Convert CONFIG_ENV_IS_IN_MMC/NAND/UBI and NOWHERE to Kconfig
[platform/kernel/u-boot.git] / include / configs / pepper.h
1 /*
2  * Copyright (C) 2013 Gumstix, Inc. - http://www.gumstix.com/
3  *
4  * SPDX-License-Identifier:     GPL-2.0+
5  */
6
7 #ifndef __CONFIG_PEPPER_H
8 #define __CONFIG_PEPPER_H
9
10 #include <configs/ti_am335x_common.h>
11
12 /* Clock defines */
13 #define V_OSCK                          24000000  /* Clock output from T2 */
14 #define V_SCLK                          (V_OSCK)
15
16 #define CONFIG_SYS_I2C_EEPROM_ADDR      0x50
17
18 /* Mach type */
19 #define CONFIG_MACH_TYPE                MACH_TYPE_PEPPER
20
21 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
22
23 #define CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG
24 #define CONFIG_EXTRA_ENV_SETTINGS \
25         DEFAULT_LINUX_BOOT_ENV \
26         "bootdir=/boot\0" \
27         "bootfile=zImage\0" \
28         "fdtfile=am335x-pepper.dtb\0" \
29         "console=ttyO0,115200n8\0" \
30         "optargs=\0" \
31         "mmcdev=0\0" \
32         "mmcroot=/dev/mmcblk0p2 rw\0" \
33         "mmcrootfstype=ext4 rootwait\0" \
34         "mmcargs=setenv bootargs console=${console} " \
35                 "${optargs} " \
36                 "root=${mmcroot} " \
37                 "rootfstype=${mmcrootfstype}\0" \
38         "bootenv=uEnv.txt\0" \
39         "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
40         "importbootenv=echo Importing environment from mmc ...; " \
41                 "env import -t ${loadaddr} ${filesize}\0" \
42         "mmcload=load mmc ${mmcdev}:2 ${loadaddr} ${bootdir}/${bootfile}; " \
43                 "load mmc ${mmcdev}:2 ${fdtaddr} ${bootdir}/${fdtfile}\0" \
44         "loaduimage=fatload mmc ${mmcdev}:1 ${loadaddr} uImage\0" \
45         "uimageboot=echo Booting from mmc${mmcdev} ...; " \
46                 "run mmcargs; " \
47                 "bootm ${loadaddr}\0" \
48         "mmcboot=echo Booting from mmc ...; " \
49                 "run mmcargs; " \
50                 "bootz ${loadaddr} - ${fdtaddr}\0" \
51         "ubiboot=echo Booting from nand (ubifs) ...; " \
52                 "run ubiargs; run ubiload; " \
53                 "bootz ${loadaddr} - ${fdtaddr}\0" \
54
55 #define CONFIG_BOOTCOMMAND \
56         "mmc dev ${mmcdev}; if mmc rescan; then " \
57                 "echo SD/MMC found on device ${mmcdev};" \
58                 "if run loadbootenv; then " \
59                         "echo Loaded environment from ${bootenv};" \
60                         "run importbootenv;" \
61                 "fi;" \
62                 "if test -n $uenvcmd; then " \
63                         "echo Running uenvcmd ...;" \
64                         "run uenvcmd;" \
65                 "fi;" \
66                 "if run mmcload; then " \
67                         "run mmcboot;" \
68                 "fi;" \
69                 "if run loaduimage; then " \
70                         "run uimageboot;" \
71                 "fi;" \
72         "fi;" \
73
74 /* Serial console configuration */
75 #define CONFIG_CONS_INDEX               1 /* UART0 */
76 #define CONFIG_SERIAL1                  1
77 #define CONFIG_SYS_NS16550_COM1         0x44e09000
78
79 /* Ethernet support */
80 #define CONFIG_PHY_GIGE
81 #define CONFIG_PHYLIB
82 #define CONFIG_PHY_ADDR                 0
83 #define CONFIG_PHY_MICREL
84 #define CONFIG_PHY_MICREL_KSZ9021
85 #define CONFIG_PHY_RESET_DELAY 1000
86
87 /* SPL */
88 #define CONFIG_SPL_LDSCRIPT             "arch/arm/mach-omap2/u-boot-spl.lds"
89
90 #endif /* __CONFIG_PEPPER_H */