include/configs/siemens-am33x-common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * siemens am33x common board options
   4  * (C) Copyright 2013 Siemens Schweiz AG
   5  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   6  *
   7  * Based on:
   8  * U-Boot file:/include/configs/am335x_evm.h
   9  *
  10  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  11  */
  12
  13 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
  14 #define __CONFIG_SIEMENS_AM33X_COMMON_H
  15
  16 #include <asm/arch/omap.h>
  17
  18 #define CONFIG_DMA_COHERENT
  19 #define CONFIG_DMA_COHERENT_SIZE        (1 << 20)
  20
  21 /* commands to include */
  22
  23 #ifndef CONFIG_SPL_BUILD
  24 #define CONFIG_ROOTPATH         "/opt/eldk"
  25 #endif
  26
  27 #define CONFIG_SYS_AUTOLOAD     "yes"
  28
  29 /* Clock Defines */
  30 #define V_OSCK                          24000000  /* Clock output from T2 */
  31 #define V_SCLK                          (V_OSCK)
  32
  33 /* We set the max number of command args high to avoid HUSH bugs. */
  34 #define CONFIG_SYS_MAXARGS              32
  35
  36 /* Console I/O Buffer Size */
  37 #define CONFIG_SYS_CBSIZE               1024
  38
  39 /* Boot Argument Buffer Size */
  40 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  41
  42 /*
  43  * memtest works on 8 MB in DRAM after skipping 32MB from
  44  * start addr of ram disk
  45  */
  46
  47  /* Physical Memory Map */
  48 #define PHYS_DRAM_1                     0x80000000      /* DRAM Bank #1 */
  49
  50 #define CONFIG_SYS_SDRAM_BASE           PHYS_DRAM_1
  51 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
  52                                                 GENERATED_GBL_DATA_SIZE)
  53  /* Platform/Board specific defs */
  54 #define CONFIG_SYS_TIMERBASE            0x48040000      /* Use Timer2 */
  55 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
  56
  57 /* NS16550 Configuration */
  58 #define CONFIG_SYS_NS16550_SERIAL
  59 #define CONFIG_SYS_NS16550_CLK          (48000000)
  60 #define CONFIG_SYS_NS16550_COM1         0x44e09000
  61 #define CONFIG_SYS_NS16550_COM4         0x481a6000
  62
  63
  64 /* I2C Configuration */
  65
  66 /* Defines for SPL */
  67 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
  68                                          CONFIG_SPL_TEXT_BASE)
  69
  70 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
  71 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
  72
  73 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
  74
  75 #define CONFIG_SYS_NAND_ONFI_DETECTION
  76 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  77 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
  78                                          CONFIG_SYS_NAND_PAGE_SIZE)
  79 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
  80 #define CONFIG_SYS_NAND_OOBSIZE         64
  81 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
  82 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
  83 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
  84                                          10, 11, 12, 13, 14, 15, 16, 17, \
  85                                          18, 19, 20, 21, 22, 23, 24, 25, \
  86                                          26, 27, 28, 29, 30, 31, 32, 33, \
  87                                          34, 35, 36, 37, 38, 39, 40, 41, \
  88                                          42, 43, 44, 45, 46, 47, 48, 49, \
  89                                          50, 51, 52, 53, 54, 55, 56, 57, }
  90
  91 #define CONFIG_SYS_NAND_ECCSIZE         512
  92 #define CONFIG_SYS_NAND_ECCBYTES        14
  93 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
  94
  95 #define CONFIG_SYS_NAND_ECCSTEPS        4
  96 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * \
  97                                                 CONFIG_SYS_NAND_ECCSTEPS)
  98
  99 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 100
 101 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 102
 103 /*
 104  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 105  * 64 bytes before this address should be set aside for u-boot.img's
 106  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 107  * other needs.
 108  */
 109 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 110 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 111
 112 /*
 113  * Since SPL did pll and ddr initialization for us,
 114  * we don't need to do it twice.
