include/configs/s5pc210_universal.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2010 Samsung Electronics
   4  * Minkyu Kang <mk7.kang@samsung.com>
   5  *
   6  * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
   7  */
   8
   9 #ifndef __CONFIG_UNIVERSAL_H
  10 #define __CONFIG_UNIVERSAL_H
  11
  12 #include <configs/exynos4-common.h>
  13
  14 #define CONFIG_TIZEN                    /* TIZEN lib */
  15
  16 /* Keep L2 Cache Disabled */
  17 #define CONFIG_SYS_L2CACHE_OFF          1
  18
  19 /* Universal has 2 banks of DRAM */
  20 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  21 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  22
  23 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  24
  25 /* select serial console configuration */
  26 #define CONFIG_SERIAL2
  27
  28 /* Console configuration */
  29
  30 #define CONFIG_BOOTCOMMAND              "run mmcboot"
  31 #define CONFIG_DEFAULT_CONSOLE          "ttySAC1,115200n8"
  32
  33 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  34                                         - GENERATED_GBL_DATA_SIZE)
  35
  36 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  37
  38 #define CONFIG_SYS_MONITOR_BASE 0x00000000
  39
  40 /* memtest works on */
  41 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
  42 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x5000000)
  43 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x4800000)
  44
  45 /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
  46
  47 #define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT
  48
  49 #define MBRPARTS_DEFAULT        "20M(permanent)"\
  50                                 ",20M(boot)"\
  51                                 ",1G(system)"\
  52                                 ",100M(swap)"\
  53                                 ",-(UMS)\0"
  54
  55 #define CONFIG_ENV_UBI_MTD      " ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7"
  56 #define CONFIG_BOOTBLOCK        "10"
  57 #define CONFIG_UBIBLOCK         "9"
  58
  59 #define CONFIG_SYS_MMC_ENV_DEV          CONFIG_MMC_DEFAULT_DEV
  60 #define CONFIG_ENV_SIZE                 4096
  61 #define CONFIG_ENV_OFFSET               ((32 - 4) << 10) /* 32KiB - 4KiB */
  62
  63 #define CONFIG_ENV_UBIFS_OPTION " rootflags=bulk_read,no_chk_data_crc "
  64 #define CONFIG_ENV_FLASHBOOT    CONFIG_ENV_UBI_MTD CONFIG_ENV_UBIFS_OPTION \
  65                                 "${mtdparts}"
  66
  67 #define CONFIG_ENV_COMMON_BOOT  "${console} ${meminfo}"
  68
  69 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  70         "updateb=" \
  71                 "onenand erase 0x0 0x100000;" \
  72                 "onenand write 0x42008000 0x0 0x100000\0" \
  73         "updatek=" \
  74                 "onenand erase 0xc00000 0x500000;" \
  75                 "onenand write 0x41008000 0xc00000 0x500000\0" \
  76         "bootk=" \
  77                 "run loaduimage; bootm 0x40007FC0\0" \
  78         "updatebackup=" \
  79                 "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
  80                 "mmc dev 0 0\0" \
  81         "updatebootb=" \
  82                 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
  83         "lpj=lpj=3981312\0" \
  84         "ubifsboot=" \
  85                 "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
  86                 CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
  87                 CONFIG_ENV_COMMON_BOOT "; run bootk\0" \
  88         "tftpboot=" \
  89                 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
  90                 CONFIG_ENV_FLASHBOOT " ${opts} ${lcdinfo} " \
  91                 CONFIG_ENV_COMMON_BOOT \
  92                 "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
  93         "nfsboot=" \
  94                 "set bootargs root=/dev/nfs rw " \
  95                 "nfsroot=${nfsroot},nolock,tcp " \
  96                 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
  97                 "${netmask}:generic:usb0:off " CONFIG_ENV_COMMON_BOOT \
  98                 "; run bootk\0" \
  99         "ramfsboot=" \
 100                 "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
 101                 "${console} ${meminfo} " \
 102                 "initrd=0x43000000,8M ramdisk=8192\0" \
 103         "mmcboot=" \
 104                 "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
 105                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
 106                 "run loaduimage; bootm 0x40007FC0\0" \
 107         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
 108         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
 109         "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
 110         "verify=n\0" \
 111         "rootfstype=ext4\0" \
 112         "console=" CONFIG_DEFAULT_CONSOLE "\0" \
 113         "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
 114         "mbrparts=" MBRPARTS_DEFAULT \
 115         "meminfo=crashkernel=32M@0x50000000\0" \
 116         "nfsroot=/nfsroot/arm\0" \
 117         "bootblock=" CONFIG_BOOTBLOCK "\0" \
 118         "ubiblock=" CONFIG_UBIBLOCK" \0" \
 119         "ubi=enabled\0" \
 120         "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
 121         "mmcdev=0\0" \
 122         "mmcbootpart=2\0" \
 123         "mmcrootpart=3\0" \
 124         "opts=always_resume=1"
 125
 126 #define CONFIG_USE_ONENAND_BOARD_INIT
 127 #define CONFIG_SAMSUNG_ONENAND
 128 #define CONFIG_SYS_ONENAND_BASE         0x0C000000
 129
 130 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
 131
 132 /*
 133  * SPI Settings
 134  */
 135 #define CONFIG_SOFT_SPI
 136
 137 #ifndef __ASSEMBLY__
 138 void universal_spi_scl(int bit);
 139 void universal_spi_sda(int bit);
 140 int universal_spi_read(void);
 141 #endif
 142
 143 /* Common misc for Samsung */
 144 #define CONFIG_MISC_COMMON
 145
 146 /* Download menu - Samsung common */
 147 #define CONFIG_LCD_MENU
 148
 149 /* Download menu - definitions for check keys */
 150 #ifndef __ASSEMBLY__
 151
 152 #define KEY_PWR_PMIC_NAME               "MAX8998_PMIC"
 153 #define KEY_PWR_STATUS_REG              MAX8998_REG_STATUS1
 154 #define KEY_PWR_STATUS_MASK             (1 << 7)
 155 #define KEY_PWR_INTERRUPT_REG           MAX8998_REG_IRQ1
 156 #define KEY_PWR_INTERRUPT_MASK          (1 << 7)
 157
 158 #define KEY_VOL_UP_GPIO                 EXYNOS4_GPIO_X20
 159 #define KEY_VOL_DOWN_GPIO               EXYNOS4_GPIO_X21
 160 #endif /* __ASSEMBLY__ */
 161
 162 /* LCD console */
 163 #define LCD_BPP                 LCD_COLOR16
 164
 165 /*
 166  * LCD Settings
 167  */
 168 #define CONFIG_BMP_16BPP
 169 #define CONFIG_LD9040
 170 #define CONFIG_VIDEO_BMP_GZIP
 171 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
 172
 173 #endif  /* __CONFIG_H */