include/configs/ti_armv7_keystone2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Common configuration header file for all Keystone II EVM platforms
   4  *
   5  * (C) Copyright 2012-2014
   6  *     Texas Instruments Incorporated, <www.ti.com>
   7  */
   8
   9 #ifndef __CONFIG_KS2_EVM_H
  10 #define __CONFIG_KS2_EVM_H
  11
  12 #define CONFIG_SOC_KEYSTONE
  13
  14 /* U-Boot Build Configuration */
  15 #define CONFIG_SKIP_LOWLEVEL_INIT       /* U-Boot is a 2nd stage loader */
  16
  17 /* SoC Configuration */
  18 #define CONFIG_ARCH_CPU_INIT
  19 #define CONFIG_SPL_TARGET               "u-boot-spi.gph"
  20 #define CONFIG_SYS_DCACHE_OFF
  21
  22 /* Memory Configuration */
  23 #define CONFIG_SYS_LPAE_SDRAM_BASE      0x800000000
  24 #define CONFIG_MAX_RAM_BANK_SIZE        (2 << 30)       /* 2GB */
  25 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_ISW_ENTRY_ADDR - \
  26                                         GENERATED_GBL_DATA_SIZE)
  27
  28 #ifdef CONFIG_SYS_MALLOC_F_LEN
  29 #define SPL_MALLOC_F_SIZE       CONFIG_SYS_MALLOC_F_LEN
  30 #else
  31 #define SPL_MALLOC_F_SIZE       0
  32 #endif
  33
  34 /* SPL SPI Loader Configuration */
  35 #define CONFIG_SPL_PAD_TO               65536
  36 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_PAD_TO - 8)
  37 #define CONFIG_SPL_BSS_START_ADDR       (CONFIG_ISW_ENTRY_ADDR + \
  38                                         CONFIG_SPL_MAX_SIZE)
  39 #define CONFIG_SPL_BSS_MAX_SIZE         (32 * 1024)
  40 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  41                                         CONFIG_SPL_BSS_MAX_SIZE)
  42 #define CONFIG_SYS_SPL_MALLOC_SIZE      (32 * 1024)
  43 #define KEYSTONE_SPL_STACK_SIZE         (8 * 1024)
  44 #define CONFIG_SPL_STACK                (CONFIG_SYS_SPL_MALLOC_START + \
  45                                         CONFIG_SYS_SPL_MALLOC_SIZE + \
  46                                         SPL_MALLOC_F_SIZE + \
  47                                         KEYSTONE_SPL_STACK_SIZE - 4)
  48 #define CONFIG_SYS_SPI_U_BOOT_OFFS      CONFIG_SPL_PAD_TO
  49
  50 /* SRAM scratch space entries  */
  51 #define SRAM_SCRATCH_SPACE_ADDR CONFIG_SPL_STACK + 0x8
  52
  53 #define TI_SRAM_SCRATCH_BOARD_EEPROM_START      (SRAM_SCRATCH_SPACE_ADDR)
  54 #define TI_SRAM_SCRATCH_BOARD_EEPROM_END        (SRAM_SCRATCH_SPACE_ADDR + 0x200)
  55 #define KEYSTONE_SRAM_SCRATCH_SPACE_END         (TI_SRAM_SCRATCH_BOARD_EEPROM_END)
  56
  57 /* UART Configuration */
  58 #define CONFIG_SYS_NS16550_MEM32
  59 #if defined(CONFIG_SPL_BUILD) || !defined(CONFIG_DM_SERIAL)
  60 #define CONFIG_SYS_NS16550_SERIAL
  61 #define CONFIG_SYS_NS16550_REG_SIZE     -4
  62 #endif
  63 #define CONFIG_SYS_NS16550_COM1         KS2_UART0_BASE
  64 #define CONFIG_SYS_NS16550_COM2         KS2_UART1_BASE
  65
  66 #ifndef CONFIG_SOC_K2G
  67 #define CONFIG_SYS_NS16550_CLK          ks_clk_get_rate(KS2_CLK1_6)
  68 #else
  69 #define CONFIG_SYS_NS16550_CLK          ks_clk_get_rate(uart_pll_clk) / 2
  70 #endif
  71
  72 /* SPI Configuration */
  73 #define CONFIG_SYS_SPI_CLK              ks_clk_get_rate(KS2_CLK1_6)
  74 #define CONFIG_SYS_SPI0
  75 #define CONFIG_SYS_SPI_BASE             KS2_SPI0_BASE
  76 #define CONFIG_SYS_SPI0_NUM_CS          4
  77 #define CONFIG_SYS_SPI1
  78 #define CONFIG_SYS_SPI1_BASE            KS2_SPI1_BASE
  79 #define CONFIG_SYS_SPI1_NUM_CS          4
  80 #define CONFIG_SYS_SPI2
