include/configs/tbs2910.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2014 Soeren Moch <smoch@web.de>
   4  *
   5  * Configuration settings for the TBS2910 MatrixARM board.
   6  */
   7
   8 #ifndef __TBS2910_CONFIG_H
   9 #define __TBS2910_CONFIG_H
  10
  11 #include "mx6_common.h"
  12
  13 /* General configuration */
  14
  15 #define CONFIG_MACH_TYPE                3980
  16
  17 #define CONFIG_SYS_HZ                   1000
  18
  19 #define CONFIG_IMX_THERMAL
  20
  21 /* Physical Memory Map */
  22 #define CONFIG_SYS_SDRAM_BASE           MMDC0_ARB_BASE_ADDR
  23
  24 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  25 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  26 #define CONFIG_SYS_INIT_SP_OFFSET \
  27         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  28 #define CONFIG_SYS_INIT_SP_ADDR \
  29         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  30
  31 #define CONFIG_SYS_MALLOC_LEN           (128 * 1024 * 1024)
  32
  33 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  34 #define CONFIG_SYS_MEMTEST_END \
  35         (CONFIG_SYS_MEMTEST_START + 500 * 1024 * 1024)
  36
  37 #define CONFIG_SYS_BOOTMAPSZ            0x10000000
  38
  39 /* Serial console */
  40 #define CONFIG_MXC_UART
  41 #define CONFIG_MXC_UART_BASE            UART1_BASE /* select UART1/UART2 */
  42
  43 /* Framebuffer */
  44 #ifdef CONFIG_VIDEO
  45 #define CONFIG_VIDEO_BMP_RLE8
  46 #define CONFIG_IMX_HDMI
  47 #define CONFIG_IMX_VIDEO_SKIP
  48 #endif
  49
  50 /* PCI */
  51 #ifdef CONFIG_CMD_PCI
  52 #define CONFIG_PCI_SCAN_SHOW
  53 #define CONFIG_PCIE_IMX
  54 #define CONFIG_PCIE_IMX_PERST_GPIO      IMX_GPIO_NR(7, 12)
  55 #endif
  56
  57 /* SATA */
  58 #ifdef CONFIG_CMD_SATA
  59 #define CONFIG_SYS_SATA_MAX_DEVICE      1
  60 #define CONFIG_DWC_AHSATA_PORT_ID       0
  61 #define CONFIG_DWC_AHSATA_BASE_ADDR     SATA_ARB_BASE_ADDR
  62 #define CONFIG_LBA48
  63 #define CONFIG_SYS_64BIT_LBA
  64 #endif
  65
  66 /* USB */
  67 #ifdef CONFIG_CMD_USB
  68 #define CONFIG_EHCI_HCD_INIT_AFTER_RESET
  69 #define CONFIG_MXC_USB_PORTSC           (PORT_PTS_UTMI | PORT_PTS_PTW)
  70 #ifdef CONFIG_CMD_USB_MASS_STORAGE
  71 #define CONFIG_USBD_HS
  72 #endif /* CONFIG_CMD_USB_MASS_STORAGE */
  73 #endif /* CONFIG_CMD_USB      */
  74
  75 /* Environment organization */
  76 #define CONFIG_SYS_MMC_ENV_DEV          2 /* overwritten on SD boot */
  77 #define CONFIG_SYS_MMC_ENV_PART         1 /* overwritten on SD boot */
  78 #define CONFIG_ENV_SIZE                 (8 * 1024)
  79 #define CONFIG_ENV_OFFSET               (384 * 1024)
  80 #define CONFIG_ENV_OVERWRITE
  81
  82 #define CONFIG_BOARD_SIZE_LIMIT         392192 /* (CONFIG_ENV_OFFSET - 1024) */
  83
  84 #define CONFIG_EXTRA_ENV_SETTINGS \
  85         "bootargs_mmc1=console=ttymxc0,115200 di0_primary console=tty1\0" \
  86         "bootargs_mmc2=video=mxcfb0:dev=hdmi,1920x1080M@60 " \
  87                         "video=mxcfb1:off video=mxcfb2:off fbmem=28M\0" \
  88         "bootargs_mmc3=root=/dev/mmcblk0p1 rootwait consoleblank=0 quiet\0" \
  89         "bootargs_mmc=setenv bootargs ${bootargs_mmc1} ${bootargs_mmc2} " \
  90                         "${bootargs_mmc3}\0" \
  91         "bootargs_upd=setenv bootargs console=ttymxc0,115200 " \
  92                         "rdinit=/sbin/init enable_wait_mode=off\0" \
  93         "bootcmd_mmc=run bootargs_mmc; mmc dev 2; " \
  94                         "mmc read 0x10800000 0x800 0x4000; bootm 0x10800000\0" \
  95         "bootcmd_up1=load mmc 1 0x10800000 uImage\0" \
  96         "bootcmd_up2=load mmc 1 0x10d00000 uramdisk.img; " \
  97                         "run bootargs_upd; " \
  98                         "bootm 0x10800000 0x10d00000\0" \
  99         "console=ttymxc0\0" \
 100         "fan=gpio set 92\0" \
 101         "set_con_serial=setenv stdout serial; " \
 102                         "setenv stderr serial\0" \
 103         "set_con_hdmi=setenv stdout serial,vga; " \
 104                         "setenv stderr serial,vga\0" \
 105         "stderr=serial,vga\0" \
 106         "stdin=serial,usbkbd\0" \
 107         "stdout=serial,vga\0"
 108
 109 #define CONFIG_BOOTCOMMAND \
 110         "mmc rescan; " \
 111         "if run bootcmd_up1; then " \
 112                 "run bootcmd_up2; " \
 113         "else " \
 114                 "run bootcmd_mmc; " \
 115         "fi"
 116
 117 #endif                         /* __TBS2910_CONFIG_H * */