Merge branch 'master' of git://git.denx.de/u-boot-sunxi
[platform/kernel/u-boot.git] / include / configs / origen.h
1 /* SPDX-License-Identifier: GPL-2.0+ */
2 /*
3  * Copyright (C) 2011 Samsung Electronics
4  *
5  * Configuration settings for the SAMSUNG ORIGEN (EXYNOS4210) board.
6  */
7
8 #ifndef __CONFIG_ORIGEN_H
9 #define __CONFIG_ORIGEN_H
10
11 #include <configs/exynos4-common.h>
12
13 /* High Level Configuration Options */
14 #define CONFIG_EXYNOS4210               1       /* which is a EXYNOS4210 SoC */
15 #define CONFIG_ORIGEN                   1       /* working with ORIGEN*/
16
17 #define CONFIG_SYS_DCACHE_OFF           1
18
19 /* ORIGEN has 4 bank of DRAM */
20 #define CONFIG_SYS_SDRAM_BASE           0x40000000
21 #define PHYS_SDRAM_1                    CONFIG_SYS_SDRAM_BASE
22 #define SDRAM_BANK_SIZE                 (256 << 20)     /* 256 MB */
23
24 /* memtest works on */
25 #define CONFIG_SYS_MEMTEST_START        CONFIG_SYS_SDRAM_BASE
26 #define CONFIG_SYS_MEMTEST_END          (CONFIG_SYS_SDRAM_BASE + 0x6000000)
27 #define CONFIG_SYS_LOAD_ADDR            (CONFIG_SYS_SDRAM_BASE + 0x3E00000)
28
29 #define CONFIG_MACH_TYPE                MACH_TYPE_ORIGEN
30
31 /* select serial console configuration */
32
33 /* Console configuration */
34 #define CONFIG_DEFAULT_CONSOLE          "console=ttySAC1,115200n8\0"
35
36 #define CONFIG_SYS_MEM_TOP_HIDE (1 << 20)       /* ram console */
37
38 #define CONFIG_SYS_MONITOR_BASE 0x00000000
39
40 /* Power Down Modes */
41 #define S5P_CHECK_SLEEP                 0x00000BAD
42 #define S5P_CHECK_DIDLE                 0xBAD00000
43 #define S5P_CHECK_LPA                   0xABAD0000
44
45 /* MMC SPL */
46 #define COPY_BL2_FNPTR_ADDR     0x02020030
47 #define CONFIG_SPL_TEXT_BASE    0x02021410
48
49 #define CONFIG_EXTRA_ENV_SETTINGS \
50         "loadaddr=0x40007000\0" \
51         "rdaddr=0x48000000\0" \
52         "kerneladdr=0x40007000\0" \
53         "ramdiskaddr=0x48000000\0" \
54         "console=ttySAC2,115200n8\0" \
55         "mmcdev=0\0" \
56         "bootenv=uEnv.txt\0" \
57         "loadbootenv=load mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \
58         "importbootenv=echo Importing environment from mmc ...; " \
59                 "env import -t $loadaddr $filesize\0" \
60         "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
61         "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \
62                 "source ${loadaddr}\0"
63 #define CONFIG_BOOTCOMMAND \
64         "if mmc rescan; then " \
65                 "echo SD/MMC found on device ${mmcdev};" \
66                 "if run loadbootenv; then " \
67                         "echo Loaded environment from ${bootenv};" \
68                         "run importbootenv;" \
69                 "fi;" \
70                 "if test -n $uenvcmd; then " \
71                         "echo Running uenvcmd ...;" \
72                         "run uenvcmd;" \
73                 "fi;" \
74                 "if run loadbootscript; then " \
75                         "run bootscript; " \
76                 "fi; " \
77         "fi;" \
78         "load mmc ${mmcdev} ${loadaddr} uImage; bootm ${loadaddr} "
79
80 #define CONFIG_CLK_1000_400_200
81
82 /* MIU (Memory Interleaving Unit) */
83 #define CONFIG_MIU_2BIT_21_7_INTERLEAVED
84
85 #define CONFIG_SYS_MMC_ENV_DEV          0
86 #define CONFIG_ENV_SIZE                 (16 << 10)      /* 16 KB */
87 #define RESERVE_BLOCK_SIZE              (512)
88 #define BL1_SIZE                        (16 << 10) /*16 K reserved for BL1*/
89 #define CONFIG_ENV_OFFSET               (RESERVE_BLOCK_SIZE + BL1_SIZE)
90
91 #define CONFIG_SPL_MAX_FOOTPRINT        (14 * 1024)
92
93 #define CONFIG_SYS_INIT_SP_ADDR         0x02040000
94
95 /* U-Boot copy size from boot Media to DRAM.*/
96 #define COPY_BL2_SIZE           0x80000
97 #define BL2_START_OFFSET        ((CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)/512)
98 #define BL2_SIZE_BLOC_COUNT     (COPY_BL2_SIZE/512)
99
100 #endif  /* __CONFIG_H */