include/configs/omap3_logic.h

   1 /* SPDX-License-Identifier: GPL-2.0+ */
   2 /*
   3  * (C) Copyright 2011 Logic Product Development <www.logicpd.com>
   4  *      Peter Barada <peter.barada@logicpd.com>
   5  *
   6  * Configuration settings for the Logic OMAP35x/DM37x SOM LV/Torpedo
   7  * reference boards.
   8  */
   9
  10 #ifndef __CONFIG_H
  11 #define __CONFIG_H
  12
  13 /* High Level Configuration Options */
  14
  15 #include <configs/ti_omap3_common.h>
  16
  17 /* Board NAND Info. */
  18 #ifdef CONFIG_MTD_RAW_NAND
  19 #define CONFIG_SYS_MAX_NAND_DEVICE      1         /* Max number of */
  20                                                   /* NAND devices */
  21 #define CONFIG_SYS_NAND_ECCPOS          {2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, \
  22                                          13, 14, 16, 17, 18, 19, 20, 21, 22, \
  23                                          23, 24, 25, 26, 27, 28, 30, 31, 32, \
  24                                          33, 34, 35, 36, 37, 38, 39, 40, 41, \
  25                                          42, 44, 45, 46, 47, 48, 49, 50, 51, \
  26                                          52, 53, 54, 55, 56}
  27
  28 #define CONFIG_SYS_NAND_ECCSIZE         512
  29 #define CONFIG_SYS_NAND_ECCBYTES        13
  30 #define CONFIG_SYS_NAND_MAX_OOBFREE     2
  31 #define CONFIG_SYS_NAND_MAX_ECCPOS      56
  32 #endif
  33
  34 /* Environment information */
  35
  36 #define CONFIG_EXTRA_ENV_SETTINGS \
  37         DEFAULT_LINUX_BOOT_ENV \
  38         "mmcdev=0\0" \
  39         "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
  40         "mmcrootfstype=ext4 rootwait\0" \
  41         "nandroot=ubi0:rootfs rw ubi.mtd=fs noinitrd\0" \
  42         "nandrootfstype=ubifs rootwait\0" \
  43         "autoboot=mmc dev ${mmcdev}; if mmc rescan; then " \
  44                         "if run loadbootscript; then " \
  45                                 "run bootscript; " \
  46                         "else " \
  47                                 "run defaultboot;" \
  48                         "fi; " \
  49                 "else run defaultboot; fi\0" \
  50         "defaultboot=run mmcramboot\0" \
  51         "consoledevice=ttyS0\0" \
  52         "setconsole=setenv console ${consoledevice},${baudrate}n8\0" \
  53         "dump_bootargs=echo 'Bootargs: '; echo $bootargs\0" \
  54         "rotation=0\0" \
  55         "vrfb_arg=if itest ${rotation} -ne 0; then " \
  56                 "setenv bootargs ${bootargs} omapfb.vrfb=y " \
  57                 "omapfb.rotate=${rotation}; " \
  58                 "fi\0" \
  59         "optargs=ignore_loglevel early_printk no_console_suspend\0" \
  60         "common_bootargs=run setconsole; setenv bootargs " \
  61                 "${bootargs} "\
  62                 "console=${console} " \
  63                 "${mtdparts} "\
  64                 "${optargs}; " \
  65                 "run vrfb_arg\0" \
  66         "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \
  67         "bootscript=echo 'Running bootscript from mmc ...'; " \
  68                 "source ${loadaddr}\0" \
  69         "loadimage=mmc rescan; " \
  70                 "load mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \
  71         "ramdisksize=64000\0" \
  72         "ramdiskimage=rootfs.ext2.gz.uboot\0" \
  73         "loadramdisk=mmc rescan; " \
  74                 "load mmc ${mmcdev} ${rdaddr} ${ramdiskimage}\0" \
  75         "ramargs=setenv bootargs "\
  76                 "root=/dev/ram rw ramdisk_size=${ramdisksize}\0" \
  77         "mmcargs=setenv bootargs "\
  78                 "root=PARTUUID=${uuid} " \
  79                 "rootfstype=${mmcrootfstype} rw\0" \
  80         "nandargs=setenv bootargs "\
  81                 "root=${nandroot} " \
  82                 "rootfstype=${nandrootfstype}\0" \
  83         "nfsargs=setenv serverip ${tftpserver}; " \
  84                 "setenv bootargs root=/dev/nfs " \
  85                 "nfsroot=${nfsrootpath} " \
  86                 "ip=${ipaddr}:${tftpserver}:${gatewayip}:${netmask}::eth0:off\0" \
  87         "nfsrootpath=/opt/nfs-exports/omap\0" \
  88         "fdtimage=" CONFIG_DEFAULT_DEVICE_TREE ".dtb\0" \
  89         "loadfdt=mmc rescan; " \
  90                 "load mmc ${mmcdev} ${fdtaddr} ${fdtimage}\0" \
  91         "mmcbootcommon=echo Booting with DT from mmc${mmcdev} ...; " \
  92                 "run finduuid; "\
  93                 "run mmcargs; " \
  94                 "run common_bootargs; " \
  95                 "run dump_bootargs; " \
  96                 "run loadimage; " \
  97                 "run loadfdt;\0 " \
  98         "mmcbootz=setenv bootfile zImage; " \
  99                 "run mmcbootcommon; "\
 100                 "bootz ${loadaddr} - ${fdtaddr}\0" \
 101         "mmcboot=setenv bootfile uImage; "\
 102                 "run mmcbootcommon; "\
 103                 "bootm ${loadaddr} - ${fdtaddr}\0" \
 104         "mmcrambootcommon=echo 'Booting kernel from MMC w/ramdisk...'; " \
 105                 "run ramargs; " \
 106                 "run common_bootargs; " \
 107                 "run dump_bootargs; " \
 108                 "run loadimage; " \
 109                 "run loadfdt; " \
 110                 "run loadramdisk\0" \
 111         "mmcramboot=setenv bootfile uImage; " \
 112                 "run mmcrambootcommon; " \
 113                 "bootm ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 114         "mmcrambootz=setenv bootfile zImage; " \
 115                 "run mmcrambootcommon; " \
 116                 "bootz ${loadaddr} ${rdaddr} ${fdtaddr}\0" \
 117         "tftpboot=echo 'Booting kernel/ramdisk rootfs from tftp...'; " \
 118                 "run ramargs; " \
 119                 "run common_bootargs; " \
 120                 "run dump_bootargs; " \
 121                 "tftpboot ${loadaddr} ${zimage}; " \
 122                 "tftpboot ${rdaddr} ${ramdiskimage}; " \
 123                 "bootm ${loadaddr} ${rdaddr}\0" \
 124         "tftpbootz=echo 'Booting kernel NFS rootfs...'; " \
 125                 "dhcp;" \
 126                 "run nfsargs;" \
 127                 "run common_bootargs;" \
 128                 "run dump_bootargs;" \
 129                 "tftpboot $loadaddr zImage;" \
 130                 "bootz $loadaddr\0" \
 131         "nandbootcommon=echo 'Booting kernel from NAND...';" \
 132                 "run nandargs;" \
 133                 "run common_bootargs;" \
 134                 "run dump_bootargs;" \
 135                 "nand read ${loadaddr} kernel;" \
 136                 "nand read ${fdtaddr} spl-os;\0" \
 137         "nandbootz=run nandbootcommon; "\
 138                 "bootz ${loadaddr} - ${fdtaddr}\0"\
 139         "nandboot=run nandbootcommon; "\
 140                 "bootm ${loadaddr} - ${fdtaddr}\0"\
 141
 142 /* Miscellaneous configurable options */
 143
 144 /* memtest works on */
 145
 146 /* FLASH and environment organization */
 147
 148 /* **** PISMO SUPPORT *** */
 149 #if defined(CONFIG_CMD_NAND)
 150 #define CONFIG_SYS_FLASH_BASE           0x10000000
 151 #endif
 152
 153 #define CONFIG_SYS_MAX_FLASH_SECT       256
 154 #define CONFIG_SYS_FLASH_SIZE           0x4000000
 155
 156 #define CONFIG_SYS_ENV_SECT_SIZE        (128 << 10)     /* 128 KiB */
 157
 158 #endif /* __CONFIG_H */