include/configs/tam3517-common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2011
   4  * Stefano Babic, DENX Software Engineering, sbabic@denx.de.
   5  *
   6  * Copyright (C) 2009 TechNexion Ltd.
   7  */
   8
   9 #ifndef __TAM3517_H
  10 #define __TAM3517_H
  11
  12 /*
  13  * High Level Configuration Options
  14  */
  15
  16 #include <asm/arch/cpu.h>               /* get chip and board defs */
  17 #include <asm/arch/omap.h>
  18
  19 /* Clock Defines */
  20 #define V_OSCK                  26000000        /* Clock output from T2 */
  21 #define V_SCLK                  (V_OSCK >> 1)
  22
  23 /*
  24  * DDR related
  25  */
  26 #define CONFIG_SYS_CS0_SIZE             (256 * 1024 * 1024)
  27
  28 /*
  29  * Hardware drivers
  30  */
  31
  32 /*
  33  * NS16550 Configuration
  34  */
  35 #define CONFIG_SYS_NS16550_SERIAL
  36 #define CONFIG_SYS_NS16550_REG_SIZE     (-4)
  37 #define CONFIG_SYS_NS16550_CLK          48000000        /* 48MHz (APLL96/2) */
  38
  39 /*
  40  * select serial console configuration
  41  */
  42 #define CONFIG_SYS_NS16550_COM1         OMAP34XX_UART1
  43
  44 #define CONFIG_SYS_BAUDRATE_TABLE       {4800, 9600, 19200, 38400, 57600,\
  45                                         115200}
  46
  47 #define CONFIG_SYS_I2C_EEPROM_ADDR_OVERFLOW     0x07
  48
  49 /*
  50  * Board NAND Info.
  51  */
  52 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
  53                                                         /* to access */
  54                                                         /* nand at CS0 */
  55
  56 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of */
  57                                                         /* NAND devices */
  58
  59 /*
  60  * Miscellaneous configurable options
  61  */
  62 #define CONFIG_SYS_CBSIZE               512     /* Console I/O Buffer Size */
  63
  64 #define CONFIG_SYS_MAXARGS              32      /* max number of command */
  65                                                 /* args */
  66
  67 /*
  68  * AM3517 has 12 GP timers, they can be driven by the system clock
  69  * (12/13/16.8/19.2/38.4MHz) or by 32KHz clock. We use 13MHz (V_SCLK).
  70  * This rate is divided by a local divisor.
  71  */
  72 #define CONFIG_SYS_TIMERBASE            OMAP34XX_GPT2
  73 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
  74
  75 /*
  76  * Physical Memory Map
  77  */
  78 #define PHYS_SDRAM_1            OMAP34XX_SDRC_CS0
  79 #define PHYS_SDRAM_2            OMAP34XX_SDRC_CS1
  80
  81 /*
  82  * FLASH and environment organization
  83  */
  84
  85 /* **** PISMO SUPPORT *** */
  86
  87 /* Redundant Environment */
  88 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
  89
  90 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  91 #define CONFIG_SYS_INIT_RAM_ADDR        0x4020f800
  92 #define CONFIG_SYS_INIT_RAM_SIZE        0x800
  93 #define CONFIG_SYS_INIT_SP_ADDR         (CONFIG_SYS_INIT_RAM_ADDR + \
  94                                          CONFIG_SYS_INIT_RAM_SIZE - \
  95                                          GENERATED_GBL_DATA_SIZE)
  96
  97 /*
  98  * ethernet support, EMAC
  99  *
 100  */
 101 #define CONFIG_NET_RETRY_COUNT 10
 102
 103 /* Defines for SPL */
 104 #define CONFIG_SPL_CONSOLE
 105 #define CONFIG_SPL_NAND_SOFTECC
 106 #define CONFIG_SPL_NAND_WORKSPACE       0x8f07f000 /* below BSS */
 107
 108 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
 109                                          CONFIG_SPL_TEXT_BASE)
 110 #define CONFIG_SPL_STACK                LOW_LEVEL_SRAM_STACK
 111
 112 #define CONFIG_SYS_SPL_MALLOC_START     0x8f000000
 113 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x80000
 114 #define CONFIG_SPL_BSS_START_ADDR       0x8f080000 /* end of RAM */
 115 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000
 116
 117 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME         "u-boot.img"
 118
 119 /* FAT */
 120 #define CONFIG_SPL_FS_LOAD_KERNEL_NAME          "uImage"
 121 #define CONFIG_SPL_FS_LOAD_ARGS_NAME            "args"
 122
 123 /* RAW SD card / eMMC */
 124 #define CONFIG_SYS_MMCSD_RAW_MODE_KERNEL_SECTOR 0x900   /* address 0x120000 */
 125 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTOR   0x80    /* address 0x10000 */
 126 #define CONFIG_SYS_MMCSD_RAW_MODE_ARGS_SECTORS  0x80    /* 64KiB */
 127
 128 /* NAND boot config */
 129 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
 130 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   0
 131 #define CONFIG_SYS_NAND_ECCPOS          {40, 41, 42, 43, 44, 45, 46, 47,\