  81 #define CONFIG_SYS_SPI2_BASE            KS2_SPI2_BASE
  82 #define CONFIG_SYS_SPI2_NUM_CS          4
  83 #ifdef CONFIG_SPL_BUILD
  84 #undef CONFIG_DM_SPI
  85 #undef CONFIG_DM_SPI_FLASH
  86 #endif
  87
  88 /* Network Configuration */
  89 #define CONFIG_BOOTP_DEFAULT
  90 #define CONFIG_BOOTP_DNS2
  91 #define CONFIG_BOOTP_SEND_HOSTNAME
  92 #define CONFIG_NET_RETRY_COUNT          32
  93 #define CONFIG_SYS_SGMII_REFCLK_MHZ     312
  94 #define CONFIG_SYS_SGMII_LINERATE_MHZ   1250
  95 #define CONFIG_SYS_SGMII_RATESCALE      2
  96
  97 /* Keyston Navigator Configuration */
  98 #define CONFIG_TI_KSNAV
  99 #define CONFIG_KSNAV_QM_BASE_ADDRESS            KS2_QM_BASE_ADDRESS
 100 #define CONFIG_KSNAV_QM_CONF_BASE               KS2_QM_CONF_BASE
 101 #define CONFIG_KSNAV_QM_DESC_SETUP_BASE         KS2_QM_DESC_SETUP_BASE
 102 #define CONFIG_KSNAV_QM_STATUS_RAM_BASE         KS2_QM_STATUS_RAM_BASE
 103 #define CONFIG_KSNAV_QM_INTD_CONF_BASE          KS2_QM_INTD_CONF_BASE
 104 #define CONFIG_KSNAV_QM_PDSP1_CMD_BASE          KS2_QM_PDSP1_CMD_BASE
 105 #define CONFIG_KSNAV_QM_PDSP1_CTRL_BASE         KS2_QM_PDSP1_CTRL_BASE
 106 #define CONFIG_KSNAV_QM_PDSP1_IRAM_BASE         KS2_QM_PDSP1_IRAM_BASE
 107 #define CONFIG_KSNAV_QM_MANAGER_QUEUES_BASE     KS2_QM_MANAGER_QUEUES_BASE
 108 #define CONFIG_KSNAV_QM_MANAGER_Q_PROXY_BASE    KS2_QM_MANAGER_Q_PROXY_BASE
 109 #define CONFIG_KSNAV_QM_QUEUE_STATUS_BASE       KS2_QM_QUEUE_STATUS_BASE
 110 #define CONFIG_KSNAV_QM_LINK_RAM_BASE           KS2_QM_LINK_RAM_BASE
 111 #define CONFIG_KSNAV_QM_REGION_NUM              KS2_QM_REGION_NUM
 112 #define CONFIG_KSNAV_QM_QPOOL_NUM               KS2_QM_QPOOL_NUM
 113
 114 /* NETCP pktdma */
 115 #define CONFIG_KSNAV_PKTDMA_NETCP
 116 #define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE       KS2_NETCP_PDMA_CTRL_BASE
 117 #define CONFIG_KSNAV_NETCP_PDMA_TX_BASE         KS2_NETCP_PDMA_TX_BASE
 118 #define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM       KS2_NETCP_PDMA_TX_CH_NUM
 119 #define CONFIG_KSNAV_NETCP_PDMA_RX_BASE         KS2_NETCP_PDMA_RX_BASE
 120 #define CONFIG_KSNAV_NETCP_PDMA_RX_CH_NUM       KS2_NETCP_PDMA_RX_CH_NUM
 121 #define CONFIG_KSNAV_NETCP_PDMA_SCHED_BASE      KS2_NETCP_PDMA_SCHED_BASE
 122 #define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_BASE    KS2_NETCP_PDMA_RX_FLOW_BASE
 123 #define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_NUM     KS2_NETCP_PDMA_RX_FLOW_NUM
 124 #define CONFIG_KSNAV_NETCP_PDMA_RX_FREE_QUEUE   KS2_NETCP_PDMA_RX_FREE_QUEUE
 125 #define CONFIG_KSNAV_NETCP_PDMA_RX_RCV_QUEUE    KS2_NETCP_PDMA_RX_RCV_QUEUE
 126 #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE    KS2_NETCP_PDMA_TX_SND_QUEUE
 127
 128 /* Keystone net */
 129 #define CONFIG_KSNET_MAC_ID_BASE                KS2_MAC_ID_BASE_ADDR
 130 #define CONFIG_KSNET_NETCP_BASE                 KS2_NETCP_BASE
 131 #define CONFIG_KSNET_SERDES_SGMII_BASE          KS2_SGMII_SERDES_BASE
 132 #define CONFIG_KSNET_SERDES_SGMII2_BASE         KS2_SGMII_SERDES2_BASE
 133 #define CONFIG_KSNET_SERDES_LANES_PER_SGMII     KS2_LANES_PER_SGMII_SERDES
 134
 135 #define CONFIG_AEMIF_CNTRL_BASE         KS2_AEMIF_CNTRL_BASE
 136
 137 /* I2C Configuration */
 138 #define CONFIG_SYS_DAVINCI_I2C_SPEED    100000
 139 #define CONFIG_SYS_DAVINCI_I2C_SLAVE    0x10 /* SMBus host address */
 140 #define CONFIG_SYS_DAVINCI_I2C_SPEED1   100000
 141 #define CONFIG_SYS_DAVINCI_I2C_SLAVE1   0x10 /* SMBus host address */
