Merge branch 'next'
[platform/kernel/u-boot.git] / include / configs / ti816x_evm.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * ti816x_evm.h
4  *
5  * Copyright (C) 2013, Adeneo Embedded <www.adeneo-embedded.com>
6  * Antoine Tenart, <atenart@adeneo-embedded.com>
7  */
8
9 #ifndef __CONFIG_TI816X_EVM_H
10 #define __CONFIG_TI816X_EVM_H
11
12 #include <configs/ti_armv7_omap.h>
13 #include <asm/arch/omap.h>
14
15 #define CONFIG_MACH_TYPE                MACH_TYPE_TI8168EVM
16
17 #define CONFIG_EXTRA_ENV_SETTINGS       \
18         DEFAULT_LINUX_BOOT_ENV \
19         "mtdids=" CONFIG_MTDIDS_DEFAULT "\0" \
20         "mtdparts=" CONFIG_MTDPARTS_DEFAULT "\0" \
21
22 #define CONFIG_BOOTCOMMAND                      \
23         "mmc rescan;"                           \
24         "fatload mmc 0 ${loadaddr} uImage;"     \
25         "bootm ${loadaddr}"                     \
26
27 /* Clock Defines */
28 #define V_OSCK          24000000    /* Clock output from T2 */
29 #define V_SCLK          (V_OSCK >> 1)
30
31 #define CONFIG_MAX_RAM_BANK_SIZE        (2048 << 20)    /* 2048MB */
32 #define CONFIG_SYS_SDRAM_BASE           0x80000000
33
34 /**
35  * Platform/Board specific defs
36  */
37 #define CONFIG_SYS_CLK_FREQ     27000000
38 #define CONFIG_SYS_TIMERBASE    0x4802E000
39 #define CONFIG_SYS_PTV          2   /* Divisor: 2^(PTV+1) => 8 */
40
41 /*
42  * NS16550 Configuration
43  */
44 #define CONFIG_SYS_NS16550_SERIAL
45 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
46 #define CONFIG_SYS_NS16550_CLK      (48000000)
47 #define CONFIG_SYS_NS16550_COM1     0x48024000  /* Base EVM has UART2 */
48
49 /* allow overwriting serial config and ethaddr */
50 #define CONFIG_ENV_OVERWRITE
51
52
53 /*
54  * GPMC NAND block.  We support 1 device and the physical address to
55  * access CS0 at is 0x8000000.
56  */
57 #define CONFIG_SYS_NAND_BASE            0x8000000
58 #define CONFIG_SYS_MAX_NAND_DEVICE      1
59
60 /* NAND: SPL related configs */
61
62 /* NAND: device related configs */
63 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
64 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
65                                          CONFIG_SYS_NAND_PAGE_SIZE)
66 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
67 #define CONFIG_SYS_NAND_OOBSIZE         64
68 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
69 /* NAND: driver related configs */
70 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
71 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
72                                          10, 11, 12, 13, 14, 15, 16, 17, \
73                                          18, 19, 20, 21, 22, 23, 24, 25, \
74                                          26, 27, 28, 29, 30, 31, 32, 33, \
75                                          34, 35, 36, 37, 38, 39, 40, 41, \
76                                          42, 43, 44, 45, 46, 47, 48, 49, \
77                                          50, 51, 52, 53, 54, 55, 56, 57, }
78
79 #define CONFIG_SYS_NAND_ECCSIZE         512
80 #define CONFIG_SYS_NAND_ECCBYTES        14
81 #define CONFIG_SYS_NAND_ONFI_DETECTION
82 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
83 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x000c0000
84 #define CONFIG_SYS_ENV_SECT_SIZE        CONFIG_SYS_NAND_BLOCK_SIZE
85
86 /* SPL */
87 /* Defines for SPL */
88 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
89                                          CONFIG_SPL_TEXT_BASE)
90
91 #define CONFIG_BOOTP_SEND_HOSTNAME
92 #define CONFIG_NET_RETRY_COUNT  10
93
94 /* Since SPL did pll and ddr initialization for us,
95  * we don't need to do it twice.
96  */
97 #ifndef CONFIG_SPL_BUILD
98 #define CONFIG_SKIP_LOWLEVEL_INIT
99 #endif
100
101 /*
102  * Disable MMC DM for SPL build and can be re-enabled after adding
103  * DM support in SPL
104  */
105 #ifdef CONFIG_SPL_BUILD
106 #undef CONFIG_DM_MMC
107 #undef CONFIG_TIMER
108 #endif
109 #endif