2 * siemens am33x common board options
3 * (C) Copyright 2013 Siemens Schweiz AG
4 * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
7 * U-Boot file:/include/configs/am335x_evm.h
9 * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
11 * SPDX-License-Identifier: GPL-2.0+
14 #ifndef __CONFIG_SIEMENS_AM33X_COMMON_H
15 #define __CONFIG_SIEMENS_AM33X_COMMON_H
20 #include <asm/arch/omap.h>
22 #define CONFIG_DMA_COHERENT
23 #define CONFIG_DMA_COHERENT_SIZE (1 << 20)
25 #define CONFIG_ENV_SIZE (0x2000)
26 #define CONFIG_SYS_MALLOC_LEN (16 * 1024 * 1024)
27 #define CONFIG_SYS_LONGHELP /* undef to save memory */
28 #define CONFIG_SYS_NO_FLASH
29 #ifdef CONFIG_SIEMENS_MACH_TYPE
30 #define CONFIG_MACH_TYPE CONFIG_SIEMENS_MACH_TYPE
33 #define CONFIG_CMDLINE_TAG /* enable passing of ATAGs */
34 #define CONFIG_SETUP_MEMORY_TAGS
35 #define CONFIG_INITRD_TAG
37 /* commands to include */
39 #define CONFIG_ENV_VARS_UBOOT_CONFIG
40 #ifndef CONFIG_SPL_BUILD
41 #define CONFIG_ROOTPATH "/opt/eldk"
44 #define CONFIG_ENV_OVERWRITE 1
45 #define CONFIG_ENV_IS_NOWHERE
47 #define CONFIG_SYS_LONGHELP
48 #define CONFIG_CMDLINE_EDITING
49 #define CONFIG_AUTO_COMPLETE
50 #define CONFIG_SYS_AUTOLOAD "yes"
53 #define V_OSCK 24000000 /* Clock output from T2 */
54 #define V_SCLK (V_OSCK)
56 /* We set the max number of command args high to avoid HUSH bugs. */
57 #define CONFIG_SYS_MAXARGS 32
59 /* Console I/O Buffer Size */
60 #define CONFIG_SYS_CBSIZE 1024
62 /* Print Buffer Size */
63 #define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE \
64 + sizeof(CONFIG_SYS_PROMPT) + 16)
66 /* Boot Argument Buffer Size */
67 #define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
70 * memtest works on 8 MB in DRAM after skipping 32MB from
71 * start addr of ram disk
73 #define CONFIG_SYS_MEMTEST_START (PHYS_DRAM_1 + (64 * 1024 * 1024))
74 #define CONFIG_SYS_MEMTEST_END (CONFIG_SYS_MEMTEST_START \
77 #define CONFIG_SYS_LOAD_ADDR 0x81000000 /* Default load address */
79 #define CONFIG_GENERIC_MMC
80 #define CONFIG_DOS_PARTITION
83 #define CONFIG_OMAP3_SPI
84 #define CONFIG_MTD_DEVICE
85 #define CONFIG_SF_DEFAULT_SPEED (75000000)
87 /* Physical Memory Map */
88 #define CONFIG_NR_DRAM_BANKS 1 /* 1 bank of DRAM */
89 #define PHYS_DRAM_1 0x80000000 /* DRAM Bank #1 */
91 #define CONFIG_SYS_SDRAM_BASE PHYS_DRAM_1
92 #define CONFIG_SYS_INIT_SP_ADDR (NON_SECURE_SRAM_END - \
93 GENERATED_GBL_DATA_SIZE)
94 /* Platform/Board specific defs */
95 #define CONFIG_SYS_TIMERBASE 0x48040000 /* Use Timer2 */
96 #define CONFIG_SYS_PTV 2 /* Divisor: 2^(PTV+1) => 8 */
98 /* NS16550 Configuration */
99 #ifdef CONFIG_SPL_BUILD
100 #define CONFIG_SYS_NS16550_SERIAL
101 #define CONFIG_SYS_NS16550_REG_SIZE (-4)