 142 #define CONFIG_SYS_DAVINCI_I2C_SPEED2   100000
 143 #define CONFIG_SYS_DAVINCI_I2C_SLAVE2   0x10 /* SMBus host address */
 144
 145 /* EEPROM definitions */
 146 #define CONFIG_SYS_I2C_EEPROM_ADDR_LEN          2
 147 #define CONFIG_SYS_I2C_EEPROM_ADDR              0x50
 148 #define CONFIG_SYS_EEPROM_PAGE_WRITE_BITS       6
 149 #define CONFIG_SYS_EEPROM_PAGE_WRITE_DELAY_MS   20
 150 #define CONFIG_ENV_EEPROM_IS_ON_I2C
 151
 152 /* NAND Configuration */
 153 #define CONFIG_KEYSTONE_RBL_NAND
 154 #define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE       CONFIG_ENV_OFFSET
 155 #define CONFIG_SYS_NAND_MASK_CLE                0x4000
 156 #define CONFIG_SYS_NAND_MASK_ALE                0x2000
 157 #define CONFIG_SYS_NAND_CS                      2
 158 #define CONFIG_SYS_NAND_USE_FLASH_BBT
 159 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 160
 161 #define CONFIG_SYS_NAND_LARGEPAGE
 162 #define CONFIG_SYS_NAND_BASE_LIST               { 0x30000000, }
 163 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 164 #define CONFIG_SYS_NAND_MAX_CHIPS               1
 165 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 166
 167 #define DFU_ALT_INFO_MMC \
 168         "dfu_alt_info_mmc=" \
 169         "MLO fat 0 1;" \
 170         "u-boot.img fat 0 1;" \
 171         "uEnv.txt fat 0 1\0"
 172
 173 /* DFU settings */
 174 #define DFUARGS \
 175         "dfu_bufsiz=0x10000\0" \
 176         DFU_ALT_INFO_MMC \
 177
 178 /* U-Boot general configuration */
 179 #define CONFIG_MX_CYCLIC
 180 #define CONFIG_TIMESTAMP
 181
 182 /* EDMA3 */
 183 #define CONFIG_TI_EDMA3
 184
 185 #define KERNEL_MTD_PARTS                                                \
 186         "mtdparts="                                                     \
 187         SPI_MTD_PARTS
 188
 189 #define DEFAULT_FW_INITRAMFS_BOOT_ENV                                   \
 190         "name_fw_rd=k2-fw-initrd.cpio.gz\0"                             \
 191         "set_rd_spec=setenv rd_spec ${rdaddr}:${filesize}\0"            \
 192         "init_fw_rd_net=dhcp ${rdaddr} ${tftp_root}/${name_fw_rd}; "    \
 193                 "run set_rd_spec\0"                                     \
 194         "init_fw_rd_nfs=nfs ${rdaddr} ${nfs_root}/boot/${name_fw_rd}; " \
 195                 "run set_rd_spec\0"                                     \
 196         "init_fw_rd_ramfs=setenv rd_spec -\0"                           \
 197         "init_fw_rd_ubi=ubifsload ${rdaddr} ${bootdir}/${name_fw_rd}; " \
 198                 "run set_rd_spec\0"                                     \
 199
 200 #define DEFAULT_PMMC_BOOT_ENV                                           \
 201         "set_name_pmmc=setenv name_pmmc ti-sci-firmware-${soc_variant}.bin\0" \
 202         "dev_pmmc=0\0"                                                  \
 203         "get_pmmc_net=dhcp ${loadaddr} ${tftp_root}/${name_pmmc}\0"     \
 204         "get_pmmc_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_pmmc}\0"  \
 205         "get_pmmc_ramfs=run get_pmmc_net\0"                             \
 206         "get_pmmc_mmc=load mmc ${bootpart} ${loadaddr} "                \
 207                         "${bootdir}/${name_pmmc}\0"                     \
 208         "get_pmmc_ubi=ubifsload ${loadaddr} ${bootdir}/${name_pmmc}\0"  \
 209         "run_pmmc=rproc init; rproc list; "                             \
