e2aae19484c64680557c9c9e6788cdfe9a0a07f2
[platform/kernel/u-boot.git] / include / configs / pfla02.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) Stefano Babic <sbabic@denx.de>
4  */
5
6
7 #ifndef __PCM058_CONFIG_H
8 #define __PCM058_CONFIG_H
9
10 #ifdef CONFIG_SPL
11 #define CONFIG_SYS_SPI_U_BOOT_OFFS      (64 * 1024)
12 #include "imx6_spl.h"
13 #endif
14
15 #include "mx6_common.h"
16
17 /* Thermal */
18 #define CONFIG_IMX_THERMAL
19
20 /* Serial */
21 #define CONFIG_MXC_UART
22 #define CONFIG_MXC_UART_BASE           UART4_BASE
23 #define CONSOLE_DEV             "ttymxc3"
24
25 /* Early setup */
26
27
28 /* Size of malloc() pool */
29 #define CONFIG_SYS_MALLOC_LEN           (8 * SZ_1M)
30
31 /* Ethernet */
32 #define IMX_FEC_BASE                    ENET_BASE_ADDR
33 #define CONFIG_FEC_XCV_TYPE             RGMII
34 #define CONFIG_ETHPRIME                 "FEC"
35 #define CONFIG_FEC_MXC_PHYADDR          3
36
37 /* SPI Flash */
38 #define CONFIG_SF_DEFAULT_BUS           2
39 #define CONFIG_SF_DEFAULT_CS            0
40 #define CONFIG_SF_DEFAULT_SPEED         20000000
41 #define CONFIG_SF_DEFAULT_MODE          SPI_MODE_0
42
43 /* I2C Configs */
44 #define CONFIG_SYS_I2C
45 #define CONFIG_SYS_I2C_MXC
46 #define CONFIG_SYS_I2C_MXC_I2C1         /* enable I2C bus 0 */
47 #define CONFIG_SYS_I2C_SPEED              100000
48
49 #ifndef CONFIG_SPL_BUILD
50 #define CONFIG_CMD_NAND
51 /* Enable NAND support */
52 #define CONFIG_CMD_NAND_TRIMFFS
53 #define CONFIG_SYS_MAX_NAND_DEVICE      1
54 #define CONFIG_SYS_NAND_BASE            0x40000000
55 #define CONFIG_SYS_NAND_5_ADDR_CYCLE
56 #define CONFIG_SYS_NAND_ONFI_DETECTION
57 #endif
58
59 /* DMA stuff, needed for GPMI/MXS NAND support */
60
61 /* Filesystem support */
62
63 /* Various command support */
64
65 /* Physical Memory Map */
66 #define PHYS_SDRAM                     MMDC0_ARB_BASE_ADDR
67
68 #define CONFIG_SYS_SDRAM_BASE          PHYS_SDRAM
69 #define CONFIG_SYS_INIT_RAM_ADDR       IRAM_BASE_ADDR
70 #define CONFIG_SYS_INIT_RAM_SIZE       IRAM_SIZE
71
72 #define CONFIG_SYS_INIT_SP_OFFSET \
73         (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE)
74 #define CONFIG_SYS_INIT_SP_ADDR \
75         (CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_INIT_SP_OFFSET)
76
77 /* MMC Configs */
78 #define CONFIG_SYS_FSL_ESDHC_ADDR       0
79 #define CONFIG_SYS_FSL_USDHC_NUM        2
80
81 /* Environment organization */
82 #define CONFIG_ENV_IS_IN_SPI_FLASH
83 #define CONFIG_ENV_SIZE                (16 * 1024)
84 #define CONFIG_ENV_OFFSET               (1024 * SZ_1K)
85 #define CONFIG_ENV_SECT_SIZE            (64 * SZ_1K)
86 #define CONFIG_ENV_SPI_BUS             CONFIG_SF_DEFAULT_BUS
87 #define CONFIG_ENV_SPI_CS              CONFIG_SF_DEFAULT_CS
88 #define CONFIG_ENV_SPI_MODE            CONFIG_SF_DEFAULT_MODE
89 #define CONFIG_ENV_SPI_MAX_HZ          CONFIG_SF_DEFAULT_SPEED
90 #define CONFIG_SYS_REDUNDAND_ENVIRONMENT
91 #define CONFIG_ENV_OFFSET_REDUND       (CONFIG_ENV_OFFSET + \
92                                                 CONFIG_ENV_SECT_SIZE)
93 #define CONFIG_ENV_SIZE_REDUND         CONFIG_ENV_SIZE
94
95 #ifdef CONFIG_ENV_IS_IN_NAND
96 #define CONFIG_ENV_OFFSET              (0x1E0000)
97 #define CONFIG_ENV_SECT_SIZE           (128 * SZ_1K)
98 #endif
99
100 /* Default environment */
101 #define CONFIG_EXTRA_ENV_SETTINGS \
102         "addcons=setenv bootargs ${bootargs} "                          \
103                 "console=${console},${baudrate}\0"                      \
104         "addip=setenv bootargs ${bootargs} "                            \
105                 "ip=${ipaddr}:${serverip}:${gatewayip}:"                \
106                 "${netmask}:${hostname}:${netdev}:off\0"                \
