include/configs/tao3530.h

   1 /*
   2  * Configuration settings for the TechNexion TAO-3530 SOM
   3  * equipped on Thunder baseboard.
   4  *
   5  * Edward Lin <linuxfae@technexion.com>
   6  * Tapani Utriainen <linuxfae@technexion.com>
   7  *
   8  * Copyright (C) 2013 Stefan Roese <sr@denx.de>
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 /*
  17  * High Level Configuration Options
  18  */
  19 #define CONFIG_OMAP                     /* in a TI OMAP core */
  20
  21 #define CONFIG_OMAP_GPIO
  22 /* Common ARM Erratas */
  23 #define CONFIG_ARM_ERRATA_454179
  24 #define CONFIG_ARM_ERRATA_430973
  25 #define CONFIG_ARM_ERRATA_621766
  26
  27 #define MACH_TYPE_OMAP3_TAO3530         2836
  28
  29 #define CONFIG_SDRC                     /* Has an SDRC controller */
  30
  31 #include <asm/arch/cpu.h>               /* get chip and board defs */
  32 #include <asm/arch/omap.h>
  33
  34 /* Clock Defines */
  35 #define V_OSCK                  26000000        /* Clock output from T2 */
  36 #define V_SCLK                  (V_OSCK >> 1)
  37
  38 #define CONFIG_MISC_INIT_R
  39
  40 #define CONFIG_CMDLINE_TAG
  41 #define CONFIG_SETUP_MEMORY_TAGS
  42 #define CONFIG_INITRD_TAG
  43 #define CONFIG_REVISION_TAG
  44
  45 /*
  46  * Size of malloc() pool
  47  */
  48 #define CONFIG_SYS_MALLOC_LEN           (4 << 20)
  49 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB sector */
  50
  51 /*
  52  * Hardware drivers
  53  */
  54
  55 /*
  56  * NS16550 Configuration
  57  */
  58 #define V_NS16550_CLK                   48000000        /* 48MHz (APLL96/2) */
  59
  60 #define CONFIG_SYS_NS16550_SERIAL
  61 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  62 #define CONFIG_SYS_NS16550_CLK          V_NS16550_CLK
  63
  64 /*
  65  * select serial console configuration
  66  */
  67 #define CONFIG_CONS_INDEX               3
  68 #define CONFIG_SYS_NS16550_COM3         OMAP34XX_UART3
  69
  70 /* allow to overwrite serial and ethaddr */
  71 #define CONFIG_ENV_OVERWRITE
  72 #define CONFIG_BAUDRATE                 115200
  73 #define CONFIG_GENERIC_MMC
  74 #define CONFIG_DOS_PARTITION
  75
  76 /* GPIO banks */
  77 #define CONFIG_OMAP3_GPIO_2             /* GPIO32 ..63  is in GPIO bank 2 */
  78 #define CONFIG_OMAP3_GPIO_3             /* GPIO64 ..95  is in GPIO bank 3 */
  79 #define CONFIG_OMAP3_GPIO_4             /* GPIO96 ..127 is in GPIO bank 4 */
  80 #define CONFIG_OMAP3_GPIO_5             /* GPIO128..159 is in GPIO bank 5 */
  81 #define CONFIG_OMAP3_GPIO_6             /* GPIO160..191 is in GPIO bank 6 */
  82
  83 /* commands to include */
  84 #define CONFIG_CMD_MTDPARTS     /* Enable MTD parts commands */
  85 #define CONFIG_MTD_DEVICE       /* needed for mtdparts commands */
  86 #define MTDIDS_DEFAULT                  "nand0=nand"
  87 #define MTDPARTS_DEFAULT                "mtdparts=nand:512k(x-loader),"\
  88                                         "1920k(u-boot),128k(u-boot-env),"\
  89                                         "4m(kernel),-(fs)"
  90
  91 #define CONFIG_CMD_NAND         /* NAND support                 */
  92
  93 #define CONFIG_SYS_NO_FLASH
  94 #define CONFIG_SYS_I2C
  95 #define CONFIG_SYS_I2C_OMAP34XX
  96 #define CONFIG_SYS_OMAP24_I2C_SPEED     100000
  97 #define CONFIG_SYS_OMAP24_I2C_SLAVE     1
  98 #define CONFIG_I2C_MULTI_BUS
  99
 100 /*
 101  * TWL4030
 102  */
 103 #define CONFIG_TWL4030_POWER
 104 #define CONFIG_TWL4030_LED
 105
 106 /*
 107  * Board NAND Info.