103 #define CONFIG_SYS_NS16550_CLK (48000000)
104 #define CONFIG_SYS_NS16550_COM1 0x44e09000
105 #define CONFIG_SYS_NS16550_COM4 0x481a6000
107 #define CONFIG_BAUDRATE 115200
109 #define CONFIG_SERIAL1 1
110 #define CONFIG_CONS_INDEX 1
112 /* I2C Configuration */
114 #define CONFIG_SYS_I2C
115 #define CONFIG_SYS_OMAP24_I2C_SPEED 100000
116 #define CONFIG_SYS_OMAP24_I2C_SLAVE 1
117 #define CONFIG_SYS_I2C_OMAP24XX
119 /* Defines for SPL */
120 #define CONFIG_SPL_FRAMEWORK
121 #define CONFIG_SPL_TEXT_BASE 0x402F0400
122 #define CONFIG_SPL_MAX_SIZE (SRAM_SCRATCH_SPACE_ADDR - \
123 CONFIG_SPL_TEXT_BASE)
125 #define CONFIG_SPL_BSS_START_ADDR 0x80000000
126 #define CONFIG_SPL_BSS_MAX_SIZE 0x80000 /* 512 KB */
128 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION 1
129 #define CONFIG_SPL_FS_LOAD_PAYLOAD_NAME "u-boot.img"
130 #define CONFIG_FS_FAT
132 #define CONFIG_SPL_SPI_LOAD
133 #define CONFIG_SYS_SPI_U_BOOT_OFFS 0x20000
135 #define CONFIG_SPL_LDSCRIPT "arch/arm/mach-omap2/am33xx/u-boot-spl.lds"
137 #define CONFIG_SPL_BOARD_INIT
138 #define CONFIG_SPL_NAND_AM33XX_BCH
139 #define CONFIG_SPL_NAND_BASE
140 #define CONFIG_SPL_NAND_DRIVERS
141 #define CONFIG_SPL_NAND_ECC
142 #define CONFIG_SYS_NAND_ONFI_DETECTION
143 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
144 #define CONFIG_SYS_NAND_PAGE_COUNT (CONFIG_SYS_NAND_BLOCK_SIZE / \
145 CONFIG_SYS_NAND_PAGE_SIZE)
146 #define CONFIG_SYS_NAND_PAGE_SIZE 2048
147 #define CONFIG_SYS_NAND_OOBSIZE 64
148 #define CONFIG_SYS_NAND_BLOCK_SIZE (128*1024)
149 #define CONFIG_SYS_NAND_BAD_BLOCK_POS NAND_LARGE_BADBLOCK_POS
150 #define CONFIG_SYS_NAND_ECCPOS { 2, 3, 4, 5, 6, 7, 8, 9, \
151 10, 11, 12, 13, 14, 15, 16, 17, \
152 18, 19, 20, 21, 22, 23, 24, 25, \
153 26, 27, 28, 29, 30, 31, 32, 33, \
154 34, 35, 36, 37, 38, 39, 40, 41, \
155 42, 43, 44, 45, 46, 47, 48, 49, \
156 50, 51, 52, 53, 54, 55, 56, 57, }
158 #define CONFIG_SYS_NAND_ECCSIZE 512
159 #define CONFIG_SYS_NAND_ECCBYTES 14
160 #define CONFIG_NAND_OMAP_ECCSCHEME OMAP_ECC_BCH8_CODE_HW
162 #define CONFIG_SYS_NAND_ECCSTEPS 4
163 #define CONFIG_SYS_NAND_ECCTOTAL (CONFIG_SYS_NAND_ECCBYTES * \
164 CONFIG_SYS_NAND_ECCSTEPS)
166 #define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_TEXT_BASE
168 #define CONFIG_SYS_NAND_U_BOOT_OFFS 0x80000
171 * 1MB into the SDRAM to allow for SPL's bss at the beginning of SDRAM
172 * 64 bytes before this address should be set aside for u-boot.img's
173 * header. That is 0x800FFFC0--0x80100000 should not be used for any
176 #define CONFIG_SYS_TEXT_BASE 0x80100000
177 #define CONFIG_SYS_SPL_MALLOC_START 0x80208000
178 #define CONFIG_SYS_SPL_MALLOC_SIZE 0x100000
181 * Since SPL did pll and ddr initialization for us,
182 * we don't need to do it twice.
184 #ifndef CONFIG_SPL_BUILD
185 #define CONFIG_SKIP_LOWLEVEL_INIT
188 #ifndef CONFIG_SPL_BUILD
192 #define CONFIG_USB_MUSB_DSPS
193 #define CONFIG_USB_MUSB_PIO_ONLY
194 #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT
195 #undef CONFIG_USB_GADGET_DUALSPEED
197 #define CONFIG_AM335X_USB0
198 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL
199 #define CONFIG_AM335X_USB1
200 #define CONFIG_AM335X_USB1_MODE MUSB_HOST
202 #ifdef CONFIG_USB_MUSB_GADGET
203 #define CONFIG_USB_ETHER
204 #define CONFIG_USB_ETH_RNDIS
205 #define CONFIG_USBNET_HOST_ADDR "de:ad:be:af:00:00"
206 #endif /* CONFIG_USB_MUSB_GADGET */
208 /* USB DRACO ID as default */
209 #define CONFIG_USBD_HS
211 /* USB Device Firmware Update support */
212 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (1 << 20)
213 #define DFU_MANIFEST_POLL_TIMEOUT 25000
215 #endif /* CONFIG_SPL_BUILD */
218 * Default to using SPI for environment, etc. We have multiple copies
219 * of SPL as the ROM will check these locations.
220 * 0x0 - 0x20000 : First copy of SPL
221 * 0x20000 - 0x40000 : Second copy of SPL
222 * 0x40000 - 0x60000 : Third copy of SPL
223 * 0x60000 - 0x80000 : Fourth copy of SPL
224 * 0x80000 - 0xDF000 : U-Boot
225 * 0xDF000 - 0xE0000 : U-Boot Environment
226 * 0xE0000 - 0x442000 : Linux Kernel
227 * 0x442000 - 0x800000 : Userland
229 #if defined(CONFIG_SPI_BOOT)
230 # undef CONFIG_ENV_IS_NOWHERE
231 # define CONFIG_ENV_IS_IN_SPI_FLASH
232 # define CONFIG_ENV_SPI_MAX_HZ CONFIG_SF_DEFAULT_SPEED
233 # define CONFIG_ENV_OFFSET (892 << 10) /* 892 KiB in */
234 # define CONFIG_ENV_SECT_SIZE (4 << 10) /* 4 KB sectors */
235 #endif /* SPI support */
237 /* Unsupported features */
238 #undef CONFIG_USE_IRQ
240 #define CONFIG_DRIVER_TI_CPSW
242 #define CONFIG_PHY_GIGE
243 #define CONFIG_PHYLIB
244 #define CONFIG_BOOTP_DEFAULT
245 #define CONFIG_BOOTP_DNS
246 #define CONFIG_BOOTP_DNS2
247 #define CONFIG_BOOTP_SEND_HOSTNAME
248 #define CONFIG_BOOTP_GATEWAY
249 #define CONFIG_BOOTP_SUBNETMASK
250 #define CONFIG_NET_RETRY_COUNT 10
255 #define CONFIG_CMD_NAND
258 #ifndef CONFIG_SPL_BUILD
259 #define CONFIG_CMD_MTDPARTS
260 #define CONFIG_MTD_PARTITIONS
261 #define CONFIG_MTD_DEVICE
262 #define CONFIG_RBTREE
264 #define CONFIG_CMD_UBIFS
267 /* Commen environment */
268 #define CONFIG_PREBOOT
269 #define COMMON_ENV_DFU_ARGS "dfu_args=run bootargs_defaults;" \
270 "setenv bootargs ${bootargs};" \
271 "mtdparts default;" \
276 #define COMMON_ENV_NAND_BOOT \
277 "nand_boot=echo Booting from nand; " \
278 "if test ${upgrade_available} -eq 1; then " \
279 "if test ${bootcount} -gt ${bootlimit}; " \
281 "setenv upgrade_available 0;" \
282 "setenv ${partitionset_active} true;" \
283 "if test -n ${A}; then " \
284 "setenv partitionset_active B; " \
287 "if test -n ${B}; then " \
288 "setenv partitionset_active A; " \
294 "echo set ${partitionset_active}...;" \
297 #define COMMON_ENV_NAND_CMDS "flash_self=run nand_boot\0" \
298 "flash_self_test=setenv testargs test; " \
