include/configs/siemens-am33x-common.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * siemens am33x common board options
   4  * (C) Copyright 2013 Siemens Schweiz AG
   5  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   6  *
   7  * Based on:
   8  * U-Boot file:/include/configs/am335x_evm.h
   9  *
  10  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  11  */
  12
  13 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
  14 #define __CONFIG_SIEMENS_AM33X_COMMON_H
  15
  16 #include <asm/arch/omap.h>
  17
  18 #define CONFIG_DMA_COHERENT
  19 #define CONFIG_DMA_COHERENT_SIZE        (1 << 20)
  20
  21 #define CONFIG_SYS_MALLOC_LEN           (16 * 1024 * 1024)
  22 #ifdef CONFIG_SIEMENS_MACH_TYPE
  23 #define CONFIG_MACH_TYPE                CONFIG_SIEMENS_MACH_TYPE
  24 #endif
  25
  26 #define CONFIG_CMDLINE_TAG              /* enable passing of ATAGs */
  27 #define CONFIG_SETUP_MEMORY_TAGS
  28 #define CONFIG_INITRD_TAG
  29
  30 /* commands to include */
  31
  32 #ifndef CONFIG_SPL_BUILD
  33 #define CONFIG_ROOTPATH         "/opt/eldk"
  34 #endif
  35
  36 #define CONFIG_SYS_AUTOLOAD     "yes"
  37
  38 /* Clock Defines */
  39 #define V_OSCK                          24000000  /* Clock output from T2 */
  40 #define V_SCLK                          (V_OSCK)
  41
  42 /* We set the max number of command args high to avoid HUSH bugs. */
  43 #define CONFIG_SYS_MAXARGS              32
  44
  45 /* Console I/O Buffer Size */
  46 #define CONFIG_SYS_CBSIZE               1024
  47
  48 /* Boot Argument Buffer Size */
  49 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  50
  51 /*
  52  * memtest works on 8 MB in DRAM after skipping 32MB from
  53  * start addr of ram disk
  54  */
  55
  56  /* Physical Memory Map */
  57 #define PHYS_DRAM_1                     0x80000000      /* DRAM Bank #1 */
  58
  59 #define CONFIG_SYS_SDRAM_BASE           PHYS_DRAM_1
  60 #define CONFIG_SYS_INIT_SP_ADDR         (NON_SECURE_SRAM_END - \
  61                                                 GENERATED_GBL_DATA_SIZE)
  62  /* Platform/Board specific defs */
  63 #define CONFIG_SYS_TIMERBASE            0x48040000      /* Use Timer2 */
  64 #define CONFIG_SYS_PTV                  2       /* Divisor: 2^(PTV+1) => 8 */
  65
  66 /* NS16550 Configuration */
  67 #define CONFIG_SYS_NS16550_SERIAL
  68 #define CONFIG_SYS_NS16550_CLK          (48000000)
  69 #define CONFIG_SYS_NS16550_COM1         0x44e09000
  70 #define CONFIG_SYS_NS16550_COM4         0x481a6000
  71
  72
  73 /* I2C Configuration */
  74
  75 /* Defines for SPL */
  76 #define CONFIG_SPL_MAX_SIZE             (SRAM_SCRATCH_SPACE_ADDR - \
  77                                          CONFIG_SPL_TEXT_BASE)
  78
  79 #define CONFIG_SPL_BSS_START_ADDR       0x80000000
