "kernel_size=0x00c00000\0"
189 #define RAMDISK_ADDR                    "ramdisk_addr=0x00e00000\0"
190 #else
191 #define CONFIG_BOOTFILE                 "zImage"
192 #define LINUXBOOT_CMD                   "bootz"
193 #define KERNEL_ADDR_R                   "kernel_addr_r=0x80208000\0"
194 #define KERNEL_SIZE                     "kernel_size=0x00800000\0"
195 #define RAMDISK_ADDR                    "ramdisk_addr=0x00a00000\0"
196 #endif
197 #define LINUXBOOT_ENV_SETTINGS \
198         "fdt_addr=0x00100000\0" \
199         "fdt_addr_r=0x84100000\0" \
200         "fdt_size=0x00008000\0" \
201         "kernel_addr=0x00200000\0" \
202         KERNEL_ADDR_R \
203         KERNEL_SIZE \
204         RAMDISK_ADDR \
205         "ramdisk_addr_r=0x84a00000\0" \
206         "ramdisk_size=0x00600000\0" \
207         "ramdisk_file=rootfs.cpio.uboot\0" \
208         "boot_common=setexpr bootm_low $kernel_addr_r '&' fe000000 &&" \
209                 LINUXBOOT_CMD " $kernel_addr_r $ramdisk_addr_r $fdt_addr_r\0" \
210         "norboot=setexpr kernel_addr $nor_base + $kernel_addr &&" \
211                 "setexpr kernel_size $kernel_size / 4 &&" \
212                 "cp $kernel_addr $kernel_addr_r $kernel_size &&" \
213                 "setexpr ramdisk_addr_r $nor_base + $ramdisk_addr &&" \
214                 "setexpr fdt_addr_r $nor_base + $fdt_addr &&" \
215                 "run boot_common\0" \
216         "nandboot=nand read $kernel_addr_r $kernel_addr $kernel_size &&" \
217                 "nand read $ramdisk_addr_r $ramdisk_addr $ramdisk_size &&" \
218                 "nand read $fdt_addr_r $fdt_addr $fdt_size &&" \
219                 "run boot_common\0" \
220         "tftpboot=tftpboot $kernel_addr_r $bootfile &&" \
221                 "tftpboot $ramdisk_addr_r $ramdisk_file &&" \
222                 "tftpboot $fdt_addr_r $fdt_file &&" \
223                 "run boot_common\0" \
224         "__nfsboot=tftpboot $kernel_addr_r $bootfile &&" \
225                 "tftpboot $fdt_addr_r $fdt_file &&" \
226                 "setenv ramdisk_addr_r - &&" \
227                 "run boot_common\0"
228 #endif
229
230 #define CONFIG_EXTRA_ENV_SETTINGS                               \
231         "netdev=eth0\0"                                         \
232         "verify=n\0"                                            \
233         "nor_base=0x42000000\0"                                 \
234         "sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"    \
235                 "tftpboot $tmp_addr u-boot-spl.bin &&"          \
236                 "setexpr tmp_addr $nor_base + 0x60000 &&"       \
237                 "tftpboot $tmp_addr u-boot.bin\0"               \
238         "emmcupdate=mmcsetn &&"                                 \
239                 "mmc partconf $mmc_first_dev 0 1 1 &&"          \
240                 "tftpboot u-boot-spl.bin &&"                    \
241                 "mmc write $loadaddr 0 80 &&"                   \
242                 "tftpboot u-boot.bin &&"                        \
243                 "mmc write $loadaddr 80 780\0"                  \
244         "nandupdate=nand erase 0 0x00100000 &&"                 \
245                 "tftpboot u-boot-spl.bin &&"                    \
246                 "nand write $loadaddr 0 0x00010000 &&"          \
247                 "tftpboot u-boot.bin &&"                        \
248                 "nand write $loadaddr 0x00010000 0x000f0000\0"  \
249         LINUXBOOT_ENV_SETTINGS
250
251 #define CONFIG_SYS_BOOTMAPSZ                    0x20000000
252
253 #define CONFIG_SYS_SDRAM_BASE           0x80000000
254 #define CONFIG_NR_DRAM_BANKS            2
255 /* for LD20; the last 64 byte is used for dynamic DDR PHY training */
256 #define CONFIG_SYS_MEM_TOP_HIDE         64
257
258 #if defined(CONFIG_ARM64)
259 #define CONFIG_SPL_TEXT_BASE            0x30000000
260 #elif defined(CONFIG_ARCH_UNIPHIER_SLD3) || \
261         defined(CONFIG_ARCH_UNIPHIER_LD4) || \
262         defined(CONFIG_ARCH_UNIPHIER_SLD8)
263 #define CONFIG_SPL_TEXT_BASE            0x00040000
264 #else
265 #define CONFIG_SPL_TEXT_BASE            0x00100000
266 #endif
267
268 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
269 #define CONFIG_SPL_STACK                (0x30014c00)
270 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
271 #define CONFIG_SPL_STACK                (0x3001c000)
272 #else
273 #define CONFIG_SPL_STACK                (0x00100000)
274 #endif
275 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_TEXT_BASE)
276
277 #define CONFIG_PANIC_HANG
278
279 #define CONFIG_SPL_FRAMEWORK
280 #define CONFIG_SPL_SERIAL_SUPPORT
281 #define CONFIG_SPL_NOR_SUPPORT
282 #ifdef CONFIG_ARM64
283 #define CONFIG_SPL_BOARD_LOAD_IMAGE
284 #else
285 #define CONFIG_SPL_NAND_SUPPORT
286 #define CONFIG_SPL_MMC_SUPPORT
287 #endif
288
289 #define CONFIG_SPL_BOARD_INIT
290
291 #define CONFIG_SYS_NAND_U_BOOT_OFFS             0x10000
292
293 /* subtract sizeof(struct image_header) */
294 #define CONFIG_SYS_UBOOT_BASE                   (0x60000 - 0x40)
295 #define CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR 0x80
296
297 #define CONFIG_SPL_TARGET                       "u-boot-with-spl.bin"
298 #define CONFIG_SPL_MAX_FOOTPRINT                0x10000
299 #define CONFIG_SPL_MAX_SIZE                     0x10000
300 #if defined(CONFIG_ARCH_UNIPHIER_LD11)
301 #define CONFIG_SPL_BSS_START_ADDR               0x30012000
302 #elif defined(CONFIG_ARCH_UNIPHIER_LD20)
303 #define CONFIG_SPL_BSS_START_ADDR               0x30016000
304 #endif
305 #define CONFIG_SPL_BSS_MAX_SIZE                 0x2000
306
307 #endif /* __CONFIG_UNIPHIER_COMMON_H__ */