usb: net: migrate USB Ethernet adapters to Kconfig
[platform/kernel/u-boot.git] / include / configs / rk3399_common.h
1 /*
2  * (C) Copyright 2016 Rockchip Electronics Co., Ltd
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __CONFIG_RK3399_COMMON_H
8 #define __CONFIG_RK3399_COMMON_H
9
10 #include "rockchip-common.h"
11
12 #define CONFIG_NR_DRAM_BANKS            1
13 #define CONFIG_ENV_SIZE                 0x2000
14 #define CONFIG_SYS_MALLOC_LEN           (32 << 20)
15 #define CONFIG_SYS_CBSIZE               1024
16 #define CONFIG_SKIP_LOWLEVEL_INIT
17 #define CONFIG_SPL_FRAMEWORK
18 #if defined(CONFIG_SPL_SPI_SUPPORT)
19 #define CONFIG_SPL_SPI_LOAD
20 #endif
21
22 #define COUNTER_FREQUENCY               24000000
23
24 #define CONFIG_SYS_NS16550_MEM32
25
26 #define CONFIG_SYS_TEXT_BASE            0x00200000
27 #define CONFIG_SYS_INIT_SP_ADDR         0x00300000
28 #define CONFIG_SYS_LOAD_ADDR            0x00800800
29 #define CONFIG_SPL_STACK                0xff8effff
30 #define CONFIG_SPL_TEXT_BASE            0xff8c2000
31 #define CONFIG_SPL_MAX_SIZE             0x30000 - 0x2000
32 /*  BSS setup */
33 #define CONFIG_SPL_BSS_START_ADDR       0xff8e0000
34 #define CONFIG_SPL_BSS_MAX_SIZE         0x10000
35
36 #define CONFIG_SYS_BOOTM_LEN    (64 << 20)      /* 64M */
37
38 /* MMC/SD IP block */
39 #define CONFIG_BOUNCE_BUFFER
40 #define CONFIG_ROCKCHIP_SDHCI_MAX_FREQ  200000000
41
42 #define CONFIG_SUPPORT_VFAT
43 #define CONFIG_FS_EXT4
44
45 /* RAW SD card / eMMC locations. */
46 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (128 << 10)
47
48 /* FAT sd card locations. */
49 #define CONFIG_SYS_MMCSD_FS_BOOT_PARTITION      1
50 #define CONFIG_SYS_SDRAM_BASE           0
51 #define SDRAM_MAX_SIZE                  0xf8000000
52 #define CONFIG_NR_DRAM_BANKS            1
53
54 #define CONFIG_SF_DEFAULT_SPEED 20000000
55
56 #ifndef CONFIG_SPL_BUILD
57
58 #define ENV_MEM_LAYOUT_SETTINGS \
59         "scriptaddr=0x00500000\0" \
60         "pxefile_addr_r=0x00600000\0" \
61         "fdt_addr_r=0x01f00000\0" \
62         "kernel_addr_r=0x02000000\0" \
63         "ramdisk_addr_r=0x04000000\0"
64
65 #include <config_distro_bootcmd.h>
66 #define CONFIG_EXTRA_ENV_SETTINGS \
67         ENV_MEM_LAYOUT_SETTINGS \
68         "partitions=" PARTS_DEFAULT \
69         BOOTENV
70
71 #endif
72
73 /* enable usb config for usb ether */
74
75 #endif