  80 #define CONFIG_SPL_BSS_MAX_SIZE         0x80000         /* 512 KB */
  81
  82 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
  83
  84 #define CONFIG_SYS_NAND_ONFI_DETECTION
  85 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
  86 #define CONFIG_SYS_NAND_PAGE_COUNT      (CONFIG_SYS_NAND_BLOCK_SIZE / \
  87                                          CONFIG_SYS_NAND_PAGE_SIZE)
  88 #define CONFIG_SYS_NAND_PAGE_SIZE       2048
  89 #define CONFIG_SYS_NAND_OOBSIZE         64
  90 #define CONFIG_SYS_NAND_BLOCK_SIZE      (128*1024)
  91 #define CONFIG_SYS_NAND_BAD_BLOCK_POS   NAND_LARGE_BADBLOCK_POS
  92 #define CONFIG_SYS_NAND_ECCPOS          { 2, 3, 4, 5, 6, 7, 8, 9, \
  93                                          10, 11, 12, 13, 14, 15, 16, 17, \
  94                                          18, 19, 20, 21, 22, 23, 24, 25, \
  95                                          26, 27, 28, 29, 30, 31, 32, 33, \
  96                                          34, 35, 36, 37, 38, 39, 40, 41, \
  97                                          42, 43, 44, 45, 46, 47, 48, 49, \
  98                                          50, 51, 52, 53, 54, 55, 56, 57, }
  99
 100 #define CONFIG_SYS_NAND_ECCSIZE         512
 101 #define CONFIG_SYS_NAND_ECCBYTES        14
 102 #define CONFIG_NAND_OMAP_ECCSCHEME      OMAP_ECC_BCH8_CODE_HW
 103
 104 #define CONFIG_SYS_NAND_ECCSTEPS        4
 105 #define CONFIG_SYS_NAND_ECCTOTAL        (CONFIG_SYS_NAND_ECCBYTES * \
 106                                                 CONFIG_SYS_NAND_ECCSTEPS)
 107
 108 #define CONFIG_SYS_NAND_U_BOOT_START    CONFIG_SYS_TEXT_BASE
 109
 110 #define CONFIG_SYS_NAND_U_BOOT_OFFS     0x80000
 111
 112 /*
 113  * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
 114  * 64 bytes before this address should be set aside for u-boot.img's
 115  * header. That is 0x800FFFC0--0x80100000 should not be used for any
 116  * other needs.
 117  */
 118 #define CONFIG_SYS_SPL_MALLOC_START     0x80208000
 119 #define CONFIG_SYS_SPL_MALLOC_SIZE      0x100000
 120
 121 /*
 122  * Since SPL did pll and ddr initialization for us,
 123  * we don't need to do it twice.
 124  */
 125 #ifndef CONFIG_SPL_BUILD
 126 #define CONFIG_SKIP_LOWLEVEL_INIT
 127 #endif
 128
 129 #ifndef CONFIG_SPL_BUILD
 130 /*
 131  * USB configuration
 132  */
 133 #define CONFIG_AM335X_USB0
 134 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
 135 #define CONFIG_AM335X_USB1
 136 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
 137
 138 /* USB DRACO ID as default */
 139 #define CONFIG_USBD_HS
 140
 141 /* USB Device Firmware Update support */
 142 #define DFU_MANIFEST_POLL_TIMEOUT       25000
 143
 144 #endif /* CONFIG_SPL_BUILD */
 145
 146 /*
 147  * Default to using SPI for environment, etc.  We have multiple copies
 148  * of SPL as the ROM will check these locations.
