include/configs/s5pc210_universal.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2010 Samsung Electronics
   4  * Minkyu Kang <mk7.kang@samsung.com>
   5  *
   6  * Configuation settings for the SAMSUNG Universal (EXYNOS4210) board.
   7  */
   8
   9 #ifndef __CONFIG_UNIVERSAL_H
  10 #define __CONFIG_UNIVERSAL_H
  11
  12 #include <configs/exynos4-common.h>
  13
  14 #define CONFIG_TIZEN                    /* TIZEN lib */
  15
  16 /* Keep L2 Cache Disabled */
  17
  18 /* Universal has 2 banks of DRAM */
  19 #define CONFIG_SYS_SDRAM_BASE           0x40000000
  20 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
  21
  22 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
  23
  24 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_LOAD_ADDR \
  25                                         - GENERATED_GBL_DATA_SIZE)
  26
  27 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
  28
  29 /* Actual modem binary size is 16MiB. Add 2MiB for bad block handling */
  30
  31 #define NORMAL_MTDPARTS_DEFAULT CONFIG_MTDPARTS_DEFAULT
  32
  33 #define MBRPARTS_DEFAULT        "20M(permanent)"\
  34                                 ",20M(boot)"\
  35                                 ",1G(system)"\
  36                                 ",100M(swap)"\
  37                                 ",-(UMS)\0"
  38
  39 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  40         "updateb=" \
  41                 "onenand erase 0x0 0x100000;" \
  42                 "onenand write 0x42008000 0x0 0x100000\0" \
  43         "updatek=" \
  44                 "onenand erase 0xc00000 0x500000;" \
  45                 "onenand write 0x41008000 0xc00000 0x500000\0" \
  46         "bootk=" \
  47                 "run loaduimage; bootm 0x40007FC0\0" \
  48         "updatebackup=" \
  49                 "mmc dev 0 2; mmc write 0 0x42100000 0 0x200;" \
  50                 "mmc dev 0 0\0" \
  51         "updatebootb=" \
  52                 "mmc read 0 0x42100000 0x80 0x200; run updatebackup\0" \
  53         "lpj=lpj=3981312\0" \
  54         "ubifsboot=" \
  55                 "set bootargs root=ubi0!rootfs rootfstype=ubifs ${lpj} " \
  56                 "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \
  57                 "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \
  58                 "${lcdinfo} ${console} ${meminfo}; run bootk\0" \
  59         "tftpboot=" \
  60                 "set bootargs root=ubi0!rootfs rootfstype=ubifs " \
  61                 "ubi.mtd=${ubiblock} ubi.mtd=4 ubi.mtd=7 " \
  62                 "rootflags=bulk_read,no_chk_data_crc ${mtdparts} ${opts} " \
  63                 "${lcdinfo} ${console} ${meminfo}" \
  64                 "; tftp 0x40007FC0 uImage; bootm 0x40007FC0\0" \
  65         "nfsboot=" \
  66                 "set bootargs root=/dev/nfs rw " \
  67                 "nfsroot=${nfsroot},nolock,tcp " \
  68                 "ip=${ipaddr}:${serverip}:${gatewayip}:" \
  69                 "${netmask}:generic:usb0:off ${console} ${meminfo}" \
  70                 "; run bootk\0" \
  71         "ramfsboot=" \
  72                 "set bootargs root=/dev/ram0 rw rootfstype=ext2 " \
  73                 "${console} ${meminfo} " \
  74                 "initrd=0x43000000,8M ramdisk=8192\0" \
  75         "mmcboot=" \
  76                 "set bootargs root=/dev/mmcblk${mmcdev}p${mmcrootpart} " \
  77                 "${lpj} rootwait ${console} ${meminfo} ${opts} ${lcdinfo}; " \
  78                 "run loaduimage; bootm 0x40007FC0\0" \
  79         "bootchart=set opts init=/sbin/bootchartd; run bootcmd\0" \
  80         "boottrace=setenv opts initcall_debug; run bootcmd\0" \
  81         "mmcoops=mmc read 0 0x40000000 0x40 8; md 0x40000000 0x400\0" \
  82         "verify=n\0" \
  83         "rootfstype=ext4\0" \
  84         "console=console=ttySAC1,115200n8\0" \
  85         "mtdparts=" CONFIG_MTDPARTS_DEFAULT \
  86         "mbrparts=" MBRPARTS_DEFAULT \
  87         "meminfo=crashkernel=32M@0x50000000\0" \
  88         "nfsroot=/nfsroot/arm\0" \
  89         "bootblock=10\0" \
  90         "ubiblock=9\0" \
  91         "ubi=enabled\0" \
  92         "loaduimage=fatload mmc ${mmcdev}:${mmcbootpart} 0x40007FC0 uImage\0" \
  93         "mmcdev=0\0" \
  94         "mmcbootpart=2\0" \
  95         "mmcrootpart=3\0" \
  96         "opts=always_resume=1"
  97
  98 #define CONFIG_USE_ONENAND_BOARD_INIT
  99 #define CONFIG_SAMSUNG_ONENAND
 100 #define CONFIG_SYS_ONENAND_BASE         0x0C000000
 101
 102 #define CONFIG_USB_GADGET_DWC2_OTG_PHY
 103
 104 #ifndef __ASSEMBLY__
 105 void universal_spi_scl(int bit);
 106 void universal_spi_sda(int bit);
 107 int universal_spi_read(void);
 108 #endif
 109
 110 /* Common misc for Samsung */
 111 #define CONFIG_MISC_COMMON
 112
 113 /* Download menu - Samsung common */
 114 #define CONFIG_LCD_MENU
 115
 116 /* Download menu - definitions for check keys */
 117 #ifndef __ASSEMBLY__
 118
 119 #define KEY_PWR_PMIC_NAME               "MAX8998_PMIC"
 120 #define KEY_PWR_STATUS_REG              MAX8998_REG_STATUS1
 121 #define KEY_PWR_STATUS_MASK             (1 << 7)
 122 #define KEY_PWR_INTERRUPT_REG           MAX8998_REG_IRQ1
 123 #define KEY_PWR_INTERRUPT_MASK          (1 << 7)
 124
 125 #define KEY_VOL_UP_GPIO                 EXYNOS4_GPIO_X20
 126 #define KEY_VOL_DOWN_GPIO               EXYNOS4_GPIO_X21
 127 #endif /* __ASSEMBLY__ */
 128
 129 /* LCD console */
 130 #define LCD_BPP                 LCD_COLOR16
 131
 132 /*
 133  * LCD Settings
 134  */
 135 #define CONFIG_LD9040
 136 #define CONFIG_SYS_VIDEO_LOGO_MAX_SIZE ((500 * 160 * 4) + 54)
 137
 138 #endif  /* __CONFIG_H */