include/configs/trats.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011 Samsung Electronics
   4  * Heungjun Kim <riverful.kim@samsung.com>
   5  *
   6  * Configuation settings for the SAMSUNG TRATS (EXYNOS4210) board.
   7  */
   8
   9 #ifndef __CONFIG_TRATS_H
  10 #define __CONFIG_TRATS_H
  11
  12 #include <configs/exynos4-common.h>
  13
  14 #ifndef CONFIG_SYS_L2CACHE_OFF
  15 #define CONFIG_SYS_L2_PL310
  16 #define CONFIG_SYS_PL310_BASE   0x10502000
  17 #endif
  18
  19 /* TRATS has 4 banks of DRAM */
  20 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  21 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  22 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  23
  24 /* Tizen - partitions definitions */
  25 #define PARTS_CSA               "csa-mmc"
  26 #define PARTS_BOOT              "boot"
  27 #define PARTS_QBOOT             "qboot"
  28 #define PARTS_CSC               "csc"
  29 #define PARTS_ROOT              "platform"
  30 #define PARTS_DATA              "data"
  31 #define PARTS_UMS               "ums"
  32
  33 #define PARTS_DEFAULT \
  34         "uuid_disk=${uuid_gpt_disk};" \
  35         "name="PARTS_CSA",start=5MiB,size=8MiB,uuid=${uuid_gpt_"PARTS_CSA"};" \
  36         "name="PARTS_BOOT",size=60MiB,uuid=${uuid_gpt_"PARTS_BOOT"};" \
  37         "name="PARTS_QBOOT",size=100MiB,uuid=${uuid_gpt_"PARTS_QBOOT"};" \
  38         "name="PARTS_CSC",size=150MiB,uuid=${uuid_gpt_"PARTS_CSC"};" \
  39         "name="PARTS_ROOT",size=1536MiB,uuid=${uuid_gpt_"PARTS_ROOT"};" \
  40         "name="PARTS_DATA",size=3000MiB,uuid=${uuid_gpt_"PARTS_DATA"};" \
  41         "name="PARTS_UMS",size=-,uuid=${uuid_gpt_"PARTS_UMS"}\0" \
  42
  43 #define CONFIG_DFU_ALT \
  44         "u-boot raw 0x80 0x400;" \
  45         "/uImage ext4 0 2;" \
  46         "/modem.bin ext4 0 2;" \
  47         "/exynos4210-trats.dtb ext4 0 2;" \
  48         ""PARTS_CSA" part 0 1;" \
  49         ""PARTS_BOOT" part 0 2;" \
  50         ""PARTS_QBOOT" part 0 3;" \
  51         ""PARTS_CSC" part 0 4;" \
  52         ""PARTS_ROOT" part 0 5;" \
  53         ""PARTS_DATA" part 0 6;" \
  54         ""PARTS_UMS" part 0 7;" \
  55         "params.bin raw 0x38 0x8;" \
  56         "/Image.itb ext4 0 2\0"
  57
  58 #define CONFIG_EXTRA_ENV_SETTINGS \
  59         "bootk=" \
  60                 "run loaduimage;" \
  61                 "if run loaddtb; then " \
  62                         "bootm 0x40007FC0 - ${fdtaddr};" \
  63                 "fi;" \
  64                 "bootm 0x40007FC0;\0" \
  65         "updatebackup=" \
  66                 "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
  67                 "mmc dev 0 0\0" \
  68         "updatebootb=" \
  69                 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
  70         "lpj=lpj=3981312\0" \
  71         "nfsboot=" \
  72                 "setenv bootargs root=/dev/nfs rw " \
  73                 "nfsroot=${nfsroot},nolock,tcp " \
  74                 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
  75                 "${netmask}:generic:usb0:off ${console} ${meminfo}" \
  76                 "; run bootk\0" \
  77         "ramfsboot=" \
  78                 "setenv bootargs root=/dev/ram0 rw rootfstype=ext2 " \
  79                 "${console} ${meminfo} " \
