include/configs/secomx6quq7.h

   1 /*
   2  * Copyright (C) 2013 Seco S.r.l
   3  *
   4  * Configuration settings for the Seco Boards.
   5  *
   6  * SPDX-License-Identifier:     GPL-2.0+
   7  */
   8
   9 #ifndef __CONFIG_H
  10 #define __CONFIG_H
  11
  12 #include "mx6_common.h"
  13
  14 #define CONFIG_BOARD_REVISION_TAG
  15
  16 /* Size of malloc() pool */
  17 #define CONFIG_SYS_MALLOC_LEN           (10 * SZ_1M)
  18
  19 #define CONFIG_MXC_UART
  20 #define CONFIG_MXC_UART_BASE            UART2_BASE
  21
  22 #define CONFIG_SYS_MEMTEST_START        0x10000000
  23 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_MEMTEST_START + 500 * SZ_1M)
  24
  25 /* MMC Configuration */
  26 #define CONFIG_SYS_FSL_USDHC_NUM        2
  27 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
  28
  29 /* Ethernet Configuration */
  30 #define CONFIG_FEC_MXC
  31 #define CONFIG_MII
  32 #define IMX_FEC_BASE                    ENET_BASE_ADDR
  33 #define CONFIG_FEC_XCV_TYPE             RGMII
  34 #define CONFIG_ETHPRIME                 "FEC"
  35 #define CONFIG_FEC_MXC_PHYADDR          6
  36 #define CONFIG_PHY_MICREL
  37 #define CONFIG_PHY_MICREL_KSZ90X1
  38
  39 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  40         "netdev=eth0\0"                                                 \
  41         "ethprime=FEC0\0"                                               \
  42         "netdev=eth0\0"                                                 \
  43         "ethprime=FEC0\0"                                               \
  44         "uboot=u-boot.bin\0"                                            \
  45         "kernel=uImage\0"                                               \
  46         "nfsroot=/opt/eldk/arm\0"                                       \
  47         "ip_local=10.0.0.5::10.0.0.1:255.255.255.0::eth0:off\0"         \
  48         "ip_server=10.0.0.1\0"                                          \
  49         "nfs_path=/targetfs \0"                                         \
  50         "memory=mem=1024M\0"                                            \
  51         "bootdev=mmc dev 0; ext2load mmc 0:1\0"                         \
  52         "root=root=/dev/mmcblk0p1\0"                                    \
  53         "option=rootwait rw fixrtc rootflags=barrier=1\0"               \
  54         "cpu_freq=arm_freq=996\0"                                       \
  55         "setbootargs=setenv bootargs console=ttymxc1,115200 ${root}"    \
  56                 " ${option} ${memory} ${cpu_freq}\0"                    \
  57         "setbootargs_nfs=setenv bootargs console=ttymxc1,115200"        \
  58                 " root=/dev/nfs  nfsroot=${ip_server}:${nfs_path}"      \
  59                 " nolock,wsize=4096,rsize=4096  ip=:::::eth0:dhcp"      \
  60                 " ${memory} ${cpu_freq}\0"                              \
  61         "setbootdev=setenv boot_dev ${bootdev} 10800000 /boot/uImage\0" \
  62         "bootcmd=run setbootargs; run setbootdev; run boot_dev;"        \
  63                 " bootm 0x10800000\0"                                   \
  64         "stdin=serial\0"                                                \
  65         "stdout=serial\0"                                               \
  66         "stderr=serial\0"
  67
  68 /* Print Buffer Size */
  69 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE +            \
  70                                          sizeof(CONFIG_SYS_PROMPT) + 16)
  71
  72 #define CONFIG_SYS_HZ                   1000
  73
  74 /* Physical Memory Map */
  75 #define CONFIG_NR_DRAM_BANKS            1
  76 #define PHYS_SDRAM                      MMDC0_ARB_BASE_ADDR
  77 #define PHYS_SDRAM_SIZE                 (2u * 1024 * 1024 * 1024)
  78
  79 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM
  80 #define CONFIG_SYS_INIT_RAM_ADDR        IRAM_BASE_ADDR
  81 #define CONFIG_SYS_INIT_RAM_SIZE        IRAM_SIZE
  82
  83 #define CONFIG_SYS_INIT_SP_OFFSET       \
  84         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
  85 #define CONFIG_SYS_INIT_SP_ADDR         \
  86         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
  87
  88 /* Environment organization */
  89 #define CONFIG_ENV_SIZE                 (8 * 1024)
  90
  91 #if defined(CONFIG_ENV_IS_IN_MMC)
  92         #define CONFIG_ENV_OFFSET               (6 * 128 * 1024)
  93         #define CONFIG_SYS_MMC_ENV_DEV          0
  94         #define CONFIG_DYNAMIC_MMC_DEVNO
  95 #endif
  96
  97 #endif /* __CONFIG_H */