 149  * 0x0 - 0x20000 : First copy of SPL
 150  * 0x20000 - 0x40000 : Second copy of SPL
 151  * 0x40000 - 0x60000 : Third copy of SPL
 152  * 0x60000 - 0x80000 : Fourth copy of SPL
 153  * 0x80000 - 0xDF000 : U-Boot
 154  * 0xDF000 - 0xE0000 : U-Boot Environment
 155  * 0xE0000 - 0x442000 : Linux Kernel
 156  * 0x442000 - 0x800000 : Userland
 157  */
 158
 159 #define CONFIG_NET_RETRY_COUNT         10
 160
 161 /* NAND support */
 162 #ifdef CONFIG_MTD_RAW_NAND
 163 /* UBI Support */
 164
 165 /* Commen environment */
 166 #define COMMON_ENV_DFU_ARGS     "dfu_args=run bootargs_defaults;" \
 167                                 "setenv bootargs ${bootargs};" \
 168                                 "mtdparts default;" \
 169                                 "draco_led 1;" \
 170                                 "dfu 0 nand 0;" \
 171                                 "draco_led 0;\0" \
 172
 173 #define COMMON_ENV_NAND_BOOT \
 174                 "nand_boot=echo Booting from nand; " \
 175                 "if test ${upgrade_available} -eq 1; then " \
 176                         "if test ${bootcount} -gt ${bootlimit}; " \
 177                                 "then " \
 178                                 "setenv upgrade_available 0;" \
 179                                 "setenv ${partitionset_active} true;" \
 180                                 "if test -n ${A}; then " \
 181                                         "setenv partitionset_active B; " \
 182                                         "env delete A; " \
 183                                 "fi;" \
 184                                 "if test -n ${B}; then " \
 185                                         "setenv partitionset_active A; " \
 186                                         "env delete B; " \
 187                                 "fi;" \
 188                                 "saveenv; " \
 189                         "fi;" \
 190                 "fi;" \
 191                 "echo set ${partitionset_active}...;" \
 192                 "run nand_args; "
 193
 194 #define COMMON_ENV_NAND_CMDS    "flash_self=run nand_boot\0" \
 195                                 "flash_self_test=setenv testargs test; " \
 196                                         "run nand_boot\0" \
 197                                 "dfu_start=echo Preparing for dfu mode ...; " \
 198                                 "run dfu_args; \0"
 199
 200 #define COMMON_ENV_SETTINGS \
 201         "verify=no \0" \
 202         "project_dir=targetdir\0" \
 203         "upgrade_available=0\0" \
 204         "altbootcmd=run bootcmd\0" \
 205         "partitionset_active=A\0" \
 206         "loadaddr=0x82000000\0" \
 207         "kloadaddr=0x81000000\0" \
 208         "script_addr=0x81900000\0" \
 209         "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
 210         "nfsopts=nolock rw\0" \
 211         "ip_method=none\0" \
 212         "bootenv=uEnv.txt\0" \
 213         "bootargs_defaults=setenv bootargs " \
 214                 "console=${console} " \
 215                 "${testargs} " \
 216                 "${optargs}\0" \
 217         "siemens_help=echo; "\
 218                 "echo Type 'run flash_self' to use kernel and root " \
 219                 "filesystem on memory; echo Type 'run flash_self_test' to " \
 220                 "use kernel and root filesystem on memory, boot in test " \
 221                 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
 222                 "from memory and root filesystem over NFS; echo Type " \
 223                 "'run net_nfs' to get Kernel over TFTP and mount root " \
 224                 "filesystem over NFS; " \
 225                 "echo Set partitionset_active variable to 'A' " \
 226                 "or 'B' to select kernel and rootfs partition; " \
 227                 "echo" \
 228                 "\0"
 229
 230 /*
 231  * Variant 1 partition layout
 232  * chip-size = 256MiB
 233  *|         name |        size |           address area |
 234  *-------------------------------------------------------
 235  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 236  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 237  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 238  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 239  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 240  *|    uboot.env | 128.000 KiB | 0x  260000..0x  27ffff |
 241  *|     kernel_a |   5.000 MiB | 0x  280000..0x  77ffff |
 242  *|     kernel_b |   5.000 MiB | 0x  780000..0x  c7ffff |
 243  *|      mtdoops |   8.000 MiB | 0x  c80000..0x 147ffff |
 244  *|       rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
 245  *-------------------------------------------------------
 246
 247                                         "mtdparts=omap2-nand.0:" \
 248                                         "128k(spl),"            \
 249                                         "128k(spl.backup1),"    \