  80                 "initrd=0x43000000,8M ramdisk=8192\0" \
  81         "mmcboot=" \
  82                 "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
  83                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
  84                 "run bootk\0" \
  85         "bootchart=setenv opts init=/sbin/bootchartd; run bootcmd\0" \
  86         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
  87         "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
  88         "verify=n\0" \
  89         "rootfstype=ext4\0" \
  90         "console=console=ttySAC2,115200n8\0" \
  91         "meminfo=crashkernel=32M@0x50000000\0" \
  92         "nfsroot=/nfsroot/arm\0" \
  93         "bootblock=10\0" \
  94         "loaduimage=ext4load mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
  95         "loaddtb=ext4load mmc ${mmcdev}:${mmcbootpart} ${fdtaddr} " \
  96                 "${fdtfile}\0" \
  97         "mmcdev=0\0" \
  98         "mmcbootpart=2\0" \
  99         "mmcrootpart=5\0" \
 100         "opts=always_resume=1\0" \
 101         "partitions=" PARTS_DEFAULT \
 102         "dfu_alt_info=" CONFIG_DFU_ALT \
 103         "spladdr=0x40000100\0" \
 104         "splsize=0x200\0" \
 105         "splfile=falcon.bin\0" \
 106         "spl_export=" \
 107                    "setexpr spl_imgsize ${splsize} + 8 ;" \
 108                    "setenv spl_imgsize 0x${spl_imgsize};" \
 109                    "setexpr spl_imgaddr ${spladdr} - 8 ;" \
 110                    "setexpr spl_addr_tmp ${spladdr} - 4 ;" \
 111                    "mw.b ${spl_imgaddr} 0x00 ${spl_imgsize};run loaduimage;" \
 112                    "setenv bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 113                    "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo};" \
 114                    "spl export atags 0x40007FC0;" \
 115                    "crc32 ${spladdr} ${splsize} ${spl_imgaddr};" \
 116                    "mw.l ${spl_addr_tmp} ${splsize};" \
 117                    "ext4write mmc ${mmcdev}:${mmcbootpart}" \
 118                    " /${splfile} ${spl_imgaddr} ${spl_imgsize};" \
 119                    "setenv spl_imgsize;" \
 120                    "setenv spl_imgaddr;" \
 121                    "setenv spl_addr_tmp;\0" \
 122         ENV_ITB \
 123         "fdtaddr=40800000\0" \
 124
 125 /* Falcon mode definitions */
 126
 127 /* GPT */
 128
 129 /* Common misc for Samsung */
 130 #define CONFIG_MISC_COMMON
 131
 132 /* Download menu - Samsung common */
 133 #define CONFIG_LCD_MENU
 134
 135 /* Download menu - definitions for check keys */
 136 #ifndef __ASSEMBLY__
 137
 138 #define KEY_PWR_PMIC_NAME               "MAX8997_PMIC"
 139 #define KEY_PWR_STATUS_REG              MAX8997_REG_STATUS1
 140 #define KEY_PWR_STATUS_MASK             (1 << 0)
 141 #define KEY_PWR_INTERRUPT_REG           MAX8997_REG_INT1
 142 #define KEY_PWR_INTERRUPT_MASK          (1 << 0)
 143
 144 #define KEY_VOL_UP_GPIO                 EXYNOS4_GPIO_X20
 145 #define KEY_VOL_DOWN_GPIO               EXYNOS4_GPIO_X21
 146 #endif /* __ASSEMBLY__ */
 147
 148 /* LCD console */
 149 #define LCD_BPP                 LCD_COLOR16
 150
 151 /* LCD */
 152 #define CONFIG_FB_ADDR          0x52504000
 153 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE  ((500 * 160 * 4) + 54)
 154
 155 #endif  /* __CONFIG_H */