 108  */
 109 #define CONFIG_NAND_OMAP_GPMC
 110 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
 111                                                         /* to access nand */
 112 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
 113                                                         /* to access nand at */
 114                                                         /* CS0 */
 115
 116 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND */
 117                                                         /* devices */
 118 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
 119 /* Environment information */
 120
 121 #define CONFIG_EXTRA_ENV_SETTINGS \
 122         "loadaddr=0x82000000\0" \
 123         "console=ttyO2,115200n8\0" \
 124         "mpurate=600\0" \
 125         "dvi_mode=omapfb.mode=dvi:1280x720-24@60\0" \
 126         "tv_mode=omapfb.mode=tv:ntsc\0" \
 127         "video_mode=omapdss.def_disp=lcd vram=6M omapfb.vram=0:2M,1:2M,2:2M\0" \
 128         "lcd_mode=omapfb.mode=lcd:800x480@60 \0" \
 129         "extra_options= \0" \
 130         "mmcdev=0\0" \
 131         "mmcroot=/dev/mmcblk0p2 rw\0" \
 132         "mmcrootfstype=ext3 rootwait\0" \
 133         "nandroot=ubi0:rootfs ubi.mtd=4\0" \
 134         "nandrootfstype=ubifs\0" \
 135         "mmcargs=setenv bootargs console=${console} " \
 136                 "mpurate=${mpurate} " \
 137                 "${video_mode} " \
 138                 "root=${mmcroot} " \
 139                 "rootfstype=${mmcrootfstype} " \
 140                 "${extra_options}\0" \
 141         "nandargs=setenv bootargs console=${console} " \
 142                 "mpurate=${mpurate} " \
 143                 "${video_mode} " \
 144                 "${network_setting} " \
 145                 "root=${nandroot} " \
 146                 "rootfstype=${nandrootfstype} "\
 147                 "${extra_options}\0" \
 148         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 149         "bootscript=echo Running bootscript from mmc ...; " \
 150                 "source ${loadaddr}\0" \
 151         "loaduimage=fatload mmc ${mmcdev} ${loadaddr} uImage\0" \
 152         "mmcboot=echo Booting from mmc ...; " \
 153                 "run mmcargs; " \
 154                 "bootm ${loadaddr}\0" \
 155         "nandboot=echo Booting from nand ...; " \
 156                 "run nandargs; " \
 157                 "nand read ${loadaddr} 280000 400000; " \
 158                 "bootm ${loadaddr}\0" \
 159
 160 #define CONFIG_BOOTCOMMAND \
 161         "if mmc rescan ${mmcdev}; then " \
 162                 "if run loadbootscript; then " \
 163                         "run bootscript; " \
 164                 "else " \
 165                         "if run loaduimage; then " \
 166                                 "run mmcboot; " \
 167                         "else run nandboot; " \
 168                         "fi; " \
 169                 "fi; " \
 170         "else run nandboot; fi"
 171
 172 /*
 173  * Miscellaneous configurable options
 174  */
 175 #define CONFIG_SYS_LONGHELP             /* undef to save memory */
 176 #define CONFIG_SYS_CBSIZE               256     /* Console I/O Buffer Size */
 177
 178 /* turn on command-line edit/hist/auto */
 179 #define CONFIG_CMDLINE_EDITING
 180 #define CONFIG_COMMAND_HISTORY
 181 #define CONFIG_AUTO_COMPLETE
 182
 183 /* Print Buffer Size */
 184 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
 185                                         sizeof(CONFIG_SYS_PROMPT) + 16)
 186 #define CONFIG_SYS_MAXARGS              16      /* max number of command args */
 187 /* Boot Argument Buffer Size */
 188 #define CONFIG_SYS_BARGSIZE             (CONFIG_SYS_CBSIZE)
 189
 190 #define CONFIG_SYS_ALT_MEMTEST          1
 191 #define CONFIG_SYS_MEMTEST_START        (0x82000000)            /* memtest */
 192                                                                 /* defaults */
 193 #define CONFIG_SYS_MEMTEST_END          (0x83FFFFFF)            /* 64MB */
 194 #define CONFIG_SYS_MEMTEST_SCRATCH      (0x81000000)    /* dummy address */
 195
 196 #define CONFIG_SYS_LOAD_ADDR            (OMAP34XX_SDRC_CS0)     /* default */
 197                                                         /* load address */
 198 #define CONFIG_SYS_TEXT_BASE            0x80008000
 199
 200 /*
 201  * OMAP3 has 12 GP timers, they can be driven by the system clock
 202  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
 203  * This rate is divided by a local divisor.
 204  */
 205 #define CONFIG_SYS_TIMERBASE            (OMAP34XX_GPT2)
 206 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
 207
 208 /*
 209  * Stack sizes
 210  *
 211  * The stack sizes are set up in start.S using the settings below
 212  */
 213 #define CONFIG_STACKSIZE        (128 << 10)     /* regular stack 128 KiB */
 214
 215 /*
 216  * Physical Memory Map
 217  */
 218 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
 219 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
 220 #define PHYS_SDRAM_1_SIZE       (32 << 20)      /* at least 32 MiB */
 221 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
 222
 223 /*
 224  * FLASH and environment organization
 225  */
 226
 227 /* **** PISMO SUPPORT *** */
 228 #define CONFIG_SYS_MONITOR_LEN          (256 << 10)     /* Reserve 2 sectors */
 229 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 230
 231 /* Monitor at start of flash */
 232 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 233 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 234
 235 #define CONFIG_ENV_IS_IN_NAND           1
 236 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 237 #define SMNAND_ENV_OFFSET               0x260000 /* environment starts here */
 238
 239 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)
 240 #define CONFIG_ENV_OFFSET               SMNAND_ENV_OFFSET
 241 #define CONFIG_ENV_ADDR                 CONFIG_ENV_OFFSET
 242
 243 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
 244 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
 245 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
 246 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
 247                                          CONFIG_SYS_INIT_RAM_SIZE - \
 248                                          GENERATED_GBL_DATA_SIZE)
 249
 250 #define CONFIG_OMAP3_SPI
 251
 252 /*
 253  * USB
 254  *
 255  * Currently only EHCI is enabled, the MUSB OTG controller
 256  * is not enabled.
 257  */
 258
 259 /* USB EHCI */
 260 #define CONFIG_USB_EHCI
 261 #define CONFIG_USB_EHCI_OMAP
 262 #define CONFIG_OMAP_EHCI_PHY1_RESET_GPIO        162
 263
 264 #define CONFIG_SYS_USB_EHCI_MAX_ROOT_PORTS 3
 265 #define CONFIG_USB_HOST_ETHER
 266 #define CONFIG_USB_ETHER_SMSC95XX
 267
 268 #define CONFIG_USB_ETHER
 269 #define CONFIG_USB_ETHER_RNDIS
 270 #define CONGIG_CMD_STORAGE
 271
 272 /* Defines for SPL */
 273 #define CONFIG_SPL_FRAMEWORK
 274 #define CONFIG_SPL_NAND_SIMPLE
 275
 276 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
 277 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
 278
 279 #define CONFIG_SPL_BOARD_INIT
 280 #define CONFIG_SPL_NAND_BASE
 281 #define CONFIG_SPL_NAND_DRIVERS
 282 #define CONFIG_SPL_NAND_ECC
 283 #define CONFIG_SPL_OMAP3_ID_NAND
 284 #define CONFIG_SPL_LDSCRIPT             "arch/arm/mach-omap2/u-boot-spl.lds"
 285
 286 /* NAND boot config */
 287 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 288 #define CONFIG_SYS_NAND_PAGE_COUNT      64
 289 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
 290 #define CONFIG_SYS_NAND_OOBSIZE         64
 291 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128 * 1024)
 292 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
 293 /*
 294  * Use the ECC/OOB layout from omap_gpmc.h that matches your chip:
 295  * SP vs LP, 8bit vs 16bit: GPMC_NAND_HW_ECC_LAYOUT
 296  */
 297 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
 298                                          10, 11, 12, 13 }
 299 #define CONFIG_SYS_NAND_ECCSIZE         512
 300 #define CONFIG_SYS_NAND_ECCBYTES        3
 301 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_HW
 302
 303 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 304 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 305
 306 #define CONFIG_SPL_TEXT_BASE            0x40200800
 307 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 308                                          CONFIG_SPL_TEXT_BASE)
 309
 310 /*
 311  * Use 0x80008000 as TEXT_BASE here for compatibility reasons with the
 312  * older x-loader implementations. And move the BSS area so that it
 313  * doesn't overlap with TEXT_BASE.
 314  */
 315 #define CONFIG_SYS_TEXT_BASE            0x80008000
 316 #define CONFIG_SPL_BSS_START_ADDR       0x80100000
 317 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
 318
 319 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 320 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 321
 322 #endif /* __CONFIG_H */