 250                                         "128k(spl.backup2),"    \
 251                                         "128k(spl.backup3),"    \
 252                                         "1920k(u-boot),"        \
 253                                         "128k(uboot.env),"      \
 254                                         "5120k(kernel_a),"      \
 255                                         "5120k(kernel_b),"      \
 256                                         "8192k(mtdoops),"       \
 257                                         "-(rootfs)"
 258  */
 259
 260 #define DFU_ALT_INFO_NAND_V1 \
 261         "spl part 0 1;" \
 262         "spl.backup1 part 0 2;" \
 263         "spl.backup2 part 0 3;" \
 264         "spl.backup3 part 0 4;" \
 265         "u-boot part 0 5;" \
 266         "u-boot.env part 0 6;" \
 267         "kernel_a part 0 7;" \
 268         "kernel_b part 0 8;" \
 269         "rootfs partubi 0 10"
 270
 271 #define CONFIG_ENV_SETTINGS_NAND_V1 \
 272         "nand_active_ubi_vol=rootfs_a\0" \
 273         "nand_active_ubi_vol_A=rootfs_a\0" \
 274         "nand_active_ubi_vol_B=rootfs_b\0" \
 275         "nand_root_fs_type=ubifs rootwait=1\0" \
 276         "nand_src_addr=0x280000\0" \
 277         "nand_src_addr_A=0x280000\0" \
 278         "nand_src_addr_B=0x780000\0" \
 279         "nand_args=run bootargs_defaults;" \
 280                 "mtdparts default;" \
 281                 "setenv ${partitionset_active} true;" \
 282                 "if test -n ${A}; then " \
 283                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
 284                         "setenv nand_src_addr ${nand_src_addr_A};" \
 285                 "fi;" \
 286                 "if test -n ${B}; then " \
 287                         "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
 288                         "setenv nand_src_addr ${nand_src_addr_B};" \
 289                 "fi;" \
 290                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 291                 "ubi.mtd=9,${ubi_off};" \
 292                 "setenv bootargs ${bootargs} " \
 293                 "root=${nand_root} noinitrd ${mtdparts} " \
 294                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 295                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 296                 "=mtdoops\0" \
 297         COMMON_ENV_DFU_ARGS \
 298                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
 299         COMMON_ENV_NAND_BOOT \
 300                 "nand read.i ${kloadaddr} ${nand_src_addr} " \
 301                 "${nand_img_size}; bootm ${kloadaddr}\0" \
 302         COMMON_ENV_NAND_CMDS
 303
 304 #define CONFIG_ENV_SETTINGS_V1 \
 305                 COMMON_ENV_SETTINGS \
 306         "net_args=run bootargs_defaults;" \
 307                 "mtdparts default;" \
 308                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 309                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 310                 "setenv bootargs ${bootargs} " \
 311                 "root=/dev/nfs ${mtdparts} " \
 312                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 313                 "ip=${ipaddr}:${serverip}:" \
 314                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 315         "net_nfs=echo Booting from network ...; " \
 316                 "run net_args; " \
 317                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 318                 "bootm ${kloadaddr}\0"
 319
 320 /*
 321  * Variant 2 partition layout (default)
 322  * chip-size = 256MiB or 512 MiB
 323  *|         name |        size |           address area |
 324  *-------------------------------------------------------
 325  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 326  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 327  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 328  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 329  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 330  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 331  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 332  *|      mtdoops | 512.000 KiB | 0x  360000..0x  3dffff |
 333  *| (256) rootfs | 252.125 MiB | 0x  3E0000..0x fffffff |
 334  *| (512) rootfs | 508.125 MiB | 0x  3E0000..0x1fffffff |
 335  *-------------------------------------------------------
 336  */
 337
 338 #define DFU_ALT_INFO_NAND_V2 \
 339         "spl part 0 1;" \
 340         "spl.backup1 part 0 2;" \
 341         "spl.backup2 part 0 3;" \
 342         "spl.backup3 part 0 4;" \
 343         "u-boot part 0 5;" \
 344         "u-boot.env0 part 0 6;" \
 345         "u-boot.env1 part 0 7;" \
 346         "rootfs partubi 0 9" \
 347
 348 #define CONFIG_ENV_SETTINGS_NAND_V2 \
 349         "nand_active_ubi_vol=rootfs_a\0" \
 350         "rootfs_name=rootfs\0" \
 351         "kernel_name=uImage\0"\
 352         "nand_root_fs_type=ubifs rootwait=1\0" \