107         "addmisc=setenv bootargs ${bootargs} ${miscargs}\0"             \
108         "addmtd=run mtdnand;run mtdspi;"                                \
109                 "setenv bootargs ${bootargs} ${mtdparts}\0"             \
110         "mtdnand=setenv mtdparts mtdparts=gpmi-nand:"                   \
111                 "40m(Kernels),400m(root),-(nand)\0"                     \
112         "mtdspi=setenv mtdparts ${mtdparts}"                            \
113                 "';spi2.0:1024k(bootloader),"                           \
114                         "64k(env1),64k(env2),-(rescue)'\0"              \
115         "bootcmd=if test -n ${rescue};"                                 \
116                 "then run swupdate;fi;run nandboot;run swupdate\0"      \
117         "bootfile=uImage\0"                                             \
118         "bootimage=uImage\0"                                            \
119         "console=ttymxc3\0"                                             \
120         "fdt_addr_r=0x18000000\0"                                       \
121         "fdt_file=pfla02.dtb\0"                                         \
122         "fdt_high=0xffffffff\0"                                         \
123         "initrd_high=0xffffffff\0"                                      \
124         "kernel_addr_r=" __stringify(CONFIG_LOADADDR) "\0"              \
125         "miscargs=panic=1 quiet\0"                                      \
126         "mmcargs=setenv bootargs root=${mmcroot} rw rootwait\0"         \
127         "mmcboot=if run mmcload;then "                                  \
128                 "run mmcargs addcons addmisc;"                          \
129                         "bootm;fi\0"                                    \
130         "mmcload=mmc rescan;"                                           \
131                 "load mmc 0:${mmcpart} ${kernel_addr_r} boot/fitImage\0"\
132         "mmcpart=1\0"                                                   \
133         "mmcroot=/dev/mmcblk0p1\0"                                      \
134         "ubiroot=1\0"                                                   \
135         "nandargs=setenv bootargs ubi.mtd=1 "                           \
136                 "root=ubi0:rootfs${ubiroot} rootfstype=ubifs\0"         \
137         "nandboot=run mtdnand;ubi part nand0,0;"                        \
138                 "ubi readvol ${kernel_addr_r} kernel${ubiroot};"        \
139                 "run nandargs addip addcons addmtd addmisc;"            \
140                 "bootm ${kernel_addr_r}\0"                              \
141         "net_nfs=tftp ${kernel_addr_r} ${board_name}/${bootfile};"      \
142                 "tftp ${fdt_addr_r} ${board_name}/${fdt_file};"         \
143                 "run nfsargs addip addcons addmtd addmisc;"             \
144                 "bootm ${kernel_addr_r} - ${fdt_addr_r}\0"              \
145         "net_nfs_fit=tftp ${kernel_addr_r} ${board_name}/${fitfile};"   \
146                 "run nfsargs addip addcons addmtd addmisc;"             \
147                 "bootm ${kernel_addr_r}\0"                              \
148         "nfsargs=setenv bootargs root=/dev/nfs"                         \
149                 " nfsroot=${serverip}:${nfsroot},v3 panic=1\0"          \
150         "swupdate=setenv bootargs root=/dev/ram;"                       \
151                 "run addip addcons addmtd addmisc;"                     \
152                 "sf probe;"                                             \
153                 "sf read ${kernel_addr_r} 120000 600000;"               \
154                 "sf read 14000000 730000 800000;"                       \
155                 "bootm ${kernel_addr_r} 14000000\0"
156
157 #endif