include/configs/ti_armv7_keystone2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Common configuration header file for all Keystone II EVM platforms
   4  *
   5  * (C) Copyright 2012-2014
   6  *     Texas Instruments Incorporated, <www.ti.com>
   7  */
   8
   9 #ifndef __CONFIG_KS2_EVM_H
  10 #define __CONFIG_KS2_EVM_H
  11
  12 #define CONFIG_SOC_KEYSTONE
  13
  14 /* U-Boot Build Configuration */
  15
  16 /* SoC Configuration */
  17 #define CONFIG_SPL_TARGET               "u-boot-spi.gph"
  18
  19 /* Memory Configuration */
  20 #define CONFIG_SYS_LPAE_SDRAM_BASE      0x800000000
  21 #define CONFIG_MAX_RAM_BANK_SIZE        (2 << 30)       /* 2GB */
  22 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_ISW_ENTRY_ADDR - \
  23                                         GENERATED_GBL_DATA_SIZE)
  24
  25 #ifdef CONFIG_SYS_MALLOC_F_LEN
  26 #define SPL_MALLOC_F_SIZE       CONFIG_SYS_MALLOC_F_LEN
  27 #else
  28 #define SPL_MALLOC_F_SIZE       0
  29 #endif
  30
  31 /* SPL SPI Loader Configuration */
  32 #define CONFIG_SPL_PAD_TO               65536
  33 #define CONFIG_SPL_MAX_SIZE             (CONFIG_SPL_PAD_TO - 8)
  34 #define CONFIG_SPL_BSS_START_ADDR       (CONFIG_ISW_ENTRY_ADDR + \
  35                                         CONFIG_SPL_MAX_SIZE)
  36 #define CONFIG_SPL_BSS_MAX_SIZE         (32 * 1024)
  37 #define CONFIG_SYS_SPL_MALLOC_START     (CONFIG_SPL_BSS_START_ADDR + \
  38                                         CONFIG_SPL_BSS_MAX_SIZE)
  39 #define CONFIG_SYS_SPL_MALLOC_SIZE      (32 * 1024)
  40 #define KEYSTONE_SPL_STACK_SIZE         (8 * 1024)
  41 #define CONFIG_SPL_STACK                (CONFIG_SYS_SPL_MALLOC_START + \
  42                                         CONFIG_SYS_SPL_MALLOC_SIZE + \
  43                                         SPL_MALLOC_F_SIZE + \
  44                                         KEYSTONE_SPL_STACK_SIZE - 4)
  45
  46 /* SRAM scratch space entries  */
  47 #define SRAM_SCRATCH_SPACE_ADDR CONFIG_SPL_STACK + 0x8
  48
  49 #define TI_SRAM_SCRATCH_BOARD_EEPROM_START      (SRAM_SCRATCH_SPACE_ADDR)
  50 #define TI_SRAM_SCRATCH_BOARD_EEPROM_END        (SRAM_SCRATCH_SPACE_ADDR + 0x200)
  51 #define KEYSTONE_SRAM_SCRATCH_SPACE_END         (TI_SRAM_SCRATCH_BOARD_EEPROM_END)
  52
  53 /* UART Configuration */
  54 #define CONFIG_SYS_NS16550_MEM32
  55 #define CONFIG_SYS_NS16550_COM1         KS2_UART0_BASE
  56 #define CONFIG_SYS_NS16550_COM2         KS2_UART1_BASE
  57
  58 #ifndef CONFIG_SOC_K2G
  59 #define CONFIG_SYS_NS16550_CLK          ks_clk_get_rate(KS2_CLK1_6)
  60 #else
  61 #define CONFIG_SYS_NS16550_CLK          ks_clk_get_rate(uart_pll_clk) / 2
  62 #endif
  63
  64 /* SPI Configuration */
  65 #define CONFIG_SYS_SPI_CLK              ks_clk_get_rate(KS2_CLK1_6)
  66
  67 /* Network Configuration */
  68 #define CONFIG_NET_RETRY_COUNT          32
  69 #define CONFIG_SYS_SGMII_REFCLK_MHZ     312
  70 #define CONFIG_SYS_SGMII_LINERATE_MHZ   1250
  71 #define CONFIG_SYS_SGMII_RATESCALE      2
  72
  73 /* Keyston Navigator Configuration */
  74 #define CONFIG_TI_KSNAV
  75 #define CONFIG_KSNAV_QM_BASE_ADDRESS            KS2_QM_BASE_ADDRESS
  76 #define CONFIG_KSNAV_QM_CONF_BASE               KS2_QM_CONF_BASE
  77 #define CONFIG_KSNAV_QM_DESC_SETUP_BASE         KS2_QM_DESC_SETUP_BASE
  78 #define CONFIG_KSNAV_QM_STATUS_RAM_BASE         KS2_QM_STATUS_RAM_BASE
  79 #define CONFIG_KSNAV_QM_INTD_CONF_BASE          KS2_QM_INTD_CONF_BASE
  80 #define CONFIG_KSNAV_QM_PDSP1_CMD_BASE          KS2_QM_PDSP1_CMD_BASE
  81 #define CONFIG_KSNAV_QM_PDSP1_CTRL_BASE         KS2_QM_PDSP1_CTRL_BASE
  82 #define CONFIG_KSNAV_QM_PDSP1_IRAM_BASE         KS2_QM_PDSP1_IRAM_BASE
  83 #define CONFIG_KSNAV_QM_MANAGER_QUEUES_BASE     KS2_QM_MANAGER_QUEUES_BASE
  84 #define CONFIG_KSNAV_QM_MANAGER_Q_PROXY_BASE    KS2_QM_MANAGER_Q_PROXY_BASE
  85 #define CONFIG_KSNAV_QM_QUEUE_STATUS_BASE       KS2_QM_QUEUE_STATUS_BASE
  86 #define CONFIG_KSNAV_QM_LINK_RAM_BASE           KS2_QM_LINK_RAM_BASE
  87 #define CONFIG_KSNAV_QM_REGION_NUM              KS2_QM_REGION_NUM
  88 #define CONFIG_KSNAV_QM_QPOOL_NUM               KS2_QM_QPOOL_NUM
  89
  90 /* NETCP pktdma */
  91 #define CONFIG_KSNAV_PKTDMA_NETCP
  92 #define CONFIG_KSNAV_NETCP_PDMA_CTRL_BASE       KS2_NETCP_PDMA_CTRL_BASE
  93 #define CONFIG_KSNAV_NETCP_PDMA_TX_BASE         KS2_NETCP_PDMA_TX_BASE
  94 #define CONFIG_KSNAV_NETCP_PDMA_TX_CH_NUM       KS2_NETCP_PDMA_TX_CH_NUM
  95 #define CONFIG_KSNAV_NETCP_PDMA_RX_BASE         KS2_NETCP_PDMA_RX_BASE
  96 #define CONFIG_KSNAV_NETCP_PDMA_RX_CH_NUM       KS2_NETCP_PDMA_RX_CH_NUM
  97 #define CONFIG_KSNAV_NETCP_PDMA_SCHED_BASE      KS2_NETCP_PDMA_SCHED_BASE
  98 #define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_BASE    KS2_NETCP_PDMA_RX_FLOW_BASE
  99 #define CONFIG_KSNAV_NETCP_PDMA_RX_FLOW_NUM     KS2_NETCP_PDMA_RX_FLOW_NUM
 100 #define CONFIG_KSNAV_NETCP_PDMA_RX_FREE_QUEUE   KS2_NETCP_PDMA_RX_FREE_QUEUE
 101 #define CONFIG_KSNAV_NETCP_PDMA_RX_RCV_QUEUE    KS2_NETCP_PDMA_RX_RCV_QUEUE
 102 #define CONFIG_KSNAV_NETCP_PDMA_TX_SND_QUEUE    KS2_NETCP_PDMA_TX_SND_QUEUE
 103
 104 /* Keystone net */
 105 #define CONFIG_KSNET_MAC_ID_BASE                KS2_MAC_ID_BASE_ADDR
 106 #define CONFIG_KSNET_NETCP_BASE                 KS2_NETCP_BASE
 107 #define CONFIG_KSNET_SERDES_SGMII_BASE          KS2_SGMII_SERDES_BASE
 108 #define CONFIG_KSNET_SERDES_SGMII2_BASE         KS2_SGMII_SERDES2_BASE
 109 #define CONFIG_KSNET_SERDES_LANES_PER_SGMII     KS2_LANES_PER_SGMII_SERDES
 110
 111 #define CONFIG_AEMIF_CNTRL_BASE         KS2_AEMIF_CNTRL_BASE
 112
 113 /* I2C Configuration */
 114 #define CONFIG_SYS_DAVINCI_I2C_SPEED    100000
 115 #define CONFIG_SYS_DAVINCI_I2C_SLAVE    0x10 /* SMBus host address */
 116 #define CONFIG_SYS_DAVINCI_I2C_SPEED1   100000
 117 #define CONFIG_SYS_DAVINCI_I2C_SLAVE1   0x10 /* SMBus host address */
 118 #define CONFIG_SYS_DAVINCI_I2C_SPEED2   100000
 119 #define CONFIG_SYS_DAVINCI_I2C_SLAVE2   0x10 /* SMBus host address */
 120
 121 /* EEPROM definitions */
 122
 123 /* NAND Configuration */
 124 #define CONFIG_KEYSTONE_RBL_NAND
 125 #define CONFIG_KEYSTONE_NAND_MAX_RBL_SIZE       CONFIG_ENV_OFFSET
 126 #define CONFIG_SYS_NAND_MASK_CLE                0x4000
 127 #define CONFIG_SYS_NAND_MASK_ALE                0x2000
 128 #define CONFIG_SYS_NAND_CS                      2
 129 #define CONFIG_SYS_NAND_4BIT_HW_ECC_OOBFIRST
 130
 131 #define CONFIG_SYS_NAND_LARGEPAGE
 132 #define CONFIG_SYS_NAND_BASE_LIST               { 0x30000000, }
 133 #define CONFIG_SYS_MAX_NAND_DEVICE              1
 134 #define CONFIG_SYS_NAND_MAX_CHIPS               1
 135 #define CONFIG_SYS_NAND_NO_SUBPAGE_WRITE
 136
 137 #define DFU_ALT_INFO_MMC \
 138         "dfu_alt_info_mmc=" \
 139         "MLO fat 0 1;" \
 140         "u-boot.img fat 0 1;" \
 141         "uEnv.txt fat 0 1\0"
 142
 143 /* DFU settings */
 144 #define DFUARGS \
 145         "dfu_bufsiz=0x10000\0" \
 146         DFU_ALT_INFO_MMC \
 147
 148 /* U-Boot general configuration */
 149 #define CONFIG_TIMESTAMP
 150
 151 /* EDMA3 */
 152 #define CONFIG_TI_EDMA3
 153
 154 #define KERNEL_MTD_PARTS                                                \
 155         "mtdparts="                                                     \
 156         SPI_MTD_PARTS
 157
 158 #define DEFAULT_FW_INITRAMFS_BOOT_ENV                                   \
 159         "name_fw_rd=k2-fw-initrd.cpio.gz\0"                             \
 160         "set_rd_spec=setenv rd_spec ${rdaddr}:${filesize}\0"            \
 161         "init_fw_rd_net=dhcp ${rdaddr} ${tftp_root}/${name_fw_rd}; "    \
 162                 "run set_rd_spec\0"                                     \
 163         "init_fw_rd_nfs=nfs ${rdaddr} ${nfs_root}/boot/${name_fw_rd}; " \
 164                 "run set_rd_spec\0"                                     \
 165         "init_fw_rd_ramfs=setenv rd_spec -\0"                           \
 166         "init_fw_rd_ubi=ubifsload ${rdaddr} ${bootdir}/${name_fw_rd}; " \
 167                 "run set_rd_spec\0"                                     \
 168
 169 #define DEFAULT_PMMC_BOOT_ENV                                           \
 170         "set_name_pmmc=setenv name_pmmc ti-sci-firmware-${soc_variant}.bin\0" \
 171         "dev_pmmc=0\0"                                                  \
 172         "get_pmmc_net=dhcp ${loadaddr} ${tftp_root}/${name_pmmc}\0"     \
 173         "get_pmmc_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_pmmc}\0"  \
 174         "get_pmmc_ramfs=run get_pmmc_net\0"                             \
 175         "get_pmmc_mmc=load mmc ${bootpart} ${loadaddr} "                \
 176                         "${bootdir}/${name_pmmc}\0"                     \
 177         "get_pmmc_ubi=ubifsload ${loadaddr} ${bootdir}/${name_pmmc}\0"  \
 178         "run_pmmc=rproc init; rproc list; "                             \
 179                 "rproc load ${dev_pmmc} ${loadaddr} 0x${filesize}; "    \
 180                 "rproc start ${dev_pmmc}\0"                             \
 181
 182 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
 183         DEFAULT_LINUX_BOOT_ENV                                          \
 184         ENV_KS2_BOARD_SETTINGS                                          \
 185         DFUARGS                                                         \
 186         "bootdir=/boot\0" \
 187         "tftp_root=/\0"                                                 \
 188         "nfs_root=/export\0"                                            \
 189         "mem_lpae=1\0"                                                  \
 190         "uinitrd_fixup=1\0"                                             \
 191         "addr_ubi=0x82000000\0"                                         \
 192         "addr_secdb_key=0xc000000\0"                                    \
 193         "name_kern=zImage\0"                                            \
 194         "addr_mon=0x87000000\0"                                         \
 195         "addr_non_sec_mon=0x0c097fc0\0"                                 \
 196         "addr_load_sec_bm=0x0c09c000\0"                                 \
 197         "run_mon=mon_install ${addr_mon}\0"                             \
 198         "run_mon_hs=mon_install ${addr_non_sec_mon} "                   \
 199                         "${addr_load_sec_bm}\0"                         \
 200         "run_kern=bootz ${loadaddr} ${rd_spec} ${fdtaddr}\0"            \
 201         "init_net=run args_all args_net\0"                              \
 202         "init_nfs=setenv autoload no; dhcp; run args_all args_net\0"    \
 203         "init_ubi=run args_all args_ubi; "                              \
 204                 "ubi part ubifs; ubifsmount ubi:rootfs;\0"                      \
 205         "get_fdt_net=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"        \
 206         "get_fdt_nfs=nfs ${fdtaddr} ${nfs_root}/boot/${name_fdt}\0"     \
 207         "get_fdt_ubi=ubifsload ${fdtaddr} ${bootdir}/${name_fdt}\0"             \
 208         "get_kern_net=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"     \
 209         "get_kern_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_kern}\0"  \
 210         "get_kern_ubi=ubifsload ${loadaddr} ${bootdir}/${name_kern}\0"          \
 211         "get_mon_net=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"       \
 212         "get_mon_nfs=nfs ${addr_mon} ${nfs_root}/boot/${name_mon}\0"    \
 213         "get_mon_ubi=ubifsload ${addr_mon} ${bootdir}/${name_mon}\0"    \
 214         "get_fit_net=dhcp ${addr_fit} ${tftp_root}/${name_fit}\0"       \
 215         "get_fit_nfs=nfs ${addr_fit} ${nfs_root}/boot/${name_fit}\0"    \
 216         "get_fit_ubi=ubifsload ${addr_fit} ${bootdir}/${name_fit}\0"    \
 217         "get_fit_mmc=load mmc ${bootpart} ${addr_fit} ${bootdir}/${name_fit}\0" \
 218         "get_uboot_net=dhcp ${loadaddr} ${tftp_root}/${name_uboot}\0"   \
 219         "get_uboot_nfs=nfs ${loadaddr} ${nfs_root}/boot/${name_uboot}\0" \
 220         "burn_uboot_spi=sf probe; sf erase 0 0x100000; "                \
 221                 "sf write ${loadaddr} 0 ${filesize}\0"          \
 222         "burn_uboot_nand=nand erase 0 0x100000; "                       \
 223                 "nand write ${loadaddr} 0 ${filesize}\0"                \
 224         "args_all=setenv bootargs console=ttyS0,115200n8 rootwait=1 "   \
 225                 KERNEL_MTD_PARTS                                        \
 226         "args_net=setenv bootargs ${bootargs} rootfstype=nfs "          \
 227                 "root=/dev/nfs rw nfsroot=${serverip}:${nfs_root},"     \
 228                 "${nfs_options} ip=dhcp\0"                              \
 229         "nfs_options=v3,tcp,rsize=4096,wsize=4096\0"                    \
 230         "get_fdt_ramfs=dhcp ${fdtaddr} ${tftp_root}/${name_fdt}\0"      \
 231         "get_kern_ramfs=dhcp ${loadaddr} ${tftp_root}/${name_kern}\0"   \
 232         "get_mon_ramfs=dhcp ${addr_mon} ${tftp_root}/${name_mon}\0"     \
 233         "get_fit_ramfs=dhcp ${addr_fit} ${tftp_root}/${name_fit}\0"     \
 234         "get_fs_ramfs=dhcp ${rdaddr} ${tftp_root}/${name_fs}\0" \
 235         "get_ubi_net=dhcp ${addr_ubi} ${tftp_root}/${name_ubi}\0"       \
 236         "get_ubi_nfs=nfs ${addr_ubi} ${nfs_root}/boot/${name_ubi}\0"    \
 237         "burn_ubi=nand erase.part ubifs; "                              \
 238                 "nand write ${addr_ubi} ubifs ${filesize}\0"            \
 239         "init_ramfs=run args_all args_ramfs get_fs_ramfs\0"             \
 240         "args_ramfs=setenv bootargs ${bootargs} "                       \
 241                 "rdinit=/sbin/init rw root=/dev/ram0 "                  \
 242                 "initrd=0x808080000,80M\0"                              \
 243         "no_post=1\0"                                                   \
 244         "mtdparts=mtdparts=davinci_nand.0:"                             \
 245                 "1024k(bootloader)ro,512k(params)ro,-(ubifs)\0"
 246
 247 #ifndef CONFIG_BOOTCOMMAND
 248 #ifndef CONFIG_TI_SECURE_DEVICE
 249 #define CONFIG_BOOTCOMMAND                                              \
 250         "run init_${boot}; "                                            \
 251         "run get_mon_${boot} run_mon; "                                 \
 252         "run get_kern_${boot}; "                                        \
 253         "run init_fw_rd_${boot}; "                                      \
 254         "run get_fdt_${boot}; "                                         \
 255         "run run_kern"
 256 #else
 257 #define CONFIG_BOOTCOMMAND                                              \
 258         "run run_mon_hs; "                                              \
 259         "run init_${boot}; "                                            \
 260         "run get_fit_${boot}; "                                         \
 261         "bootm ${addr_fit}#${name_fdt}"
 262 #endif
 263 #endif
 264
 265 /* Now for the remaining common defines */
 266 #include <configs/ti_armv7_common.h>
 267
 268 /* we may include files below only after all above definitions */
 269 #include <asm/arch/hardware.h>
 270 #include <asm/arch/clock.h>
 271 #ifndef CONFIG_SOC_K2G
 272 #define CONFIG_SYS_HZ_CLOCK             ks_clk_get_rate(KS2_CLK1_6)
 273 #else
 274 #define CONFIG_SYS_HZ_CLOCK             get_external_clk(sys_clk)
 275 #endif
 276
 277 #endif /* __CONFIG_KS2_EVM_H */