 115  */
 116
 117 #ifndef CONFIG_SPL_BUILD
 118 /*
 119  * USB configuration
 120  */
 121 #define CONFIG_AM335X_USB0
 122 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 123 #define CONFIG_AM335X_USB1
 124 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 125
 126 /* USB DRACO ID as default */
 127 #define CONFIG_USBD_HS
 128
 129 /* USB Device Firmware Update support */
 130 #define DFU_MANIFEST_POLL_TIMEOUT       25000
 131
 132 #endif /* CONFIG_SPL_BUILD */
 133
 134 /*
 135  * Default to using SPI for environment, etc.  We have multiple copies
 136  * of SPL as the ROM will check these locations.
 137  * 0x0 - 0x20000 : First copy of SPL
 138  * 0x20000 - 0x40000 : Second copy of SPL
 139  * 0x40000 - 0x60000 : Third copy of SPL
 140  * 0x60000 - 0x80000 : Fourth copy of SPL
 141  * 0x80000 - 0xDF000 : U-Boot
 142  * 0xDF000 - 0xE0000 : U-Boot Environment
 143  * 0xE0000 - 0x442000 : Linux Kernel
 144  * 0x442000 - 0x800000 : Userland
 145  */
 146
 147 #define CONFIG_NET_RETRY_COUNT         10
 148
 149 /* NAND support */
 150 #ifdef CONFIG_MTD_RAW_NAND
 151 /* UBI Support */
 152
 153 /* Commen environment */
 154 #define COMMON_ENV_DFU_ARGS     "dfu_args=run bootargs_defaults;" \
 155                                 "setenv bootargs ${bootargs};" \
 156                                 "mtdparts default;" \
 157                                 "draco_led 1;" \
 158                                 "dfu 0 nand 0;" \
 159                                 "draco_led 0;\0" \
 160
 161 #define COMMON_ENV_NAND_BOOT \
 162                 "nand_boot=echo Booting from nand; " \
 163                 "if test ${upgrade_available} -eq 1; then " \
 164                         "if test ${bootcount} -gt ${bootlimit}; " \
 165                                 "then " \
 166                                 "setenv upgrade_available 0;" \
 167                                 "setenv ${partitionset_active} true;" \
 168                                 "if test -n ${A}; then " \
 169                                         "setenv partitionset_active B; " \
 170                                         "env delete A; " \
 171                                 "fi;" \
 172                                 "if test -n ${B}; then " \
 173                                         "setenv partitionset_active A; " \
 174                                         "env delete B; " \
 175                                 "fi;" \
 176                                 "saveenv; " \
 177                         "fi;" \
 178                 "fi;" \
 179                 "echo set ${partitionset_active}...;" \
 180                 "run nand_args; "
 181
 182 #define COMMON_ENV_NAND_CMDS    "flash_self=run nand_boot\0" \
 183                                 "flash_self_test=setenv testargs test; " \
 184                                         "run nand_boot\0" \
 185                                 "dfu_start=echo Preparing for dfu mode ...; " \
 186                                 "run dfu_args; \0"
 187
 188 #define COMMON_ENV_SETTINGS \
 189         "verify=no \0" \
 190         "project_dir=targetdir\0" \
 191         "upgrade_available=0\0" \
 192         "altbootcmd=run bootcmd\0" \
 193         "partitionset_active=A\0" \
 194         "loadaddr=0x82000000\0" \
 195         "kloadaddr=0x81000000\0" \
 196         "script_addr=0x81900000\0" \
 197         "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
 198         "nfsopts=nolock rw\0" \
 199         "ip_method=none\0" \
 200         "bootenv=uEnv.txt\0" \
 201         "bootargs_defaults=setenv bootargs " \
 202                 "console=${console} " \
 203                 "${testargs} " \
 204                 "${optargs}\0" \
 205         "siemens_help=echo; "\
 206                 "echo Type 'run flash_self' to use kernel and root " \
 207                 "filesystem on memory; echo Type 'run flash_self_test' to " \
 208                 "use kernel and root filesystem on memory, boot in test " \
 209                 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
 210                 "from memory and root filesystem over NFS; echo Type " \
 211                 "'run net_nfs' to get Kernel over TFTP and mount root " \
 212                 "filesystem over NFS; " \
 213                 "echo Set partitionset_active variable to 'A' " \
 214                 "or 'B' to select kernel and rootfs partition; " \
 215                 "echo" \
 216                 "\0"
 217
 218 /*
 219  * Variant 1 partition layout
 220  * chip-size = 256MiB
 221  *|         name |        size |           address area |
 222  *-------------------------------------------------------
 223  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 224  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 225  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 226  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 227  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 228  *|    uboot.env | 128.000 KiB | 0x  260000..0x  27ffff |
 229  *|     kernel_a |   5.000 MiB | 0x  280000..0x  77ffff |
 230  *|     kernel_b |   5.000 MiB | 0x  780000..0x  c7ffff |