 353         "nand_args=run bootargs_defaults;" \
 354                 "mtdparts default;" \
 355                 "setenv ${partitionset_active} true;" \
 356                 "if test -n ${A}; then " \
 357                         "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
 358                 "fi;" \
 359                 "if test -n ${B}; then " \
 360                         "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
 361                 "fi;" \
 362                 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
 363                 "ubi.mtd=rootfs,2048;" \
 364                 "setenv bootargs ${bootargs} " \
 365                 "root=${nand_root} noinitrd ${mtdparts} " \
 366                 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
 367                 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
 368                 "=mtdoops\0" \
 369         COMMON_ENV_DFU_ARGS \
 370                 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
 371         COMMON_ENV_NAND_BOOT \
 372                 "ubi part rootfs ${ubi_off};" \
 373                 "ubifsmount ubi0:${nand_active_ubi_vol};" \
 374                 "ubifsload ${kloadaddr} boot/${kernel_name};" \
 375                 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
 376                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 377         "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
 378                 "bootm ${kloadaddr} - ${loadaddr}\0" \
 379         COMMON_ENV_NAND_CMDS
 380
 381 #define CONFIG_ENV_SETTINGS_V2 \
 382                 COMMON_ENV_SETTINGS \
 383         "net_args=run bootargs_defaults;" \
 384                 "mtdparts default;" \
 385                 "setenv bootfile ${project_dir}/kernel/uImage;" \
 386                 "setenv bootdtb ${project_dir}/kernel/dtb;" \
 387                 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
 388                 "setenv bootargs ${bootargs} " \
 389                 "root=/dev/nfs ${mtdparts} " \
 390                 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
 391                 "ip=${ipaddr}:${serverip}:" \
 392                 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
 393         "net_nfs=echo Booting from network ...; " \
 394                 "run net_args; " \
 395                 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
 396                 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
 397                 "bootm ${kloadaddr} - ${loadaddr}\0"
 398
 399 /*
 400  * Variant 3 partition layout
 401  * chip-size = 512MiB
 402  *|         name |        size |           address area |
 403  *-------------------------------------------------------
 404  *|          spl | 128.000 KiB | 0x       0..0x   1ffff |
 405  *|  spl.backup1 | 128.000 KiB | 0x   20000..0x   3ffff |
 406  *|  spl.backup2 | 128.000 KiB | 0x   40000..0x   5ffff |
 407  *|  spl.backup3 | 128.000 KiB | 0x   60000..0x   7ffff |
 408  *|       u-boot |   1.875 MiB | 0x   80000..0x  25ffff |
 409  *|   uboot.env0 | 512.000 KiB | 0x  260000..0x  2Dffff |
 410  *|   uboot.env1 | 512.000 KiB | 0x  2E0000..0x  35ffff |
 411  *|       rootfs | 300.000 MiB | 0x  360000..0x12f5ffff |
 412  *|      mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
 413  *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
 414  *-------------------------------------------------------
 415
 416                                         "mtdparts=omap2-nand.0:" \
 417                                         "128k(spl),"            \
 418                                         "128k(spl.backup1),"    \
 419                                         "128k(spl.backup2),"    \
 420                                         "128k(spl.backup3),"    \
 421                                         "1920k(u-boot),"        \
 422                                         "512k(u-boot.env0),"    \
 423                                         "512k(u-boot.env1),"    \
 424                                         "300m(rootfs),"         \
 425                                         "512k(mtdoops),"        \
 426                                         "-(configuration)"
 427
 428  */
 429
 430 #define CONFIG_SYS_NAND_BASE            (0x08000000)    /* physical address */
 431                                                         /* to access nand at */
 432                                                         /* CS0 */
 433 #define CONFIG_SYS_MAX_NAND_DEVICE      1               /* Max number of NAND
 434                                                            devices */
 435 #if !defined(CONFIG_SPI_BOOT)
 436 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 437 #endif
 438 #endif
 439
 440 /* Reboot after 60 sec if bootcmd fails */
 441 #define CONFIG_RESET_TO_RETRY
 442 #define CONFIG_BOOT_RETRY_TIME 60
 443
 444 #endif  /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */