include/configs/presidio_asic.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * Copyright (C) 2020 Cortina Access Inc.
   4  *
   5  * Configuration for Cortina-Access Presidio board
   6  */
   7
   8 #ifndef __PRESIDIO_ASIC_H
   9 #define __PRESIDIO_ASIC_H
  10
  11 #define CONFIG_SYS_INIT_SP_ADDR         0x00100000
  12 #define CONFIG_SYS_BOOTM_LEN            0x00c00000
  13
  14 /* Generic Timer Definitions */
  15 #define COUNTER_FREQUENCY               25000000
  16 #define CONFIG_SYS_TIMER_RATE           COUNTER_FREQUENCY
  17 #define CONFIG_SYS_TIMER_COUNTER        0xf4321008
  18
  19 /* note: arch/arm/cpu/armv8/start.S which references GICD_BASE/GICC_BASE
  20  * does not yet support DT. Thus define it here.
  21  */
  22 #define GICD_BASE                       0xf7011000
  23 #define GICC_BASE                       0xf7012000
  24
  25 #define CONFIG_SYS_TIMER_BASE           0xf4321000
  26
  27 /* Use external clock source */
  28 #define PRESIDIO_APB_CLK                125000000
  29 #define CORTINA_PER_IO_FREQ             PRESIDIO_APB_CLK
  30
  31 /* Cortina Serial Configuration */
  32 #define CORTINA_UART_CLOCK              (PRESIDIO_APB_CLK)
  33 #define CORTINA_SERIAL_PORTS            {(void *)CONFIG_SYS_SERIAL0, \
  34                                          (void *)CONFIG_SYS_SERIAL1}
  35
  36 #define CONFIG_SYS_SERIAL0              PER_UART0_CFG
  37 #define CONFIG_SYS_SERIAL1              PER_UART1_CFG
  38
  39 /* BOOTP options */
  40 #define CONFIG_BOOTP_BOOTFILESIZE
  41
  42 /* SDRAM Bank #1 */
  43 #define DDR_BASE                        0x00000000
  44 #define PHYS_SDRAM_1                    DDR_BASE
  45 #define PHYS_SDRAM_1_SIZE               0x80000000 /* 2GB */
  46 #define CONFIG_SYS_SDRAM_BASE           PHYS_SDRAM_1
  47
  48 /* Console I/O Buffer Size */
  49 #define CONFIG_SYS_CBSIZE               256
  50 #define CONFIG_SYS_PBSIZE               (CONFIG_SYS_CBSIZE + \
  51                                         sizeof(CONFIG_SYS_PROMPT) + 16)
  52 #define CONFIG_SYS_BARGSIZE             CONFIG_SYS_CBSIZE
  53
  54 #define KSEG1_ATU_XLAT(x) (x)
  55
  56 /* HW REG ADDR */
  57 #define NI_READ_POLL_COUNT                      1000
  58 #define CA_NI_MDIO_REG_BASE                     0xF4338
  59 #define NI_HV_GLB_MAC_ADDR_CFG0_OFFSET          0x010
  60 #define NI_HV_GLB_MAC_ADDR_CFG1_OFFSET          0x014
  61 #define NI_HV_PT_BASE                           0x400
  62 #define NI_HV_XRAM_BASE                         0x820
  63 #define GLOBAL_BLOCK_RESET_OFFSET               0x04
  64 #define GLOBAL_GLOBAL_CONFIG_OFFSET             0x20
  65 #define GLOBAL_IO_DRIVE_CONTROL_OFFSET          0x4c
  66
  67 /* max command args */
  68 #define CONFIG_SYS_MAXARGS              64
  69 #define CONFIG_EXTRA_ENV_SETTINGS       "silent=y\0"
  70
  71 /* nand driver parameters */
  72 #ifdef CONFIG_TARGET_PRESIDIO_ASIC
  73         #define CONFIG_SYS_MAX_NAND_DEVICE      1
  74         #define CONFIG_SYS_NAND_BASE            CONFIG_SYS_FLASH_BASE
  75         #define CONFIG_SYS_NAND_BASE_LIST       { CONFIG_SYS_NAND_BASE }
  76 #endif
  77
  78 #endif /* __PRESIDIO_ASIC_H */