 132                                          48, 49, 50, 51, 52, 53, 54, 55,\
 133                                          56, 57, 58, 59, 60, 61, 62, 63}
 134 #define CONFIG_SYS_NAND_ECCSIZE         256
 135 #define CONFIG_SYS_NAND_ECCBYTES        3
 136 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_HAM1_CODE_SW
 137
 138 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 139
 140 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 141 #define CONFIG_SYS_NAND_U_BOOT_SIZE     0x80000
 142
 143 /* Setup MTD for NAND on the SOM */
 144
 145 #define CONFIG_TAM3517_SETTINGS                                         \
 146         "netdev=eth0\0"                                                 \
 147         "nandargs=setenv bootargs root=${nandroot} "                    \
 148                 "rootfstype=${nandrootfstype}\0"                        \
 149         "nfsargs=setenv bootargs root=/dev/nfs rw "                     \
 150                 "nfsroot=${serverip}:${rootpath}\0"                     \
 151         "ramargs=setenv bootargs root=/dev/ram rw\0"                    \
 152         "addip_sta=setenv bootargs ${bootargs} "                        \
 153                 "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}"      \
 154                 ":${hostname}:${netdev}:off panic=1\0"                  \
 155         "addip_dyn=setenv bootargs ${bootargs} ip=dhcp\0"               \
 156         "addip=if test -n ${ipdyn};then run addip_dyn;"                 \
 157                 "else run addip_sta;fi\0"                               \
 158         "addmtd=setenv bootargs ${bootargs} ${mtdparts}\0"              \
 159         "addtty=setenv bootargs ${bootargs}"                            \
 160                 " console=ttyO0,${baudrate}\0"                          \
 161         "addmisc=setenv bootargs ${bootargs} ${misc}\0"                 \
 162         "loadaddr=82000000\0"                                           \
 163         "kernel_addr_r=82000000\0"                                      \
 164         "hostname=" CONFIG_HOSTNAME "\0"                        \
 165         "bootfile=" CONFIG_HOSTNAME "/uImage\0"         \
 166         "flash_self=run ramargs addip addtty addmtd addmisc;"           \
 167                 "bootm ${kernel_addr} ${ramdisk_addr}\0"                \
 168         "flash_nfs=run nfsargs addip addtty addmtd addmisc;"            \
 169                 "bootm ${kernel_addr}\0"                                \
 170         "nandboot=run nandargs addip addtty addmtd addmisc;"            \
 171                 "nand read ${kernel_addr_r} kernel\0"                   \
 172                 "bootm ${kernel_addr_r}\0"                              \
 173         "net_nfs=tftp ${kernel_addr_r} ${bootfile}; "                   \
 174                 "run nfsargs addip addtty addmtd addmisc;"              \
 175                 "bootm ${kernel_addr_r}\0"                              \
 176         "net_self=if run net_self_load;then "                           \
 177                 "run ramargs addip addtty addmtd addmisc;"              \
 178                 "bootm ${kernel_addr_r} ${ramdisk_addr_r};"             \
 179                 "else echo Images not loades;fi\0"                      \
 180         "u-boot=" CONFIG_HOSTNAME "/u-boot.img\0"               \
 181         "load=tftp ${loadaddr} ${u-boot}\0"                             \
 182         "loadmlo=tftp ${loadaddr} ${mlo}\0"                             \
 183         "mlo=" CONFIG_HOSTNAME "/MLO\0"                 \
 184         "uboot_addr=0x80000\0"                                          \
 185         "update=nandecc sw;nand erase ${uboot_addr} 100000;"            \
 186                 "nand write ${loadaddr} ${uboot_addr} 80000\0"          \
 187         "updatemlo=nandecc hw;nand erase 0 20000;"                      \
 188                 "nand write ${loadaddr} 0 20000\0"                      \
 189         "upd=if run load;then echo Updating u-boot;if run update;"      \
 190                 "then echo U-Boot updated;"                             \
 191                         "else echo Error updating u-boot !;"            \
 192                         "echo Board without bootloader !!;"             \
 193                 "fi;"                                                   \
 194                 "else echo U-Boot not downloaded..exiting;fi\0"         \
 195
 196 /*
 197  * this is common code for all TAM3517 boards.
 198  * MAC address is stored from manufacturer in
 199  * I2C EEPROM
 200  */
 201 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
 202 /*
 203  * The I2C EEPROM on the TAM3517 contains
 204  * mac address and production data
 205  */
 206 struct tam3517_module_info {
 207         char customer[48];
 208         char product[48];
 209
 210         /*
 211          * bit 0~47  : sequence number
 212          * bit 48~55 : week of year, from 0.
 213          * bit 56~63 : year
 214          */
 215         unsigned long long sequence_number;
 216
 217         /*
 218          * bit 0~7   : revision fixed
 219          * bit 8~15  : revision major
 220          * bit 16~31 : TNxxx
 221          */
 222         unsigned int revision;
 223         unsigned char eth_addr[4][8];
 224         unsigned char _rev[100];
 225 };
 226
 227 #define TAM3517_READ_EEPROM(info, ret) \
 228 do {                                                            \
 229         i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE); \
 230         if (eeprom_read(CONFIG_SYS_I2C_EEPROM_ADDR, 0,          \
 231                 (void *)info, sizeof(*info)))                   \
 232                 ret = 1;                                        \
 233         else                                                    \
 234                 ret = 0;                                        \
 235 } while (0)
 236
 237 #define TAM3517_READ_MAC_FROM_EEPROM(info)                      \
 238 do {                                                            \
 239         char buf[80], ethname[20];                              \
 240         int i;                                                  \
 241         memset(buf, 0, sizeof(buf));                            \
 242         for (i = 0 ; i < ARRAY_SIZE((info)->eth_addr); i++) {   \
 243                 sprintf(buf, "%02X:%02X:%02X:%02X:%02X:%02X",   \
 244                         (info)->eth_addr[i][5],                 \
 245                         (info)->eth_addr[i][4],                 \
 246                         (info)->eth_addr[i][3],                 \
 247                         (info)->eth_addr[i][2],                 \
 248                         (info)->eth_addr[i][1],                 \
 249                         (info)->eth_addr[i][0]);                        \
 250                                                                 \
 251                 if (i)                                          \
 252                         sprintf(ethname, "eth%daddr", i);       \
 253                 else                                            \
 254                         strcpy(ethname, "ethaddr");             \
 255                 printf("Setting %s from EEPROM with %s\n", ethname, buf);\
 256                 env_set(ethname, buf);                          \
 257         }                                                       \
 258 } while (0)
 259
 260 /* The following macros are taken from Technexion's documentation */
 261 #define TAM3517_sequence_number(info) \
 262         ((info)->sequence_number % 0x1000000000000LL)
 263 #define TAM3517_week_of_year(info) (((info)->sequence_number >> 48) % 0x100)
 264 #define TAM3517_year(info) ((info)->sequence_number >> 56)
 265 #define TAM3517_revision_fixed(info) ((info)->revision % 0x100)
 266 #define TAM3517_revision_major(info) (((info)->revision >> 8) % 0x100)
 267 #define TAM3517_revision_tn(info) ((info)->revision >> 16)
 268
 269 #define TAM3517_PRINT_SOM_INFO(info)                            \
 270 do {                                                            \
 271         printf("Vendor:%s\n", (info)->customer);                \
 272         printf("SOM:   %s\n", (info)->product);                 \
 273         printf("SeqNr: %02llu%02llu%012llu\n",                  \
 274                 TAM3517_year(info),                             \
 275                 TAM3517_week_of_year(info),                     \
 276                 TAM3517_sequence_number(info));                 \
 277         printf("Rev:   TN%u %u.%u\n",                           \
 278                 TAM3517_revision_tn(info),                      \
 279                 TAM3517_revision_major(info),                   \
 280                 TAM3517_revision_fixed(info));                  \
 281 } while (0)
 282
 283 #endif
 284
 285 #endif /* __TAM3517_H */