include/configs/pxm2.h

   1 /*
   2  * siemens pxm2
   3  * (C) Copyright 2013 Siemens Schweiz AG
   4  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   5  *
   6  * Based on:
   7  * U-Boot file:/include/configs/am335x_evm.h
   8  *
   9  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  10  *
  11  * SPDX-License-Identifier:     GPL-2.0+
  12  */
  13
  14 #ifndef __CONFIG_PXM2_H
  15 #define __CONFIG_PXM2_H
  16
  17 #define CONFIG_SIEMENS_PXM2
  18 #define MACH_TYPE_PXM2                  4309
  19 #define CONFIG_SIEMENS_MACH_TYPE        MACH_TYPE_PXM2
  20
  21 #include "siemens-am33x-common.h"
  22
  23 #define CONFIG_SYS_MPUCLK       720
  24 #define DDR_IOCTRL_VAL          0x18b
  25 #define DDR_PLL_FREQ            266
  26
  27 #define BOARD_DFU_BUTTON_GPIO   59
  28 #define BOARD_LCD_POWER         111
  29 #define BOARD_BACK_LIGHT        112
  30 #define BOARD_TOUCH_POWER       57
  31
  32 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  33         "button_dfu0=59\0" \
  34         "led0=117,0,1\0" \
  35
  36  /* Physical Memory Map */
  37 #define CONFIG_MAX_RAM_BANK_SIZE        (512 << 20)     /* 1GB */
  38
  39 /* I2C Configuration */
  40 #define CONFIG_SYS_I2C_SPEED            400000
  41 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
  42
  43 #define CONFIG_SYS_U_BOOT_MAX_SIZE_SECTORS      0x300
  44
  45 #define CONFIG_PHY_ATHEROS
  46
  47 #define CONFIG_FACTORYSET
  48
  49 /* Watchdog */
  50 #define CONFIG_OMAP_WATCHDOG
  51
  52 #ifndef CONFIG_SPL_BUILD
  53
  54 /* Use common default */
  55 #define MTDPARTS_DEFAULT        MTDPARTS_DEFAULT_V1
  56
  57 /* Default env settings */
  58 #define CONFIG_EXTRA_ENV_SETTINGS \
  59         "hostname=pxm2\0" \
  60         "ubi_off=2048\0"\
  61         "nand_img_size=0x500000\0" \
  62         "optargs=\0" \
  63         "preboot=draco_led 0\0" \
  64         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  65         "splashpos=m,m\0"       \
  66         CONFIG_ENV_SETTINGS_V1 \
  67         CONFIG_ENV_SETTINGS_NAND_V1 \
  68         "mmc_dev=0\0" \
  69         "mmc_root=/dev/mmcblk0p2 rw\0" \
  70         "mmc_root_fs_type=ext4 rootwait\0" \
  71         "mmc_load_uimage=" \
  72                 "mmc rescan; " \
  73                 "setenv bootfile uImage;" \
  74                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
  75         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
  76         "importbootenv=echo Importing environment from mmc ...; " \
  77                 "env import -t $loadaddr $filesize\0" \
  78         "mmc_args=run bootargs_defaults;" \
  79                 "mtdparts default;" \
  80                 "setenv bootargs ${bootargs} " \
  81                 "root=${mmc_root} ${mtdparts}" \
  82                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
  83                 "eth=${ethaddr} " \
  84                 "\0" \
  85         "mmc_boot=run mmc_args; " \
  86                 "run mmc_load_uimage; " \
  87                 "bootm ${kloadaddr}\0" \
  88         ""
  89
  90 #ifndef CONFIG_RESTORE_FLASH
  91 /* set to negative value for no autoboot */
  92
  93 #define CONFIG_BOOTCOMMAND \
  94         "if dfubutton; then " \
  95                 "run dfu_start; " \
  96                 "reset; " \
  97         "fi; " \
  98         "if mmc rescan; then " \
  99                 "echo SD/MMC found on device ${mmc_dev};" \
 100                 "if run loadbootenv; then " \
 101                         "echo Loaded environment from ${bootenv};" \
 102                         "run importbootenv;" \
 103                 "fi;" \
 104                 "if test -n $uenvcmd; then " \
 105                         "echo Running uenvcmd ...;" \
 106                         "run uenvcmd;" \
 107                 "fi;" \
 108                 "if run mmc_load_uimage; then " \
 109                         "run mmc_args;" \
 110                         "bootm ${kloadaddr};" \
 111                 "fi;" \
 112         "fi;" \
 113         "run nand_boot;" \
 114         "reset;"
 115
 116 #else
 117
 118 #define CONFIG_BOOTCOMMAND                      \
 119         "setenv autoload no; "                  \
 120         "dhcp; "                                \
 121         "if tftp 80000000 debrick.scr; then "   \
 122                 "source 80000000; "             \
 123         "fi"
 124 #endif
 125 #endif  /* CONFIG_SPL_BUILD */
 126
 127 #define CONFIG_VIDEO
 128 #if defined(CONFIG_VIDEO)
 129 #define CONFIG_VIDEO_DA8XX
 130 #define CONFIG_CFB_CONSOLE
 131 #define CONFIG_VGA_AS_SINGLE_DEVICE
 132 #define CONFIG_SPLASH_SCREEN
 133 #define CONFIG_SPLASH_SCREEN_ALIGN
 134 #define CONFIG_VIDEO_LOGO
 135 #define CONFIG_VIDEO_BMP_RLE8
 136 #define CONFIG_VIDEO_BMP_LOGO
 137 #define CONFIG_CMD_BMP
 138 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
 139 #define PWM_TICKS       0x1388
 140 #define PWM_DUTY        0x200
 141 #define CONFIG_SYS_CONSOLE_BG_COL       0xff
 142 #define CONFIG_SYS_CONSOLE_FG_COL       0x00
 143 #endif
 144
 145 #endif  /* ! __CONFIG_PXM2_H */