 231  *|      mtdoops |   8.000 MiB | 0x  c80000..0x 147ffff |
 232  *|       rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
 233  *-------------------------------------------------------
 234
 235                                         "mtdparts=omap2-nand.0:" \
 236                                         "128k(spl),"            \
 237                                         "128k(spl.backup1),"    \
 238                                         "128k(spl.backup2),"    \
 239                                         "128k(spl.backup3),"    \
 240                                         "1920k(u-boot),"        \
 241                                         "128k(uboot.env),"      \
 242                                         "5120k(kernel_a),"      \
 243                                         "5120k(kernel_b),"      \
 244                                         "8192k(mtdoops),"       \
 245                                         "-(rootfs)"
 246  */
 247
 248 #define DFU_ALT_INFO_NAND_V1 \
 249         "spl part 0 1;" \
 250         "spl.backup1 part 0 2;" \
 251         "spl.backup2 part 0 3;" \
 252         "spl.backup3 part 0 4;" \
 253         "u-boot part 0 5;" \
 254         "u-boot.env part 0 6;" \
 255         "kernel_a part 0 7;" \
 256         "kernel_b part 0 8;" \
 257         "rootfs partubi 0 10"
 258
 259 #define CONFIG_ENV_SETTINGS_NAND_V1 \
 260         "nand_active_ubi_vol=rootfs_a\0" \
 261         "nand_active_ubi_vol_A=rootfs_a\0" \
 262         "nand_active_ubi_vol_B=rootfs_b\0" \
 263         "nand_root_fs_type=ubifs rootwait=1\0" \
 264         "nand_src_addr=0x280000\0" \
 265         "nand_src_addr_A=0x280000\0" \
 266         "nand_src_addr_B=0x780000\0" \
 267         "nand_args=run bootargs_defaults;" \
 268                 "mtdparts default;" \
 269                 "setenv ${partitionset_active} true;" \
 270                 "if test -n ${A}; then " \
 271                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
 272                         "setenv nand_src_addr ${nand_src_addr_A};" \
 273                 "fi;" \
 274                 "if test -n ${B}; then " \
 275                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
 276                         "setenv nand_src_addr ${nand_src_addr_B};" \
 277                 "fi;" \
 278                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 279                 "ubi.mtd=9,${ubi_off};" \
 280                 "setenv bootargs ${bootargs} " \
 281                 "root=${nand_root} noinitrd ${mtdparts} " \
 282                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 283                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 284                 "=mtdoops\0" \
 285         COMMON_ENV_DFU_ARGS \
 286                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
 287         COMMON_ENV_NAND_BOOT \
 288                 "nand read.i ${kloadaddr} ${nand_src_addr} " \
 289                 "${nand_img_size}; bootm ${kloadaddr}\0" \
 290         COMMON_ENV_NAND_CMDS
 291
 292 #define CONFIG_ENV_SETTINGS_V1 \
 293                 COMMON_ENV_SETTINGS \
 294         "net_args=run bootargs_defaults;" \
 295                 "mtdparts default;" \
 296                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 297                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 298                 "setenv bootargs ${bootargs} " \
 299                 "root=/dev/nfs ${mtdparts} " \
 300                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 301                 "ip=${ipaddr}:${serverip}:" \
 302                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 303         "net_nfs=echo Booting from network ...; " \
 304                 "run net_args; " \
 305                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 306                 "bootm ${kloadaddr}\0"
 307
 308 /*
 309  * Variant 2 partition layout (default)
 310  * chip-size = 256MiB or 512 MiB
 311  *|         name |        size |           address area |
 312  *-------------------------------------------------------
 313  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 314  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 315  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 316  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 317  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 318  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 319  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 320  *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
 321  *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
 322  *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
 323  *-------------------------------------------------------
 324  */
 325
 326 #define DFU_ALT_INFO_NAND_V2 \
 327         "spl part 0 1;" \
 328         "spl.backup1 part 0 2;" \
 329         "spl.backup2 part 0 3;" \
 330         "spl.backup3 part 0 4;" \
 331         "u-boot part 0 5;" \
 332         "u-boot.env0 part 0 6;" \
 333         "u-boot.env1 part 0 7;" \
 334         "rootfs partubi 0 9" \