 210                 "rproc load ${dev_pmmc} ${loadaddr} 0x${filesize}; "    \
 211                 "rproc start ${dev_pmmc}\0"                             \
 212
 213 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 214         DEFAULT_LINUX_BOOT_ENV                                          \
 215         CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS                             \
 216         DFUARGS                                                         \
 217         "bootdir=/boot\0" \
 218         "tftp_root=/\0"                                                 \
 219         "nfs_root=/export\0"                                            \
 220         "mem_lpae=1\0"                                                  \
 221         "addr_ubi=0x82000000\0"                                         \
 222         "addr_secdb_key=0xc000000\0"                                    \
 223         "name_kern=zImage\0"                                            \
 224         "addr_mon=0x87000000\0"                                         \
 225         "addr_non_sec_mon=0x0c087fc0\0"                                 \
 226         "addr_load_sec_bm=0x0c08c000\0"                                 \
 227         "run_mon=mon_install ${addr_mon}\0"                             \
 228         "run_mon_hs=mon_install ${addr_non_sec_mon} "                   \
 229                         "${addr_load_sec_bm}\0"                         \
 230         "run_kern=bootz ${loadaddr} ${rd_spec} ${fdtaddr}\0"            \
 231         "init_net=run args_all args_net\0"                              \
 232         "init_nfs=setenv autoload no; dhcp; run args_all args_net\0"    \
 233         "init_ubi=run args_all args_ubi; "                              \
 234                 "ubi part ubifs; ubifsmount ubi:rootfs;\0"                      \
 235         "get_fdt_net=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"        \
 236         "get_fdt_nfs=nfs ${fdtaddr} ${nfs_root}/boot/${name_fdt}\0"     \
 237         "get_fdt_ubi=ubifsload ${fdtaddr} ${bootdir}/${name_fdt}\0"             \
 238         "get_kern_net=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"     \
 239         "get_kern_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_kern}\0"  \
 240         "get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0"          \
 241         "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"       \
 242         "get_mon_nfs=nfs ${addr_mon} ${nfs_root}/boot/${name_mon}\0"    \
 243         "get_mon_ubi=ubifsload ${addr_mon} ${bootdir}/${name_mon}\0"    \
 244         "get_fit_net=dhcp ${fit_loadaddr} ${tftp_root}"                 \
 245                                                 "/${fit_bootfile}\0"    \
 246         "get_fit_nfs=nfs ${fit_loadaddr} ${nfs_root}/boot/${fit_bootfile}\0"\
 247         "get_fit_ubi=ubifsload ${fit_loadaddr} ${bootdir}/${fit_bootfile}\0"\
 248         "get_fit_mmc=load mmc ${bootpart} ${fit_loadaddr} "             \
 249                                         "${bootdir}/${fit_bootfile}\0"  \
 250         "get_uboot_net=dhcp ${loadaddr} ${tftp_root}/${name_uboot}\0"   \
 251         "get_uboot_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_uboot}\0" \
 252         "burn_uboot_spi=sf probe; sf erase 0 0x100000; "                \
 253                 "sf write ${loadaddr} 0 ${filesize}\0"          \
 254         "burn_uboot_nand=nand erase 0 0x100000; "                       \
 255                 "nand write ${loadaddr} 0 ${filesize}\0"                \
 256         "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 "   \
 257                 KERNEL_MTD_PARTS                                        \
 258         "args_net=setenv bootargs ${bootargs} rootfstype=nfs "          \
 259                 "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"     \
 260                 "${nfs_options} ip=dhcp\0"                              \
 261         "nfs_options=v3,tcp,rsize=4096,wsize=4096\0"                    \
 262         "get_fdt_ramfs=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"      \
 263         "get_kern_ramfs=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"   \
 264         "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"     \
 265         "get_fit_ramfs=dhcp ${fit_loadaddr} ${tftp_root}"               \
 266                                                 "/${fit_bootfile}\0"    \
 267         "get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0" \
 268         "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0"       \
 269         "get_ubi_nfs=nfs ${addr_ubi} ${nfs_root}/boot/${name_ubi}\0"    \
 270         "burn_ubi=nand erase.part ubifs; "                              \
 271                 "nand write ${addr_ubi} ubifs ${filesize}\0"            \
 272         "init_ramfs=run args_all args_ramfs get_fs_ramfs\0"             \
 273         "args_ramfs=setenv bootargs ${bootargs} "                       \
 274                 "rdinit=/sbin/init rw root=/dev/ram0 "                  \
 275                 "initrd=0x808080000,80M\0"                              \
 276         "no_post=1\0"                                                   \
 277         "mtdparts=mtdparts=davinci_nand.0:"                             \
 278                 "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
 279
 280 #ifndef CONFIG_BOOTCOMMAND
 281 #ifndef CONFIG_TI_SECURE_DEVICE
 282 #define CONFIG_BOOTCOMMAND                                              \
 283         "run init_${boot}; "                                            \
 284         "run get_mon_${boot} run_mon; "                                 \
 285         "run get_kern_${boot}; "                                        \
 286         "run init_fw_rd_${boot}; "                                      \
 287         "run get_fdt_${boot}; "                                         \
 288         "run run_kern"
 289 #else
 290 #define CONFIG_BOOTCOMMAND                                              \
 291         "run run_mon_hs; "                                              \
 292         "run init_${boot}; "                                            \
 293         "run get_fit_${boot}; "                                         \
 294         "bootm ${fit_loadaddr}#${name_fdt}"
 295 #endif
 296 #endif
 297
 298 /* Now for the remaining common defines */
 299 #include <configs/ti_armv7_common.h>
 300
 301 /* we may include files below only after all above definitions */
 302 #include <asm/arch/hardware.h>
 303 #include <asm/arch/clock.h>
 304 #ifndef CONFIG_SOC_K2G
 305 #define CONFIG_SYS_HZ_CLOCK             ks_clk_get_rate(KS2_CLK1_6)
 306 #else
 307 #define CONFIG_SYS_HZ_CLOCK             get_external_clk(sys_clk)
 308 #endif
 309
 310 #endif /* __CONFIG_KS2_EVM_H */