1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Bluewater Systems Snapper 9260 and 9G20 modules
5 * (C) Copyright 2011 Bluewater Systems
6 * Author: Andre Renaud <andre@bluewatersys.com>
7 * Author: Ryan Mallon <ryan@bluewatersys.com>
13 /* SoC type is defined in boards.cfg */
14 #include <asm/hardware.h>
15 #include <linux/sizes.h>
17 /* ARM asynchronous clock */
18 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */
19 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768
24 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
25 #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* 64MB */
26 #define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \
27 GENERATED_GBL_DATA_SIZE)
29 /* Mem test settings */
32 #define CONFIG_SYS_MAX_NAND_DEVICE 1
33 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
34 #define CONFIG_SYS_NAND_DBW_8
35 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* AD21 */
36 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* AD22 */
37 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
38 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
42 #define CONFIG_TFTP_PORT
45 #define CONFIG_USB_ATMEL
46 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
47 #define CONFIG_USB_OHCI_NEW
48 #define CONFIG_SYS_USB_OHCI_CPU_INIT
49 #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE
50 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
51 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
53 /* GPIOs and IO expander */
54 #define CONFIG_PCA953X
55 #define CONFIG_SYS_I2C_PCA953X_ADDR 0x28
56 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x28, 16} }
58 /* UARTs/Serial console */
59 #ifndef CONFIG_DM_SERIAL
60 #define CONFIG_USART_BASE ATMEL_BASE_DBGU
61 #define CONFIG_USART_ID ATMEL_ID_SYS
64 /* I2C - Bit-bashed */
65 #define CONFIG_SOFT_I2C_READ_REPEATED_START
66 #define I2C_INIT do { \
67 at91_set_gpio_output(AT91_PIN_PA23, 1); \
68 at91_set_gpio_output(AT91_PIN_PA24, 1); \
69 at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \
70 at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \
72 #define I2C_SOFT_DECLARATIONS
74 #define I2C_TRISTATE at91_set_gpio_input(AT91_PIN_PA23, 1);
75 #define I2C_READ at91_get_gpio_value(AT91_PIN_PA23);
76 #define I2C_SDA(bit) do { \
78 at91_set_gpio_input(AT91_PIN_PA23, 1); \
80 at91_set_gpio_output(AT91_PIN_PA23, 1); \
81 at91_set_gpio_value(AT91_PIN_PA23, bit); \
84 #define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit)
85 #define I2C_DELAY udelay(2)
89 /* Environment settings */
91 /* Console settings */
93 #endif /* __CONFIG_H */