include/configs/s5p4418_nanopi2.h

   1 /* SPDX-License-Identifier: GPL-2.0+
   2  *
   3  * Copyright (C) Guangzhou FriendlyARM Computer Tech. Co., Ltd.
   4  * (http://www.friendlyarm.com)
   5  *
   6  * (C) Copyright 2016 Nexell
   7  * Hyejung Kwon <cjscld15@nexell.co.kr>
   8  *
   9  * Copyright (C) 2019  Stefan Bosch <stefan_b@posteo.net>
  10  */
  11
  12 #ifndef __CONFIG_H__
  13 #define __CONFIG_H__
  14
  15 #include <linux/sizes.h>
  16 #include <asm/arch/nexell.h>
  17
  18 /*-----------------------------------------------------------------------
  19  *  System memory Configuration
  20  */
  21 #define CFG_SYS_SDRAM_BASE              0x71000000
  22
  23 /*
  24  * "(0x40000000 - CONFIG_SYS_RESERVE_MEM_SIZE)" has been used in
  25  * u-boot nanopi2-v2016.01.
  26  * This is not working anymore because boot_fdt_add_mem_rsv_regions() in
  27  * common/image-fdt.c has been extended:
  28  * Also reserved-memory sections are marked as unusable.
  29  *
  30  * In friendlyArm Ubuntu 16.04 source arch/arm/boot/dts/s5p4418.dtsi:
  31  *        reserved-memory {
  32  *            #address-cells = <1>;
  33  *            #size-cells = <1>;
  34  *            ranges;
  35  *
  36  *            secure_memory@b0000000 {
  37  *                reg = <0xB0000000 0x1000000>;
  38  *                nop-map;
  39  *            };
  40  *        };
  41  *
  42  * arch_lmb_reserve() of arch/arm/lib/bootm.c:
  43  *     "Allocate space for command line and board info - ... below the current
  44  *      stack pointer."
  45  *      --> Memory allocated would overlap with "secure_memory@b0000000"
  46  *      --> lmb_add_region(rgn, base==0xb0000000, size==0x1000000) fails,
  47  *      boot output:
  48  *        ...
  49  *        Kernel image @ 0x71080000 [ 0x000000 - 0x60e628 ]
  50  *        ## Flattened Device Tree blob at 7a000000
  51  *           Booting using the fdt blob at 0x7a000000
  52  *        ERROR: reserving fdt memory region failed (addr=b0000000 size=1000000)
  53  *           Using Device Tree in place at 7a000000, end 7a00fbf0
  54  *
  55  *        Starting kernel ...
  56  *        ...
  57  */
  58 #define CFG_SYS_SDRAM_SIZE              (0xb0000000 - CFG_SYS_SDRAM_BASE)
  59
  60 #define BMP_LOAD_ADDR                   0x78000000
  61
  62 /* kernel load address */
  63 #define INITRD_START                    0x79000000
  64 #define KERNEL_DTB_ADDR                 0x7A000000
  65
  66 /*-----------------------------------------------------------------------
  67  *  High Level System Configuration
  68  */
  69 /* Not used: not need IRQ/FIQ stuff */
  70 #undef  CONFIG_USE_IRQ
  71 /* decrementer freq: 1ms ticks */
  72
  73 /*-----------------------------------------------------------------------
  74  *  System initialize options (board_init_f)
  75  */
  76 /* board_init_f->init_sequence, call arch_cpu_init */
  77
  78 /*-----------------------------------------------------------------------
  79  * serial console configuration
  80  */
  81 #define CONFIG_PL011_CLOCK              50000000
  82 #define CONFIG_PL01x_PORTS              {(void *)PHY_BASEADDR_UART0, \
  83                                          (void *)PHY_BASEADDR_UART1, \
  84                                          (void *)PHY_BASEADDR_UART2, \
  85                                          (void *)PHY_BASEADDR_UART3}
  86
  87 /*-----------------------------------------------------------------------
  88  * BACKLIGHT
  89  */
  90 #ifndef CONFIG_S5P4418_ONEWIRE
  91 #ifdef CONFIG_PWM_NX
  92 /* fallback to pwm */
  93 #define BACKLIGHT_CH            0
  94 #define BACKLIGHT_DIV           0
  95 #define BACKLIGHT_INV           0
  96 #define BACKLIGHT_DUTY          50
  97 #define BACKLIGHT_HZ            1000
  98 #endif
  99 #endif
 100
 101 /*-----------------------------------------------------------------------
 102  * VIDEO
 103  */
 104
 105 #ifdef CONFIG_VIDEO_LOGO
 106 #ifdef CONFIG_SPLASH_SCREEN
 107 #define SPLASH_FILE                     logo.bmp
 108 #endif
 109
 110 #endif
 111
 112 /*-----------------------------------------------------------------------
 113  * ENV
 114  */
 115 #define BLOADER_MMC                                             \
 116         "ext4load mmc ${rootdev}:${bootpart} "
 117
 118 #ifdef CONFIG_OF_BOARD_SETUP
 119 #define EXTRA_ENV_DTB_RESERVE                                   \
 120         "dtb_reserve="                                          \
 121         "if test -n \"$dtb_addr\"; then fdt addr $dtb_addr; fi\0"
 122 #else
 123 #define EXTRA_ENV_DTB_RESERVE                                   \
 124         "dtb_reserve="                                          \
 125         "if test -n \"$fb_addr\"; then "                        \
 126           "fdt addr $dtb_addr;"                                 \
 127           "fdt resize;"                                         \
 128           "fdt mk /reserved-memory display_reserved;"           \
 129           "fdt set /reserved-memory/display_reserved "          \
 130             "reg <$fb_addr 0x800000>;"                          \
 131         "fi;\0"
 132 #endif
 133
 134 #ifdef CONFIG_SPLASH_SCREEN
 135 #define EXTRA_ENV_BOOT_LOGO                                     \
 136         "splashimage=" __stringify(BMP_LOAD_ADDR)"\0"           \
 137         "splashfile=" __stringify(SPLASH_FILE)"\0"              \
 138         "splashpos=m,m\0"                                       \
 139         "fb_addr=\0"                                            \
 140         EXTRA_ENV_DTB_RESERVE
 141 #else
 142         #define EXTRA_ENV_BOOT_LOGO  EXTRA_ENV_DTB_RESERVE
 143 #endif
 144
 145 #define CONFIG_EXTRA_ENV_SETTINGS                               \
 146         "fdt_high=0xffffffff\0"                                 \
 147         "initrd_high=0xffffffff\0"                              \
 148         "rootdev=" __stringify(CONFIG_ROOT_DEV) "\0"            \
 149         "rootpart=" __stringify(CONFIG_ROOT_PART) "\0"          \
 150         "bootpart=" __stringify(CONFIG_BOOT_PART) "\0"          \
 151         "kernel=zImage\0"                                       \
 152         "loadaddr=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0"      \
 153         "dtb_name=s5p4418-nanopi2-rev01.dtb\0"                  \
 154         "dtb_addr=" __stringify(KERNEL_DTB_ADDR) "\0"           \
 155         "initrd_name=ramdisk.img\0"                             \
 156         "initrd_addr=" __stringify(INITRD_START) "\0"           \
 157         "initrd_size=0x600000\0"                                \
 158         "load_dtb="                                             \
 159                 BLOADER_MMC "${dtb_addr} ${dtb_name}; "         \
 160                 "run dtb_reserve\0"                             \
 161         "load_kernel="                                          \
 162                 BLOADER_MMC "${loadaddr} ${kernel}\0"           \
 163         "load_initrd="                                          \
 164                 BLOADER_MMC "${initrd_addr} ${initrd_name}; "   \
 165                 "setenv initrd_size 0x${filesize}\0"            \
 166         "mmcboot="                                              \
 167                 "run load_kernel; run load_initrd; run load_dtb; "      \
 168                 "bootz ${loadaddr} ${initrd_addr}:${initrd_size} "      \
 169                   "${dtb_addr}\0"                               \
 170         "bootcmd=run mmcboot\0"                                 \
 171         EXTRA_ENV_BOOT_LOGO
 172
 173 #endif /* __CONFIG_H__ */