 335
 336 #define CONFIG_ENV_SETTINGS_NAND_V2 \
 337         "nand_active_ubi_vol=rootfs_a\0" \
 338         "rootfs_name=rootfs\0" \
 339         "kernel_name=uImage\0"\
 340         "nand_root_fs_type=ubifs rootwait=1\0" \
 341         "nand_args=run bootargs_defaults;" \
 342                 "mtdparts default;" \
 343                 "setenv ${partitionset_active} true;" \
 344                 "if test -n ${A}; then " \
 345                         "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
 346                 "fi;" \
 347                 "if test -n ${B}; then " \
 348                         "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 349                 "fi;" \
 350                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 351                 "ubi.mtd=rootfs,2048;" \
 352                 "setenv bootargs ${bootargs} " \
 353                 "root=${nand_root} noinitrd ${mtdparts} " \
 354                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 355                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 356                 "=mtdoops\0" \
 357         COMMON_ENV_DFU_ARGS \
 358                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
 359         COMMON_ENV_NAND_BOOT \
 360                 "ubi part rootfs ${ubi_off};" \
 361                 "ubifsmount ubi0:${nand_active_ubi_vol};" \
 362                 "ubifsload ${kloadaddr} boot/${kernel_name};" \
 363                 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
 364                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 365         "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
 366                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 367         COMMON_ENV_NAND_CMDS
 368
 369 #define CONFIG_ENV_SETTINGS_V2 \
 370                 COMMON_ENV_SETTINGS \
 371         "net_args=run bootargs_defaults;" \
 372                 "mtdparts default;" \
 373                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 374                 "setenv bootdtb ${project_dir}/kernel/dtb;" \
 375                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 376                 "setenv bootargs ${bootargs} " \
 377                 "root=/dev/nfs ${mtdparts} " \
 378                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 379                 "ip=${ipaddr}:${serverip}:" \
 380                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 381         "net_nfs=echo Booting from network ...; " \
 382                 "run net_args; " \
 383                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 384                 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
 385                 "bootm ${kloadaddr} - ${loadaddr}\0"
 386
 387 /*
 388  * Variant 3 partition layout
 389  * chip-size = 512MiB
 390  *|         name |        size |           address area |
 391  *-------------------------------------------------------
 392  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 393  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 394  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 395  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 396  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 397  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 398  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 399  *|       rootfs | 300.000 MiB | 0x  360000..0x12f5ffff |
 400  *|      mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
 401  *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
 402  *-------------------------------------------------------
 403
 404                                         "mtdparts=omap2-nand.0:" \
 405                                         "128k(spl),"            \
 406                                         "128k(spl.backup1),"    \
 407                                         "128k(spl.backup2),"    \
 408                                         "128k(spl.backup3),"    \
 409                                         "1920k(u-boot),"        \
 410                                         "512k(u-boot.env0),"    \
 411                                         "512k(u-boot.env1),"    \
 412                                         "300m(rootfs),"         \
 413                                         "512k(mtdoops),"        \
 414                                         "-(configuration)"
 415
 416  */
 417
 418 #define CONFIG_SYS_NAND_BASE            (0x08000000)    /* physical address */
 419                                                         /* to access nand at */
 420                                                         /* CS0 */
 421 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND
 422                                                            devices */
 423 #if !defined(CONFIG_SPI_BOOT)
 424 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 425 #endif
 426 #endif
 427
 428 /* Reboot after 60 sec if bootcmd fails */
 429 #define CONFIG_RESET_TO_RETRY
 430 #define CONFIG_BOOT_RETRY_TIME 60
 431
 432 #endif  /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */