include/configs/qemu-mips64.h

   1 /*
   2  * (C) Copyright 2003
   3  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
   4  *
   5  * SPDX-License-Identifier:     GPL-2.0+
   6  */
   7
   8 /*
   9  * This file contains the configuration parameters for qemu-mips64 target.
  10  */
  11
  12 #ifndef __CONFIG_H
  13 #define __CONFIG_H
  14
  15 #define CONFIG_QEMU_MIPS
  16
  17 #define CONFIG_MISC_INIT_R
  18
  19 #define CONFIG_TIMESTAMP                /* Print image info with timestamp */
  20
  21 #define CONFIG_EXTRA_ENV_SETTINGS                                       \
  22         "addmisc=setenv bootargs ${bootargs} "                          \
  23                 "console=ttyS0,${baudrate} "                            \
  24                 "panic=1\0"                                             \
  25         "bootfile=/tftpboot/vmlinux\0"                                  \
  26         "load=tftp ffffffff80500000 ${u-boot}\0"                        \
  27         ""
  28
  29 #define CONFIG_BOOTCOMMAND      "bootp;bootelf"
  30
  31 /*
  32  * BOOTP options
  33  */
  34 #define CONFIG_BOOTP_BOOTFILESIZE
  35
  36 /*
  37  * Command line configuration.
  38  */
  39
  40 #define CONFIG_DRIVER_NE2000
  41 #define CONFIG_DRIVER_NE2000_BASE       0xffffffffb4000300
  42
  43 #define CONFIG_SYS_NS16550_SERIAL
  44 #define CONFIG_SYS_NS16550_REG_SIZE     1
  45 #define CONFIG_SYS_NS16550_CLK          115200
  46 #define CONFIG_SYS_NS16550_COM1         0xffffffffb40003f8
  47 #define CONFIG_CONS_INDEX               1
  48
  49 #ifdef CONFIG_SYS_BIG_ENDIAN
  50 #define CONFIG_IDE_SWAP_IO
  51 #endif
  52
  53 #define CONFIG_SYS_IDE_MAXBUS           2
  54 #define CONFIG_SYS_ATA_IDE0_OFFSET      0x1f0
  55 #define CONFIG_SYS_ATA_IDE1_OFFSET      0x170
  56 #define CONFIG_SYS_ATA_DATA_OFFSET      0
  57 #define CONFIG_SYS_ATA_REG_OFFSET       0
  58 #define CONFIG_SYS_ATA_BASE_ADDR        0xffffffffb4000000
  59
  60 #define CONFIG_SYS_IDE_MAXDEVICE        4
  61
  62 /*
  63  * Miscellaneous configurable options
  64  */
  65
  66 #define CONFIG_SYS_MALLOC_LEN           (256 << 10)
  67
  68 #define CONFIG_SYS_BOOTPARAMS_LEN       128*1024
  69
  70 #define CONFIG_SYS_MHZ                  132
  71
  72 #define CONFIG_SYS_MIPS_TIMER_FREQ      (CONFIG_SYS_MHZ * 1000000)
  73
  74 /* Cached addr */
  75 #define CONFIG_SYS_SDRAM_BASE           0xffffffff80000000
  76
  77 /* default load address */
  78 #define CONFIG_SYS_LOAD_ADDR            0xffffffff81000000
  79
  80 #define CONFIG_SYS_MEMTEST_START        0xffffffff80100000
  81 #define CONFIG_SYS_MEMTEST_END          0xffffffff80800000
  82
  83 /*-----------------------------------------------------------------------
  84  * FLASH and environment organization
  85  */
  86 /* The following #defines are needed to get flash environment right */
  87 #define CONFIG_SYS_MONITOR_BASE CONFIG_SYS_TEXT_BASE
  88
  89 #define CONFIG_SYS_INIT_SP_OFFSET       0x400000
  90
  91 /* We boot from this flash, selected with dip switch */
  92 #define CONFIG_SYS_FLASH_BASE           0xffffffffbfc00000
  93 #define CONFIG_SYS_MAX_FLASH_BANKS      1
  94 #define CONFIG_SYS_MAX_FLASH_SECT       128
  95 #define CONFIG_SYS_FLASH_CFI
  96 #define CONFIG_FLASH_CFI_DRIVER
  97 #define CONFIG_SYS_FLASH_USE_BUFFER_WRITE
  98
  99 /* Address and size of Primary Environment Sector */
 100 #define CONFIG_ENV_SIZE         0x8000
 101 #define CONFIG_ENV_ADDR         (CONFIG_SYS_FLASH_BASE + (4 << 20) - CONFIG_ENV_SIZE)
 102
 103 #define CONFIG_ENV_OVERWRITE    1
 104
 105 #define MEM_SIZE                128
 106
 107 #endif /* __CONFIG_H */