Merge git://git.denx.de/u-boot-sunxi
[platform/kernel/u-boot.git] / include / configs / s5pc210_universal.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2010 Samsung Electronics
4  * Minkyu Kang <mk7.kang@samsung.com>
5  *
6  * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
7  */
8
9 #ifndef __CONFIG_UNIVERSAL_H
10 #define __CONFIG_UNIVERSAL_H
11
12 #include <configs/exynos4-common.h>
13
14 #define CONFIG_TIZEN                    /* TIZEN lib */
15
16 /* Keep L2 Cache Disabled */
17 #define CONFIG_SYS_L2CACHE_OFF          1
18
19 /* Universal has 2 banks of DRAM */
20 #define CONFIG_NR_DRAM_BANKS            2
21 #define CONFIG_SYS_SDRAM_BASE           0x40000000
22 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
23
24 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
25
26 /* select serial console configuration */
27 #define CONFIG_SERIAL2
28
29 /* Console configuration */
30
31 #define CONFIG_BOOTCOMMAND              "run mmcboot"
32 #define CONFIG_DEFAULT_CONSOLE          "ttySAC1,115200n8"
33
34 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
35                                         - GENERATED_GBL_DATA_SIZE)
36
37 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
38
39 #define CONFIG_SYS_MONITOR_BASE 0x00000000
40
41 /* memtest works on */
42 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
43 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5000000)
44 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x4800000)
45
46 #define CONFIG_MTD_DEVICE
47 #define CONFIG_MTD_PARTITIONS
48
49 /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
50
51 #define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT
52
53 #define MBRPARTS_DEFAULT        "20M(permanent)"\
54                                 ",20M(boot)"\
55                                 ",1G(system)"\
56                                 ",100M(swap)"\
57                                 ",-(UMS)\0"
58
59 #define CONFIG_ENV_UBI_MTD      " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
60 #define CONFIG_BOOTBLOCK        "10"
61 #define CONFIG_UBIBLOCK         "9"
62
63 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
64 #define CONFIG_ENV_SIZE                 4096
65 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
66
67 #define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc "
68 #define CONFIG_ENV_FLASHBOOT    CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
69                                 "${mtdparts}"
70
71 #define CONFIG_ENV_COMMON_BOOT  "${console} ${meminfo}"
72
73 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
74         "updateb=" \
75                 "onenand erase 0x0 0x100000;" \
76                 "onenand write 0x42008000 0x0 0x100000\0" \
77         "updatek=" \
78                 "onenand erase 0xc00000 0x500000;" \
79                 "onenand write 0x41008000 0xc00000 0x500000\0" \
80         "bootk=" \
81                 "run loaduimage; bootm 0x40007FC0\0" \
82         "updatebackup=" \
83                 "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
84                 "mmc dev 0 0\0" \
85         "updatebootb=" \
86                 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
87         "lpj=lpj=3981312\0" \
88         "ubifsboot=" \
89                 "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
90                 CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
91                 CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
92         "tftpboot=" \
93                 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
94                 CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
95                 CONFIG_ENV_COMMON_BOOT \
96                 "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
97         "nfsboot=" \
98                 "set bootargs root=/dev/nfs rw " \
99                 "nfsroot=${nfsroot},nolock,tcp " \
100                 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
101                 "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
102                 "; run bootk\0" \
103         "ramfsboot=" \
104                 "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
105                 "${console} ${meminfo} " \
106                 "initrd=0x43000000,8M ramdisk=8192\0" \
107         "mmcboot=" \
108                 "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
109                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
110                 "run loaduimage; bootm 0x40007FC0\0" \
111         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
112         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
113         "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
114         "verify=n\0" \
115         "rootfstype=ext4\0" \
116         "console=" CONFIG_DEFAULT_CONSOLE "\0" \
117         "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
118         "mbrparts=" MBRPARTS_DEFAULT \
119         "meminfo=crashkernel=32M@0x50000000\0" \
120         "nfsroot=/nfsroot/arm\0" \
121         "bootblock=" CONFIG_BOOTBLOCK "\0" \
122         "ubiblock=" CONFIG_UBIBLOCK" \0" \
123         "ubi=enabled\0" \
124         "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
125         "mmcdev=0\0" \
126         "mmcbootpart=2\0" \
127         "mmcrootpart=3\0" \
128         "opts=always_resume=1"
129
130 #define CONFIG_USE_ONENAND_BOARD_INIT
131 #define CONFIG_SAMSUNG_ONENAND
132 #define CONFIG_SYS_ONENAND_BASE         0x0C000000
133
134 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
135
136 /*
137  * SPI Settings
138  */
139 #define CONFIG_SOFT_SPI
140
141 #ifndef __ASSEMBLY__
142 void universal_spi_scl(int bit);
143 void universal_spi_sda(int bit);
144 int universal_spi_read(void);
145 #endif
146
147 /* Common misc for Samsung */
148 #define CONFIG_MISC_COMMON
149
150 #define CONFIG_MISC_INIT_R
151
152 /* Download menu - Samsung common */
153 #define CONFIG_LCD_MENU
154
155 /* Download menu - definitions for check keys */
156 #ifndef __ASSEMBLY__
157
158 #define KEY_PWR_PMIC_NAME               "MAX8998_PMIC"
159 #define KEY_PWR_STATUS_REG              MAX8998_REG_STATUS1
160 #define KEY_PWR_STATUS_MASK             (1 << 7)
161 #define KEY_PWR_INTERRUPT_REG           MAX8998_REG_IRQ1
162 #define KEY_PWR_INTERRUPT_MASK          (1 << 7)
163
164 #define KEY_VOL_UP_GPIO                 EXYNOS4_GPIO_X20
165 #define KEY_VOL_DOWN_GPIO               EXYNOS4_GPIO_X21
166 #endif /* __ASSEMBLY__ */
167
168 /* LCD console */
169 #define LCD_BPP                 LCD_COLOR16
170
171 /*
172  * LCD Settings
173  */
174 #define CONFIG_BMP_16BPP
175 #define CONFIG_LD9040
176 #define CONFIG_VIDEO_BMP_GZIP
177 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
178
179 #endif  /* __CONFIG_H */