include/configs/omap3_zoom1.h

   1 /*
   2  * (C) Copyright 2006-2008
   3  * Texas Instruments.
   4  * Richard Woodruff <r-woodruff2@ti.com>
   5  * Syed Mohammed Khasim <x0khasim@ti.com>
   6  * Nishanth Menon <nm@ti.com>
   7  *
   8  * Configuration settings for the TI OMAP3430 Zoom MDK board.
   9  *
  10  * SPDX-License-Identifier:     GPL-2.0+
  11  */
  12
  13 #ifndef __CONFIG_H
  14 #define __CONFIG_H
  15
  16 #define CONFIG_NR_DRAM_BANKS    2       /* CS1 may or may not be populated */
  17 #include <asm/arch/cpu.h>               /* get chip and board defs */
  18 #include <asm/arch/omap.h>
  19 #include <configs/ti_omap3_common.h>
  20
  21 /* Remove SPL boot option - we do not support that on LDP yet */
  22 #undef CONFIG_SPL_FRAMEWORK
  23
  24 /* Generic NAND definition conflicts with debug_base */
  25 #undef CONFIG_SYS_NAND_BASE
  26
  27 #define CONFIG_MISC_INIT_R
  28
  29 #define CONFIG_REVISION_TAG             1
  30
  31 #define CONFIG_ENV_SIZE                 (128 << 10)     /* 128 KiB */
  32
  33 /*
  34  * Hardware drivers
  35  */
  36
  37 /* USB */
  38 #define CONFIG_USB_MUSB_UDC                     1
  39 #define CONFIG_USB_OMAP3                1
  40 #define CONFIG_TWL4030_USB              1
  41
  42 /* USB device configuration */
  43 #define CONFIG_USB_DEVICE               1
  44 #define CONFIG_USB_TTY                  1
  45 /* Change these to suit your needs */
  46 #define CONFIG_USBD_VENDORID            0x0451
  47 #define CONFIG_USBD_PRODUCTID           0x5678
  48 #define CONFIG_USBD_MANUFACTURER        "Texas Instruments"
  49 #define CONFIG_USBD_PRODUCT_NAME        "Zoom1"
  50
  51 #define MTDIDS_DEFAULT                  "nand0=nand"
  52 #define MTDPARTS_DEFAULT                "mtdparts=nand:512k(x-loader),"\
  53                                         "1920k(u-boot),128k(u-boot-env),"\
  54                                         "4m(kernel),-(fs)"
  55
  56 #if defined(CONFIG_CMD_NAND)
  57 /* NAND: SPL falcon mode configs */
  58 #ifdef CONFIG_SPL_OS_BOOT
  59 #define CONFIG_SYS_NAND_SPL_KERNEL_OFFS 0x280000
  60 #endif
  61 #endif
  62
  63 /*
  64  * TWL4030
  65  */
  66 #define CONFIG_TWL4030_LED              1
  67
  68 /*
  69  * Board NAND Info.
  70  */
  71 #define CONFIG_SYS_NAND_ADDR            NAND_BASE       /* physical address */
  72                                                         /* to access nand */
  73 #define CONFIG_SYS_NAND_BASE            NAND_BASE       /* physical address */
  74                                                         /* to access nand at */
  75                                                         /* CS0 */
  76 #define CONFIG_SYS_NAND_BUSWIDTH_16BIT
  77
  78 /* Environment information */
  79
  80 #define CONFIG_EXTRA_ENV_SETTINGS \
  81         "loadaddr=0x82000000\0" \
  82         "fdtaddr=0x80f80000\0" \
  83         "bootfile=uImage\0" \
  84         "fdtfile=omap3-ldp.dtb\0" \
  85         "bootdir=/\0" \
  86         "bootpart=0:1\0" \
  87         "usbtty=cdc_acm\0" \
  88         "console=ttyO2,115200n8\0" \
  89         "mmcdev=0\0" \
  90         "videomode=1024x768@60,vxres=1024,vyres=768\0" \
  91         "videospec=omapfb:vram:2M,vram:4M\0" \
  92         "mmcargs=setenv bootargs console=${console} " \
  93                 "video=${videospec},mode:${videomode} " \
  94                 "root=/dev/mmcblk0p2 rw " \
  95                 "rootfstype=ext3 rootwait\0" \
  96         "nandargs=setenv bootargs console=${console} " \
  97                 "video=${videospec},mode:${videomode} " \
  98                 "root=/dev/mtdblock4 rw " \
  99                 "rootfstype=jffs2\0" \
 100         "loadbootscript=fatload mmc ${mmcdev} ${loadaddr} boot.scr\0" \
 101         "bootscript=echo Running bootscript from mmc ...; " \
 102                 "source ${loadaddr}\0" \
 103         "loadimage=load mmc ${bootpart} ${loadaddr} ${bootdir}/${bootfile}\0" \
 104         "loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile}\0" \
 105         "loadzimage=setenv bootfile zImage; if run loadimage; then run loadfdt;fi\0"\
 106         "mmcboot=echo Booting from mmc ...; " \
 107                 "run mmcargs; " \
 108                 "bootm ${loadaddr}\0" \
 109         "mmczboot=echo Booting from mmc ...; " \
 110                 "run mmcargs; " \
 111                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 112         "nandboot=echo Booting from nand ...; " \
 113                 "run nandargs; " \
 114                 "nand read ${loadaddr} 280000 400000; " \
 115                 "bootm ${loadaddr}\0" \
 116
 117 #define CONFIG_BOOTCOMMAND \
 118         "mmc dev ${mmcdev}; if mmc rescan; then " \
 119                 "if run loadbootscript; then " \
 120                         "run bootscript; " \
 121                 "else " \
 122                         "if run loadimage; then " \
 123                                 "run mmcboot; " \
 124                         "else if run loadzimage; then " \
 125                                 "run mmczboot; " \
 126                         "else run nandboot; " \
 127                         "fi; fi;" \
 128                 "fi; " \
 129         "else run nandboot; fi"
 130
 131 /*
 132  * Miscellaneous configurable options
 133  */
 134 #define CONFIG_SYS_MEMTEST_START        (PHYS_SDRAM_1)  /* memtest */
 135 #define CONFIG_SYS_MEMTEST_END          (PHYS_SDRAM_2 + \
 136                                         0x01F00000) /* 31MB */
 137
 138 /*-----------------------------------------------------------------------
 139  * FLASH and environment organization
 140  */
 141
 142 /* **** PISMO SUPPORT *** */
 143 #if defined(CONFIG_CMD_NAND)
 144 #define CONFIG_SYS_FLASH_BASE           NAND_BASE
 145 #endif
 146
 147 /* Monitor at start of flash */
 148 #define CONFIG_SYS_MONITOR_BASE         CONFIG_SYS_FLASH_BASE
 149 #define CONFIG_SYS_ONENAND_BASE         ONENAND_MAP
 150
 151 #define ONENAND_ENV_OFFSET              0x260000 /* environment starts here */
 152
 153 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 154 #define CONFIG_ENV_OFFSET               0x260000
 155 #define CONFIG_ENV_ADDR                 0x260000
 156
 157 #ifdef CONFIG_CMD_NET
 158 /* Ethernet (LAN9211 from SMSC9118 family) */
 159 #define CONFIG_SMC911X
 160 #define CONFIG_SMC911X_32_BIT
 161 #define CONFIG_SMC911X_BASE             DEBUG_BASE
 162
 163 #endif
 164
 165 #endif                          /* __CONFIG_H */