1 /* SPDX-License-Identifier: GPL-2.0+ */
3 * Bluewater Systems Snapper 9260 and 9G20 modules
5 * (C) Copyright 2011 Bluewater Systems
6 * Author: Andre Renaud <andre@bluewatersys.com>
7 * Author: Ryan Mallon <ryan@bluewatersys.com>
13 /* SoC type is defined in boards.cfg */
14 #include <asm/hardware.h>
15 #include <linux/sizes.h>
17 /* ARM asynchronous clock */
18 #define CONFIG_SYS_AT91_MAIN_CLOCK 18432000 /* External Crystal, in Hz */
19 #define CONFIG_SYS_AT91_SLOW_CLOCK 32768
23 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
24 #define CONFIG_SETUP_MEMORY_TAGS
25 #define CONFIG_INITRD_TAG
28 #define CONFIG_SYS_SDRAM_BASE ATMEL_BASE_CS1
29 #define CONFIG_SYS_SDRAM_SIZE (64 * 1024 * 1024) /* 64MB */
30 #define CONFIG_SYS_INIT_SP_ADDR (ATMEL_BASE_SRAM1 + 0x1000 - \
31 GENERATED_GBL_DATA_SIZE)
33 /* Mem test settings */
36 #define CONFIG_SYS_MAX_NAND_DEVICE 1
37 #define CONFIG_SYS_NAND_BASE ATMEL_BASE_CS3
38 #define CONFIG_SYS_NAND_DBW_8
39 #define CONFIG_SYS_NAND_MASK_ALE (1 << 21) /* AD21 */
40 #define CONFIG_SYS_NAND_MASK_CLE (1 << 22) /* AD22 */
41 #define CONFIG_SYS_NAND_ENABLE_PIN AT91_PIN_PC14
42 #define CONFIG_SYS_NAND_READY_PIN AT91_PIN_PC13
47 #define CONFIG_NET_RETRY_COUNT 20
48 #define CONFIG_RESET_PHY_R
49 #define CONFIG_AT91_WANTS_COMMON_PHY
50 #define CONFIG_TFTP_PORT
53 #define CONFIG_USB_ATMEL
54 #define CONFIG_USB_ATMEL_CLK_SEL_PLLB
55 #define CONFIG_USB_OHCI_NEW
56 #define CONFIG_SYS_USB_OHCI_CPU_INIT
57 #define CONFIG_SYS_USB_OHCI_REGS_BASE ATMEL_UHP_BASE
58 #define CONFIG_SYS_USB_OHCI_SLOT_NAME "at91sam9260"
59 #define CONFIG_SYS_USB_OHCI_MAX_ROOT_PORTS 2
61 /* GPIOs and IO expander */
62 #define CONFIG_ATMEL_LEGACY
63 #define CONFIG_AT91_GPIO_PULLUP 1
64 #define CONFIG_PCA953X
65 #define CONFIG_SYS_I2C_PCA953X_ADDR 0x28
66 #define CONFIG_SYS_I2C_PCA953X_WIDTH { {0x28, 16} }
68 /* UARTs/Serial console */
69 #ifndef CONFIG_DM_SERIAL
70 #define CONFIG_USART_BASE ATMEL_BASE_DBGU
71 #define CONFIG_USART_ID ATMEL_ID_SYS
74 /* I2C - Bit-bashed */
75 #define CONFIG_SOFT_I2C_READ_REPEATED_START
76 #define I2C_INIT do { \
77 at91_set_gpio_output(AT91_PIN_PA23, 1); \
78 at91_set_gpio_output(AT91_PIN_PA24, 1); \
79 at91_set_pio_multi_drive(AT91_PIO_PORTA, 23, 1); \
80 at91_set_pio_multi_drive(AT91_PIO_PORTA, 24, 1); \
82 #define I2C_SOFT_DECLARATIONS
84 #define I2C_TRISTATE at91_set_gpio_input(AT91_PIN_PA23, 1);
85 #define I2C_READ at91_get_gpio_value(AT91_PIN_PA23);
86 #define I2C_SDA(bit) do { \
88 at91_set_gpio_input(AT91_PIN_PA23, 1); \
90 at91_set_gpio_output(AT91_PIN_PA23, 1); \
91 at91_set_gpio_value(AT91_PIN_PA23, bit); \
94 #define I2C_SCL(bit) at91_set_pio_value(AT91_PIO_PORTA, 24, bit)
95 #define I2C_DELAY udelay(2)
99 #define CONFIG_BOOTP_BOOTFILESIZE
101 /* Environment settings */
103 /* Console settings */
105 #endif /* __CONFIG_H */