include/configs/socfpga_mcvevk.h

   1 /*
   2  * Copyright (C) 2015 Marek Vasut <marex@denx.de>
   3  *
   4  * SPDX-License-Identifier:     GPL-2.0+
   5  */
   6 #ifndef __CONFIG_DENX_MCVEVK_H__
   7 #define __CONFIG_DENX_MCVEVK_H__
   8
   9 #include <asm/arch/base_addr_ac5.h>
  10
  11 /* U-Boot Commands */
  12 #define CONFIG_SYS_NO_FLASH
  13 #define CONFIG_DOS_PARTITION
  14 #define CONFIG_FAT_WRITE
  15 #define CONFIG_HW_WATCHDOG
  16
  17 /* Memory configurations */
  18 #define PHYS_SDRAM_1_SIZE               0x40000000      /* 1GiB on MCV */
  19
  20 /* Booting Linux */
  21 #define CONFIG_BOOTFILE         "fitImage"
  22 #define CONFIG_BOOTARGS         "console=ttyS0," __stringify(CONFIG_BAUDRATE)
  23 #define CONFIG_PREBOOT          "run try_bootscript"
  24 #define CONFIG_BOOTCOMMAND      "run mmc_mmc"
  25 #define CONFIG_LOADADDR         0x01000000
  26 #define CONFIG_SYS_LOAD_ADDR    CONFIG_LOADADDR
  27
  28 /* Environment is in MMC */
  29 #define CONFIG_ENV_OVERWRITE
  30 #define CONFIG_ENV_IS_IN_MMC
  31
  32 /* Extra Environment */
  33 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  34         "consdev=ttyS0\0"                                               \
  35         "baudrate=115200\0"                                             \
  36         "bootscript=boot.scr\0"                                         \
  37         "bootdev=/dev/mmcblk0p2\0"                                      \
  38         "rootdev=/dev/mmcblk0p3\0"                                      \
  39         "netdev=eth0\0"                                                 \
  40         "hostname=mcvevk\0"                                             \
  41         "kernel_addr_r=0x10000000\0"                                    \
  42         "update_filename=u-boot-with-spl.sfp\0"                         \
  43         "update_sd_offset=0x800\0"                                      \
  44         "update_sd="            /* Update the SD firmware partition */  \
  45                 "if mmc rescan ; then "                                 \
  46                 "if tftp ${update_filename} ; then "                    \
  47                 "setexpr fw_sz ${filesize} / 0x200 ; "  /* SD block size */ \
  48                 "setexpr fw_sz ${fw_sz} + 1 ; "                         \
  49                 "mmc write ${loadaddr} ${update_sd_offset} ${fw_sz} ; " \
  50                 "fi ; "                                                 \
  51                 "fi\0"                                                  \
  52         "update_qspi_offset=0x0\0"                                      \
  53         "update_qspi="          /* Update the QSPI firmware */          \
  54                 "if sf probe ; then "                                   \
  55                 "if tftp ${update_filename} ; then "                    \
  56                 "sf update ${loadaddr} ${update_qspi_offset} ${filesize} ; " \
  57                 "fi ; "                                                 \
  58                 "fi\0"                                                  \
  59         "fpga_filename=output_file.rbf\0"                               \
  60         "load_fpga="            /* Load FPGA bitstream */               \
  61                 "if tftp ${fpga_filename} ; then "                      \
  62                 "fpga load 0 $loadaddr $filesize ; "                    \
  63                 "bridge enable ; "                                      \
  64                 "fi\0"                                                  \
  65         "addcons="                                                      \
  66                 "setenv bootargs ${bootargs} "                          \
  67                 "console=${consdev},${baudrate}\0"                      \
  68         "addip="                                                        \
  69                 "setenv bootargs ${bootargs} "                          \
  70                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
  71                         "${netmask}:${hostname}:${netdev}:off\0"        \
  72         "addmisc="                                                      \
  73                 "setenv bootargs ${bootargs} ${miscargs}\0"             \
  74         "addargs=run addcons addmisc\0"                                 \
  75         "mmcload="                                                      \
  76                 "mmc rescan ; "                                         \
  77                 "load mmc 0:2 ${kernel_addr_r} ${bootfile}\0"           \
  78         "netload="                                                      \
  79                 "tftp ${kernel_addr_r} ${hostname}/${bootfile}\0"       \
  80         "miscargs=nohlt panic=1\0"                                      \
  81         "mmcargs=setenv bootargs root=${rootdev} rw rootwait\0"         \
  82         "nfsargs="                                                      \
  83                 "setenv bootargs root=/dev/nfs rw "                     \
  84                         "nfsroot=${serverip}:${rootpath},v3,tcp\0"      \
  85         "mmc_mmc="                                                      \
  86                 "run mmcload mmcargs addargs ; "                        \
  87                 "bootm ${kernel_addr_r}\0"                              \
  88         "mmc_nfs="                                                      \
  89                 "run mmcload nfsargs addip addargs ; "                  \
  90                 "bootm ${kernel_addr_r}\0"                              \
  91         "net_mmc="                                                      \
  92                 "run netload mmcargs addargs ; "                        \
  93                 "bootm ${kernel_addr_r}\0"                              \
  94         "net_nfs="                                                      \
  95                 "run netload nfsargs addip addargs ; "                  \
  96                 "bootm ${kernel_addr_r}\0"                              \
  97         "try_bootscript="                                               \
  98                 "mmc rescan;"                                           \
  99                 "if test -e mmc 0:2 ${bootscript} ; then "              \
 100                 "if load mmc 0:2 ${kernel_addr_r} ${bootscript};"       \
 101                 "then ; "                                               \
 102                         "echo Running bootscript... ; "                 \
 103                         "source ${kernel_addr_r} ; "                    \
 104                 "fi ; "                                                 \
 105                 "fi\0"
 106
 107 /* The rest of the configuration is shared */
 108 #include <configs/socfpga_common.h>
 109
 110 #endif  /* __CONFIG_DENX_MCVEVK_H__ */