include/configs/pxm2.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * siemens pxm2
   4  * (C) Copyright 2013 Siemens Schweiz AG
   5  * (C) Heiko Schocher, DENX Software Engineering, hs@denx.de.
   6  *
   7  * Based on:
   8  * U-Boot file:/include/configs/am335x_evm.h
   9  *
  10  * Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/
  11  */
  12
  13 #ifndef __CONFIG_PXM2_H
  14 #define __CONFIG_PXM2_H
  15
  16 #include "siemens-am33x-common.h"
  17
  18 #define DDR_IOCTRL_VAL          0x18b
  19 #define DDR_PLL_FREQ            266
  20
  21 #define BOARD_DFU_BUTTON_GPIO   59
  22 #define BOARD_LCD_POWER         111
  23 #define BOARD_BACK_LIGHT        112
  24 #define BOARD_TOUCH_POWER       57
  25
  26 #define CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  27         "button_dfu0=59\0" \
  28         "led0=117,0,1\0" \
  29
  30  /* Physical Memory Map */
  31 #define CONFIG_MAX_RAM_BANK_SIZE        (512 << 20)     /* 1GB */
  32
  33 #define CONFIG_FACTORYSET
  34
  35 #ifndef CONFIG_SPL_BUILD
  36
  37 /* Use common default */
  38
  39 /* Default env settings */
  40 #define CONFIG_EXTRA_ENV_SETTINGS \
  41         "hostname=pxm2\0" \
  42         "ubi_off=2048\0"\
  43         "nand_img_size=0x500000\0" \
  44         "optargs=\0" \
  45         "preboot=draco_led 0\0" \
  46         CONFIG_ENV_SETTINGS_BUTTONS_AND_LEDS \
  47         "splashpos=m,m\0"       \
  48         CONFIG_ENV_SETTINGS_V1 \
  49         CONFIG_ENV_SETTINGS_NAND_V1 \
  50         "mmc_dev=0\0" \
  51         "mmc_root=/dev/mmcblk0p2 rw\0" \
  52         "mmc_root_fs_type=ext4 rootwait\0" \
  53         "mmc_load_uimage=" \
  54                 "mmc rescan; " \
  55                 "setenv bootfile uImage;" \
  56                 "fatload mmc ${mmc_dev} ${kloadaddr} ${bootfile}\0" \
  57         "loadbootenv=fatload mmc ${mmc_dev} ${loadaddr} ${bootenv}\0" \
  58         "importbootenv=echo Importing environment from mmc ...; " \
  59                 "env import -t $loadaddr $filesize\0" \
  60         "mmc_args=run bootargs_defaults;" \
  61                 "mtdparts default;" \
  62                 "setenv bootargs ${bootargs} " \
  63                 "root=${mmc_root} ${mtdparts}" \
  64                 "rootfstype=${mmc_root_fs_type} ip=${ip_method} " \
  65                 "eth=${ethaddr} " \
  66                 "\0" \
  67         "mmc_boot=run mmc_args; " \
  68                 "run mmc_load_uimage; " \
  69                 "bootm ${kloadaddr}\0" \
  70         ""
  71
  72 #ifndef CONFIG_RESTORE_FLASH
  73 /* set to negative value for no autoboot */
  74
  75 #define CONFIG_BOOTCOMMAND \
  76         "if dfubutton; then " \
  77                 "run dfu_start; " \
  78                 "reset; " \
  79         "fi; " \
  80         "if mmc rescan; then " \
  81                 "echo SD/MMC found on device ${mmc_dev};" \
  82                 "if run loadbootenv; then " \
  83                         "echo Loaded environment from ${bootenv};" \
  84                         "run importbootenv;" \
  85                 "fi;" \
  86                 "if test -n $uenvcmd; then " \
  87                         "echo Running uenvcmd ...;" \
  88                         "run uenvcmd;" \
  89                 "fi;" \
  90                 "if run mmc_load_uimage; then " \
  91                         "run mmc_args;" \
  92                         "bootm ${kloadaddr};" \
  93                 "fi;" \
  94         "fi;" \
  95         "run nand_boot;" \
  96         "reset;"
  97
  98 #else
  99
 100 #define CONFIG_BOOTCOMMAND                      \
 101         "setenv autoload no; "                  \
 102         "dhcp; "                                \
 103         "if tftp 80000000 debrick.scr; then "   \
 104                 "source 80000000; "             \
 105         "fi"
 106 #endif
 107 #endif  /* CONFIG_SPL_BUILD */
 108
 109 #if defined(CONFIG_VIDEO)
 110 #define CONFIG_VIDEO_DA8XX
 111 #define CONFIG_VIDEO_LOGO
 112 #define CONFIG_VIDEO_BMP_LOGO
 113 #define DA8XX_LCD_CNTL_BASE     LCD_CNTL_BASE
 114 #define PWM_TICKS       0x1388
 115 #define PWM_DUTY        0x200
 116 #endif
 117
 118 #endif  /* ! __CONFIG_PXM2_H */