300 "dfu_start=echo Preparing for dfu mode ...; " \
303 #define COMMON_ENV_SETTINGS \
305 "project_dir=targetdir\0" \
306 "upgrade_available=0\0" \
307 "altbootcmd=run bootcmd\0" \
309 "partitionset_active=A\0" \
310 "loadaddr=0x82000000\0" \
311 "kloadaddr=0x81000000\0" \
312 "script_addr=0x81900000\0" \
313 "console=console=ttyMTD,mtdoops console=ttyO0,115200n8 panic=5\0" \
314 "nfsopts=nolock rw\0" \
316 "bootenv=uEnv.txt\0" \
317 "bootargs_defaults=setenv bootargs " \
318 "console=${console} " \
321 "siemens_help=echo; "\
322 "echo Type 'run flash_self' to use kernel and root " \
323 "filesystem on memory; echo Type 'run flash_self_test' to " \
324 "use kernel and root filesystem on memory, boot in test " \
325 "mode; echo Not ready yet: 'run flash_nfs' to use kernel " \
326 "from memory and root filesystem over NFS; echo Type " \
327 "'run net_nfs' to get Kernel over TFTP and mount root " \
328 "filesystem over NFS; " \
329 "echo Set partitionset_active variable to 'A' " \
330 "or 'B' to select kernel and rootfs partition; " \
335 * Variant 1 partition layout
337 *| name | size | address area |
338 *-------------------------------------------------------
339 *| spl | 128.000 KiB | 0x 0..0x 1ffff |
340 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff |
341 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff |
342 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff |
343 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
344 *| uboot.env | 128.000 KiB | 0x 260000..0x 27ffff |
345 *| kernel_a | 5.000 MiB | 0x 280000..0x 77ffff |
346 *| kernel_b | 5.000 MiB | 0x 780000..0x c7ffff |
347 *| mtdoops | 8.000 MiB | 0x c80000..0x 147ffff |
348 *| rootfs | 235.500 MiB | 0x 1480000..0x fffffff |
349 *-------------------------------------------------------
351 #define MTDIDS_NAME_STR "omap2-nand.0"
352 #define MTDIDS_DEFAULT "nand0=" MTDIDS_NAME_STR
353 #define MTDPARTS_DEFAULT_V1 "mtdparts=" MTDIDS_NAME_STR ":" \
355 "128k(spl.backup1)," \
356 "128k(spl.backup2)," \
357 "128k(spl.backup3)," \
365 #define DFU_ALT_INFO_NAND_V1 \
367 "spl.backup1 part 0 2;" \
368 "spl.backup2 part 0 3;" \
369 "spl.backup3 part 0 4;" \
371 "u-boot.env part 0 6;" \
372 "kernel_a part 0 7;" \
373 "kernel_b part 0 8;" \
374 "rootfs partubi 0 10"
376 #define CONFIG_ENV_SETTINGS_NAND_V1 \
377 "nand_active_ubi_vol=rootfs_a\0" \
378 "nand_active_ubi_vol_A=rootfs_a\0" \
379 "nand_active_ubi_vol_B=rootfs_b\0" \
380 "nand_root_fs_type=ubifs rootwait=1\0" \
381 "nand_src_addr=0x280000\0" \
382 "nand_src_addr_A=0x280000\0" \
383 "nand_src_addr_B=0x780000\0" \
384 "nand_args=run bootargs_defaults;" \
385 "mtdparts default;" \
386 "setenv ${partitionset_active} true;" \
387 "if test -n ${A}; then " \
388 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_A};" \
389 "setenv nand_src_addr ${nand_src_addr_A};" \
391 "if test -n ${B}; then " \
392 "setenv nand_active_ubi_vol ${nand_active_ubi_vol_B};" \
393 "setenv nand_src_addr ${nand_src_addr_B};" \
395 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
396 "ubi.mtd=9,${ubi_off};" \
397 "setenv bootargs ${bootargs} " \
398 "root=${nand_root} noinitrd ${mtdparts} " \
399 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
400 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
402 COMMON_ENV_DFU_ARGS \
403 "dfu_alt_info=" DFU_ALT_INFO_NAND_V1 "\0" \
404 COMMON_ENV_NAND_BOOT \
405 "nand read.i ${kloadaddr} ${nand_src_addr} " \
406 "${nand_img_size}; bootm ${kloadaddr}\0" \
409 #define CONFIG_ENV_SETTINGS_V1 \
410 COMMON_ENV_SETTINGS \
411 "net_args=run bootargs_defaults;" \
412 "mtdparts default;" \
413 "setenv bootfile ${project_dir}/kernel/uImage;" \
414 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
415 "setenv bootargs ${bootargs} " \
416 "root=/dev/nfs ${mtdparts} " \
417 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
418 "ip=${ipaddr}:${serverip}:" \
419 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
420 "net_nfs=echo Booting from network ...; " \
422 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
423 "bootm ${kloadaddr}\0"
426 * Variant 2 partition layout
427 * chip-size = 256MiB or 512 MiB
428 *| name | size | address area |
429 *-------------------------------------------------------
430 *| spl | 128.000 KiB | 0x 0..0x 1ffff |
431 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff |
432 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff |
433 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff |
434 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
435 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
436 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
437 *| mtdoops | 512.000 KiB | 0x 360000..0x 3dffff |
438 *| (256) rootfs | 252.125 MiB | 0x 3E0000..0x fffffff |
439 *| (512) rootfs | 508.125 MiB | 0x 3E0000..0x1fffffff |
440 *-------------------------------------------------------
443 #define MTDPARTS_DEFAULT_V2 "mtdparts=" MTDIDS_NAME_STR ":" \
445 "128k(spl.backup1)," \
446 "128k(spl.backup2)," \
447 "128k(spl.backup3)," \
449 "512k(u-boot.env0)," \
450 "512k(u-boot.env1)," \
454 #define DFU_ALT_INFO_NAND_V2 \
456 "spl.backup1 part 0 2;" \
457 "spl.backup2 part 0 3;" \
458 "spl.backup3 part 0 4;" \
460 "u-boot.env0 part 0 6;" \
461 "u-boot.env1 part 0 7;" \
462 "rootfs partubi 0 9" \
464 #define CONFIG_ENV_SETTINGS_NAND_V2 \
465 "nand_active_ubi_vol=rootfs_a\0" \
466 "rootfs_name=rootfs\0" \
467 "kernel_name=uImage\0"\
468 "nand_root_fs_type=ubifs rootwait=1\0" \
469 "nand_args=run bootargs_defaults;" \
470 "mtdparts default;" \
471 "setenv ${partitionset_active} true;" \
472 "if test -n ${A}; then " \
473 "setenv nand_active_ubi_vol ${rootfs_name}_a;" \
475 "if test -n ${B}; then " \
476 "setenv nand_active_ubi_vol ${rootfs_name}_b;" \
478 "setenv nand_root ubi0:${nand_active_ubi_vol} rw " \
479 "ubi.mtd=rootfs,2048;" \
480 "setenv bootargs ${bootargs} " \
481 "root=${nand_root} noinitrd ${mtdparts} " \
482 "rootfstype=${nand_root_fs_type} ip=${ip_method} " \
483 "console=ttyMTD,mtdoops console=ttyO0,115200n8 mtdoops.mtddev" \
485 COMMON_ENV_DFU_ARGS \
486 "dfu_alt_info=" DFU_ALT_INFO_NAND_V2 "\0" \
487 COMMON_ENV_NAND_BOOT \
488 "ubi part rootfs ${ubi_off};" \
489 "ubifsmount ubi0:${nand_active_ubi_vol};" \
490 "ubifsload ${kloadaddr} boot/${kernel_name};" \
491 "ubifsload ${loadaddr} boot/${dtb_name}.dtb;" \
492 "bootm ${kloadaddr} - ${loadaddr}\0" \
493 "nand_boot_backup=ubifsload ${loadaddr} boot/am335x-draco.dtb;" \
494 "bootm ${kloadaddr} - ${loadaddr}\0" \
497 #define CONFIG_ENV_SETTINGS_V2 \
498 COMMON_ENV_SETTINGS \
499 "net_args=run bootargs_defaults;" \
500 "mtdparts default;" \
501 "setenv bootfile ${project_dir}/kernel/uImage;" \
502 "setenv bootdtb ${project_dir}/kernel/dtb;" \
503 "setenv rootpath /home/projects/${project_dir}/rootfs;" \
504 "setenv bootargs ${bootargs} " \
505 "root=/dev/nfs ${mtdparts} " \
506 "nfsroot=${serverip}:${rootpath},${nfsopts} " \
507 "ip=${ipaddr}:${serverip}:" \
508 "${gatewayip}:${netmask}:${hostname}:eth0:off\0" \
509 "net_nfs=echo Booting from network ...; " \
511 "tftpboot ${kloadaddr} ${serverip}:${bootfile}; " \
512 "tftpboot ${loadaddr} ${serverip}:${bootdtb}; " \
513 "bootm ${kloadaddr} - ${loadaddr}\0"
516 * Variant 3 partition layout
518 *| name | size | address area |
519 *-------------------------------------------------------
520 *| spl | 128.000 KiB | 0x 0..0x 1ffff |
521 *| spl.backup1 | 128.000 KiB | 0x 20000..0x 3ffff |
522 *| spl.backup2 | 128.000 KiB | 0x 40000..0x 5ffff |
523 *| spl.backup3 | 128.000 KiB | 0x 60000..0x 7ffff |
524 *| u-boot | 1.875 MiB | 0x 80000..0x 25ffff |
525 *| uboot.env0 | 512.000 KiB | 0x 260000..0x 2Dffff |
526 *| uboot.env1 | 512.000 KiB | 0x 2E0000..0x 35ffff |
527 *| rootfs | 300.000 MiB | 0x 360000..0x12f5ffff |
528 *| mtdoops | 512.000 KiB | 0x12f60000..0x12fdffff |
529 *|configuration | 104.125 MiB | 0x12fe0000..0x1fffffff |
530 *-------------------------------------------------------
533 #define MTDPARTS_DEFAULT_V3 "mtdparts=" MTDIDS_NAME_STR ":" \
535 "128k(spl.backup1)," \
536 "128k(spl.backup2)," \
537 "128k(spl.backup3)," \
539 "512k(u-boot.env0)," \
540 "512k(u-boot.env1)," \
545 #define CONFIG_NAND_OMAP_GPMC
546 #define CONFIG_NAND_OMAP_ELM
547 #define CONFIG_SYS_NAND_BASE (0x08000000) /* physical address */
548 /* to access nand at */
550 #define CONFIG_SYS_MAX_NAND_DEVICE 1 /* Max number of NAND
552 #if !defined(CONFIG_SPI_BOOT)
553 #undef CONFIG_ENV_IS_NOWHERE
554 #define CONFIG_ENV_IS_IN_NAND
555 #define CONFIG_ENV_OFFSET 0x260000 /* environment starts here */
556 #define CONFIG_SYS_ENV_SECT_SIZE (128 << 10) /* 128 KiB */
560 #define CONFIG_OMAP_GPIO
562 /* Gpio cmd support */
565 #define CONFIG_HW_WATCHDOG
567 /* Reboot after 60 sec if bootcmd fails */
568 #define CONFIG_RESET_TO_RETRY
569 #define CONFIG_BOOT_RETRY_TIME 60
571 #define CONFIG_BOOTCOUNT_LIMIT
572 #define CONFIG_BOOTCOUNT_ENV
574 #endif /* ! __CONFIG_SIEMENS_AM33X_COMMON_H */