include/configs/tbs2910.h

   1 /*
   2  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   3  *
   4  * Configuration settings for the TBS2910 MatrixARM board.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __TBS2910_CONFIG_H
  10 #define __TBS2910_CONFIG_H
  11
  12 #include "mx6_common.h"
  13 #include <asm/arch/imx-regs.h>
  14 #include <asm/imx-common/gpio.h>
  15
  16 /* General configuration */
  17 #define CONFIG_MX6
  18 #define CONFIG_DISPLAY_CPUINFO
  19 #define CONFIG_DISPLAY_BOARDINFO_LATE
  20 #define CONFIG_SYS_THUMB_BUILD
  21
  22 #define CONFIG_MACH_TYPE                3980
  23
  24 #define CONFIG_CMDLINE_TAG
  25 #define CONFIG_SETUP_MEMORY_TAGS
  26 #define CONFIG_INITRD_TAG
  27 #define CONFIG_REVISION_TAG
  28 #define CONFIG_SYS_GENERIC_BOARD
  29
  30 #define CONFIG_BOARD_EARLY_INIT_F
  31 #define CONFIG_MXC_GPIO
  32 #define CONFIG_CMD_GPIO
  33
  34 #define CONFIG_SYS_LONGHELP
  35 #define CONFIG_SYS_HUSH_PARSER
  36 #define CONFIG_SYS_PROMPT               "Matrix U-Boot> "
  37 #define CONFIG_BOOTDELAY                3
  38 #define CONFIG_AUTO_COMPLETE
  39 #define CONFIG_CMDLINE_EDITING
  40 #define CONFIG_SYS_MAXARGS              16
  41 #define CONFIG_SYS_CBSIZE               1024
  42 #define CONFIG_SYS_HZ                   1000
  43
  44 /* Physical Memory Map */
  45 #define CONFIG_NR_DRAM_BANKS            1
  46 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  47
  48 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  49 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  50 #define CONFIG_SYS_INIT_SP_OFFSET \
  51         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  52 #define CONFIG_SYS_INIT_SP_ADDR \
  53         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  54
  55 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  56
  57 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  58 #define CONFIG_SYS_MEMTEST_END \
  59         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  60
  61 #define CONFIG_SYS_TEXT_BASE            0x80000000
  62 #define CONFIG_SYS_BOOTMAPSZ            0x6C000000
  63 #define CONFIG_SYS_LOAD_ADDR            0x10800000
  64
  65 /* Serial console */
  66 #define CONFIG_MXC_UART
  67 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  68 #define CONFIG_BAUDRATE                 115200
  69
  70 #define CONFIG_SYS_CONSOLE_IS_IN_ENV
  71 #define CONFIG_CONSOLE_MUX
  72 #define CONFIG_CONS_INDEX               1
  73
  74 /* *** Command definition *** */
  75 #include <config_cmd_default.h>
  76
  77 #undef CONFIG_CMD_IMLS
  78
  79 #define CONFIG_CMD_BMODE
  80 #define CONFIG_CMD_SETEXPR
  81 #define CONFIG_CMD_MEMTEST
  82 #define CONFIG_CMD_TIME
  83
  84 /* Filesystems / image support */
  85 #define CONFIG_CMD_EXT4
  86 #define CONFIG_CMD_FAT
  87 #define CONFIG_DOS_PARTITION
  88 #define CONFIG_EFI_PARTITION
  89 #define CONFIG_CMD_FS_GENERIC
  90
  91 #define CONFIG_OF_LIBFDT
  92 #define CONFIG_CMD_BOOTZ
  93 #define CONFIG_SUPPORT_RAW_INITRD
  94 #define CONFIG_FIT
  95
  96 /* MMC */
  97 #define CONFIG_FSL_ESDHC
  98 #define CONFIG_FSL_USDHC
  99 #define CONFIG_SYS_FSL_USDHC_NUM        3
 100 #define CONFIG_SYS_FSL_ESDHC_ADDR       USDHC4_BASE_ADDR
 101
 102 #define CONFIG_MMC
 103 #define CONFIG_CMD_MMC
 104 #define CONFIG_GENERIC_MMC
 105 #define CONFIG_SUPPORT_EMMC_BOOT
 106 #define CONFIG_BOUNCE_BUFFER
 107
 108 /* Ethernet */
 109 #define CONFIG_FEC_MXC
 110 #define CONFIG_CMD_PING
 111 #define CONFIG_CMD_DHCP
 112 #define CONFIG_CMD_MII
 113 #define CONFIG_CMD_NET
 114 #define CONFIG_FEC_MXC
 115 #define CONFIG_MII
 116 #define IMX_FEC_BASE                    ENET_BASE_ADDR
 117 #define CONFIG_FEC_XCV_TYPE             RGMII
 118 #define CONFIG_ETHPRIME                 "FEC"
 119 #define CONFIG_FEC_MXC_PHYADDR          4
 120 #define CONFIG_PHYLIB
 121 #define CONFIG_PHY_ATHEROS
 122
 123 /* Framebuffer */
 124 #define CONFIG_VIDEO
 125 #ifdef CONFIG_VIDEO
 126 #define CONFIG_VIDEO_IPUV3
 127 #define CONFIG_IPUV3_CLK                260000000
 128 #define CONFIG_CFB_CONSOLE
 129 #define CONFIG_CFB_CONSOLE_ANSI
 130 #define CONFIG_VIDEO_SW_CURSOR
 131 #define CONFIG_VGA_AS_SINGLE_DEVICE
 132 #define CONFIG_VIDEO_BMP_RLE8
 133 #define CONFIG_IMX_HDMI
 134 #define CONFIG_IMX_VIDEO_SKIP
 135 #define CONFIG_CMD_HDMIDETECT
 136 #endif
 137
 138 /* PCI */
 139 #define CONFIG_CMD_PCI
 140 #ifdef CONFIG_CMD_PCI
 141 #define CONFIG_PCI
 142 #define CONFIG_PCI_PNP
 143 #define CONFIG_PCI_SCAN_SHOW
 144 #define CONFIG_PCIE_IMX
 145 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
 146 #endif
 147
 148 /* SATA */
 149 #define CONFIG_CMD_SATA
 150 #ifdef CONFIG_CMD_SATA
 151 #define CONFIG_DWC_AHSATA
 152 #define CONFIG_SYS_SATA_MAX_DEVICE      1
 153 #define CONFIG_DWC_AHSATA_PORT_ID       0
 154 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
 155 #define CONFIG_LBA48
 156 #define CONFIG_LIBATA
 157 #endif
 158
 159 /* USB */
 160 #define CONFIG_CMD_USB
 161 #ifdef CONFIG_CMD_USB
 162 #define CONFIG_USB_EHCI
 163 #define CONFIG_USB_EHCI_MX6
 164 #define CONFIG_USB_MAX_CONTROLLER_COUNT 2
 165 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
 166 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
 167 #define CONFIG_USB_STORAGE
 168 #define CONFIG_CMD_USB_MASS_STORAGE
 169 #ifdef CONFIG_CMD_USB_MASS_STORAGE
 170 #define CONFIG_CI_UDC
 171 #define CONFIG_USBD_HS
 172 #define CONFIG_USB_GADGET
 173 #define CONFIG_USB_GADGET_MASS_STORAGE
 174 #define CONFIG_USB_GADGET_DUALSPEED
 175 #define CONFIG_USB_GADGET_VBUS_DRAW     0
 176 #define CONFIG_USBDOWNLOAD_GADGET
 177 #define CONFIG_G_DNL_VENDOR_NUM         0x0525
 178 #define CONFIG_G_DNL_PRODUCT_NUM        0xa4a5
 179 #define CONFIG_G_DNL_MANUFACTURER       "TBS"
 180 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
 181 #define CONFIG_USB_KEYBOARD
 182 #ifdef CONFIG_USB_KEYBOARD
 183 #define CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE
 184 #define CONFIG_SYS_STDIO_DEREGISTER
 185 #define CONFIG_PREBOOT \
 186         "if hdmidet; then " \
 187                 "usb start; " \
 188                 "run set_con_usb_hdmi; " \
 189         "else " \
 190                 "run set_con_serial; " \
 191         "fi;"
 192 #endif /* CONFIG_USB_KEYBOARD */
 193 #endif /* CONFIG_CMD_USB      */
 194
 195 /* RTC */
 196 #define CONFIG_CMD_DATE
 197 #ifdef CONFIG_CMD_DATE
 198 #define CONFIG_CMD_I2C
 199 #define CONFIG_RTC_DS1307
 200 #define CONFIG_SYS_RTC_BUS_NUM          2
 201 #endif
 202
 203 /* I2C */
 204 #define CONFIG_CMD_I2C
 205 #ifdef CONFIG_CMD_I2C
 206 #define CONFIG_SYS_I2C
 207 #define CONFIG_SYS_I2C_MXC
 208 #define CONFIG_SYS_I2C_MXC_I2C3         /* enable I2C bus 3 */
 209 #define CONFIG_SYS_I2C_SPEED            100000
 210 #define CONFIG_I2C_EDID
 211 #endif
 212
 213 /* Fuses */
 214 #define CONFIG_CMD_FUSE
 215 #ifdef CONFIG_CMD_FUSE
 216 #define CONFIG_MXC_OCOTP
 217 #endif
 218
 219 #ifndef CONFIG_SYS_DCACHE_OFF
 220 #define CONFIG_CMD_CACHE
 221 #endif
 222
 223 /* Flash and environment organization */
 224 #define CONFIG_SYS_NO_FLASH
 225
 226 #define CONFIG_ENV_IS_IN_MMC
 227 #define CONFIG_SYS_MMC_ENV_DEV          2
 228 #define CONFIG_SYS_MMC_ENV_PART         1
 229 #define CONFIG_ENV_SIZE                 (8 * 1024)
 230 #define CONFIG_ENV_OFFSET               (384 * 1024)
 231 #define CONFIG_ENV_OVERWRITE
 232
 233 #define CONFIG_EXTRA_ENV_SETTINGS \
 234         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
 235         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
 236                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
 237         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
 238         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
 239                         "${bootargs_mmc3}\0" \
 240         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
 241                         "rdinit=/sbin/init enable_wait_mode=off\0" \
 242         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
 243                         "mmc read 0x10800000 0x800 0x4000; bootm\0" \
 244         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
 245         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
 246                         "run bootargs_upd; " \
 247                         "bootm 0x10800000 0x10d00000\0" \
 248         "console=ttymxc0\0" \
 249         "fan=gpio set 92\0" \
 250         "set_con_serial=setenv stdin serial; " \
 251                         "setenv stdout serial; " \
 252                         "setenv stderr serial;\0" \
 253         "set_con_usb_hdmi=setenv stdin serial,usbkbd; " \
 254                         "setenv stdout serial,vga; " \
 255                         "setenv stderr serial,vga;\0"
 256
 257 #define CONFIG_BOOTCOMMAND \
 258         "mmc rescan; " \
 259         "if run bootcmd_up1; then " \
 260                 "run bootcmd_up2; " \
 261         "else " \
 262                 "run bootcmd_mmc; " \
 263         "fi"
 264
 265 #endif                         /* __TBS2910_CONFIG_H * */